Used Potato Harvesters for sale (46)

Condition: used, Year of construction: 2008, Axle steering Onboard hydraulics Dam pressure control Dam center alignment Dike cell steering Independent hydraulic system Electro-hydraulic control Coarse debris band Leveling adjustment Stone/clod separation device Picking table Tires (front): 2x 500/60-22.5, Tires (rear): 2x 500/60-22.5, Area performance: 180 hectares, Onboard computer/monitor, Onboard hydraulics, Hydrostatic drive, Operator terminal, Leveling adjustment, Stone protection, Picking table, Dam center alignment, K80 = Further information = Guedpfx Ahez Nrvlj Hoh General condition: good Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: used, Year of construction: 2007, operating hours: 4,604 h, Equipment: compressed air brake, SE 150-60 NBR 0010 Used Grimme Potato Harvester 150-60 NBR 0030 Chassis No.: 41601718 0040 Year of manufacture: 2007 0060 Hydraulic axle steering 0070 Automatic axle centering 0080 Hydrostatic wheel drive 0090 Air brake 0100 Automatic ridge centering 0110 K 80 lower hitch 0120 Tyres 700/50-30.5 0130 Automatic slope compensation 0140 Central share unit 0150 Automatic ridge pressure reduction 0160 2nd disc coulter right Godoyyrkuopfx Ah Heuh 0170 V2A steel plates in oscillating frame 0180 Shaker on 1st sieving web hydraulically adjustable 0190 1st sieving web with 40 mm pitch 0200 2nd sieving web with 35 mm pitch 0210 Haulm separation shaft under GKB 0220 hydraulically driven 0230 Hydraulic adjustment for stripper combs 0240 Slip monitoring 2nd sieving web 0250 Slip monitoring 1st separator 0260 Electronic speed adjustment 1st and 0270 2nd separator 0280 Drive with 3-speed gearbox 0290 Drive 1000 rpm 0300 2nd platform with feed chute and 0310 cross discharge conveyor 0320 Automatic for pre-elevator 0330 Stone box with discharge belt 0340 3rd hedgehog belt with double smooth rollers 0350 Scraper for type NB 0360 Hedgehog belt for 3rd separator TLG-40 mm 0370 Roll-floor bunker extension 0380 Lowerable bunker head 0390 Operator terminal GBT 2100 0400 1st haulm belt with TLG 40 mm 0410 2nd haulm belt with TLG 40 mm 0420 2nd haulm belt with elevated hedgehog rods 0430 Row width 75 cm 0440 Intake 580 mm 0450 Ridge drum 390 0460 3-tine share 0470 Outer haulm intake rollers 0480 Coarse haulm belt 1644-327-40 spacing 280 mm

Condition: used, Year of construction: 2004, Bunker Hectare (ha): 150 Platform Sorting For sale is a Grimme SE 150-60 potato harvester, manufactured in 2004, in good condition. The machine has been inspected and is fully operational for the upcoming harvest. It has been regularly maintained and functions perfectly. Details: * Grimme SE 150-60 * Year of manufacture: 2004 Gjdpfsz I E Drex Ah Hsuh * Good condition * Inspected and ready for service * Immediately ready for harvest * 6-ton bunker * Intake: 2 x 75 cm * Includes onion harvester attachment * Drive axle * Camera system * Separator * Sorting table Inspection can be arranged at any time. Please feel free to contact us if you are interested or have any questions.

Condition: used, Year of construction: 2006, Bunker Hectare (ha): 200 Platform Sorting For sale is a WM 4500 potato harvester, manufactured in 2006, with extensive special equipment. Equipment: + Electromagnetic control + Drive via PTO shaft + Hydraulic drawbar control + Air pressure brake + Lighting and TÜV approval for 40 km/h + Ridge following + Two-blade share with angle adjustment + Large, sprung crop intake rollers Ø 400 mm + Sieve chain + Mechanically adjustable vibrator + Wide-mesh crop band with intake belt + 4 tool-free adjustable crop retainers + Pre-separation with V-shaped separator band and hydraulically driven double discharge roller + Sorting belt 750 mm Gjdpfez I E Epox Ah Hsuh + Addition belt + Bunker with parallel discharge and soft padding + Bunker capacity approx. 4.3 t + Discharge height approx. 4.15 m + Hydraulic axle steering + Additional control unit as a multi-function handle + 3-stage gearbox + LS self-contained hydraulic system and 2nd separation belt hydraulically driven + Additional 2 rows of crop retainers + Automatic lateral guidance via ridge drum + Bunker filling slide + Automatic axle return + Main sieve chain, pitch 36 mm + Bunker filling belt driven from the tractor + Discharge device for filling crates + Main sieve chain – every 2nd rod crimped + 1 transfer roller + 3 sorting rollers, one of which is centrally adjustable, including container for sorted-out potatoes + UFK hydraulically adjustable instead of discharge rollers + Tires 500/60-22.5 + Hydraulic front-end relief

