Used Kögel Skm Semitrailers for sale (268)

Condition: used, first registration: 03/2018, overall weight: 39,000 kg, empty load weight: 6,760 kg, color: yellow, gearing type: other, emission class: none, maximum load weight: 32,240 kg, next inspection (TÜV): 02/2026, suspension: air, loading space volume: 101 m³, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, tire size: 435/50 R19.5, front tire size: 435/50 R19.5, rear tire size: 435/50 R19.5, driver cabin: other, Equipment: ABS, additional headlights, chassis, compressed air brake, electronic stability program (ESP), fog lights, lighting, truck registration, Kögel 3-Axle MEGA Curtainsider with Rear Forklift Mount * Sliding curtains on both left and right sides * Edscha sliding roof tarpaulin * Lift axle – 1st axle * SAF axles * SAF Tire Pilot System: automatic tire inflation and monitoring system * Disc brakes, diameter 370 mm * Lifting roof * Steel pallet stop strips with VarioFix perforated pattern on both sides * 30 mm thick panel floor * Tyres: 435/50 R19.5 * Storage for piggyback forklift transport at the rear of the MEGA trailer * Counterweight holder on the front wall * ALU+wood slats * One toolbox per side * Air suspension (raise/lower) * ABS, EBS, ALB, LSV, CDF * Rear portal doors * 3 pairs of telescopic sliding stanchions with holders, 600 mm high, for 5 inserted slats stacked * Vario-Fix steel perforated outer frame with 3 pairs of stanchion sockets * 13 pairs of lashing rings in the outer frame, permissible pulling force 2,000 kg per ring * Body strength according to EN 12642 XL (VDI 2700) * Front wall built to superstructure height with aluminum volumetric corner posts * Loading height (unladen, in driving position, level): approx. 1.02 m * Loading height (laden, in driving position, level): approx. 0.99 m * Max. internal through-loading height at sides: 2.86 m * Internal clear height under roof: 3.00 m * Internal dimensions: L-13.62 m, W-2.48 m * Weight: GVW-39,000 kg, Curb weight-6,760 kg, Payload-32,240 kg * Chassis color: RAL 9005 deep black, powder-coated; tarpaulin color: narcissus yellow Mehler 137 (matches RAL 1007) * German vehicle with German documents! * Very good condition! * 1 previous owner * First registration: 20.03.2018 * TÜV valid until 02/2026 * Safety inspection (SP) until 08/2025 * VIN: WK0S0002400222027 Codpfx Ahoyct Nve Tjgp Subject to prior sale, errors and modifications excepted! Company logos have been removed in some images – please ask if needed! No guarantee for the functionality of listed extras! Your contact: Christoph Ott Tel. & WhatsApp:

Condition: used, first registration: 04/2018, overall weight: 39,000 kg, empty load weight: 6,760 kg, color: yellow, gearing type: other, emission class: none, Year of construction: 2018, maximum load weight: 32,240 kg, next inspection (TÜV): 08/2025, suspension: air, loading space volume: 101 m³, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, tire size: 435/50 R19.5, front tire size: 435/50 R19.5, rear tire size: 435/50 R19.5, driver cabin: other, Equipment: ABS, additional headlights, chassis, compressed air brake, electronic stability program (ESP), fog lights, lighting, truck registration, Kögel 3-Axle MEGA Curtainsider with Rear Forklift Mounting * Sliding curtains left and right * Edscha sliding roof cover * Lift axle - 1st axle * SAF axles * SAF Tire Pilot system - tire inflation and monitoring system * Disc brakes, diameter 370 mm * Lifting roof * Steel pallet stop strips with VarioFix hole pattern on both sides * 30 mm thick floor panels * Tires: 435/50 R19.5 * Mounting for piggyback forklift transport at the rear of the MEGA trailer * Bracket for counterweight on the front wall * ALU + wooden slats * One toolbox per side * Air suspension (raise/lower) * ABS, EBS, ALB, LSV, CDF * Rear portal doors * 3 pairs of telescopic sliding stanchions with 600 mm high receptacles for 5 insertable slats each * VarioFix steel outer frame with 3 pairs of stanchion holders * 13 pairs of lashing rings in the outer frame, permissible tensile force 2,000 kg per ring * Complies with body stability standard EN 12642 XL (VDI 2700) * Front wall in superstructure height with aluminum volume corner stanchions Cjdpfxeyct Eqo Ah Togp * Loading height unladen, in driving position, horizontal: approx. 1.02 m * Loading height laden, in driving position, horizontal: approx. 0.99 m * Maximum interior through-loading height at the sides: 2.86 m * Interior light height under roof: 3.00 m * Internal dimensions: L – 13.62 m, W – 2.48 m * Weights: Gross – 39,000 kg, Tare – 6,760 kg, Payload – 32,240 kg * Chassis color: RAL 9005 jet black, powder-coated; curtain color: Mehler 137 narcissus yellow (approx. RAL 1007) * German vehicle and German documents! * Excellent condition! * 1 previous owner! * First registration: 12.04.2018 * TÜV valid until 08/2025 * Safety inspection valid until 02/2025 * VIN: WK0S0002400222021 Subject to prior sale, mistakes and changes excepted! Company logos may have been removed in parts of the pictures—please inquire for details! No guarantee on the function of extra features! Your contact: Christoph Ott Tel. + WhatsApp:

