Used Meiller Tr Semitrailers for sale (158)

Condition: new, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Purchase, rent, or lease with an option to buy – available by arrangement! Meiller 25m³ insulated tipper body with electric sliding tarp - NEW! --- * Manufacturer: Meiller * Type: MHPS44.3-N - Insulated tipper body * First registration: - (New vehicle) * Colour: Tarp RAL 9006 White Aluminium, Chassis RAL 7021 Black Grey * Capacity: approx. 25 m³ (approx. 7.60 m long x 2.30 m wide x 1.50 m high) * Axles: 3x BPW axles / 1st axle liftable / starting aid / disc brakes * Tyres: 385/65 R 22.5 tread S NEW * Suspension: Air suspension with raise and lower function Hfedpewd Dhmefx Alysk * ABS / EBS * Swing tailgate with side toggle latches and rear wall seal * Internal access at the front left * Front hopper corners chamfered for improved material flow * 5/6 mm floor * 4 mm side walls * 4 mm front wall * 4 mm rear wall * Chassis frame in welded construction made of high-strength fine-grain steel * Fifth wheel height unladen: 1,247 mm * Fifth wheel height laden: 1,217 mm * Electric Meiller sliding tarpaulin with remote control * Individual mudguards * Aluminium air tanks * ECAS with automatic lowering during tipping operation * TPMS tyre pressure monitoring system * Foldable underrun protection * Additional LED reversing spotlight New vehicle! Purchase, rent, or lease with an option to buy – available by arrangement! Notice regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional errors may appear in the text or details specified. We accept no liability for mistakes, alterations, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, maximum load weight: 14,580 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, NEW VEHICLE!! TO RENT, BUY OR RENT AND BUY BY ARRANGEMENT!! Meiller roll-off trailer with steel frame / container lengths up to 7.00m / NEW VEHICLE! ----* Manufacturer: Meiller * Type: BTA MG18-ZL 5.4 - roll-off trailer * First registered: - (NEW VEHICLE) * Total weight: 18,000 kg * Empty weight according to manufacturer: approx. 3,420 kg * Payload: 14,580 kg * Axles: 2x BPW axles/disc brakes * Suspension: ZL air suspension with lowering device * Tires: 265/70 R 19.5 profile S / twin tires * ABS/EBS * Container lengths from 5.00m to 7.00m * Drawbar 40 eyelet * Container lengths 5.00 to 7.00m * Drawbar length 2.60m * Drawbar eye 50mm * Bogie with low-maintenance ball bearing steering ring Hjdjq Hnkxspfx Alyefk * Aluminum air tank * 4 pneumatic, Four locks integrated into the cross members * automatic locking of the container after coupling the trailer to the towing vehicle * Smartboard * 1x LED work light * 1x tool box on the right * 1x open tool box on the left * Single fender with splash guard mats * LED license plate lighting * LED tail lights and additional LED reversing lights * continuous splash flap on the underrun protection NEW VEHICLE!! AVAILABLE FOR RENT, PURCHASE OR RENT AND PURCHASE BY ARRANGEMENT!!

