Used Krone Swap Bodies With Box Body for sale (995)

Condition: refurbished (used), functionality: fully functional, empty load weight: 3,400 kg, 7.82 BDF Krone smooth wall swap body, used (several available) The swap body including the roof is painted on the outside in the customer's color. Common RAL color The substructure and parts of the support feet are not painted, this is not visible after it has been placed on the ground. Parking height 1320 mm The swap body is waterproof and the roller shutter is open. External dimensions in mm approx: Lodpfxevn Scnj Adhert Length 7820 Width 2550 Height 2750 Internal dimensions in mm approx: Length 7650 Width 2480 Height 2500 Door openings in mm: Width 2370 Height 2600 Lashing: Keyhole Weight: Tare 3000 kg Max load: 13000 kg Max gross: 16000 kg Please note: Actual dimensions and other specific details may differ slightly from the above information due to continual product improvement.

Condition: refurbished (used), functionality: fully functional, 7.82 BDF Krone smooth wall swap body, used (several available) The swap body including the roof is painted on the outside in the customer's color. Common RAL color The substructure and parts of the support feet are not painted, this is not visible after setting it down on the ground. Parking height 1120 mm The swap body is waterproof and the roller door is standard. External dimensions in mm approx: Length 7820 Width 2550 Height 2925 Inner dimensions in mm approx: Length 7700 Width 2480 Height 2700 Door openings in mm: Width 2370 Height 2600 Lashing: keyhole For registration/operation maximum permissible. Total weight: 16,000 kg KLV-capable, including rail coding according to DIN EN 13044 Rail approval Code XL (for rail transport over 120 km/h) Floor frame 195 mm high floor assembly including floor; rectangular tube longitudinal beams with cross beams and outer frame as a welded construction with guide tunnel underneath 4 container corner fittings on a 20' base, symmetrical overhangs 4 gripper bars 7 pairs of lashing rings on the side in the rub rail Floor Type: BO WST 27 mm thick, waterproof glued screen-printed panel floor, strength according to DIN EN 283; for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front in the floor (according to GGVS) Case housing Structure TYPE AB WST Inner height: 2700 mm Lredjvv R Ifjpfx Adhjt Portal height i. L. 2525 mm Total height: 2,925 mm Corner height: 2,900 mm Closed structure Smooth side walls made of galvanized sheet steel cassettes Roof made of trapezoidal profiled sheet steel, construction height: 25 mm 2 ventilation gills per side wall # Rubbing strip and side wall with recesses Forklift collision protection inside, 3-sided, approx. 300 mm high Smooth front wall made of galvanized sheet steel cassettes Inside front wall with 21 mm screen-printed panel, 750 mm high, above it a continuous 12 mm screen-printed panel Outside front wall at the top with offset (optimized for cornering) Rear wall as roller door (width in length 2370 mm), with DB approval Train Plus, rollers can be replaced Flat steel collision protection for roller door guide rail Inside side walls completely covered with keyhole plates 13 steel guide rails each set into the left and right to accommodate double-decker loading beams 13 LM loading beams for double-decker loading Steel impact protection horizontally on the rear profile, left and right Please note: Actual dimensions and other specific details may differ slightly from the above information due to continual product improvement.

Condition: used, color: blue, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, first registration: 01/2025, Krone container body swap body, Dry Box WK 7.3 STG, dimensions: 7,300 x 2,470 x 2,525 mm. Features: portal doors, 3 recessed rod-type lashing rails per side. Sale exclusively to commercial businesses, with no warranty of any kind. Errors and prior sale are subject to change. Lrsdpfez D Evmsx Adhst

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, color: white, overall weight: 16,000 kg, empty load weight: 2,960 kg, loading space width: 2,448 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, For sale: swap bodies / swap trailers / storage containers / containers Krone WK 7.3 STG Lrjdpoyqvhwjfx Adhot Year of manufacture: 2006 - 2007 Permissible total weight: 16,000 kg External dimensions: Width: 2,550 mm x Length: 7,450 mm x Height: 2,750 mm Light corrosion damage, otherwise in very good condition Price per unit Several available

Condition: used, functionality: fully functional, Year of construction: 2015, color: blue, overall weight: 16,000 kg, loading space length: 7,820 mm, loading space height: 2,700 mm, reception height: 1,120 mm, We sell or rent out approximately 80 double-decker box bodies with roller shutter doors. Double-decker box body. Length: 7,820 mm. Internal height: 2,700 mm. Portal height inside: 2,525 mm. Total height: 2,925 mm. Corner height: 2,900 mm. Closed box body construction. 19 Euro pallet spaces. The box bodies are located in Southern Germany and in 49504 Lotte. Lodpsw Hxxrjfx Adhert

