Swap body with box body

Krone 7,82 BDF Jumbo Glattwandwechselbrücke

Condition: refurbished (used), functionality: fully functional, 7.82 BDF Krone smooth wall swap body, used (several available) The swap body including the roof is painted on the outside in the customer's color. Common RAL color The substructure and parts of the support feet are not painted, this is not visible after setting it down on the ground. Parking height 1120 mm The swap body is waterproof and the roller door is standard. External dimensions in mm approx: Length 7820 Width 2550 Height 2925 Inner dimensions in mm approx: Length 7700 Width 2480 Height 2700 Door openings in mm: Width 2370 Height 2600 Lashing: keyhole For registration/operation maximum permissible. Total weight: 16,000 kg KLV-capable, including rail coding according to DIN EN 13044 Rail approval Code XL (for rail transport over 120 km/h) Floor frame 195 mm high floor assembly including floor; rectangular tube longitudinal beams with cross beams and outer frame as a welded construction with guide tunnel underneath 4 container corner fittings on a 20' base, symmetrical overhangs 4 gripper bars Blsdevv R Ifopfx Agbsp 7 pairs of lashing rings on the side in the rub rail Floor Type: BO WST 27 mm thick, waterproof glued screen-printed panel floor, strength according to DIN EN 283; for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front in the floor (according to GGVS) Case housing Structure TYPE AB WST Inner height: 2700 mm Portal height i. L. 2525 mm Total height: 2,925 mm Corner height: 2,900 mm Closed structure Smooth side walls made of galvanized sheet steel cassettes Roof made of trapezoidal profiled sheet steel, construction height: 25 mm 2 ventilation gills per side wall # Rubbing strip and side wall with recesses Forklift collision protection inside, 3-sided, approx. 300 mm high Smooth front wall made of galvanized sheet steel cassettes Inside front wall with 21 mm screen-printed panel, 750 mm high, above it a continuous 12 mm screen-printed panel Outside front wall at the top with offset (optimized for cornering) Rear wall as roller door (width in length 2370 mm), with DB approval Train Plus, rollers can be replaced Flat steel collision protection for roller door guide rail Inside side walls completely covered with keyhole plates 13 steel guide rails each set into the left and right to accommodate double-decker loading beams 13 LM loading beams for double-decker loading Steel impact protection horizontally on the rear profile, left and right Please note: Actual dimensions and other specific details may differ slightly from the above information due to continual product improvement.

Condition: not inspected (used), functionality: unexamined, color: white, 7.82 BDF Krone smooth-sided swap body with portal doors, used (multiple available) Parking height 1120 mm The swap body is waterproof External dimensions in mm approx.: Length 7820 Width 2550 Height 2925 Interior dimensions in mm approx.: Length 7700 Width 2480 Height 2700 Lashing: Keyhole 4 container corner fittings on a 20' base, symmetrical overhangs 4 grab rails Floor Type: BO WST 27 mm thick, waterproof, glued plywood floor, strength according to DIN EN 283; For floor loads up to 5,460 kg forklift axle load Box body Interior height approx.: 2,700 mm Total height approx.: 2,925 mm Corner height approx.: 2,900 mm Enclosed structure Blodpowbgrpofx Agbop Smooth side walls made of galvanized sheet steel cassettes Roof made of trapezoidal profiled sheet steel, overall height: 25 mm 2 ventilation gills per side wall # Rubbing strip and side wall with recesses Forklift collision protection inside, 3-sided, approx. 300 mm high Smooth end wall made of galvanized sheet steel cassettes Interior end wall with 21 mm plywood panel, 750 mm high, with a continuous 12 mm plywood panel above it Exterior end wall with offset at the top (optimized for cornering) Interior side walls fully covered with keyhole plates 13 steel guide rails recessed on the left and right for Double-deck loading beam Light-weight loading beam for double-deck loading Steel collision protection horizontally mounted on the left and right rear profile. Please note: Actual dimensions and other specific details may vary slightly from the above specifications due to continuous product improvement.