Condition: new, maximum load weight: 14,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, Year of construction: 2026, * Combination container trailer for transporting one roll-off container or two skip loaders. ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Disc brake 19.5" ----Axles: * 2 x 9-ton BPW axles * Reinforced single-leaf spring suspension ----Suspension: * Air suspension with lowering device for easier container transfer, automatic container locking after coupling the trailer to the towing vehicle (automatic locking can be permanently deactivated using a rotary switch for transporting skip loaders) ----Drawbar: * Pneumatically lowerable, maintenance-free drawbar – 2,600 mm long, 40 mm drawbar eye – with integrated hose holder for loading a roll-off container or up to 2 skip loaders on either side ----Electrical system / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power plug * EcoLED II rear lights * 2 LED work lights at the rear * Preparation for MOTEC rear-view camera ----General components: * 60-liter aluminum air tank * Side underrun protection that can be folded down on both sides * Closed plastic wheel arches with splash protection mats * Bolted underbody protection with splash flaps * Plastic toolbox at the rear right * Open mesh box at the rear left * Folding A-frame sign at the rear * ECE marking at the rear ----Transport for roll-off containers: * For transporting roll-off containers according to DIN 30722 - 1/2, 5,000 - 7,000 mm in clear length – loading from the rear * Loading from the front, transportable container lengths of 5,750 - 7,000 mm * Transport of compressed waste containers according to DIN 14505 with 16 m³ or 20 m³ * 4-point pneumatic locking device integrated into the cross member * Roll-off track length approx. 7,190 mm * Steel frame with two longitudinal members and lateral roller guide as well as wear-resistant running surface for the container rollers * Guide funnel with lowered running surface at the rear for easier transfer of the roll-off container * Roller recesses at the front with 2 positions for mechanically adjustable locking stops ----Transport of skip loaders: * Suitable for transporting 2 skip loaders with 5 to 10 m³ according to DIN 30720-1 * 8 folding, variably adjustable lateral container supports with container resting surface for skip loaders (4 units per side, 2 at the front and 2 at the rear) * 8 variably pluggable container stops for securing the skip loaders * 4 lashing eyes on each side, each with a 6.3-ton lashing force ----Painting: Hsdpfxjzfdzgj Alyofk * Chassis with KTL coating and painting in RAL 7021 black-gray * Locking hooks and container stops galvanized ----General information: * Errors and prior sale reserved * New vehicle with manufacturer's warranty * Sample images ----Delivery time: Available from approx. week 32/2026

Condition: new, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Equipment: ABS, Brakes: * Wabco TEBS-E / ABS (electric braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axle: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Electrical System / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * 5-chamber tail lights with protective cover ----Drawbar / Fifth Wheel: * Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit) ----General Components: * Aluminum air tank, welded box-type drawbar * Front support jack * Rear underrun protection * Enclosed plastic mudguards ----Tipping Body: * Steel 3-sided tipping body with M-Jet side boards * Continuous side walls - without center supports * Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall * Hydraulically folding left side wall (side board automation) * Rear tailgate pivoting with automatic cam lock and 150 mm rear gate * Manual metering device via chain ----Thickness of floor, side walls, front and rear walls: * Front wall made of 3 mm STEELECT 240 steel * Side walls with stable, continuous, inward-sloping top rail * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel) Hodpfx Aozd I Dcjlyefk * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roll-over Cover: Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall ---- Painting: * Chassis painted in RAL 7021 black-gray * Painting of side boards in RAL 9006 white-aluminum ----General Information: * Vehicle superstructure complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately, from approximately week 37/2026

Condition: used, New: No Hjdpsxt Uhyefx Alyjfk Selling price: € 4.500, US$ 5.223 VAT/margin: VAT qualifying Purchase on credit is possible: Yes

Condition: used, maximum load weight: 29,640 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2022, loading space length: 7,600 mm, loading space width: 2,420 mm, loading space height: 1,500 mm, loading space volume: 27 m³, Equipment: ABS, ALSO AVAILABLE FOR RENT!!!! Hodjxarwxspfx Alyefk Approx. 27 m³ Meiller aluminium tipper semi-trailer with paver brake / aluminium rims / lift axle ---- * Manufacturer: Meiller * Model: KISA 3 * First registration: 02/2022 * Gross vehicle weight: 35,000 kg * Unladen weight according to registration: 5,360 kg * Payload: 29,640 kg * Axles: 3 x SAF with first axle as lift axle / disc brakes * Suspension: Air suspension * Tyres: 385/65 R 22.5 approx. 50% tread remaining on aluminium rims * Colour: chassis black, tipper body blue, sliding tarp grey * EBS Wabco * Volume: approx. 27 m³ (7.60 m length x 2.42 m width x 1.50 m height) * Pendulum tailgate, resting, without chute * Coupling height unladen 1.22 m * Automatic lowering during tipping * Control platform at the front with access ladder on the left * Sliding tarp with central locking * Folding underrun protection * Paver brake * LED reversing lights * Individual wheel arch covers * Document box front right * Tow hook * Load pressure gauge * Approx. 4 m aluminium ladder on the right side of the chassis German trailer!! German documentation!! Note on possible errors in the advertisement: Despite careful preparation of this advertisement, mistakes may occur in the text or specifications from time to time. We do not accept liability for errors, changes, or prior sale. All information is without guarantee. Please contact us to verify details or if you have any further questions.

