Used Semitrailers With Swap Body for sale (531)

Condition: new, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 12,360 mm, total width: 2,550 mm, total height: 1,800 mm, Year of construction: 2021, Equipment: ABS, Swap body semi-trailer for 40?, 2x 20?, 1x 30?, 1x 40?HC containers * Lift axle * Rear pneumatically extendable by 1360 mm * SAF axles with disc brakes * Jost supports * Wabco Trailer EBS-E, ABS * Haldex Colas air system * Wheel chocks ----Vehicle number 6915 -----Subject to errors and prior sale Gkedpfjkbvvijx Aaxsd

Condition: used, maximum load weight: 39,000 kg, first registration: 04/1994, Heating container: Temperature range adjustable up to 80°C. Floor: Aluminum T-Floor Gedpfoupcgpex Aaxskd Interior walls and ceilings: Stainless steel

Condition: used, axle configuration: 2 axles, first registration: 06/2019, next inspection (TÜV): 06/2024, Equipment: ABS, Leaf spring drum brakes galvanized good condition 15x available Gkedpfxjvvfwuo Aaxed Price 9900 Write to us with your requirements so that we can create an individual offer for you If not in stock, delivery time 7 to 9 weeks We sell tires and rims for trucks & trailers of brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailers Tarpaulin trailers Sillo trailers

Condition: new, maximum load weight: 18,800 kg, overall weight: 22,000 kg, Year of construction: 2025, RSM Roll-Off Container 38m³ with Hydraulic Tailgate and Grain Pusher * Type ECO-2 * Year of Manufacture 2025 * Volume 38m³ * Dead weight 3,200 kg * Payload 18,800 kg * Load capacity 22,000 kg * Hydraulic volume tailgate * Grain pusher * All-round net hooks The RSM universal container, the all-rounder for all requirements, complies with the standards of DIN 30722 Part 2 and is an ECO Type 2 with a permissible total weight of 22,000 kg. Gedpfx Aswggn Uoaxskd We are happy to provide you with further information.

Condition: used, axle configuration: 3 axles, first registration: 01/1987, Year of construction: 1987, KLAUS SAC 30 KM 298 - SIDE LOADER - SIDELOADER Gksdpfx Aoi Ryvroaxjd Year of construction: 1987 * Lifting capacity max. 30500 kg * Sideloader left/ right side * 20/40 feet * Top spreader * Tilt protection * BPW axles * 2 axles with forced steering * Tires approx. 80% * Sale without remote control Honest, functional side loader in good condition. On request and for an extra charge UVV crane inspection and main inspection new. Remote control and other spare parts in stock.

Condition: used, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 12/2007, Equipment: ABS, Vehicle identification number: WK0S0002400103969 Own weight: 5,550 kg Gkodjqtmvfjpfx Aaxjd DE HU due Kögel-Trax axles with disc brakes LIFT AXLE Mounting: 2 x 20", 1 x 30", 1 x 40", 1 x HighCube Tires: 385/55 R 22.5 Spare wheel holder WITHOUT spare wheel Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description in the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply.

Condition: used, empty load weight: 3,600 kg, maximum load weight: 24,900 kg, overall weight: 28,500 kg, axle configuration: 2 axles, first registration: 10/1979, total length: 2,500 mm, total width: 1,500 mm, suspension: steel, tire size: 16,5R22,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, air-sprung, lifting+lowering, supports Gkodpfx Aji Rnzpjaxod Body: for 20-foot container drum brakes, 2x 10t BPW axles ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2021, total width: 2,435 mm, total height: 1,345 mm, Equipment: ABS, For vehicle inquiries, please contact Mr. Seidel (tel. +49 1 81 20 80). ----Krone SD Semi-Trailer BDF Swap Body for Containers ---- * Air Suspension * BPW Axles * Disc Brakes * Spring Brakes * Wabco ABS * Wabco Air Suspension Control Box * Liftable Center Axle Maneuvering Aid * Additional Headlights: Front, Center, Rear * Gross Vehicle Weight: 39,000 kg * Unladen Weight: 5,010 kg * Payload: 33,990 kg * Tire Tread: 1st Axle 7-9 mm, 2nd Axle 12 mm, 3rd Axle 7-14 mm Godpfowipdkex Aaxekd We can provide you with a leasing or financing offer upon request. Mr. Seidel (tel. +49 1 81 20 80). Further information can be found on our website. !!! Errors, changes, and prior sale reserved!!!

