Used Krone Semitrailers With Swap Body for sale (1,473)

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, paint NEW in Premium Plus Used smooth steel swap body BDF system 7,450 mm long, rear with aluminum roller shutter.\nInternal keyhole system in the side walls.\n\nPREMIUM-PLUS refurbishment:\n- Premium 2 K paint finish - high-gloss - here in RAL 9010 white\n- Underbody blasted, primed and repainted in the body color\n- New roller shutter cables\n- New rubber seals on the roller shutter\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom along the entire length\n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cob E U I Esuzlxmodjgt

Condition: new, color: white, overall weight: 2,710 kg, empty load weight: 16,000 kg, loading space volume: 45.6 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,525 mm, Swap body, insulated ISO swap body with portal doors, FACTORY NEW Brand new insulated swap body, BDF system 7,450 mm long, high portal doors with double internal espagnolette locks at the rear.\n\nBody in RAL 9010 pure white. Telescopic support legs in RAL 9005 black, for storage height 920 - 1,320 mm.\n\nSide walls, front wall and roof in sandwich construction with steel top layer, painted on the outside, PVC-coated on the inside,\nPanel thickness front wall: 50 mm / roof: 30 mm / side walls: 30 mm\n\nInterior fittings as follows:\n - 27 mm thick, waterproof glued screen printing board floor, strength according to EN 283\nFor floor loads up to 5.460 kg forklift axle load.\n - Forklift collision protection on 3 sides, approx. 300 mm high.\n - 9 pairs of lashing rings in the outer frame\n - 2 rows of slotted-hole lashing rails horizontally embedded with 2 locking beams\n - NO double-decker system (contrary to the photos)\n - 3x Krone LED ceiling lights\n\nIncluding load securing certificate according to EN 12642 Code XL\n\nDelivery date on request. \nDelivery possible. Leasing possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Cjb Estt D Rwo U I Edogt

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, premium paint NEW in white Used steel - smooth wall swap body BDF system 7,450 mm long, rear with aluminum roller door.\nInside keyhole system in the side walls.\n\nPREMIUM refurbishment:\n- Premium 2K paint - high gloss in RAL 9010 white\n- Underbody blasted, primed and repainted in RAL 9010 white\n- Support legs repainted in RAL 9010 white\n- Structure completely overhauled with new UVV\n- Roof painted 40 cm all around - rest sprayed\n- Scrub base rolled in gray\n- New galvanized ladder\n- New galvanized gill plates installed after painting\n- Contour marking on the bottom side of the entire length in white\n- Contour marking on the rear in the corners in red\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Cgob Ejvm Dfxs U I Edot

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth wall swap body, BDF system, 7,450 mm long.\nBody newly painted in RAL 7040 window gray. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Cjb E U I Espg Dtcodsgt

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 1,890 kg, loading space width: 2,480 mm, Interchangeable platform, building material version BDF system, 7,450 mm long. Building material swap-body platform, BDF system, 7,450 mm long. \nWith drop sides, high bulkhead and tailgate.\n\nBody frame and bulkhead newly painted in RAL 9010 white, telescopic support legs new in black,\nAnodized drop sides 800 mm with recessed opening handles,\nAnodized tailgate with foot step, fold-out,\nBody blasted and provided with underbody protection\n\nAll values stated are approximate dimensions in mm and kg.\n\nThe offer is subject to change. Subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Cgobou H Nr Io E U I Edjt

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, rear roller shutter, branded smooth steel wall swap body with aluminum roller shutter, usable, \nBody de-inscribed, technically checked and provided with new UVV, \nAs long as stocks last, \nNew paint finish on request\n\nAll values given are approximate dimensions in mm and kg.\nDelivery possible. \n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Cobotw Edhs E U I Edogt

Condition: used, color: blue, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 44.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long, AIRPIPE possible - no water bag or ice on the roof! Used and refurbished swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\n\nOur services:\nNew paintwork in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nSandblasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nIncl. new side tarpaulins and new roof tarpaulin (also possible in code XL)\nIncl. brand new rigid or telescopic support legs (on request) in RAL 9005 deep black\nIncl. galvanized new 4-step extension ladder\nIncl. new foam rubber seal on the portal doors\nIncl. UVV functional test certificate\n\n\nWith AIRpipe system possible! against ice and water on the roof! (see pictures)\n\n- AIRpipe is suitable for any type of interchangeable body with tarpaulin ( sliding roof or fixed tarpaulin roof ) \n- No time-consuming, manual de-icing - no risk of your drivers falling\n- No traffic hazards due to falling ice sheets\n- Less stress on tarpaulins and superstructures due to gentle removal\n- Cost-effective and time-saving\n- Easy handling\n- Only the air line connection to the truck must be connected by the operator, everything else is prepared\nAdditional price AIRpipe: EUR 1.450,- net\n\nPossible interior equipment structure:\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor (depending on the version).\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä. . Csb Eou T Rvfo U I Edegt