Condition: excellent (used), functionality: fully functional, empty load weight: 8,776 kg, maximum load weight: 27,224 kg, overall weight: 36,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2024, next inspection (TÜV): 04/2026, loading space length: 13,325 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 80 %, color: white, Year of construction: 2023, Equipment: ABS, cooling unit, our vehicle number #30615 - 3x BPW axles - Tire size: 385/65 R 22.5 - Permissible total weight: 36,000 kg - Payload: 27,224 kg - Unladen weight: 8,776 kg - Internal body dimensions (L): L: 13,325 mm W: 2,490 mm H: 2,650 mm Volume: 88 m³ - Double deck - Refrigeration unit: TK Advancer A-500 with 1,269 operating hours - Swing doors - Disc brakes - Pharmaceutical version - Flower width - Diesel/electric cooling - Temperature recorder: TouchLog Premium Cgedpjxn Nchsfx Ah Tsp - Aluminium chequered floor - Wabco Smart Board - Wabco TrailGuard - Lift axle 1 and 3 - Jost landing gears - 1 row of lashing rails - Simple external locking bars - Lift/lower - ABS/EBS - 2x tool boxes - Work lights - Axle load indicator Financing available on request!

Condition: good (used), axle configuration: 3 axles, first registration: 02/2016, loading space length: 13,300 mm, loading space width: 2,500 mm, loading space height: 2,670 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,770 mm, color: white, Year of construction: 2016, Equipment: ABS, tail-lift, Axle configuration Tyre size: 385/65R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Codpfxoxd Tbgs Ah Tsgp Empty weight: 9.000 kg Carrying capacity: 30.000 kg GVW: 39.000 kg Functional Tail lift: D'HOLLANDIA, slider lift, 2000 kg Cooling: 0 °C to 30 °C Cooling engine: diesel and electric (12492 operating hours diesel; 7392 electric) Wall thickness: 5 mm Condition Technical condition: good Visual appearance: good Identification Registration number: OP-66-BZ Other information Cool unit make: Carrier Cool unit brand: Carrier

Condition: new, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 12,360 mm, total width: 2,550 mm, total height: 1,800 mm, Year of construction: 2021, Equipment: ABS, Swap chassis trailer for 40', 2x 20', 1x 30', 1x 40'HC container Cgedpfx Ahskc T Ngs Tjp * Lift axle * Rear pneumatically extendable by 1360 mm * SAF axles with disc brakes * Jost landing legs * Wabco Trailer EBS-E, ABS * Haldex Colas air system * Wheel chocks ----Vehicle number 6945 -----Errors and interim sale excepted WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us via WhatsApp Whatsapp Whatsapp

