Used Krone Swap Bodies With Box Body for sale (1,213)

Condition: refurbished (used), functionality: fully functional, color: white, 7.82 m BDF Krone Smooth-Sided Swap Body, used (multiple units available) Color: White Drop-off height: 1120 mm The swap body is watertight and the roller shutter door operates smoothly. Approximate external dimensions (mm): Length 7820 x Width 2550 x Height 2925 Approximate internal dimensions (mm): Length 7700 x Width 2480 x Height 2700 Door opening (mm): Width 2370 x Height 2530 Lashing: Keyhole type Permissible total weight for approval/operation: 16,000 kg Intermodal ready, incl. rail coding to DIN EN 13044 Rail approval Code XL (for rail transport at speeds over 120 km/h) Floor frame: 195 mm high floor module incl. floor panel; rectangular tube longitudinal beams with cross members and outer frame as welded construction with underfloor guide tunnel 4 container corner castings on 20' basis, symmetrical overhangs, 4 grab bar profiles 7 pairs of lashing rings at the sides in the rubbing strip Floor: Type: BO WST 27 mm thick, waterproof bonded phenolic resin-coated plywood floor, strength as per DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg 2 ventilation openings at the front in the floor (as per GGVS) Box body: Superstructure type: AB WST Internal height: 2700 mm Portal height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Lredpfx Aajvxbfmozek Smooth side walls made of galvanized steel sheet panels Roof made of trapezoidal profiled steel sheets, panel height: 25 mm 2 ventilation grills per side wall Rubbing rail and side wall with recesses; internal forklift impact protection, 3-sided, approx. 300 mm high Front wall smooth, made of galvanized steel sheet panels Interior front wall with 21 mm phenolic resin-coated plywood, 750 mm high, above that continuous 12 mm plywood Exterior front wall upper section offset (optimized for cornering) Rear wall with roller shutter door (net width: 2370 mm), with DB Train Plus approval, replaceable rollers Flat steel impact protection for roller shutter guide rails Side walls internally fully covered with keyhole plates 13 steel guide rails recessed left and right for double-deck load bars 13 LM load beams for double-deck loading Horizontal steel impact protection on rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

Condition: ready for operation (used), functionality: fully functional, color: white, 7.45 BDF Krone Jumbo smooth-wall swap body, used Exterior color: White Parking height from 920-1320 mm possible. The swap body is waterproof and the roller door is open. Forklift pockets Stackable External dimensions in mm approx.: Length 7450 Width 2550 Height 2950 Interior dimensions in mm approx.: Length 7289 Width 2470 Height 2700 Door openings in mm: Width 2370 Height 2550 Lashing: Keyhole Weight: Tare 3340 kg Maximum payload: 12660 kg Maximum gross weight: 16000 kg Floor load capacity: 5460 kg Capacity: 49.74 m Lrjdpfxouvibto Aazsk Pallet capacity (in mm) Euro 800x1200 18 Metric 1000x1200 14 Cage mesh 835x1240 16 “Aussie” 1170x1170 12 Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to continuous product improvement.

Condition: new, Year of construction: 2024, color: white, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 45.5 m³, loading space width: 2,470 mm, loading space length: 7,290 mm, loading space height: 2,525 mm, Swap body, smooth steel BDF system, 7,450 mm long. Brand new smooth-walled steel swap body, BDF system, 7,450 mm long, rear portal doors with double internal espagnolette locks. External dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,750 mm. Parking height: 1,320 mm. Total weight: 16,000 kg, empty weight: 2,950 kg. Body in RAL 9010 pure white. Telescopic support legs in RAL 9005 jet black for a storage height of 980 - 1,320 mm. Interior fittings as follows: Roof with anti-condensation coating without roof light window. 27 mm thick, waterproof glued plywood floor, strength according to EN 283, for floor loads up to 5,460 kg forklift axle load. Floor panels with smooth side facing up. Ideal for furniture transport. (A sliding friction value of at least 0.3 is not achieved, therefore the use of anti-slip mats, for example, is necessary for Code XL.) Forklift protection on 3 sides, approx. 360 mm high. Internal end wall with wooden paneling and 3 rows of lashing rails horizontally on the end wall. Internal side walls fully lined with keyhole plates and 3 rows of rod lashing rails horizontally embedded in the side walls. Mounting heights: 800 mm / 1,600 mm / 2,200 mm. Includes 2 locking bars for keyhole plates and combination/slotted-hole lashing rails. Includes load securing certificate according to EN 12642 Code XL. All values given are approximate dimensions in mm and kg. This offer is subject to change without notice; Subject to prior sale. Net prices ex location D-59558 Lippstadt-Rixbeck. Further properties can be found at . . Ledpfjtzdt Ujx Aazerk