Condition: used, maximum load weight: 25,280 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 04/2014, next inspection (TÜV): 07/2026, loading space length: 6,600 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, loading space volume: 20 m³, Year of construction: 2014, Equipment: ABS, Stock no. 5707 Approx. 20m³ Meiller compact tipping semi-trailer with hydraulic tailgate / paver brake ---- * Manufacturer: Meiller * Model: MHPS 42/2 * First registration: 04/2014 * Gross weight: 31,000 kg * Unladen weight (according to registration): 5,720 kg * Payload: 25,280 kg * Axles: 2 x BPW, with 1st axle as lift axle / drum brakes * Suspension: Air suspension * Tyres: 425/65 R 22.5 approx. 50% remaining, on steel rims Hfjdpfx Alex S T Nceysk * Colour: Chassis black, tipping body grey, tarpaulin grey * EBS Wabco * TÜV (German roadworthiness test): 07/2026 * Volume: approx. 20m³ (6.60m long x 2.40m wide x 1.40m high) * Hydraulically operated tailgate with additional clamping locks * Roll tarp with tension straps * Operator’s platform at front with access ladder on the left * Full-load supports (aluminium drop supports) * Coupling height loaded: 1.27m * Paver brake * Single mudguards * LED reversing lights * Folding underrun protection * Approx. 4.00m aluminium boarding ladder on the right German semi-trailer !! German documents !! Notice regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional mistakes in the text or details may occur. We accept no liability for errors, alterations, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: used, maximum load weight: 13,470 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 4,800 mm, loading space width: 2,450 mm, total width: 2,500 mm, Gross weight: 18,000 kg Unladen weight: 4,530 kg Payload: 13,470 kg Overall length: 7,200 mm Loading length: approx. 4,800 mm Width: 2,500 mm Additional information - BPW axles - Tyres 385/65R22.5 Hfsdeyw Eqcspfx Alyek - Central locking - LED reversing lights - Support leg - Air suspension

Condition: new, maximum load weight: 29,680 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,682 mm, total width: 2,520 mm, total height: 3,050 mm, Year of construction: 2021, Equipment: ABS, * 1st axle liftable * Platform * Steel chassis * Steel tipping body * Wabco Trailer EBS, ABS, ALB * SAF axles with disc brakes ----* Tyre size: 385/65R22.5 * Technical gross weight: 39,000 kg * Unladen weight: 6,320 kg ----Vehicle number 6823----Subject to errors & prior sale WhatsApp support available! Hfedpfolz Ig Iox Alyek For questions about the vehicle or further information, feel free to write to us conveniently via WhatsApp Whatsapp Whatsapp

Condition: new, Year of construction: 2025, Equipment: ABS, F.X. Meiller 25 m³ Hjdpfx Asw Rittolyjfk NEW VEHICLE 5 units in stock - Kisa 3 - Steel tipping body - Lift axle - LED rear lights - LED side marker lights - LED license plate lighting - Disc brakes - Front wall: 4 mm BS 70 - Rear wall: 4 mm HNW Hardox - Side walls: 4 mm HBW Hardox 450 - Floor: 5/6 mm HBW 450 Hardox, tailored - Side wall height: 1,500 mm Subject to errors and prior sale. Internal vehicle number: 11235+11236+11237+11238+11239 WhatsApp support available! For questions about the vehicle or for more information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, maximum load weight: 13,160 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2019, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Equipment: ABS, ? Left-hand side drop-down and pivoting side panel ? Drum brake ? ABS Hsdpfszcixgsx Alyefk ? Air suspension ? Support leg ? Roll-up tarpaulin ? SAF axles All information is provided without guarantee / subject to prior sale.