Condition: used, Year of construction: 2006, Grimme Roder SE 150-60 NB 0010 Used Grimme SE 150-60 NB potato harvester 0020 K80, lower hitch, 1000 rpm PTO shaft 0030 Air brake, row following system, axle steering 0040 Axle centering, automatic tilt compensation Guedpsz H S Nfefx Ah Hjh 0050 Tires 800/45 R 30.5 Vredestein 0060 40 km/h, load-sensing, camera system 0070 Work lights, lighting, warning signs 0080 D-centering, number of rows 2, row spacing 75 0090 Split share, additional separating disc 0100 Electric agitator, separating device, slip monitoring 0110 Picking table (adjustable height), stone separator, bunker harvester 6 t. 0120 Bunker filling optimization, adjustable bunker head

Condition: used, Year of construction: 2006, operating hours: 3,579 h, working width: 1,500 mm, SE 150-60 NB (0010) Used Grimme SE 150-60 NB potato harvester (0020) Hydraulic axle steering (0030) Automatic axle centering Godez H Sxyopfx Ah Heuh (0040) Tires 800/45x30.5 Trelleborg (0050) Automatic ridge centering (0060) Automatic slope compensation (0070) Center share adjustment (0080) 2nd separating disc on the right (0090) Stainless steel sheet metal in the oscillating frame (0100) Beater in the 1st separating belt, hydraulically adjustable (0110) 1st separating belt with 40mm spacing (0120) 2nd separating belt with 35mm spacing (0130) Hydraulically driven haulm removal shaft (0140) Hydraulic adjustment of the haulm removal combs (0150) Slip monitoring for the 2nd separating belt (0160) Slip monitoring for the 1st separating unit (0170) Electric speed adjustment for 1st and 2nd separating units (0180) Drive: 1000 rpm (0190) Automatic pre-selection elevator (0200) Automatic filling optimization (0210) Roller bed hopper extension (0220) Operator terminal GBT 2100 (0230) 2 haulm belts with increased hedgehog rods

Condition: used, Year of construction: 2015, working width: 1,500 mm, Equipment: onboard computer, Grimme SE 150-60 NBR (0010) Used Grimme potato harvester 150 - 60 SE (0020) Separately adjustable center share (0030) Depth adjustment from the terminal (0040) Automatic ridge unloading (0050) Automatic ridge centering Gjdpfx Aoyp Uq Ish Houh (0060) 1st separating conveyor with 40mm spacing (0070) Stainless steel sheet in the oscillating frame (0080) Beaters in the 1st separating conveyor (0090) 2nd separating conveyor with 35mm spacing (0100) Adjustment of separating combs from the terminal (0110) Hydraulic haulm removal shaft (0120) XXL separating unit (0130) Slip monitoring for the 1st separating unit (0140) Slip monitoring for the 2nd separating conveyor (0150) Speed adjustment for the 1st and 2nd separating unit, electric (0160) 2nd platform (0170) 7.5 ton hopper with wide axle (0180) Hopper filling automation (0190) Potato outlet / crate filling (0200) Automatic axle centering / tilt compensation (0210) Tires 710/50-30.5 (0220) Hydraulic wheel drive (0230) 7-inch monitor (0240) Camera as a reversing camera (0250) Camera for monitoring the transition from the 1st to the 2nd separating unit (0260) Operator terminal VC 50 (0270) Speedtronic (0280) K80 ball head

Condition: used, Year of construction: 2015, working width: 1,500 mm, Equipment: compressed air brake, SE 150-60 NBR 0010 Used Grimme potato harvester 0020 Lower hitch K80, PTO shaft, 0030 Input gearbox 1000 rpm, 0040 2-circuit air brake system, 0050 Hydraulic support leg, 0060 Automatic ridge relief 0070 Automatic row centering 0080 1st sieving web, 40 mm pitch 0090 V2A sheet metal in oscillating frame 0100 Agitators on 1st sieving web 0110 2nd sieving web, 35 mm pitch Gjdjw Sfu Ajpfx Ah Hjuh 0120 Deflector comb adjustment from terminal 0130 Hydraulic haulm flail shaft 0140 Slip monitoring on 1st separating device 0150 Slip monitoring on 2nd sieving web 0160 Speed adjustment 1st, 2nd separating device electric 0170 2nd platform 0180 6t bunker with wide axle 0190 Bunker fill automation 0200 Automatic axle centering/inclination compensation 0210 Wheel drive 0220 Control unit VC50, joystick box GBX 870 and 860, 0230 8-channel camera monitor, 0240 Tyres 710/50-30.5