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,600 kg, loading space volume: 44.4 m³, loading space width: 2,450 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Swap-body platform, drop-sides with tarpaulin Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long. baked Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,750 mm. Parking height: 1,320 mm\nTotal weight: 16,000 kg. Unladen weight: 2,800 kg.\n\nSwap-body platform as storage container. \nPartial rust on parts of the swap-body platform. Usual signs of use, deformations, stops and damage. Body in RAL 3003 ruby red with neutralized lettering.\n\nMultiple available. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cob E Ujtv Ng Re I Edjgt

Condition: used, Year of construction: 2011, color: green, overall weight: 16,000 kg, empty load weight: 3,140 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, corrugated steel BDF system 7.45, NEW PAINT in RAL 6024, BRAND NEW portal doors * Structure completely blasted, primed and NEW PAINTED in RAL 6024 traffic green or RAL color as desired.\n* Substructure blasted, primed and painted in body color.\n \n* Installation of brand new aluminum double-leaf doors with galvanized espagnolette locks and new rubber seals.\n\n* Brand new telescopic support legs in black,\n* Forklift pockets, corner locks in the roof - stackable,\n* Inside keyhole plates in the corrugations\n* Wooden floor\n* new UVV\n\nDents behind the keyhole plates unavoidable - some present as used.\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Csb Esvzb Rue U I Edsgt

Condition: used, Year of construction: 2008, color: silver, overall weight: 3,100 kg, empty load weight: 16,000 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel Combi-Box BDF system 7.450 mm long, LACK NEW in white aluminum Steel swap body, Combi-Box, rear portal doors with internal espagnolette locks,\nWell preserved,\nDriving direction left sliding tarpaulin with steel insert slats with 3 rows of combination anchor rails, 2 slides,\nFRight smooth steel cassette with keyhole plate with 3 rows of combination anchor rails and lashing points in the scuff plate,\n\n- steel roof and wooden floor, \n\n- body and underbody NEW PAINTED in RAL 9006 white aluminum, support legs NEW telescopic in black, \n\n- body completely checked and repaired\n\n\n-UVV test\n\nAll values given are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found under . Steel/aluminum insertion slats. Cgjb Ejvf Ngro U I Edet

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,430 kg, loading space volume: 48.7 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,700 mm, Swap-body platform, sliding tarpaulin BDF system 7,450 mm long, FACTORY NEW Brand new swap-body platform with Edscha sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\nSPECIAL HEIGHT: 2,900 mm!\n\nBody in RAL 9010 pure white, sliding tarpaulins in RAL 9010 pure white.\nSupport legs in RAL 9005 jet black. \nPitching height: 980 to 1,320 mm.\nLoading height rear portal: 2,525 mm\n\nEquipment:\n27 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMultilock outer frame\n4 sets of LM insertable slats\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12641-2 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Cob E U I Eotib Niedjgt

Condition: used, color: blue, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 44.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,480 mm, Swap-body platform, sliding tarpaulin BDF system, 7,450 mm long Used and refurbished swap-body platform with sliding tarpaulin, BDF system, 7,450 mm long.\nBody repainted in RAL 5002 ultramarine blue (THW blue). New sliding tarpaulins in RAL 5002 ultramarine blue (optionally also available in code XL). New roof tarpaulins in white.\nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm. (telescopic support legs on request)\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,480 mm. Side loading height: 2,450 mm. Rear through-loading height: 2,440 mm.\nTotal weight: 16,000 kg. Empty weight: 2,700 kg.\n\nInterior equipment:\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor (depending on the version).\n\nOur services:\n\nNew paintwork in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nIncl. new side tarpaulins and new roof tarpaulin. new side tarpaulins and new roof tarpaulin (also possible in code XL)\nIncl. brand new rigid or telescopic support legs in RAL 9005 deep black\nIncl. galvanized new 4-step extension ladder\nIncl. new foam rubber seal on the portal doors\nIncl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Cgsb E Ujpgt N Hs I Edet