Condition: used, axle configuration: 3 axles, first registration: 06/2019, Equipment: ABS, 15 units available, galvanized SAF axles 2 lifting axles 1x20 rear flush 2x20 1x30 rear flush 1x40 rear flush 1x45 rear flush Gsdpfx Asvvfwbeaxokd ADR Water tank Tool box LED lights

Condition: used, maximum load weight: 26,380 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2009, Equipment: ABS, Krampe 3-axle roll-off trailer SHL 30 BPW axles 1st axle liftable Air suspension Tires 385/55 R 22.5 Jost outriggers Reverse light Roll-off trailer with hydraulic articulated boom Gjdjv R N R Iopfx Aaxjkd Container length 7.00 to 7.50 m Roll height 1.40 - 1.45 m Mechanical operation Traction capacity approx. 30 t, ground level Further information upon request

Condition: used, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 01/2021, Equipment: ABS, * GENMARK generator set 1,400 h * Reliable chassis for all container types (20 ft to 45 ft) * Standard tank position * Very simple and easy operation thanks to 'Easy select system'. Driver only has to get out of the truck once. * Wear-free sliding system Gksdjry Nh Repfx Aaxjd * 3 x 9 t SAF axles * 5.7 t tare weight * Lift axle * Tires approx. 60% Thanks to the "Easy select system", the driver only has to get out of the truck once to set the correct container position. Once set, the chassis can simply be moved in and out by driving the tractor unit forwards and backwards. RENTAL POSSIBLE

Condition: used, maximum load weight: 30,160 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 12/1983, Year of construction: 1983, 2-axle Doll container chassis for 20" containers TYPE: P 20 VIN: D04001 Chassis / Attachments: * Air suspension * 2 x BPW with drum brakes * Tires: 385/55R22.5 Gsdpfx Aevziwvoaxekd * Remaining tread: Front ~80% // Rear ~70% * Jost jack stands Body: * Container chassis for 20" containers Weights: * Gross vehicle weight: 33,000 kg * Unladen weight: 2,840 kg * Payload: 30,160 kg Other: * German vehicle * 1 previous owner * SP New general inspections / safety inspections or weight reductions/increases are available upon request. We are happy to assist you in obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale, and errors excepted! ---- Who are we? Leible Commercial Vehicles is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Commercial Vehicles' particular strength lies in the distribution of new and used commercial vehicles. We offer a wide variety of vehicles on our 11,000 square meter site. Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates/short-term license plates. Handling customs formalities We are happy to help you handle customs matters.

Condition: used, empty load weight: 5,400 kg, maximum load weight: 29,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2002, total length: 2,550 mm, total width: 1,300 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, Kässbohrer axles, air suspension, ABS (anti-lock braking system), aluminum side guards Body: 20, 40 feet Vehicle was assembled from old and new parts! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Gedpji Rn Hiofx Aaxjkd