Condition: used, Year of construction: 2017, Equipment: compressed air brake, SE 150-60 UB GRIMME Potato Harvester K 80 ball hitch 1 3/8" PTO shaft with 6 splines Drive via PTO speed: 540 rpm Row spacing: 75 cm Intake width: 580 mm Ridge rollers: D=390 mm 2-blade share Individually adjustable center share Digging depth adjustment via terminal Automatic ridge pressure control Automatic ridge centering 2 cutting discs Sieving channel width: 1500 mm 1st sieve conveyor, pitch 40 mm Independent agitation drive with support roller V2A stainless steel plates in oscillating frame Oscillating shaker on 1st sieve conveyor with speed adjustment 2nd sieve conveyor, pitch 35 mm Independent agitation drive, 2nd sieve conveyor Coarse haulm conveyor, spacing 280 mm Adjustment for stripper combs via terminal 1 haulm stripping shaft under the coarse haulm conveyor, hydraulic XXL separation unit incl. speed adjustment for 2 brush/finger belts and height adjustment for stripper roller in 1st separation unit 1st separation unit, pitch 40 mm, V-profile hedgehog roller Smooth roller stripper at 1st separation unit Cleaning device in the hedgehog belt of the 1st separation unit Slippage monitoring 1st separation unit and 2nd sieve conveyor 2nd separation unit, pitch 40 mm, V-profile hedgehog roller Smooth roller stripper at 2nd separation unit Cleaning device in the hedgehog belt of the 2nd separation unit Speed adjustment 1st and 2nd separation unit via terminal 3rd separation unit, pitch 40 mm, H-profile hedgehog roller Height adjustment of right and left finger/brush belt Picking table (1100 mm) auxiliary sorting conveyor (340 mm) Pre-elevator with ultrasonic sensor 7.5 t bunker with wide axle Gedpfx Ahsx R H Rws Hjuh Bunker conveyor with tarpaulin Automatic bunker filling incl. automation for pre-elevator and fill optimization Bunker head lowering Air brakes Automatic axle centering and slope compensation Tyres: 800/45-30.5 Rear view camera Operating terminal VC 50 + joystick box Load-sensing system

Condition: used, Year of construction: 2025, operating hours: 316 h, Equipment: compressed air brake, onboard computer, EVO 280 CS GEN II [0010] Grimme potato harvester Evo 280 CS Gen2 [0020] Included in standard delivery scope, with the following additional features: [0030] Operating manual in German [0040] Full EU type approval [0050] Performance - Line [0060] Tow hitch Ø 80 mm [0070] PTO shaft 1 3/8" with 6 teeth [0080] Drive with PTO shaft speed of 1000 rpm [0090] Fully hydraulic drive of all separating belts and separating units [0100] Direct drive [0110] Row spacing 75 cm [0120] Harvesting width: 580 mm [0130] Damming drums [0140] 2-blade share, long [0150] Separately adjustable center share instead of the middle share [0160] Six-disc system [0170] Digging depth adjustment from the terminal [0180] Terra Tronic [0190] Automatic dam center detection [0200] 2 six-disc systems [0210] 2 trash deflector shoes [0220] Without pick-up belt [0230] Separating belt width: 1500 mm [0240] 1st separating belt, pitch 40 mm [0250] 1st separating belt with lock connection [0260] Pitch-independent friction drive for 1st separating belt with [0270] support roller [0280] V2A sheets in the oscillating frame [0290] Oscillating beater in the 1st separating belt with speed adjustment [0300] from the terminal [0310] 2nd separating belt, pitch 35 mm [0320] 2nd separating belt with lock connection [0330] Pitch-dependent PU forced drive for 2nd separating belt [0340] Rough trash belt spacing 280 mm [0350] Retaining spring in front of the rough trash belt, "standard" version [0360] Trash shaft under the rough trash belt Gusdpfx Ajx R H I Ash Hsh [0370] Oil cooler for the self-contained hydraulic system [0380] Belt 1st separating unit, pitch 40 mm [0390] V-profile hedgehog roller 1st separating unit [0400] Scraper 1st separating unit, smooth roller scraper [0410] Tilt adjustment of the 1st and 2nd separating units from the terminal [0420] Height adjustment of the scraper rollers of the 1st separating unit from the terminal [0430] Cleaning device in the hedgehog belt of the 1st separating unit [0440] Angle adjustment of the scraper roller of the 1st separating unit from the terminal [0450] Slip monitoring for the 1st separating unit and 2nd separating belt [0460] Foreign matter discharge belt behind the 1st separating unit [0470] 2nd separating unit: hedgehog belt with rods [0480] Belt 2nd separating unit, pitch 40 mm [0490] V-profile hedgehog roller 2nd separating unit [0500] Scraper 2nd separating unit, smooth roller scraper [0510] Triple scraper roller [0520] Cleaning device in the hedgehog belt of the 2nd separating unit [0530] Speed adjustment for 2 brush or finger belts [0540] from the terminal [0550] Speed adjustment of the 1st and 2nd separating units from the terminal [0560] Angle adjustment of the scraper roller of the 2nd separating unit from the terminal [0570] 3rd separating unit: hedgehog belt with rods [0580] ClodSep(UB) separating unit: two double-row finger scraper belts [0590] Scraper 3rd separating unit, smooth roller scraper [0600] Double scraper roller [0610] V-shaped finger arrangement for higher throughput [0620] Belt 3rd separating unit, pitch: 40 mm [0630] H-profile hedgehog roller 3rd separating unit [0640] Height adjustment of the finger belt, right and left, from the terminal [0650] Height adjustment of the scraper rollers from the 2nd separating unit [0660] from the terminal [0670] Mechanical height adjustment of the scraper rollers from the [0680] from the 3rd separating unit [0690] Turbo Clean sorting table (1100 mm) [0700] Comfort package for sorting table BASIC [0710] Ligh