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, paint NEW in Premium Plus Used smooth steel swap body BDF system 7,450 mm long, rear with aluminum roller shutter.\nInternal keyhole system in the side walls.\n\nPREMIUM-PLUS refurbishment:\n- Premium 2 K paint finish - high-gloss - here in RAL 9010 white\n- Underbody blasted, primed and repainted in the body color\n- New roller shutter cables\n- New rubber seals on the roller shutter\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom along the entire length\n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Lrjdpfeuzlxmox Aazok

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, premium paint NEW in white Used steel - smooth wall swap body BDF system 7,450 mm long, rear with aluminum roller door.\nInside keyhole system in the side walls.\n\nPREMIUM refurbishment:\n- Premium 2K paint - high gloss in RAL 9010 white\n- Underbody blasted, primed and repainted in RAL 9010 white\n- Support legs repainted in RAL 9010 white\n- Structure completely overhauled with new UVV\n- Roof painted 40 cm all around - rest sprayed\n- Scrub base rolled in gray\n- New galvanized ladder\n- New galvanized gill plates installed after painting\n- Contour marking on the bottom side of the entire length in white\n- Contour marking on the rear in the corners in red\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Lrsdovm Dfxjpfx Aazjk

Condition: used, Year of construction: 2011, color: white, overall weight: 18,000 kg, empty load weight: 3,020 kg, loading space volume: 45.9 m³, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,545 mm, Swap body, corrugated steel, BDF system, 7,450 mm long, NEW PAINT!! Used, fully refurbished corrugated steel swap body. BDF system, 7,450 mm long * Superstructure completely blasted, primed, and NEWLY PAINTED in RAL 9010 white. * Substructure blasted, primed, and treated with underbody protection. * Installation of factory-new aluminum double-wing doors with galvanized rod locks and new rubber seals. Lodpfxsxmkuvs Aazerk * Factory-new telescopic support legs in black * Forklift pockets, corner locks in the roof – stackable * Interior with keyhole plates in the corrugations * Wooden floor * Access ladder at the rear * New UVV (accident prevention regulation) Delivery possible. All stated values are approximate measurements in mm and kg. This offer is subject to change and prior sale. Prices are net ex location D-59558 Lippstadt-Rixbeck. You will find more items at . .

Condition: used, Year of construction: 2011, color: green, overall weight: 16,000 kg, empty load weight: 3,140 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, corrugated steel BDF system 7.45, NEW PAINT in RAL 6024, BRAND NEW portal doors * Structure completely blasted, primed and NEW PAINTED in RAL 6024 traffic green or RAL color as desired.\n* Substructure blasted, primed and painted in body color.\n \n* Installation of brand new aluminum double-leaf doors with galvanized espagnolette locks and new rubber seals.\n\n* Brand new telescopic support legs in black,\n* Forklift pockets, corner locks in the roof - stackable,\n* Inside keyhole plates in the corrugations\n* Wooden floor\n* new UVV\n\nDents behind the keyhole plates unavoidable - some present as used.\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Lsdpfxsvzb Rue Aazjrk

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth wall swap body, BDF system, 7,450 mm long.\nBody newly painted in RAL 7040 window gray. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Lsdpfspg Dtcex Aazork

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, rear roller shutter, branded smooth steel wall swap body with aluminum roller shutter, usable, \nBody de-inscribed, technically checked and provided with new UVV, \nAs long as stocks last, \nNew paint finish on request\n\nAll values given are approximate dimensions in mm and kg.\nDelivery possible. \n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Ljdpfxstw Edho Aazerk

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, corrugated steel BDF system 7.45, NEW PAINT, BRAND NEW portal doors * Structure completely blasted, primed and NEW PAINTED in RAL 9010 white or RAL color as desired.\n* Substructure blasted, primed and painted in body color.\n \n* Installation of brand new aluminum double-leaf doors with galvanized espagnolette locks and new rubber seals.\n\n* Brand new telescopic support legs in black,\n* Forklift pockets, corner locks in the roof - stackable,\n* Inside keyhole plates in the corrugations\n* Wooden floor\n* Access ladder at the rear\n* New UVV\n\nDents at the back of the keyhole plates unavoidable - some present as used.\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change and prior sale.\nPrices net from location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Lredpovxvv Tjfx Aazsk

Condition: used, Year of construction: 2012, color: grey, overall weight: 16,000 kg, empty load weight: 3,240 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, NEW PAINT! Rear portal doors used. Steel smooth-wall swap body. Rear portal doors with external locking rods. Refurbishment: • NEW PAINT – high-gloss in RAL 7042 traffic grey • Undercarriage sandblasted, primed, and finished with black underbody protection • New telescopic landing legs in RAL 9005 black • New rubber seals on the doors • Body completely overhauled with new UVV inspection • New galvanized access ladder Interior with keyhole system and double-deck system. Lrodpfx Aswtru Tjazek All specified values are approximate in mm and kg. Delivery possible. Offer subject to prior sale and change without notice. Prices net ex location D-59558 Lippstadt-Rixbeck. You can find more items at ...