Condition: new, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 12,360 mm, total width: 2,550 mm, total height: 1,800 mm, Year of construction: 2021, Equipment: ABS, Swap body trailer for 40', 2x 20', 1x 30', 1x 40'HC containers * Lift axle * Rear pneumatically extendable by 1360 mm * SAF axles with disc brakes * Jost landing gears * Wabco Trailer EBS-E, ABS * Haldex Colas air system * Wheel chocks ----Vehicle number 6915 -----Subject to errors and prior sale WhatsApp support available! If you have questions about the vehicle or need more information, feel free to message us conveniently via WhatsApp Whatsapp Whatsapp Codpfx Ajkbvvish Tegp

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment. Full equipment details available upon request. Frame: * Standard ladder-type steel lightweight frame with through crossmembers * Pre-cambered chassis frame * Cover plate between side frame and main beams as tire protection for the drive axle wheels of the tractor unit Cgsdpox Tx Efjfx Ah Top * Approx. 8 mm thick coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 Chassis: * Axle lift mechanism on axle 1 * BPW three-axle ECO Air unit with disc brakes, approx. Ø 370 mm, ET 120 * Air suspension, approx. 260 mm stroke Vehicle Tyres: * 6x 445/45 R 19.5, 160J tires Chassis attachments: * Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-sided operation on the right in direction of travel * Tool-free folding side underrun protection, right and left in direction of travel * Spare wheel carrier with winch including 1 wheel fixing kit, installed behind the axle unit * Mounting for 16 square tube stake pockets approx. 80 x 80 x 1,990 mm, installation on both left and right sides of the longitudinal beam in direction of travel * Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed at rear left in the direction of travel * Rear right retractable boarding ladder Brake / Air Suspension System: * EBS 2S/2M system with stability program (includes ABS/ALB function), EBS socket ISO 7638 (without connecting lines) * Parking brake as spring-actuated brake, external pneumatic connections, as well as external EBS diagnostic connector via ISO 7638 socket * WABCO EBS system * Air suspension system including one lift and lower valve, installed on the left behind the axle unit in direction of travel. Driving position adjusts automatically * Two foolproof coupling heads in front ISO 1728 * Brake and air reservoir tanks made of steel (EN 286-2) Floor: * Plywood floor panels, approx. 30 mm thick, multi-glued * Rear floor sealed * Pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 pocket rail strips (18 stake pockets per strip: 4 outside + 10 in the center per strip) Front wall: * Approx. 2,000 mm high front wall with high-volume corner stanchions made of steel, profiled steel sheet, bolted/riveted to the frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used for tensioning, especially if the vehicle is operated without side boards and tailgate/door! * Side wall VarioFix steel perforated outer frame without stake carriers * 24 pairs of lashing rings in the outer frame (to EN 12640), permissible tensile force approx. 5,000 kg per ring Electrics / Electronics: * Steel light support, positioned above the underrun protection * KÖGEL LUXIMA Premium package consisting of: LED license plate lighting, LED marker lights and reflectors front, flashing LED side marker lamps, Superseal and bayonet light connectors * 2 outline lights with arm, fitted to the multi-chamber tail lights * 2 multi-chamber tail lights * Fixed adapter box with 2x 7-pin sockets (1x ISO 1185 / 1x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098 * Compact LED revolving beacon, orange, with mounting tube, arranged on the light support. Switch in the lamp casing