Condition: used, maximum load weight: 33,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 12/2013, next inspection (TÜV): 10/2013, Equipment: ABS, * Meiller 3-axle tipper body Hjdpsy Dadwofx Alysfk * KISA 3 * Air suspension * Lift axle * BPW axles * Wabco SmartBoard * Rolling tarpaulin

Condition: used, maximum load weight: 28,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2018, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, loading space volume: 24 m³, Equipment: ABS, ? Steel half-shell tipper body ? Folding underride guard ? Rear-view camera ? Smart Board ? Drum brakes ? Platform ? ABS ? Air lift axle ? EBS ? Roll tarp ? BPW axles All information subject to change / prior sale reserved. Hjdpfx Aljyu Eqveyefk

Condition: used, mileage: 1,000 km, power: 105 kW (142.76 HP), first registration: 05/2009, empty load weight: 3,850 kg, maximum load weight: 11,150 kg, overall weight: 15,000 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 1, Year of construction: 2009, Equipment: crane, * Meiller 3 side tipper as swap body * MKG HLK 66 crane * Can be mounted on almost all trucks thanks to Twist Lock quick-release fasteners * 3.30 m x 2.50 m Twistlock attachment * Quick conversion * Can be used for all standard truck types with swap body * Crane 7.50 m = 730 kg * 5.70m = 970 Kg. * 3.90m = 1,490 kg. * 5th + 6th control circuit * High level control * Floor control * 2 hydraulic outriggers * Tipper length: 3,900 x 2,400mm * 50 cm loading flap + 50 cm elevation * High front wall * Steel loading floor * DIN lashing eyes * Parking device Hodpfxsvhp E To Alyefk If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, maximum load weight: 14,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2025, Brake system: * Wabco EBS-E / ABS (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes Hfodpfx Alsvxnd Nsyok ----Axle: * 2 x 9 t BPW Eco Plus axles ----Suspension: * Air suspension with lowering function ----Drawbar: Drawbar, 2,600 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle ----Electrics / Lighting: * 15-pin power connector * Pre-wired for Motec rear-view camera * LED tail lights with protective cover * 2 rear LED work lights * Electrical preparation for MOTEC rear-view camera * Wabco Smartboard ----General attachments: * 60-liter aluminum air tank * Reinforced single-leaf spring * Foldable, closed-type side underrun protection (suitable as advertising panel) * Enclosed plastic mudguards * Bolt-on underrun protection * Foldable "A" sign at rear * Plastic toolbox, rear right * Stainless steel mesh box, front left * Side underrun protection ----Roller track: * Roller track length approx. 7,115 mm * Recessed running surface with manually insertable roller stops – 2 positions – at front, with 2 pneumatic locks integrated into cross members at each position ----Load securing: * Automatic container locking after uncoupling the brake system from the towing vehicle * Side lashing rings for additional cargo securing ----Loading height in driving position: * Approx. 1,065 mm ----Loading dimensions: * Suitable for container lengths 5,000 – 7,000 mm according to DIN 30722-1/2, DIN 14505 ----Painting: * Chassis with KTL primer coating ----Tyres: * Tyres 265/70 R 19.5 * Tyre pressure monitoring system (TPMS) ----General info: * Subject to error and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 28,420 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * 22.5” disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9-ton BPW Eco axles * 1st axle liftable with traction aid * Meiller-specific torsion cross member ----Suspension: * Air suspension with raise/lower system and automatic lowering during tipping (can be deactivated for increased stability when using pavers) ----Electrics / Lighting: * Smart Board: raising/lowering and lift axle lowering, axle load display, odometer, odometer error code reading Hjder Exzuspfx Alyjfk * Tire Pressure Monitoring System (TPMS) * 1 x 15-pin trailer socket * LED tail lights with protective cover ----General attachments: * Aluminum air tank * BPW telescopic landing gear with plate foot * 4 m aluminum access ladder stored on the right side of the frame * Closed plastic single mudguards * Folding underride guard * Folding A-sign * Tow eye at the rear * Bolted access ladder with folding lower part at the front left * Document pouch on the front wall ----Chassis frame: * Chassis made of high-strength fine-grained steel ----Tipping body: * Semi-circular steel rear tipper body made from Hardox HBW-450 steel * Side walls with strong, continuous, inwardly inclined top rail * Front and rear walls set at an angle * Overlapping rear tailgate with double hinges and automatic 2-hook locking system ----Thickness of the floor, sides, front and rear walls: * Tailored floor 5 / 6 mm * 4 mm side walls made of HBW 450 steel * 4 mm rear wall made of HBW 450 steel * Front wall outside 3 mm BS50 steel and inside 3 mm BS70 steel ----Hydraulic cylinder: * Front medium-pressure hydraulic cylinder ----Tarp: * Electric sliding tarp -RAL 9006 white aluminum- with remote control or right side manual switch operation * 600 mm tarp carrier at the front wall ----Saddle height: * Unladen: 1,247 mm * Laden: 1,217 mm ----Loading volume: * approx. 25 m³ ----Painting: * Chassis painted in RAL 7350 nova grey ----General information: * Thermal insulation according to DIN 70001 and prepared for measurement technology - bracket without sensors * New vehicle with manufacturer's warranty * --Permissible gross weight 39,000 kg technically possible-- * Errors and prior sale excepted ----Delivery time: * Available immediately from Egestorf