Condition: used, maximum load weight: 34,760 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, Equipment: ABS, Warranty extension * on the KRONE axle: 6 years with no mileage limit for on-road use within the EU, load-dependent, fully automatic, electronic lift axle control for 1st axle, manual function Krone axles 9t, 6-year warranty on Krone axles with no mileage limit, LED side marker lights with flashing function, Hella LED tail lights, ADR warning sign, B 028.001 Two mechanical support winches, 2 x 12 tonnes, semi-circular with base plate, make: Jost B 001.000 Support winches operated on one side, in FR-right, multi-function tail lights (full LED), make Hella (Gen.2) Krone warranty: 10 years g. Rust-free underrun protection, extendable, 1 x 40`container with tunnel, 1 x 45`container with tunnel, 2 x 20`containers, 1 x 20`container flush with the rear, 1 x 20`container in the middle, NOT for tank containers, lifting axle A 420.000 Container locks for holding the following containers: A 420.101 1 x 40' container with tunnel A 420.152 1 x 45' container with tunnel A 420.110 2 x 20' containers A 420.140 1 x 20' container flush with the rear A 420.120 1 x 20' container in the middle Color group 1. Color group vehicles: 2 vehicles X 998.107 Chassis RAL 9005 DEEP BLACK X 998.130 Axles incl. Wheel hubs RAL 9005 DEEP BLACK X 998.242 Underrun protection/lighting bracket WHITE POWDER COATED X 998.890 Attachments BLACK OR GALVANIZED X 998.212 Rims SILVER NATURAL X 998.272 Side impact protection WHITE POWDER COATED X 998.831 Landing gear RAL 9005 DEEP BLACK Gjdjnubgyopfx Aaxekd

Condition: used, axle configuration: 3 axles, first registration: 04/2002, Multiple available, 30 pieces, different years of manufacture and manufacturers Prices from 2100¤ We have 20-foot, 3 and 2 axle 40-foot, different years of manufacture Gksdpfxjvm I N Uo Aaxed 3x leaf-sprung All together bulk purchase special price

Condition: new, loading space length: 5,300 mm, loading space width: 2,430 mm, Year of construction: 2025, Brand new roll-off container with FASSI loading crane Roll-off container in flatbed design with aluminum side walls and permanently mounted Fassi loading crane FASSI loading crane F135AC.0.24: * 390° slewing range * All hydraulic cylinders double-acting * Hard-chrome-plated piston rods * Electronic overload cut-off device with FX500 * Emergency stop and visual alarm (90% and 100%) * Including adjustable digital slew limiter * FASSI FSC stability control including LMB II * Pressure relief and load-holding valves * Control block with 4 control valves, operable from both sides * 5th and 6th control circuits * Oil cooler type 60/24 * Extendable on both sides, support width 4.37 m, hydraulic support * Standard color RAL 3020 traffic red - all cylinders painted black * Load hooks and mounting clamps (short / 500mm) * Driving position: folded across the direction of travel * Dead center above the outrigger beam * Joystick control for 6 functions * 1 LED work light * Outriggers can be operated remotely * 180° hydraulic Elevating support legs Roll-off container/crane container Transport platform Gkjdpfx Aewikytjaxsd Total length 6500 mm - According to DIN 30722 Part 1 - Internal dimensions 5300 mm (5300 mm x 2450 mm) - Crane plate 1200 x 1200 x 25 mm S355 - Pre-installed hook holder Ø50 mm - 5 mm smooth floor - U-shaped frames 80 x 50 x 4 mm, 500 mm spacing - UNP-180 end frame - Perforated side profile - Greaseable and replaceable run-off rollers, axles Ø40 mm - 25 mm aluminum side walls on the sides and rear SNAPLOCK system (height 800 mm), split in the middle - WITHOUT tarpaulin hooks - KINNEGRIP K20 stanchions (foldable/removable in the middle and rear) - Front wall height 1200mm - Primed inside and out - Exterior paint in any RAL color (stock item in RAL 9006 Silver) - Anodized aluminum profiles - Initial container inspection according to BGI 5005 Mechanical and hydraulic connections to the truck will be carried out upon request! Additional charge! We are happy to provide further information.