Condition: used, maximum load weight: 34,070 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 08/2015, next inspection (TÜV): 08/2025, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Kögel container semi-trailer container chassis S24-2 extendable 40" ### Chassis with pneumatically extendable rear ### ----* Container intake: 1x 20 ft centered, 1x 20 ft flush with rear, 2x 20 ft, 1x 30 ft or 1x 40 ft ---- Permissible total weight: 39,500 kg, Unladen weight: 5,430 kg, Payload: 34,070 kg, Distance between TwistLock locks from rear to front: 2,630 / 5,850 / (TWIST-LOCK MISSING 6,350) / 7,230 / 8,500 / 8,930 / 12,220 mm, SAF axles, Lift axle 1st axle, Air suspension, Disc brakes, Underrun protection right, left and rear, 2x crank support operable from the right, Spare wheel holder, EBS, ABS, Haldex brake system, Wheelbase: approx. 6,435 x 1,410 x 1,310 mm, External dimensions retracted LxW: approx. 11,450 x 2,550 mm, External dimensions extended LxW: approx. 12,820 x 2,550 mm, Fifth wheel coupling height: approx. 1,220 mm, Loading height lowered: approx. 1,080 mm, Unladen loading height above axles center: approx. 1,165 mm, Codpfx Aswrkigjh Tjgp Loaded loading height above axles center: approx. 1,135 mm, Neck frame height: approx. 130 mm, Tires: 385/55R22.5, Tire tread depth left front: 12 mm, Tire tread depth left middle: 11 mm, Tire tread depth left rear: 10 mm, Tire tread depth right front: 13 mm, Tire tread depth right middle: 11 mm, Tire tread depth right rear: 13 mm, Foldable TWIST-LOCK receptacle at position 6,350 mm missing, Locking the 20 ft container at the front not possible, as both TWIST-LOCKs are missing!! Crank support only extends on the right side. (Rod connection to left crank support has too much play) Further equipment: Suitable for transporting the following container types according to ISO 668/1496: 40" High Cube, 20" ISO, 30" ISO, Front overhang: approx. 1,410 mm, Front overhang radius: approx. 1,650 mm, Rear swing radius: approx. 2,160 mm, Construction height above fifth wheel: approx. 130 mm, Fifth wheel coupling height loaded possible according to ISO 1726: approx. 1,120 - 1,270 mm, Braking system according to ECE-R13, Electrical system according to ECE-R48, Chassis frame made of high-quality steel, but without an outer frame, Coupling plate with a 2" kingpin, With cross member and container locks to accommodate: a) 1 x 40" High-Cube Container (frame extended), b) 2x 20" ISO Container (frame extended), c) 1x 30§ ISO Container flush with the rear (frame extended), d) 1x 20" ISO Container flush with the rear (frame retracted), e) 1x 20" ISO Container centered (frame retracted), 4 pairs of heavy-duty lashing rings, Rear frame extension, extendable by approx. 1,370 mm, load capacity: 5,800 kg, with spiral cable, Length adjustable by 1 pneumatic cylinder, Low-maintenance guidance on special plastic slide bearings and 2 extension rollers, Automatic pneumatic locking of the extension, Axle lift for 1st axle, control fully automatic, axle load dependent, With switchable lowering of the lift axle in every load area, Additionally, electrically switchable lowering from the driver’s cab (switch required in the cab!), operation at the chassis still possible, With traction aid, functional up to an axle load excess of 30% and a speed up to 25 km/h, Three-axle SAF INTRADISC plus INTEGRAL assembly, with 430 mm disc brakes, ET 120, Air suspension with 180 mm stroke, Mechanical trailer supports with compensating foot, 24t lifting capacity, One side operation to the right in travel direction, Spray protection system (spray suppression) according to Regulation (EU) No. 109/2011 for standard three-axle