Condition: used, maximum load weight: 14,560 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2024, loading space length: 7,115 mm, Year of construction: 2024, Brakes: * Wabco EBS-E / ABS (electronic braking system) * Emergency release device for spring-actuated cylinders * 19.5" disc brakes Axles: * 2 x 9 t BPW Eco Plus axles Suspension: * Air suspension with lowering function Drawbar: * Drawbar 2,600 mm long with 40 mm tow eye, height adjustment via draw spring and turnbuckle Electrics / Lighting: * Wabco Smartboard * 15-pin power connector * LED tail lights with protective housing * 2 LED work lights at the rear * 1 LED work light on each side General Attachments: * 60 l aluminum air tank * Reinforced single-leaf guide spring * Folding side underrun protection * Enclosed plastic fenders * Bolted underride guard * Folding A-plate at the rear * Plastic toolbox, rear right * Steel mesh box, front left Roller Track Surface: * Roller track length approx. 7,115 mm * Recessed running surface with manually insertable stops (2 positions) at the front * 2 pneumatic locks integrated in each cross member * Automatic container locking after disconnecting the brake system from the towing vehicle * Side lashing rings for additional cargo securing Loading Height: * Approx. 1,065 mm in driving position Painting: Hodpfsyqd Dajx Alyofk * Chassis with KTL primer and finish painted in RAL 7021 black-grey Delivery Time: * Available immediately