Condition: used, functionality: fully functional, color: white, overall weight: 16,000 kg, maximum load weight: 13,400 kg, empty load weight: 3,400 kg, loading space volume: 47 m³, loading space width: 2,480 mm, loading space length: 7,650 mm, loading space height: 2,500 mm, 7.82m BDF Krone Smooth-Side Swap Body, used (Multiple units available) Exterior color: White Parking height: 1320 mm The swap body is watertight, and the roller door operates smoothly. Lrodpfjxu Uaxox Adhet Approximate external dimensions (mm): Length 7820 Width 2550 Height 2750 Approximate internal dimensions (mm): Length 7650 Width 2480 Height 2500 Door openings (mm): Width 2370 Height 2600 Lashing: Keyhole type Tare weight: 3000 kg Maximum payload: 13,000 kg Gross weight: 16,000 kg Note: Actual dimensions and other specific details may vary slightly from the above due to continuous product improvements.

Condition: used, Year of construction: 2000, color: white, overall weight: 16,000 kg, empty load weight: 2,790 kg, loading space volume: 45.6 m³, loading space width: 2,480 mm, loading space length: 7,290 mm, loading space height: 2,520 mm, Demountable container, plywood with window and door, serving as a mobile living space, freshly painted! BDF demountable container as a mobile living space. Plywood demountable container with built-in window and door. - Includes aluminum access ladder with 5 steps and handrail - Includes interior flooring - Includes lighting with switch - Includes new paint in desired color (here RAL 9010 white) - Includes window and door on the desired side - Includes extendable support legs - Includes roll-up door at the rear Delivery date upon consultation. Ljdpst D Nc Hsfx Adhort Subject to prior sale. Prices are net, ex works D-59558 Lippstadt-Rixbeck. More items available at [website address].

Condition: good (used), functionality: fully functional, Year of construction: 2017, overall weight: 16,000 kg, maximum load weight: 13,140 kg, empty load weight: 2,860 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, GERMAN DEALER offers: Krone BDF swap body Year of manufacture: 11 / 2017 16,000 kg GVW 2,860 kg unladen Craneable Double mountings Lrsdpfxjz En T Re Adhet Rear doors Telescopic support legs Interior: 7300x2480x2520 mm Labelling is only foil Many swap bodies and carrier trailers in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES – SUPPLYING SINCE 1983! VIEWING BY APPOINTMENT ONLY! #####

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, color: white, loading space width: 2,550 mm, loading space length: 7,450 mm, loading space height: 2,750 mm, For sale: swap bodies / swap containers / storage containers / containers Krone WK 7.3 STG Also ideal as storage containers – storage space Year of manufacture: 2006 - 2007 Permissible total weight: 16,000 kg External dimensions: Width: 2,550 mm x Length: 7,450 mm x Height: 2,750 mm Minor signs of corrosion, otherwise in very good condition Ljdpfx Aey Ef Drodhort Price per piece Several units available

Condition: refurbished (used), functionality: fully functional, color: white, 7.82 m BDF Krone Smooth-Sided Swap Body, used (multiple units available) Color: White Drop-off height: 1120 mm Ljdpfsvxbfmex Adhsrt The swap body is watertight and the roller shutter door operates smoothly. Approximate external dimensions (mm): Length 7820 x Width 2550 x Height 2925 Approximate internal dimensions (mm): Length 7700 x Width 2480 x Height 2700 Door opening (mm): Width 2370 x Height 2530 Lashing: Keyhole type Permissible total weight for approval/operation: 16,000 kg Intermodal ready, incl. rail coding to DIN EN 13044 Rail approval Code XL (for rail transport at speeds over 120 km/h) Floor frame: 195 mm high floor module incl. floor panel; rectangular tube longitudinal beams with cross members and outer frame as welded construction with underfloor guide tunnel 4 container corner castings on 20' basis, symmetrical overhangs, 4 grab bar profiles 7 pairs of lashing rings at the sides in the rubbing strip Floor: Type: BO WST 27 mm thick, waterproof bonded phenolic resin-coated plywood floor, strength as per DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg 2 ventilation openings at the front in the floor (as per GGVS) Box body: Superstructure type: AB WST Internal height: 2700 mm Portal height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Smooth side walls made of galvanized steel sheet panels Roof made of trapezoidal profiled steel sheets, panel height: 25 mm 2 ventilation grills per side wall Rubbing rail and side wall with recesses; internal forklift impact protection, 3-sided, approx. 300 mm high Front wall smooth, made of galvanized steel sheet panels Interior front wall with 21 mm phenolic resin-coated plywood, 750 mm high, above that continuous 12 mm plywood Exterior front wall upper section offset (optimized for cornering) Rear wall with roller shutter door (net width: 2370 mm), with DB Train Plus approval, replaceable rollers Flat steel impact protection for roller shutter guide rails Side walls internally fully covered with keyhole plates 13 steel guide rails recessed left and right for double-deck load bars 13 LM load beams for double-deck loading Horizontal steel impact protection on rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