Condition: used, maximum load weight: 34,070 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 08/2015, next inspection (TÜV): 08/2025, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Kögel container semi-trailer container chassis S24-2 extendable 40" ### Chassis with pneumatically extendable rear ### ----* Container intake: 1x 20 ft centered, 1x 20 ft flush with rear, 2x 20 ft, 1x 30 ft or 1x 40 ft ---- Permissible total weight: 39,500 kg, Unladen weight: 5,430 kg, Payload: 34,070 kg, Distance between TwistLock locks from rear to front: 2,630 / 5,850 / (TWIST-LOCK MISSING 6,350) / 7,230 / 8,500 / 8,930 / 12,220 mm, SAF axles, Gkjdpfxjwrkigo Aaxed Lift axle 1st axle, Air suspension, Disc brakes, Underrun protection right, left and rear, 2x crank support operable from the right, Spare wheel holder, EBS, ABS, Haldex brake system, Wheelbase: approx. 6,435 x 1,410 x 1,310 mm, External dimensions retracted LxW: approx. 11,450 x 2,550 mm, External dimensions extended LxW: approx. 12,820 x 2,550 mm, Fifth wheel coupling height: approx. 1,220 mm, Loading height lowered: approx. 1,080 mm, Unladen loading height above axles center: approx. 1,165 mm, Loaded loading height above axles center: approx. 1,135 mm, Neck frame height: approx. 130 mm, Tires: 385/55R22.5, Tire tread depth left front: 12 mm, Tire tread depth left middle: 11 mm, Tire tread depth left rear: 10 mm, Tire tread depth right front: 13 mm, Tire tread depth right middle: 11 mm, Tire tread depth right rear: 13 mm, Foldable TWIST-LOCK receptacle at position 6,350 mm missing, Locking the 20 ft container at the front not possible, as both TWIST-LOCKs are missing!! Crank support only extends on the right side. (Rod connection to left crank support has too much play) Further equipment: Suitable for transporting the following container types according to ISO 668/1496: 40" High Cube, 20" ISO, 30" ISO, Front overhang: approx. 1,410 mm, Front overhang radius: approx. 1,650 mm, Rear swing radius: approx. 2,160 mm, Construction height above fifth wheel: approx. 130 mm, Fifth wheel coupling height loaded possible according to ISO 1726: approx. 1,120 - 1,270 mm, Braking system according to ECE-R13, Electrical system according to ECE-R48, Chassis frame made of high-quality steel, but without an outer frame, Coupling plate with a 2" kingpin, With cross member and container locks to accommodate: a) 1 x 40" High-Cube Container (frame extended), b) 2x 20" ISO Container (frame extended), c) 1x 30§ ISO Container flush with the rear (frame extended), d) 1x 20" ISO Container flush with the rear (frame retracted), e) 1x 20" ISO Container centered (frame retracted), 4 pairs of heavy-duty lashing rings, Rear frame extension, extendable by approx. 1,370 mm, load capacity: 5,800 kg, with spiral cable, Length adjustable by 1 pneumatic cylinder, Low-maintenance guidance on special plastic slide bearings and 2 extension rollers, Automatic pneumatic locking of the extension, Axle lift for 1st axle, control fully automatic, axle load dependent, With switchable lowering of the lift axle in every load area, Additionally, electrically switchable lowering from the driver’s cab (switch required in the cab!), operation at the chassis still possible, With traction aid, functional up to an axle load excess of 30% and a speed up to 25 km/h, Three-axle SAF INTRADISC plus INTEGRAL assembly, with 430 mm disc brakes, ET 120, Air suspension with 180 mm stroke, Mechanical trailer supports with compensating foot, 24t lifting capacity, One side operation to the right in travel direction, Spray protection system (spray suppression) according to Regulation (EU) No. 109/2011 for standard three-axle

