Used Kögel Cargo for sale (3)

Condition: used, maximum load weight: 34,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 04/2026, Equipment: ABS, Extract Equipment List Chassis I 10500.190 - Coil well approx. 9,000 mm (designed according to VDI Guideline 2700) for holding coils with a diameter from min. 900 mm to max. 2,100 mm. Undercarriage I 17160.010 - Axle lift mechanism on axle 1 I 18330.271 - Three-axle SAF INTRADISC module with disc brakes, approx. 430 mm diameter, offset 120. Air suspension with approx. 180 mm lift Djdpfxoxvgqlj Afmokw Vehicle Tyres I 20540.007 - 6 x 385/65 R 22.5, 160J tyres – brand at our discretion 20865.005 - 6 steel rims 22.5 x 11.75, inset approx. 120 mm (ET 120) Brake / Air Suspension System - 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket connection ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connectors, external EBS diagnostic connection via ISO 7638 socket. - 32125.015 WABCO EBS system - 33420.040 Air suspension system incl. one lift and lowering valve, installed left behind axle module. Driving level adjusts automatically. Floor I 27380.144 - Fitted both sides: Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in direction of travel, for inner width approx. 2,468 mm (loading height under outer beam reduced by approx. 20 mm) - 40510.140 Floorboards approx. 30 mm thick, multi-layer bonded plywood, cut-out in coil well area. Coil well side walls clad with approx. 18 mm plywood. - I 40513.020 Floor sealed all around - I 40525.020 20 wooden coil well covers, with approx. 27 mm plate floor - I 40542.011 Stake pockets for square tube insertable posts, approx. 80 x 80 mm, layout per drawing A2: 2 pairs on longitudinal member in 1st and 2nd position, 8 pairs in outer frame - I 40551.108 8 pairs of stake pockets in the coil well for square tube insertable posts approx. 80x80 mm. Arrangement: 1st pair at front of well, 2nd-7th pairs as per standard drawing, 8th pair at rear. Body - 46538.010 Complies with body strength EN 12642 XL (VDI 2700). Certified for a payload of approx. 27,000 kg. Front Wall 41510.125 - Front wall at superstructure height with volume corner posts of aluminium, aluminium hollow profiles riveted, bolted/riveted with frame, 1 pair of lashing rings to EN 12640. - I 41570.050 Inside front wall reinforced with approx. 12 mm phenolic-coated plywood, approx. 1,250 mm high Rear Wall - 42400.563 Double-wing portal rear wall made of aluminium, approx. 2,630 mm clear width - 42505.040 4 integrated locking rods (2 left, 2 right) - I 42540.256 Bolted rear corner posts made of steel at portal height with additional impact protection extending to 1st door hinge - I 42545.020 Corner posts on both sides can be mechanically swung out sideways by approx. 500 mm for loading/unloading. Operation requires sliding roof to be moved forward and rear doors to be opened. - 42548.005 5 pairs of securing slots on rear corner posts Side Wall - 43500.300 3 pairs of KÖGEL sliding posts with mounts approx. 600 mm high for 5 inserted slats above floor level. Fixed to outer frame. - I 43501.005 5 rows of slat mounts consisting of plug-in pockets on the sliding posts and variable supports in the corner posts. - I 43525.016 Variable support as spacer for insertable slats (16 pcs) in the slat depot of sliding and corner posts (height approx. 100 mm above ...

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, SINGLE OWNER – EXCELLENTLY MAINTAINED Djdpfx Aoxlffajfmjkw

Condition: used, maximum load weight: 34,200 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available for immediate or short-term delivery, on our website. Extract from the list of features. Full specification available on request. Chassis * Standard ladder frame in lightweight steel construction with through cross members Dsdevl N N Tepfx Afmjkw * Maximum distributed load of 30 t spread evenly over approx. 1.5 m at payload center of gravity * Coupling plate approx. 8 mm thick, with a 2" kingpin according to DIN 74080 / ISO 337 * Coil well approx. 9,000 mm internal length (in accordance with VDI Guideline 2700) suitable for coils with diameters from min. 900 mm to max. 2,100 mm Undercarriage * Axle lift mechanism on axle 1 * Automatic, load-dependent axle lift control Starting Aid * Activation by pressing the brake 3 times, 30% overload up to a speed of 25 km/h * Operation via switch on chassis * Additional operation possible from the cab (requires cab switch – PIN 12) SAF INTRADISC Three-Axle Unit * With disc brakes approx. Ø 430 mm, ET 120 * Air suspension with approx. 180 mm stroke Vehicle Tyres * 6 x 385/65 R 22.5, 160J * 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis Attachments * Mechanical landing gear with compensating foot, 24 t lift capacity, single-sided operation on the right in direction of travel * Spray suppression system according to Regulation (EU) No. 109/2011 for three-axle units with 385/65 R22.5 tyres, comprising 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with mudflaps between axles 1 and 2, and 1 pair of quarter-circle mudguards with mudflaps behind the axles * Side underrun protection according to ECE-R73 * Storage for 8 square tube stanchions, internal dimensions approx. 340 x 220 x 2,150 mm, fitted behind axle unit * 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm. Installed 1x left and 1x right at the rear Brake / Air Suspension System * EBS system 2S/2M with stability program (includes ABS/ALB function) * Air suspension system including 1 raise/lower valve, mounted to the left behind the axle unit in the direction of travel * Driving position adjusts automatically Floor * Mounted design on both sides * Steel pallet stops with VarioFix hole pattern (bolted), installed left and right in direction of travel, for an internal width of approx. 2,468 mm (internal loading height under outer rail reduced by approx. 20 mm) * Floor panels approx. 30 mm thick, multi-bonded plywood, recessed in the coil well area * Coil well side walls lined with approx. 18 mm thick plywood panels * Perimeter-sealed coil well cover completely made of wood, with floor panels approx. 27 mm thick * Pockets for square tube stanchions approx. 80 x 80 mm, positions as per drawing A2, 2 pairs on longitudinal member in 1st and 2nd positions, 8 pairs on the outer frame * 8 pairs of sockets in the coil well for accepting square tube stanchions approx. 80 x 80 mm, arrangement: 1st pair at the front of the well, 2nd–7th pairs as per standard drawing, 8th pair at the end of the well Body * Quick-release system at front for side curtain with tension tubes and deflection lever * Quick-release system at rear for side curtain with tension tubes and ratchet * Meets body strength requirements according to EN 12642 XL (VDI 2700), certified for a payload of approx. 27,000 kg Rear Wall * Double-wing rear portal doors made from aluminum, approx. 2,630 mm internal height * 4 integrated locking rods (2 left, 2 righ