Condition: used, machine/vehicle number: WKESD00000088xxxx, Year of construction: 2019, Please provide reference number upon request: 22261 Specifications:• Approved upon sale• Model year: 2019• Air suspension• Tyres (see photos)• Thermo King refrigeration unit• Total hours: approx. 4,233• Engine hours: approx. 4,180• Internal length: approx. 1,349 cm• Internal height: approx. 272 cm• Overall length: approx. 1,404 cm• Width: approx. 260 cm• Axle spacing: 131 / 131 cm• Unladen weight: approx. 8,891 kg• Maximum payload: approx. 36,109 kg Description:Krone box semi-trailer with Thermo King unit with approx. 4,180 engine hours.EU-approved until May 2026.Available for delivery at short notice. Technical approved: Yes EU-approved until: 29.05.2026 Own weight: 8891 Total Weight: 45000 Payload: 36109 Width: 260 Length: 1404 Lodezqqrispfx Adhsrt Model: skapsemi med Thermo King aggregat = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, maximum load weight: 15,999 kg, empty load weight: 1 kg, loading space volume: 48 m³, loading space width: 2,450 mm, loading space length: 7,300 mm, loading space height: 2,700 mm, first registration: 06/2008, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40868 Krone, WB 7.45 * Year of manufacture: 2008 * Type: 7.45 * Fixed roof * Load securing rail * Portal doors * Furniture specification * Plywood box body * Other, miscellaneous * Gross vehicle weight: 16,000 kg * Unladen weight: 1 kg * Payload: 15,999 kg * Permissible gross weight: 16,000 kg * Internal dimensions: L = 7,300 mm, W = 2,450 mm, H = 2,700 mm * Internal volume*: 48 m³ * Corner fitting dimension E = 5,853 mm * Overhang dimension = 799 mm * Coupling height: 1,120 mm * Pallet spaces: 18 * MANUFACTURER: BRINKS * Furniture container swap body 7.45 * Mobile double-deck system with grid layout * YEAR OF MANUFACTURE UNKNOWN Disclaimer: Subject to change, prior sale, and errors excepted. Additional photos and videos can be found on our website. Our extensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained staff – we are happy to advise you. Lodeyic D Hepfx Adhort

Condition: used, Year of construction: 2007, color: white, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, steel, smooth-walled, BDF system, 7,450 mm long, corner height: 2,750 mm. Used steel, smooth-walled swap body, BDF system, 7,450 mm long, rear with aluminum roll-up door. Internal keyhole system in the side walls. Includes ladder. Superstructure newly painted in *STANDARD version, RAL 9010 white; support legs newly painted in white (rigid version), including underbody protection. *Standard version: In this version, the body is technically prepared for painting (partial scarring from sandblasting without filler repair). Standard is the solid basis for daily use – a body where the expectation corresponds to the requirements of a good new paint job – but without new parts installed. - Superstructure completely inspected and repaired - Clean pretreatment with abrasive blasting - In 2-component high-gloss paint, RAL standard pure white 9010 - Desired color available at a small additional cost upon request - UVV inspection All specified values are approximate dimensions in mm and kg. The offer is subject to change; prior sale reserved. Prices are net, ex works D-59558 Lippstadt-Rixbeck. More items can be found at . . Lredsz Dkxtepfx Adhet