Condition: used, maximum load weight: 34,200 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 07/2025, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, Kögel Container Semi-Trailer Container Chassis S24-2 extendable 40" ### Chassis with pneumatically extendable rear ### ----* Container loading: 1x 20 foot centered, 1x 20 foot flush with the rear, 2x 20 foot, 1x 30 foot or 1x 40 foot ---- Permissible total weight: 39,500 kg, Curb weight: 5,300 kg, Payload: 34,200 kg, Distances between TwistLock locks from rear to front: 2,630 / 5,850 / 6,350 / 7,230 / 8,500 / 8,930 / 12,220 mm, SAF axles, Lifting axle on the 1st axle, Air suspension, Disc brakes, Underride protection right, left and rear, 2x crank supports operable from the right, Spare wheel holder, EBS, ABS, Haldex braking system, Wheelbase: approx. 6,435 x 1,410 x 1,310 mm, External dimensions retracted LxW: approx. 11,450 x 2,550 mm, External dimensions extended LxW: approx. 12,820 x 2,550 mm, Saddle height: approx. 1,220 mm, Loading height lowered: approx. 1,080 mm, Unloaded loading height above center of axle assembly: approx. 1,165 mm, Loaded loading height above center of axle assembly: approx. 1,135 mm, Neck height of frame: approx. 130 mm, Tires: 385/55R22.5, Tread depth left front: 12 mm, Tread depth left middle: 11 mm, Tread depth left rear: 8 mm, Tread depth right front: 10 mm, Tread depth right middle: 11 mm, Tread depth right rear: 12 mm, Further equipment: Suitable for transporting the following container types according to ISO 668/1496: 40" High Cube, 20" ISO, 30" ISO, Front overhang: approx. 1,410 mm, Front overhang radius: approx. 1,650 mm, Rear swing radius: approx. 2,160 mm, Build height above fifth wheel: approx. 130 mm, Possible loaded fifth wheel height according to ISO 1726: approx. 1,120 - 1,270 mm, Brake system according to ECE-R13, Electrical system according to ECE-R48, Chassis frame made of high-quality steel, but without an outer frame, Coupling plate with a 2" kingpin, With cross member and container locks for the following: Cgjdswrkiaspfx Ah Top a) 1 x 40" High-Cube container (frame extended), b) 2x 20" ISO container (frame extended), c) 1x 30" ISO container flush with the rear (frame extended), d) 1x 20" ISO container flush with the rear (frame retracted, e) 1x 20" ISO container centered (frame retracted), 4 pairs of heavy-duty lashing rings, Rear frame extension, extendable by approx. 1,370 mm, capacity: 5,800 kg, with spiral cable, Length adjustable via 1 pneumatic cylinder, Low-maintenance guidance on special plastic sliders and 2 extension rollers, Automatic pneumatic locking of the extension, Axle lift for 1st axle, control fully automatic, depending on axle load, with switchable lowering of the lifting axle in any load range, Additionally electrically switchable lowering from the cab (switch in cab required!), operation on chassis still possible, with drive-off aid, operational up to an axle load excess of 30% and speed up to 25 km/h, Three-axle unit SAF INTRADISC plus INTEGRAL, with 430 mm disc brakes, ET 120, Air suspension with 180 mm stroke, Fifth wheel supports mechanically with compensation foot, 24t lifting capacity, One-side operation on the right in driving direction, Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for standard three-axle unit consisting of: 3 pairs of semi-circular mudguards with anti-spray system, 2 wheel chocks with holder, Side guard as per ECE-R73, Tool-less foldable side guard on the right in driving direction, Underride protection made of square steel pipe according to ECE-R58 with a protected light carrier above it, EB

Condition: used, maximum load weight: 35,650 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 05/2012, Year of construction: 2012, Equipment: ABS, * Flatbed Cgjdjwu S I Aspfx Ah Top * Drum brakes Errors and prior sale excepted Viewing by appointment only WhatsApp inquiries will not be answered

Condition: used, functionality: fully functional, empty load weight: 6,620 kg, maximum load weight: 29,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 90 %, color: grey, Year of construction: 2024, Equipment: ABS, Object number #30713 Coil trough 7,200 mm Cjdpfx Ahex Tt Sgj Tjgp BPW axles Disc brakes Lifting axle Tyres 385/65 R 22.5 Aluminium rims Body inside dimensions: 13,620 x 2,480 x 2,700 mm (side loading opening 2,630 mm) Portal doors double internal locking rods Sliding curtain Sliding roof Load securing certificate EN 12642 XL Load securing certificate DCE 9.5 Drinks certificate incl. barrel packaging Vario-Fixx steel chassis outer frame 13 pairs of lashing rings 8 pairs of 80x80 mm stake pockets Wabco Smart Board Forklift accessible Raise/lower function ABS/EBS Work lights Toolbox SAF landing legs Interior lighting RSAB (Roof Safety Airbag) Leasing or financing available on request!!