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 45.7 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, Swap body, plywood Plywood swap body, BDF system, 7,450 mm long Brand new plywood swap body, BDF system 7,450 mm long. \nRear portal doors with internal espagnolette locks.\n\nSupport legs in RAL 90052 black telescopic\n*Roof in insulated version, sandwich panels, thickness: 30 mm \nInside: \nForklift approach protection on 3 sides, approx. 360 mm high\n2 rows of combi lashing rails mounted horizontally on the side walls.\nInstallation: Height center 1st lashing row above floor 800 mm and \nHeight center 2nd lashing row above floor 1,600 mm.\nIncl. load securing certificate according to EN 12642 Code XL.\n\n27 mm thick, waterproof screen printing plate floor, strength according to EN 283, \nfor floor loads up to max. 5,460 kg forklift axle load.\nSliding ladder at the rear.\n\nAll values given are approximate dimensions in mm and kg.\n\nDelivery date on request. Leasing possible. Delivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . . Cobstu Nqho E U I Edegt

Condition: new, color: white, empty load weight: 16,000 kg, loading space volume: 56.3 m³, loading space width: 2,470 mm, loading space length: 7,670 mm, loading space height: 2,970 mm, Swap body, smooth steel BDF system, 7,820 mm long, FACTORY NEW! Brand-new smooth-walled steel swap body, BDF system 7,820 mm long, corner height: 3,125 mm.\n\nRear portal doors with double interior espagnolette locks.\n\nBody in RAL 9010 pure white. Telescopic ZINC-plated support legs for storage height 920 - 1,120 mm.\n\nInterior fittings as follows:\nRoof made of trapezoidal profiled sheet steel.\n21 mm thick, waterproof glued screen printing plate floor, strength according to EN 283\nfor floor loads up to 5,460 kg forklift axle load.\n\nForklift collision protection on 3 sides, approx. 360 mm high.\nSide walls above scuff rails with recesses for bulk material drainage\nSide walls inside with wooden paneling and \nSide walls inside with keyhole plates over the entire surface \n\nIncluding load securing certificate according to EN 12642 Code XL\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Cgsb E Uetybtwo I Edst

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 45.3 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, Swap body, steel smooth BDF system 7.45m, paint NEW standard version with 2K paint, gray or desired color used steel smooth-wall swap body, BDF system 7.45m, rear with aluminum roller shutter, refurbished \nBody NEW PAINTED in standard version - here in grey, - standard RAL colors available on request,\nUnderbody blasted and provided with underbody protection, \nNew telescopic or fixed support legs, \nBody with new sealing seam - also painted in body color,\nNew rubber seals on roller shutter\nNew current UVV\nSlight scarring from blasting may still be visible in standard version\nFor premium paint finishes, please contact us!\n\nInternal keyhole system in the side walls or lashing rails.\n\nAdditional price for wooden or plastic base plates with bracket\n\nWhile stocks last or delivery time on request if not directly available. \n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n\n\n . Ceb E U Ijqdai He Edsgt

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 48.8 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,695 mm, Swap-body platform, drop-sides with tarpaulin Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long. baked Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,950 mm. Parking height: 1,120 mm\nTotal weight: 16,000 kg. Unladen weight: 2,950 kg.\n\nSwap-body platform as storage container. \nPartial rust on parts of the swap-body platform. Usual signs of use, deformations, stops and damage. Body in RAL 3003 ruby red with neutralized lettering.\n\nImmediately available. Multiple available. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Ceb E U I Ejpgty Ejdjgt

Condition: used, color: light blue, overall weight: 16,000 kg, empty load weight: 3,250 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, PAINT NEW Used and refurbished smooth steel swap body, BDF system, 7,450 mm long.\nBody NEW PAINTED here in RAL 5015 sky blue. \nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,480 mm.\nTotal weight: 16,000 kg. Empty weight: 3,250 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step pull-out ladder\nincl. new foam rubber seals on the portal doors\nincl. 7 steel plates on the sides and front wall as well as new sealing seam all around, \nto prevent corrosion \nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Cobjpguzpo E U I Edegt