Condition: used, Year of construction: 2008, color: silver, overall weight: 3,100 kg, empty load weight: 16,000 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel Combi-Box BDF system 7.450 mm long, LACK NEW in white aluminum Steel swap body, Combi-Box, rear portal doors with internal espagnolette locks,\nWell preserved,\nDriving direction left sliding tarpaulin with steel insert slats with 3 rows of combination anchor rails, 2 slides,\nFRight smooth steel cassette with keyhole plate with 3 rows of combination anchor rails and lashing points in the scuff plate,\n\n- steel roof and wooden floor, \n\n- body and underbody NEW PAINTED in RAL 9006 white aluminum, support legs NEW telescopic in black, \n\n- body completely checked and repaired\n\n\n-UVV test\n\nAll values given are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found under . Steel/aluminum insertion slats. Lodpsvf Ngrjfx Aazsrk

Condition: used, Year of construction: 2007, color: white, overall weight: 18,000 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, rear portal doors, double-decker and keyhole plates smooth steel swap body, portal doors with external espagnolette locks,\n\n\ntypical signs of use, 1 door wing at the rear heavy rust from the outside, stops and grazing damage but tight (see also photos for condition)\nWell suited for storage purposes\n\nInternal keyhole plates and double-decker system.\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\nDouble-decker, without beams. Ledpfx Aaorn T Agjzsrk

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7,450 mm, with roller shutter, branded smooth steel wall swap body with aluminum roller shutter.\ntechnically inspected and provided with new UVV, \nroller shutter and rope repaired,\nwhile stocks last, \nnew paint finish in desired color on request\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time after consultation\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Ljdpfotyphvox Aazork

Condition: used, Year of construction: 2007, color: brown, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, NEW PAINT! Through-loading system: Rear portal doors, front and rear used smooth steel wall swap body. Through-loading system: Portal doors at the front and rear with external rotary bolt locks. Refurbishment: • NEW PAINT – high-gloss in RAL 8004 copper brown • Undercarriage sandblasted, primed and coated with black underbody protection • Support legs new, telescopic, in RAL 9005 black • New rubber seals on the doors • Body fully overhauled with new safety inspection (UVV) • New galvanized access ladder Interior fitted with keyhole system and lashing rings. All stated values are approximate dimensions in mm and kg. Delivery possible. This offer is non-binding, subject to prior sale. Prices are net, ex-location D-59558 Lippstadt-Rixbeck. Lodpfx Ajwtru Hsazsrk You can find more items at . .

Condition: used, Year of construction: 2016, color: white, overall weight: 16,000 kg, empty load weight: 3,320 kg, loading space volume: 49.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,720 mm, Swap body, smooth steel, BDF system, 7,450 mm, rear aluminum roller shutter. Used steel swap body, BDF system, 7,450 mm long. Smooth side walls, aluminum roll-up door at the rear. Semi-jumbo, parking height: 1,120 mm With repaired lock panel - different from photo Interior equipped with full-surface keyhole system + double-deck loading with 12 steel guide rails mounted both left and right. 7 pairs of locking bars fitted laterally in the rubbing rail. All stated values are approximate dimensions in mm and kg. Delivery available. Ljdpfx Aaotyph Aszjrk This offer is subject to change without notice and prior sale. Prices quoted are net ex-location D-59558 Lippstadt-Rixbeck. More items available at ...