Condition: used, maximum load weight: 34,200 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 07/2015, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, Kögel Container Semi-Trailer Container Chassis S24-2 extendable 40" ### Chassis with pneumatically extendable rear ### ----* Container mount: 1x 20-foot center, 1x 20-foot rear flush, 2x 20-foot, 1x 30-foot or 1x 40-foot ---- All air bellows have been replaced Both crank supports have been replaced Permissible total weight: 39,500 kg, Empty weight: 5,300 kg, Payload: 34,200 kg, Distances TwistLock fasteners from back to front: 2,630 / 5,850 / 6,350 / 7,230 / 8,500 / 8,930 / 12,220 mm, SAF axles, Lift axle 1st axle, Air suspension, Disc brakes, Underrun protection right, left, and rear, 2x crank support operable from right, Spare wheel holder, EBS, ABS, Haldex brake system, Wheelbase: approx. 6,435 x 1,410 x 1,310 mm, External dimensions retracted LxW: approx. 11,450 x 2,550 mm, External dimensions extended LxW: approx. 12,820 x 2,550 mm, Fifth wheel height: approx. 1,220 mm, Loading height lowered: approx. 1,080 mm, Unladen loading height over center of axle assembly: approx. 1,165 mm, Laden loading height over center of axle assembly: approx. 1,135 mm, Frame neck height: approx. 130 mm, Tires: 385/55R22.5, Tread depth tires left front: 9 mm, Tread depth tires left middle: 13 mm, Tread depth tires left rear: 12 mm, Tread depth tires right front: 10 mm, Tread depth tires right middle: 11 mm, Tread depth tires right rear: 10 mm, Additional equipment: Suitable for transport of the following container types according to ISO 668/1496: 40" High Cube, 20" ISO, 30" ISO, Front overhang: approx. 1,410 mm, Front overhang radius: approx. 1,650 mm, Rear swing radius: approx. 2,160 mm, Cgjdswrkitjpfx Ah Top Build height over fifth wheel coupling: approx. 130 mm, Fifth wheel coupling height loaded possible according to ISO 1726: approx. 1,120 - 1,270 mm, Brake system according to ECE-R13, Electrical system according to ECE-R48, Chassis frame made of high-quality steel, but without external frame, Coupling plate with a 2" fifth wheel kingpin, With cross member and container locks for accommodating: a) 1 x 40" high-cube container (frame extended), b) 2x 20" ISO containers (frame extended), c) 1x 30" ISO container rear flush (frame extended), d) 1x 20" ISO container rear flush (frame retracted), e) 1x 20" ISO container centered (frame retracted), 4 pairs of heavy duty lashing rings, Rear frame extension, extendable by approx. 1,370 mm, load capacity: 5,800 kg, with spiral cable, Length adjustable via 1 pneumatic cylinder, Low-maintenance guide on special plastic sliders and 2 extension rollers, Automatic pneumatic locking of the extension, Axle lift for 1st axle, fully automatic control, axle-load dependent, with switchable lowering of the lift axle in every load range, Additionally electrically switchable lowering from the driver's cab (switch in the cab required!), operation on the chassis still possible, with starting aid, functional up to an axle load exceedance of 30% and a speed up to 25 km/h, Three-axle unit SAF INTRADISC plus INTEGRAL, with 430 mm disc brakes, ET 120, Air suspension with 180 mm lift, Mechanical landing gears with compensating foot, 24ton lifting capacity, One-side operation in driving direction right, Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for standard three-axle unit consisting of: 3 pairs of semicircular fenders with anti-spray system, 2 chocks with holder, Side guard according to ECE-R73, Tool-free foldable side guard in driving direction right, Underrun protection made

Condition: new, empty load weight: 2,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2026, suspension: air, tire size: 4-fach 445/45 R19.5, wheelbase: 5,040 mm, color: black, Equipment: ABS, 2-axle swap body trailer, new vehicle. Version: Maxi. AW 18\nABS/EBS disc brake, axles (SAF, manufacturer's choice) \nDimensions: L=9,160 mm, W= 2,550 mm. Unladen weight: 2,560 kg.\nTop lift: 1,400 mm, bottom lift: 1,000 mm, ride height: 1,060 mm.\n\nTires: 4x 445/45 R19.5 (MICHELIN, manufacturer's choice) without spare wheel basket. \nSpare wheel and basket available at an extra charge. \n\nWheels with internal sensors and tire pressure monitoring system according to UN ECE R 141 (TPMS).\n\nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\n\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'. It cannot be loaded flush with the rear due to the arrangement of the underride guard in accordance with the EC standard.\n\nSplash protection system (spray mist suppression). \n\nMechanically telescopic drawbar with height adjustment device with drawbar eye Ø 40 mm according to DIN 74054. Drawbar length approx. 2,250 mm, extended by 3 x 100 mm.\n\nRigid rear underride guard made of steel according to ECE-R58,\nUnderride guard bolted instead of welded to the side member lower chord.\n\nKÖGEL LUXIMA Premium package, consisting of:\nLED license plate lighting, LED marker lights and front reflectors\nFlashing LED side marker lights\nSuperseal and bayonet connections for the lights.\n\nComplies with vehicle class FL, AT.\n\nOrange-colored reflective signs (self-adhesive) according to ECE-R70, attached to the left and right rear underride guard.\n\nElectrics: 15- or 2x7-pole according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll specified values are approximate dimensions in mm and kg. \n\nDelivery date on request. Leasing possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Cjdpjt Eh E Nsfx Ah Tsgp