Condition: new, maximum load weight: 28,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, Year of construction: 2026, Brakes: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes 22.5" * Auxiliary brake with shortened rear fenders and manual auxiliary brake switch ----Axles: * 3 x 9-ton BPW or SAF axles (depending on availability) * Lift axle with starting aid ----Suspension: * Air suspension with automatic lowering during tipping (to increase stability, can be deactivated for asphalt pavers) ----Electrical System / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pole trailer socket * Eco-LED II lighting with protective roof * 1 x additional LED work light * Flashing side marker lights ----General Components: * Aluminum air tank * Telescopic steel support legs with plate base (can only be coupled in the empty state) * 4 m aluminum ladder, stored on the right side above the fender * Closed plastic individual fenders * Folding underrun protection * Towing eye at the rear * Folding access ladder on the left side at the front * Document box on the front wall ----Frame: Hodoxxf Tqspfx Alyjfk * High chassis frame made of high-strength fine-grained steel with Meiller-specific torsion crossmember ----Tipping Body: * Half-shell steel tipper body made of STEELECT 450 steel -HBW 450- * Front wall with 600 mm front roof as a tarpaulin support * Side walls with stable, continuous, inwardly inclined top rail ----Thickness of floor, side walls, front and rear wall: * Front, side and rear wall 4 mm * Front and rear wall angled * Tailored floor 5 / 6 mm ----Hydraulic Cylinders: * Front hydraulic cylinders with medium working pressure ----Hydraulic Rear Wall: * Resting and pivoting hydraulic rear wall. Control of the hydraulic rear wall via a mechanical ball valve ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminum- with manual switch on the chassis and remote control ----Load Volume: * Approx. 25 m³ ----Saddle Height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Painting: * Painting of the chassis in RAL 7021 black gray * Tipping body in RAL 9006 white aluminum ----General Information: * --Maximum permissible total weight of 39,000 kg technically possible-- * Errors and prior sale reserved * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week 37/2026

Condition: new, maximum load weight: 28,760 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2025, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5” disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 3 x 9 t BPW axles * 1st axle liftable with starting aid ----Suspension: * Air suspension with automatic lowering during tipping process (to enhance stability, deactivatable for overhead pavers) ----Electrics / Lighting: * 1 x 15-pin trailer socket * LED tail lights * 1 x additional LED worklight * Flashing side marker lights * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Aluminum air tanks * Jost telescopic steel landing legs with footplate (disconnectable only when unladen) * 4 m aluminum access ladder stored at the right side above the mudguards * Enclosed plastic single mudguards Hfodpfxjuqtcdj Alyek * 4 m aluminum access ladder stored above the mudguards * Folding underrun protection * Rear towing eye * Access steps and aluminum standing platform on the exterior front wall ----Chassis: * Chassis made of high-tensile fine-grained steel with Meiller-specific torsion cross members ----Tipping Body: * Half-shell steel rear tipper body (front hydraulic ram with medium operating pressure) * Side walls with robust continuous upper belt, inwardly inclined * Overlapping tailgate with rubber seal and 2 additional toggle locks as well as automatic 2-hook locking system ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front wall 4 mm made of BS 70 steel * Side walls and tailgate made of 4 mm HBW 450 steel * Tailored floor made of 5 / 6 mm HBW 450 steel ----Tarp: * Manual roll tarp – RAL 9006 white aluminium ----Loading volume: * approx. 25 m³ ----Fifth-wheel height: * unladen approx. 1,247 mm * laden approx. 1,217 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipper body in RAL 9006 white aluminium ----General Information: * --Permissible gross vehicle weight of 39,000 kg technically possible-- * Errors and prior sale excepted * New vehicle with manufacturer warranty ----Delivery time: * available from week 32/2026

Condition: new, maximum load weight: 28,640 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, Brakes: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Disc brakes 22.5" * Parking brake with shortened rear fenders and manual parking brake switch ----Axles: * 3 x 9-ton BPW or SAF axles (depending on availability) * Lift axle with start-up assistance ----Suspension: * Air suspension with automatic lowering during the tipping process (to increase stability, can be deactivated for asphalt pavers) ----Electrical System / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pole trailer socket * 5-chamber rear lights with protective cover * 1 x additional LED work light * Flashing side marker lights ----General Components: * Aluminum air tank * Jost telescopic steel landing gear with plate foot (can only be coupled in the unloaded state) * 4 m aluminum extension ladder stored on the right side over the fender * Closed plastic individual fenders * Folding underrun protection * Towing eye at the rear * Folding access ladder on the left side at the front * Document box on the front panel ----Frame: * Chassis made of high-strength fine-grained steel with Meiller-specific torsion crossmember ----Tipping Body: * Half-shell steel rear dump body * Front panel with 600 mm front canopy as a tarpaulin support * Side walls with stable, continuous, inward-sloping top rail Hodpfx Aljxxf Tweyjfk * Front and rear walls angled ----Thickness of Floor, Side Walls, Front and Rear Walls: * Front wall 4 mm made of BS 70 steel * Tailgate 4 mm made of 4 mm HBW 400 steel * Side walls made of 4 mm HBW 450 steel * Tailored floor made of 5 / 6 mm Hardox 450 steel ----Hydraulic Cylinders: * Front hydraulic cylinders with medium working pressure ----Hydraulic Rear Wall: * Fixed and pivoting hydraulic rear wall. Control of the hydraulic rear wall via a mechanical ball valve block ----Tarpaulin: * Electric sliding tarpaulin - RAL 9006 white aluminum - with switch on the chassis and remote control ----Load Volume: * Approx. 25 m³ ----Saddle Height: * Unloaded approx. 1,247 mm * Loaded approx. 1,217 mm ----Painting: * Painting of the chassis in RAL 7021 black gray * Tipping body in RAL 9006 white aluminum ----General Information: * --Technically possible total permissible weight of 39,000 kg-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week 37 / 2026