Condition: used, maximum load weight: 31,600 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 02/2003, Year of construction: 2003, Equipment: ABS, 2-axle Doll container chassis for 20" containers TYPE: P 20 VIN: D04029 Chassis / Attachments: * Air suspension Gedpfx Aajvx D Tmexekd * 2 x BPW with drum brakes * Tires: 425/65R22.5 * Remaining tread: ~30-60% * Jost supports Superstructure: * Container chassis for 20" containers Weights: * Gross weight: 35,000 kg * Unladen weight: 3,400 kg * Payload: 31,600 kg Other: * German vehicle * 1 previous owner * Inspection due: 11/2025 ---- New general inspections / safety inspections or weight reductions/increases are possible on request. We are happy to assist you with obtaining export/transfer license plates, and the transfer of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing & typing errors, changes, prior sale and mistakes excepted!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 sqm. Our company philosophy is characterized by fairness and reliability. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who supports them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export/short-term license plates. Handling customs formalities We are happy to assist you with customs processes.

Condition: used, empty load weight: 4,160 kg, maximum load weight: 34,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2008, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Location: Bovenden, 3 axles, BPW axles, air suspension, ABS (anti-lock braking system), underrun protection, front support legs, side aluminium side protection, landing gears. Superstructure: 3-axle container chassis for ISO and tank containers 20ft/30ft with ADR, 3x 9t BPW axles, drum brakes! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Gksdpowt Dr Rsfx Aaxsd

Condition: used, maximum load weight: 34,760 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, Warranty extension * on the KRONE axle: 6 years with no mileage limit for on-road use within the EU, load-dependent, fully automatic, electronic lift axle control for 1st axle, manual function Krone axles 9t, 6-year warranty on Krone axles with no mileage limit, LED side marker lights with flashing function, Hella LED tail lights, ADR warning sign, B 028.001 Two mechanical support winches, 2 x 12 tonnes, semi-circular with base plate, make: Jost B 001.000 Support winches operated on one side, in FR-right, multi-function tail lights (full LED), make Hella (Gen.2) Krone warranty: 10 years g. Rust-free underrun protection, extendable, 1 x 40`container with tunnel, 1 x 45`container with tunnel, 2 x 20`containers, 1 x 20`container flush with the rear, 1 x 20`container in the middle, NOT for tank containers, lifting axle A 420.000 Container locks for holding the following containers: A 420.101 1 x 40' container with tunnel A 420.152 1 x 45' container with tunnel A 420.110 2 x 20' containers A 420.140 1 x 20' container flush with the rear A 420.120 1 x 20' container in the middle Color group 1. Color group vehicles: 2 vehicles X 998.107 Chassis RAL 9005 DEEP BLACK X 998.130 Axles incl. Wheel hubs RAL 9005 DEEP BLACK X 998.242 Underrun protection/lighting bracket WHITE POWDER COATED X 998.890 Attachments BLACK OR GALVANIZED X 998.212 Rims SILVER NATURAL X 998.272 Side impact protection WHITE POWDER COATED X 998.831 Landing gear RAL 9005 DEEP BLACK Gedpfx Aaonudhmexjkd

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2019, Year of construction: 2019, Equipment: ABS, 2x lift axles 1x20 rear flush 2x20 1x40 1x45 Water tank tool box LED lights Write to us with your requirements so that we can create an individual offer for you We sell tires and rims for trucks & trailers of the Brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 If not in stock, delivery time 6 to 9 weeks We build the following trailers Container chassis all types Low loader Gedpfx Aasv Afrxjxskd Tipping troughs Tank trailers Tarpaulin trailers Sillo trailers

Condition: new, maximum load weight: 12,200 kg, overall weight: 15,000 kg, loading space length: 7,005 mm, loading space width: 2,300 mm, loading space height: 2,200 mm, loading space volume: 37 m³, total width: 2,450 mm, total height: 2,450 mm, Year of construction: 2025, Brand new roll-off container for building rubble, waste etc. * Steel container in lightweight design * 50 mm support bracket * Rear doors with safety lock * Steel floor 5 mm * Right-sided access at the front * Tarpaulin holders on all sides * Capacity 37 cbm Gsdpfx Aasmxgi Hsxskd * Tare weight approx. 2,800 kg * Initial container inspection according to BGI 5005 Further containers in heavy-duty design DIN 30722 part with 60 mm support bracket in stock. For further information please do not hesitate to contact us