Condition: used, empty load weight: 6,610 kg, maximum load weight: 28,390 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2017, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, tire size: 435/50 R19,5, color: grey, gearing type: mechanical, EU vehicle, unladen weight: 6,610 kg, permissible total weight: 35,000 kg, cargo compartment (L W H): 13,600 mm x 2,480 mm x 3,000 mm. Tire size: 435/50 R19.5, cargo volume: 101 m³, 1st axle: , 2nd axle: , 3rd axle: . You can find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer tailored financing options, full service, and telematics solutions. We are happy to advise you. Cgjdpfex Uttgox Ah Top

Condition: used, empty load weight: 7,796 kg, maximum load weight: 27,204 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2024, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, color: other, Year of construction: 2023, gearing type: mechanical, EU vehicle, unladen weight: 7,796 kg, gross permitted weight: 35,000 kg, cargo space (L W H): 13,400 mm x 2,490 mm x 2,700 mm, tyre size: 385/65 R22.5, cargo volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , full air suspension, pallet box, electronic braking system (EBS), spare wheel holders (2x), ferry lashings, electrical connectors 1x15 and 2x7 pin. You can find our complete vehicle range on our website. Interested in financing? With our Value Added Services, we offer tailored financing options, full service and telematics solutions. We will be happy to advise you. Cgsdpfx Ahex Uttms Tjp

Condition: used, machine/vehicle number: 120, empty load weight: 7,450 kg, maximum load weight: 26,050 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 08/1989, loading space length: 12,800 mm, loading space width: 2,400 mm, suspension: air, tire size: 385/65 r22,5, color: green, Equipment: ABS, Drum brake BPW axles 2nd + 3rd axle mechanically steered Cgedpfx Asn Slvqeh Tep Errors excepted

Condition: used, first registration: 06/2012, overall weight: 16,000 kg, color: blue, total width: 2,550 mm, total height: 2,600 mm, loading space length: 7,200 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, Year of construction: 2012, Sliding side curtain, sliding roof, double-wing rear door, plywood floor. Cgedex Tbq Rjpfx Ah Tsp

Condition: good (used), axle configuration: 3 axles, first registration: 03/2017, loading space length: 13,620 mm, loading space width: 2,550 mm, loading space height: 2,700 mm, suspension: air, color: blue, Year of construction: 2017, Axle configuration Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 6.120 kg Carrying capacity: 32.880 kg GVW: 39.000 kg Condition Csdpfxoxyy Tbo Ah Togp Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: used, mileage: 1 km, first registration: 01/1998, color: white, loading space volume: 46 m³, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, BDF system 7,450 mm long, insulated box body, 1 anchor rail for locking bars on each side, screen-printed floor, roller shutter at the rear, piggyback, vehicle can be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us! Cedpfx Ahjwmu Ays Tegp

Condition: used, maximum load weight: 29,280 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2010, Year of construction: 2010, Equipment: ABS, Krone 3-axle Dautliner Condition: very good, TÜV, tires almost new 90-95%, new floor Cgedpfjx S Ty Ijx Ah Tjp

Condition: used, maximum load weight: 15,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2015, Year of construction: 2015, Equipment: ABS, Kögel WAB AW18 - 22.5 Condition: good Cgedox Sbqnspfx Ah Top Tyres: 90%