Condition: used, maximum load weight: 13,190 kg, overall weight: 16,000 kg, first registration: 12/2020, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 46 m³, Year of construction: 2020, Krone WK 7.3 WK7.3ST Steel Swap Body Box VIN: W0957476 Body: * Steel box body with perforated walls * EN12642 Code XL certification * Dimensions (LxWxH): 7.30m x 2.48m x 2.52m * Volume: 46 m³ Weights: * Gross weight: 16,000 kg * Payload: 13,190 kg * Unladen weight: 2,810 kg Other information: Lodpfx Adoyg Tcdjhort * German vehicle * Excellent condition New general inspections, safety checks, or weight downgrades/upgrades can be arranged upon request. We are happy to assist with the procurement of export/temporary registration plates and with transporting your purchased vehicles within Germany. Please contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors. ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On our 11,000 sqm premises you will find a large selection of vehicles. Our company philosophy is characterized by fairness and professionalism. As customer satisfaction is very important to us, we offer our customers an all-inclusive service package and provide a dedicated contact person to support them throughout the purchasing or selling process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to help you organize special transport services. Short-term/export registration plates We are happy to assist you with obtaining export or short-term license plates. Completion of customs formalities We are happy to help you with customs clearance procedures.

Condition: used, axle configuration: 3 axles, first registration: 03/2012, color: other, Year of construction: 2012, Please contact us for more information. Lrjdpsz D Eqdofx Adhet

Condition: used, maximum load weight: 13,190 kg, overall weight: 16,000 kg, first registration: 12/2020, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 46 m³, Year of construction: 2020, Krone WK 7.3 WK7.3ST Steel Box Swap Body VIN: W0957478 Body: * Steel box body with perforated walls * EN12642 Code XL certificate * Dimensions (LxWxH): 7.30 m x 2.48 m x 2.52 m * Volume: 46 m³ Weights: * Gross weight: 16,000 kg * Payload: 13,190 kg * Unladen weight: 2,810 kg Other: * German vehicle * Excellent condition New general inspections / safety checks or weight downgrades/upgrades can be arranged on request. We are happy to assist you with obtaining export/transfer license plates; we can also organize the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide selection of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is very important to us, so we offer our customers an excellent all-round service package and provide a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Ledpjyhxzfjfx Adhjrt Organisation of special transports We are happy to help you organize special transports. Short-term/export license plates We are happy to assist you in obtaining export/short-term plates. Customs formalities We are happy to assist you in handling customs clearance.

Condition: used, machine/vehicle number: W0906F3397PA1xxxx, Year of construction: 2007, Please provide reference number upon request: 23600 Specifications: Refrigeration unit not working, but it may be repairable Body capacity: 33 pallets Internal height: 290 cm Total length: 1355 cm Width: 260 cm Axle spacing: 131/131 cm Air suspension 3 axles Tires are roadworthy but partially worn Trailer has not been used for several years Brakes require inspection/service Full side opening Ready for delivery Technical approved: no EU-approved until: 28.09.2021 Own weight: 12000 Total Weight: 42000 Payload: 30000 Width: 260 Length: 1355 Model: langtralle med full sideåpning = More information = Please contact ATS Norway for more information Lrodpfozqkd Ejx Adhot

Condition: used, maximum load weight: 36,600 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 06/2027, total width: 2,460 mm, Year of construction: 2021, Equipment: ABS, 3-axle KRONE Multi-Container chassis SDC27 eLTU70 First registration 07/2021, from first owner Mileage only 128,447 km CONDITION 1A, top Central tube frame made of high-quality fine-grained steel, pneumatically extendable rear Manually extendable container beam at the front Front extension with end-face locking and pivoting swivel pin locks Lrsdpoz Dza Ujfx Adhet Container locks for accommodating the following containers: 1x 40 FT container with tunnel 2x 20 FT containers 1x 20 FT container flush with the rear 1x 20 FT container centered 1x 30 FT container and 45 FT container with long tunnel and angled corners – can be operated without special permit!! B-dimension 12,000 mm BPW axles with large disc brakes, 430 mm Lifting and lowering device with automatic ride height adjustment Tires: 6 x 385/55 R 22.5 WABCO trailer EBS with vehicle stabilization function RENTING is the new BUYING; with us, it is also available immediately in a full-service rental agreement.

Condition: refurbished (used), functionality: fully functional, working width: 2,470 mm, ground clearance: 1,130 mm, color: white, overall weight: 16,000 kg, empty load weight: 3,020 kg, maximum load weight: 12,980 kg, loading space volume: 51 m³, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, total height: 2,900 mm, total length: 7,820 mm, total width: 2,550 mm, MOBILE VAN BODY BOX WITH DOORS CORRUGATED SIDE WALLS Lrsdex Rvqtspfx Adhjt REAR DOORS RAILWAY CODING NEWLY REPAINTED IN WHITE