Condition: new, maximum load weight: 26,840 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space volume: 25 m³, Year of construction: 2025, Brake system: Hfodpfsw Eg Eqjx Alyok * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 2 x 9 ton BPW axles * Lift axle with traction aid * Reinforced single-leaf torsion suspension ----Suspension: * Air suspension with automatic lowering during tipping process (to increase stability, can be deactivated for overhead pavers) ----Electrics / Lighting: * SmartBoard (lifting and lowering, lowering of lift axle, traction aid, mileage display, axle load display, ECAS, error memory readout) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective roof * 1 additional LED work light * Flashing side marker lights * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Aluminium air tank * Telescopic steel landing legs with base plate (can only be removed when empty) * 4 m aluminium ladder stored on the right side above the mudguards * Closed single-piece plastic mudguards * Folding underrun protection * Tow eye at the rear * Folding boarding ladder on the front left side * Document box on the front wall ----Chassis: * High chassis frame made of high-strength fine-grained steel ----Tipping Body: * Half-shell steel rear tipper body made from STEELECT 450 steel - HBW 450 * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with sturdy continuous inward-inclined top rail * Front and rear walls slanted ----Thickness of floor, side walls, front and rear walls: * Custom floor 5 / 6 mm * Front wall 5 mm * Rear wall 5 mm * Side walls 5 mm ----Hydraulic Ram: * Front hydraulic ram with medium working pressure ----Hydraulic Tailgate: * Superimposed hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Electric sliding tarpaulin - RAL 9006 white aluminium - with manual switch on chassis and remote control ----Saddle height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Loading volume: * Approx. 25 m³ ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General Information: * Errors and prior sales excepted * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 27,760 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, Year of construction: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ---- Axle: * 3 x 9 t BPW axles * 1st axle liftable with traction aid ---- Suspension: * Air suspension with automatic lowering during tipping process (for increased stability, deactivatable for deck pavers) ---- Electrical / Lighting: * Smart Board (lift and lowering system, lowering the lift axle, traction aid, odometer, axle load display, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective cover * 1 x additional LED work light * Flashing side marker lights ---- General Attachments: * Aluminum air tanks * Telescopic steel landing legs with base plate (can be uncoupled only when empty) * Closed plastic single mudguards * 4 m aluminum side access ladder, stored on the right side above mudguards * Foldable underrun protection * Rear towing eye ---- Chassis: * High chassis frame made of high-strength fine-grained steel, heavy-duty version ---- Tipping Body: * Half-shell steel rear tipping trough made entirely of STEELECT 450 steel -HBW 450- * Side walls with robust continuous inward-sloping top rail * External aluminum access steps and platform in front of front wall ---- Floor, Side Walls, Front and Rear Wall Thickness: * Front and rear walls inclined * Front wall and rear wall: 5 mm * Side walls: 6 mm * Floor: 8 mm HBW 450 steel ---- Hydraulic Ram: * Front hydraulic ram with medium working pressure ---- Hydraulic Tailgate: * Laying hydraulic as well as pendulum tailgate * Hydraulic tailgate controlled via mechanical ball valve ---- Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminum ---- Loading Volume: * approx. 25 m³ ---- Saddle Height: * Unladen approx. 1,340 mm Hedpfsw Eg Edox Alysfk * Laden approx. 1,330 mm ---- Paintwork: * Chassis painted RAL 7021 black grey * Tipping body painted RAL 9006 white aluminum ---- General Information: * --Permissible gross vehicle weight technically up to 39,000 kg-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ---- Delivery Time: * Available from week 11/2026