Condition: new, machine/vehicle number: 003, empty load weight: 2,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, Year of construction: 2026, Equipment: ABS, Kögel Combi swap body trailer; - New vehicle - turntable - GG 18000 kg - for parking height 1220-1320 mm - Driving height unloaded 1255 mm - 40 mm towing eye Cedpfx Asg Dkwreh Tegp - BPW axles 2x9 tons, disc brakes, ET 120 (partly also with SAF axles) - Lifting and lowering - Tire size 385/ n. Manufacturer's choice - optionally also with 385/55 tires possible - ABS-EBS - Warning plates ECE-R70 2 pcs. - Kögel KTL system corrosion-protected (Nano Ceramic) Prices do not include 19% VAT ex location. Offer is subject to change, errors, alterations and prior sale excepted. Leasing/financing/hire purchase are possible, subject to credit check. Leasing from 273.00 per month plus 19% VAT. If you have any questions, please do not hesitate to contact us. Pictures are for demonstration purposes only and may show optional extras.

Condition: new, machine/vehicle number: 009, empty load weight: 6,400 kg, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, suspension: air, tire size: 445/45r19.5, color: silver, Year of construction: 2026, Equipment: ABS, KÖGEL Mega Semi-Trailer SN 24; - New vehicle - 3x9 t SAF-Intradisc or BPW axles - First axle liftable - 445/ tires, 6-fold - VarioFix hole pattern left and right - 3-row aluminium slats in V-shape - 13 pairs of lashing rings on the outer frame, each ring rated at 2,500 kg tensile strength Cgodpfohvydaox Ah Tsp - Sliding roof, can be moved forward - Sliding curtain left and right - Lifting roof mechanical/hydraulic - Kögel LUXIMA Premium Package (LED) - Certificates: XL12642, VDI2700, DC - Curtain color generally RAL 9006 white aluminum Prices are subject to 19% VAT, ex works. Offer is subject to change, errors, modifications, and prior sale reserved. Leasing/hire purchase/financing available, subject to credit check. Leasing from €527.00 per month plus 19% VAT. We are always available to answer your questions. Images are for demonstration purposes and may show special equipment subject to an additional charge.

Condition: new, Year of construction: 2026, color: white, overall weight: 16,000 kg, empty load weight: 2,350 kg, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,510 mm, machine/vehicle number: Swap, Kögel SWAP swap-body platform / sliding tarpaulin; - New vehicle - GG 16000 kg, NL approx. 13600 kg - Side loading height approx. 2430 mm (also available as Midi with approx. 2680 mm, at extra charge) - Height under roof approx. 2510 mm (Midi approx. 2780 mm) - Parking height according to DIN EN 284, approx. 1320 mm - Type C745 - 4x support legs 1020-1320 mm - Rear access ladder - Platform floor 30 mm thick - Quick-release device front + rear for side tarpaulin - Certificate for load securing according to standard EN 12642 XL (VDI 2700) - Double folding door at rear, approx. 2480 mm - Sliding side panels - 3 rows of V-aluminum side slats - Vario-Fix steel perforated outer frame with 1 pair of stanchion bearings - 9 pairs of lashing rings to EN 12640, permissible tensile force 2500 kg per ring - Sliding roof, can be moved forwards - 1 pair of steel bumpers 160x85x85 mm - Tarpaulin rope with 2 brackets on the front wall - Sliding tarpaulin approx. 900g/sqm with over-center tensioning system - Frame, chassis and add-on parts Kögel KTL system - Tarpaulin color white (also available in silver) Codpfjhmiywjx Ah Tsgp - Frame and add-on parts in deep black RAL 9005 Leasing/financing/hire purchase are possible, subject to credit check. Leasing from Euro 254.00 per month plus 19% VAT. Offer is subject to change, errors, alterations and prior sale ex works. Please ask for the current delivery time. If you have any questions, please do not hesitate to contact us. Images are for demonstration purposes only and may show optional extras at extra cost. Digital lettering is possible for an extra charge!

Condition: used, axle configuration: 3 axles, first registration: 04/2022, total length: 11,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,160 mm, color: black, Year of construction: 2022, Equipment: ABS, = Additional options and equipment = - EBS = Further information = Cgedpfxoxwxm Ue Ah Tsp Axle configuration Tyre size: 385/55R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,230 kg Payload: 35,770 kg Gross vehicle weight: 41,000 kg Functionality Extendable body: Yes Identification Registration number: OT-82-GT