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-wall steel swap body, BDF system, 7,450 mm long.\nConstruction here newly painted in RAL 9010 pure white or RAL color upon customer request\nAluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInner height: 2,550 mm. Loading height at the rear: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior fittings:\nKeyhole sheet metal embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scrubbing base\n(varies depending on the model, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint in one of 212 RAL colors of your choice\n(Please use our overview of all available RAL colors on our homepage)\nRoof approx. 40 cm painted all around (ATTENTION: No complete roof painting! We can gladly offer you roof painting for an additional charge.)\nBlasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new fall protection devices\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel cables on the roller door\nincl. new side and floor seals on the roller door\nincl. 7 steel sheets on the sides and on the front wall as well as new sealing seam all around,\nto prevent corrosion\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\n\nDelivery date on request.\n\nThe offer is subject to change and subject to prior sale.\nPrices net from location D-59558 Lippstadt-Rixbeck.\nYou can find more objects at pstä.\n . Lodpfx Ajt Sxkvjazsrk

Condition: used, Year of construction: 2002, color: white, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel beaded BDF system 7,450 mm, with roller shutter door, LACK NEW Body completely overhauled, completely blasted and primed,\nnewly painted in RAL 9010 white,\nfactory-new white rigid support legs (can be exchanged for telescopic ones if required) \nrear aluminium roller shutter door, new rubber seals on roller shutter door, internal height 2500 mm,\n\nInternal 3 rows of combination anchor rails\n\nDelivery date possible at short notice. Leasing possible. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Lredjub T Tpspfx Aazsk

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 48.8 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,695 mm, Swap-body platform, drop-sides with tarpaulin Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long. baked Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,950 mm. Parking height: 1,120 mm\nTotal weight: 16,000 kg. Unladen weight: 2,950 kg.\n\nSwap-body platform as storage container. \nPartial rust on parts of the swap-body platform. Usual signs of use, deformations, stops and damage. Body in RAL 3003 ruby red with neutralized lettering.\n\nImmediately available. Multiple available. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Lodpfx Aaopgty Eszork

Condition: used, color: light blue, overall weight: 16,000 kg, empty load weight: 3,250 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, PAINT NEW Used and refurbished smooth steel swap body, BDF system, 7,450 mm long.\nBody NEW PAINTED here in RAL 5015 sky blue. \nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,480 mm.\nTotal weight: 16,000 kg. Empty weight: 3,250 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step pull-out ladder\nincl. new foam rubber seals on the portal doors\nincl. 7 steel plates on the sides and front wall as well as new sealing seam all around, \nto prevent corrosion \nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Lrjdspguzpspfx Aazok

Condition: used, color: black, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth-wall swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 9005 deep black. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Ledpfx Ajpg Edfoazsrk

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 45.3 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, Swap body, steel smooth BDF system 7.45m, paint NEW standard version with 2K paint, gray or desired color used steel smooth-wall swap body, BDF system 7.45m, rear with aluminum roller shutter, refurbished \nBody NEW PAINTED in standard version - here in grey, - standard RAL colors available on request,\nUnderbody blasted and provided with underbody protection, \nNew telescopic or fixed support legs, \nBody with new sealing seam - also painted in body color,\nNew rubber seals on roller shutter\nNew current UVV\nSlight scarring from blasting may still be visible in standard version\nFor premium paint finishes, please contact us!\n\nInternal keyhole system in the side walls or lashing rails.\n\nAdditional price for wooden or plastic base plates with bracket\n\nWhile stocks last or delivery time on request if not directly available. \n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n\n\n . Lrsdoqdai Hjpfx Aazok

Condition: used, Year of construction: 2009, color: blue, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 46.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, LACK NEW, Premium plus! used steel swap body, BDF system 7,450 mm long. \nSmooth side walls, portal doors at the rear with external espagnolette locks.\nInside keyhole system\n\nFinished in PREMIUM PLUS version: \n\n- Premium 2 K paint finish - high-gloss, here in RAL 5005 signal blue or RAL color as requested\n- Underbody blasted, primed and repainted in body color\n- New roller shutter cables\n- New rubber seals\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom, full length \n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request.\nDelivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Lredpouwtbnsfx Aazok

Condition: used, color: green, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, LACK NEW! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nIncluding SIDE DOOR (1.15 x 2.0 m)\n\nBody repainted here in RAL 6011 Reseda green. Other RAL colors available on request.\n\nAluminum roller shutter at the rear.\nIncl. brand new support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nInterior fittings:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel ropes on the roller shutter door\nincl. new side and bottom seals on the roller shutter door\n\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Lsdpet E T Nmsfx Aazsrk

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, empty load weight: 3,100 kg, loading space volume: 18.8 m³, loading space width: 2,480 mm, loading space length: 2,750 mm, loading space height: 2,750 mm, Swap body, smooth steel BDF system 7,450 mm, smooth-walled steel body, \n\nwith new UVV\n\nInternal keyhole plates and scuff plate all round.\n\n\nAll values stated are approximate dimensions in mm and kg.\n\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n . Lrjdouuk Ixjpfx Aazek