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes ----Axles: * 2 x 9 t BPW Eco Plus axles ----Suspension: * Air suspension with lowering function * Reinforced single-leaf trailing arm spring ----Drawbar: * Drawbar 2,600 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle ----Electrical / Lighting: * Wabco Smartboard * 15-pin power connector * Preparation for Motec rear-view camera * LED tail lights with protective cover * 2 rear LED work lights * Electrical pre-wiring for MOTEC rear camera ----General attachments: * Aluminum air tank 60 ltr * Foldable side underrun protection * Enclosed plastic mudguards * Bolted underrun protection * Foldable rear A-sign * Plastic toolbox rear right * Steel mesh box rear left * Side underrun protection ----Roller track surface: * Roller track length approx. 7,115 mm * Lowered roller surface with manually insertable wheel chocks - two positions - at the front, each with 2 integrated pneumatic locks in the cross members ----Load securing: * Automatic container lock after uncoupling the braking system from the tractor unit * Side lashing eyes for additional load securing ----Loading height: * In driving position approx. 1,065 mm ----Loading dimensions: * Dimensions for 5,000 - 7,000 mm container lengths according to DIN 30722-1/2, DIN 14505 ----Paintwork: * Chassis with cataphoretic primer (KTL) ----Tires: Hfjdpfx Asxxf T Dolysk * Tires 265/70 R 19.5 * Tire pressure monitoring system (TPMS) ----General information: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately ex Egsestorf

Condition: new, maximum load weight: 28,660 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 3 x 9 ton BPW axles * 1st lift axle with starting aid ----Suspension: * Air suspension with automatic lowering during tipping operation (increases stability; can be deactivated for paver operation) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General Fittings: * Aluminum air tank * Jost telescopic steel landing legs with base plates (can only be dropped with empty trailer) * 4 m aluminum side ladder stowed on the right above the mudguards * Closed plastic single mudguards * Folding underrun protection * Rear towing eye * Folding access ladder at the front left side * Document box on front wall ----Frame: * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members ----Tipping Body: * Half-shell steel rear tipper body (front hydraulic cylinder with medium working pressure) * Front wall with 600 mm front canopy as tarpaulin carrier * Side walls with sturdy continuous upper rail inclined inward * Front and rear walls slanted * Overlapping tailgate with rubber seal and 2 additional toggle locks, as well as automatic 2-hook lock ----Thickness of floor, side walls, front and rear wall: * Front wall: 4 mm BS 70 steel * Tailgate: 4 mm HBW 400 steel * Side walls: 4 mm HBW 450 steel * Tailored floor: 5 / 6 mm Hardox 450 steel Hfsdper Exzmofx Alyjk ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminum- with chassis-mounted switch and radio remote control ----Load volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminum ----General information: * --Technical gross vehicle weight possible: 39,000 kg-- * Subject to prior sale and errors * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately from Egestorf on the A7

Condition: used, mileage: 1,001 km, color: blue, driver cabin: other, gearing type: other, loading space volume: 10 m³, loading space length: 4,200 mm, loading space width: 2,360 mm, loading space height: 1,000 mm, Vehicle location: Bovenden, steel body, flap, Jet sidewalls. Body: Meiller tipper box approx. 10 cbm. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, interim sale and errors excepted! Hfodpfovhg D Tsx Alyek