Condition: used, maximum load weight: 34,200 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 08/2025, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, Kögel Container Semi-Trailer Container Chassis S24-2 extendable 40" ### Chassis with pneumatically extendable rear ### ----* Container mount: 1x 20-foot center, 1x 20-foot rear flush, 2x 20-foot, 1x 30-foot or 1x 40-foot ---- All air bellows have been replaced Both crank supports have been replaced Permissible total weight: 39,500 kg, Empty weight: 5,300 kg, Payload: 34,200 kg, Distances TwistLock fasteners from back to front: 2,630 / 5,850 / 6,350 / 7,230 / 8,500 / 8,930 / 12,220 mm, SAF axles, Lift axle 1st axle, Air suspension, Disc brakes, Underrun protection right, left, and rear, 2x crank support operable from right, Spare wheel holder, EBS, ABS, Haldex brake system, Gkodpfx Aswrkitjaxod Wheelbase: approx. 6,435 x 1,410 x 1,310 mm, External dimensions retracted LxW: approx. 11,450 x 2,550 mm, External dimensions extended LxW: approx. 12,820 x 2,550 mm, Fifth wheel height: approx. 1,220 mm, Loading height lowered: approx. 1,080 mm, Unladen loading height over center of axle assembly: approx. 1,165 mm, Laden loading height over center of axle assembly: approx. 1,135 mm, Frame neck height: approx. 130 mm, Tires: 385/55R22.5, Tread depth tires left front: 9 mm, Tread depth tires left middle: 13 mm, Tread depth tires left rear: 12 mm, Tread depth tires right front: 10 mm, Tread depth tires right middle: 11 mm, Tread depth tires right rear: 10 mm, Additional equipment: Suitable for transport of the following container types according to ISO 668/1496: 40" High Cube, 20" ISO, 30" ISO, Front overhang: approx. 1,410 mm, Front overhang radius: approx. 1,650 mm, Rear swing radius: approx. 2,160 mm, Build height over fifth wheel coupling: approx. 130 mm, Fifth wheel coupling height loaded possible according to ISO 1726: approx. 1,120 - 1,270 mm, Brake system according to ECE-R13, Electrical system according to ECE-R48, Chassis frame made of high-quality steel, but without external frame, Coupling plate with a 2" fifth wheel kingpin, With cross member and container locks for accommodating: a) 1 x 40" high-cube container (frame extended), b) 2x 20" ISO containers (frame extended), c) 1x 30" ISO container rear flush (frame extended), d) 1x 20" ISO container rear flush (frame retracted), e) 1x 20" ISO container centered (frame retracted), 4 pairs of heavy duty lashing rings, Rear frame extension, extendable by approx. 1,370 mm, load capacity: 5,800 kg, with spiral cable, Length adjustable via 1 pneumatic cylinder, Low-maintenance guide on special plastic sliders and 2 extension rollers, Automatic pneumatic locking of the extension, Axle lift for 1st axle, fully automatic control, axle-load dependent, with switchable lowering of the lift axle in every load range, Additionally electrically switchable lowering from the driver's cab (switch in the cab required!), operation on the chassis still possible, with starting aid, functional up to an axle load exceedance of 30% and a speed up to 25 km/h, Three-axle unit SAF INTRADISC plus INTEGRAL, with 430 mm disc brakes, ET 120, Air suspension with 180 mm lift, Mechanical landing gears with compensating foot, 24ton lifting capacity, One-side operation in driving direction right, Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for standard three-axle unit consisting of: 3 pairs of semicircular fenders with anti-spray system, 2 chocks with holder, Side guard according to ECE-R73, Tool-free foldable side guard in driving direction right, Underrun protection made

Condition: used, first registration: 02/2023, We manufacture your containers as required. Gkodpfxetq Nx Ne Aaxed Building site containers storage containers material containers storage containers. Manufactured in Germany.