Condition: used, color: green, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, LACK NEW! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nIncluding SIDE DOOR (1.15 x 2.0 m)\n\nBody repainted here in RAL 6011 Reseda green. Other RAL colors available on request.\n\nAluminum roller shutter at the rear.\nIncl. brand new support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nInterior fittings:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel ropes on the roller shutter door\nincl. new side and bottom seals on the roller shutter door\n\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Cgobst E T Nmj E U I Edjt

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-wall steel swap body, BDF system, 7,450 mm long.\nConstruction here newly painted in RAL 9010 pure white or RAL color upon customer request\nAluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInner height: 2,550 mm. Loading height at the rear: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior fittings:\nKeyhole sheet metal embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scrubbing base\n(varies depending on the model, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint in one of 212 RAL colors of your choice\n(Please use our overview of all available RAL colors on our homepage)\nRoof approx. 40 cm painted all around (ATTENTION: No complete roof painting! We can gladly offer you roof painting for an additional charge.)\nBlasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new fall protection devices\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel cables on the roller door\nincl. new side and floor seals on the roller door\nincl. 7 steel sheets on the sides and on the front wall as well as new sealing seam all around,\nto prevent corrosion\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\n\nDelivery date on request.\n\nThe offer is subject to change and subject to prior sale.\nPrices net from location D-59558 Lippstadt-Rixbeck.\nYou can find more objects at pstä.\n . Cob Ejt Sxkvj U I Edjgt

Condition: used, Year of construction: 2009, color: blue, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 46.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, LACK NEW, Premium plus! used steel swap body, BDF system 7,450 mm long. \nSmooth side walls, portal doors at the rear with external espagnolette locks.\nInside keyhole system\n\nFinished in PREMIUM PLUS version: \n\n- Premium 2 K paint finish - high-gloss, here in RAL 5005 signal blue or RAL color as requested\n- Underbody blasted, primed and repainted in body color\n- New roller shutter cables\n- New rubber seals\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom, full length \n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request.\nDelivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Cgjb Eeuwtbno U I Edst

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, empty load weight: 3,100 kg, loading space volume: 18.8 m³, loading space width: 2,480 mm, loading space length: 2,750 mm, loading space height: 2,750 mm, Swap body, smooth steel BDF system 7,450 mm, smooth-walled steel body, \n\nwith new UVV\n\nInternal keyhole plates and scuff plate all round.\n\n\nAll values stated are approximate dimensions in mm and kg.\n\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n . Cgjb E Ujuuk Ixj I Edst

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 3020 traffic red. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Csb E U Ijpgr S Us Edjgt

Condition: used, color: white, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel beaded Steel swap body 7.45m BDF with portal doors - new paint finish, blasted and NEWLY PAINTED in high-gloss RAL 9010 white\nFactory-new support legs, fixed or telescopic in RAL 9005 black\nRear double-wing door with external espagnolette locks\nInside keyhole plates in the corrugations\nNew UVV with certificate\nDelivery time on request - while stocks last\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found under . Forklift pockets ( not available for all - according to RS ). Cob Espgzh Ho U I Edjgt

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 9010 pure white. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Cgeb E Uopg Ecze I Edjt

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 48.2 m³, loading space width: 2,470 mm, loading space length: 7,290 mm, loading space height: 2,675 mm, Swap body, smooth steel Smooth steel wall Swap body, BDF system, 7,450 mm long Brand new steel swap body, BDF system 7,450 mm long, rear portal doors with double internal espagnolette locks.\n\nExternal dimensions: L= 7,450 mm, W= 2,550 mm H=2,900 mm. Storage height: 1,120 mm.\nTotal weight: 16,000 kg.\n\nBody in color RAL 9010 pure white. Telescopic support legs in RAL 9005 jet black for storage height 980 - 1,120 mm.\n\nInterior equipment as follows:\nSheet steel roof with anti-condensation coating, without light window.\n27 mm thick, waterproof glued screen printing plate floor, strength according to EN 283\nFor floor loads up to 5,460 kg forklift axle load.\nFloor plates with smooth side facing upwards. Ideal for furniture transport.\n(Sliding friction value of at least 0.3 is not achieved, \ntherefore the use of e.g. anti-slip mats is necessary for Code XL)\nForklift collision protection on 3 sides, approx. 360 mm high.\nInside with wooden paneling and \nwith 4 rows of horizontal rod lashing rails.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Cgob E Ujtrgyws I Edjt