Condition: used, maximum load weight: 12,840 kg, overall weight: 16,000 kg, first registration: 09/2007, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, loading space volume: 46 m³, Year of construction: 2007, * Roller shutter door * Wooden floor * Errors and prior sale excepted. 10 units in stock Lrsdpoz Dy H Hsfx Adhst

Condition: used, maximum load weight: 31,400 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 04/2012, loading space length: 13,300 mm, loading space width: 2,430 mm, loading space height: 2,500 mm, loading space volume: 83 m³, Equipment: ABS, Krone SD BDF Multi Chassis Refrigerated Container Carrier Bi-Temp. Internal Reference Number for inquiries: 0226114 * Overall condition: very good * ABS * Multi Chassis * 3 axles, air suspension * BPW axles * Drum brakes Refrigerated Container Internal Reference Number for inquiries: 0226115 * Refrigeration unit: Carrier – Vector * Bi-Temperature * Partition wall * Load securing rail left/right * Diesel operating hours: 12,520 h * Mains operation: 395 h Cargo area/load bed dimensions * Cargo area length: 13,300 mm * Cargo area width: 2,430 mm * Cargo area height: 2,500 mm Tyres: * 1st axle: 385 / 55 R22.5 30% tread, air suspension * 2nd axle: 385 / 55 R22.5 30% tread, air suspension * 3rd axle: 385 / 55 R22.5 30% tread, air suspension ----Price: €19,900 + 19% VAT Lodpfx Adoykdhljhjrt For further questions, you can reach us at the following numbers: We speak: German, English, Polish, French and ????? Subject to errors, mistakes, and prior sale.

Condition: used, Year of construction: 2007, color: brown, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, NEW PAINT! Through-loading system: Rear portal doors, front and rear used smooth steel wall swap body. Through-loading system: Portal doors at the front and rear with external rotary bolt locks. Refurbishment: Lodpfswtru Hjx Adhert • NEW PAINT – high-gloss in RAL 8004 copper brown • Undercarriage sandblasted, primed and coated with black underbody protection • Support legs new, telescopic, in RAL 9005 black • New rubber seals on the doors • Body fully overhauled with new safety inspection (UVV) • New galvanized access ladder Interior fitted with keyhole system and lashing rings. All stated values are approximate dimensions in mm and kg. Delivery possible. This offer is non-binding, subject to prior sale. Prices are net, ex-location D-59558 Lippstadt-Rixbeck. You can find more items at . .

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, color: white, overall weight: 16,000 kg, maximum load weight: 12,720 kg, empty load weight: 3,280 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,250 mm, loading space height: 2,750 mm, container length: 24 ft, -Year of construction: 2009-2011 -Manufacturer: Krone and Kerex -Fixed roof -Telescopic support legs -Aluminum roller shutter -Double floor -GVWR: 16,000 kg -Unladen weight: 3,280 kg -Payload: 12,720 kg -Interior dimensions: L=7,250 mm, W=2,480 mm, H=2,750 mm -Floor made of plywood -Interiors made of keyhole panels Several swap bodies always in stock, both Jumbo and Standard Delivery available for an additional charge Financing available upon request Images are sample images Opening hours: Mon.-Fri. 8 a.m. to 2 p.m. or by appointment Lrodpfjqk R I Nex Adhst Price is NET If purchasing multiple swap bodies, the price is negotiable. A VAT invoice will be issued upon sale. Location: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, functionality: fully functional, Year of construction: 2014, overall weight: 16,000 kg, maximum load weight: 13,300 kg, empty load weight: 2,700 kg, loading space width: 2,460 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, Krone steel interchangeable bridge Parking height: 1,320 mm Portal doors Lodjz Ahbljpfx Adhjrt Keyhole trim

Condition: used, Year of construction: 2012, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.9 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,525 mm, Interchangeable container, smooth steel, BDF system, 7,450 mm, PAINT – NEW! Interchangeable container with new aluminum portal doors, used steel, smooth walls. Interior: Keyhole panels throughout, and 5 pairs of lashing rings on each side in the side rail. Lrjdpfxoythc Se Adhjt - Complete inspection and repair of the superstructure - Thorough pretreatment with abrasive blasting - High-gloss 2-component paint in RAL standard pure white 9010 or RAL color of your choice! - New, telescoping support legs in black - Undercarriage blasted and coated with underbody protection - Includes galvanized access ladder - UVV inspection All stated values are approximate measurements in mm and kg. Delivery possible. This offer is non-binding, and we reserve the right to sell the item in the meantime. Prices are net ex works D-59558 Lippstadt-Rixbeck. You can find more items at . .