Condition: used, maximum load weight: 34,200 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 07/2025, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, Kögel Container Semi-Trailer Container Chassis S24-2 extendable 40" ### Chassis with pneumatically extendable rear ### ----* Container loading: 1x 20 foot centered, 1x 20 foot flush with the rear, 2x 20 foot, 1x 30 foot or 1x 40 foot ---- Permissible total weight: 39,500 kg, Curb weight: 5,300 kg, Payload: 34,200 kg, Distances between TwistLock locks from rear to front: 2,630 / 5,850 / 6,350 / 7,230 / 8,500 / 8,930 / 12,220 mm, SAF axles, Lifting axle on the 1st axle, Air suspension, Disc brakes, Underride protection right, left and rear, 2x crank supports operable from the right, Spare wheel holder, EBS, ABS, Haldex braking system, Wheelbase: approx. 6,435 x 1,410 x 1,310 mm, External dimensions retracted LxW: approx. 11,450 x 2,550 mm, External dimensions extended LxW: approx. 12,820 x 2,550 mm, Saddle height: approx. 1,220 mm, Loading height lowered: approx. 1,080 mm, Unloaded loading height above center of axle assembly: approx. 1,165 mm, Loaded loading height above center of axle assembly: approx. 1,135 mm, Neck height of frame: approx. 130 mm, Tires: 385/55R22.5, Tread depth left front: 12 mm, Tread depth left middle: 11 mm, Tread depth left rear: 8 mm, Tread depth right front: 10 mm, Tread depth right middle: 11 mm, Tread depth right rear: 12 mm, Further equipment: Suitable for transporting the following container types according to ISO 668/1496: 40" High Cube, 20" ISO, 30" ISO, Front overhang: approx. 1,410 mm, Front overhang radius: approx. 1,650 mm, Rear swing radius: approx. 2,160 mm, Build height above fifth wheel: approx. 130 mm, Possible loaded fifth wheel height according to ISO 1726: approx. 1,120 - 1,270 mm, Brake system according to ECE-R13, Electrical system according to ECE-R48, Chassis frame made of high-quality steel, but without an outer frame, Coupling plate with a 2" kingpin, With cross member and container locks for the following: a) 1 x 40" High-Cube container (frame extended), b) 2x 20" ISO container (frame extended), c) 1x 30" ISO container flush with the rear (frame extended), d) 1x 20" ISO container flush with the rear (frame retracted, e) 1x 20" ISO container centered (frame retracted), 4 pairs of heavy-duty lashing rings, Rear frame extension, extendable by approx. 1,370 mm, capacity: 5,800 kg, with spiral cable, Gjdpfxowrkiao Aaxjkd Length adjustable via 1 pneumatic cylinder, Low-maintenance guidance on special plastic sliders and 2 extension rollers, Automatic pneumatic locking of the extension, Axle lift for 1st axle, control fully automatic, depending on axle load, with switchable lowering of the lifting axle in any load range, Additionally electrically switchable lowering from the cab (switch in cab required!), operation on chassis still possible, with drive-off aid, operational up to an axle load excess of 30% and speed up to 25 km/h, Three-axle unit SAF INTRADISC plus INTEGRAL, with 430 mm disc brakes, ET 120, Air suspension with 180 mm stroke, Fifth wheel supports mechanically with compensation foot, 24t lifting capacity, One-side operation on the right in driving direction, Splash guard system (spray suppression) according to Regulation (EU) No. 109/2011 for standard three-axle unit consisting of: 3 pairs of semi-circular mudguards with anti-spray system, 2 wheel chocks with holder, Side guard as per ECE-R73, Tool-less foldable side guard on the right in driving direction, Underride protection made of square steel pipe according to ECE-R58 with a protected light carrier above it, EB