Condition: used, Year of construction: 2021, 2 rows, axle steering, dam pressure regulation, dyke edge steering, slope compensation, conveying table, 5 cameras, sieve chains with 35mm spacing Area performance: 410 hectares, number of rows (2-row), 2 work lights at the rear, on-board computer/monitor, lighting/warning signs, on-board hydraulics, dam pressure roller/grid roller, air brake, steering axle, performance monitor, operator terminal, slope compensation, conveying table, camera/video surveillance, wide-angle universal joint shaft, hectare counter, additional/work lighting, ISOBUS, hopper or transfer hopper, dam drum, dam center finding, crop beater Guodoz Nrt Dopfx Ah Hsh = Further information = General condition: good Technical condition: good Optical condition: good Working width of rows: 2 Please contact Ria Lange for further information.

Condition: used, Year of construction: 2022, Axle steering Guodpez Nrpxofx Ah Hjh Dike furrow steering Coarse crop band Clod separating device Dam pressure regulation Independent hydraulic system Drawbar coupling, 80 mm diameter Separately adjustable center share Digging depth adjustment from the terminal Automatic dam relief Rubber flail roller with share for picking up potatoes and onions, 1100 mm wide Sieve channel width 1700 mm VA2 steel plates in the oscillating frame Slip monitoring of the first separating device and the second sieve belt Additional mounted feed hopper chute on the right and left Feeder belt adjustable, with differential speed to the sorting table Stone bunker with discharge conveyor Pre-elevator with ultrasonic sensor Bunker filling automation including automation for the pre-elevator and filling optimization Potato outlet padded on the roller floor bunker for crate filling/fall brake Hydraulic folding device for the potato outlet Automatic axle center alignment Tires (front): 710/50-30.5, area performance: 280 hectares, number of rows (2-row), slope compensation, sorting table, dam center alignment = Further information = General condition: good Technical condition: good Optical condition: good Working width, rows: 2 Please contact Ria Lange for more information.

Condition: used, Year of construction: 2021, operating hours: 1,527 h, power: 340 kW (462.27 HP), Equipment: cabin, front power take-off, VARITRON 470 (0010) Used Grimme self-propelled potato harvester (0020) VARITRON 470 wheeled machine MULTISEP (0030) Front linkage for haulm topper (0040) Preparation for haulm spreader (0050) Row spacing: 75 cm (0060) Intake width: 580 mm (0070) Ridge drums: Ø 390 mm, flat (0080) 2-blade share (0090) Row lifting system for tramline digging (0100) TerraControl (0110) Hydraulically driven disc coulters (8 pcs.) (0130) Intake conveyor 3000 mm (0140) Intake conveyor pitch 40 mm (0150) Pitch-dependent PU positive drive for intake conveyor (0170) 1st sieving web, pitch 40 mm (0180) Pitch-dependent PU positive drive for 1st sieving web (0200) Shaker system in 1st sieving web with speed adjustment from terminal (0230) Pulling roller against 1st sieving web (0240) Guide for 1st pulling unit / pulling roller: brush (0260) 2nd sieving web, pitch 35 mm (0270) Pitch-independent friction drive for 2nd sieving web (0290) Intake conveyor, 1st and 2nd sieving webs reversible (0310) Rotary shaker with adjustable speed in 2nd sieving web, hydraulically driven, connected in series with the shaker in 1st sieving web (0350) Conveyor belt to fine haulm elevator, pitch: 35 mm, vulcanized (0370) Speedtronic-Web: automatic speed adjustment of sieving webs, INNOVATION (0400) Segment roller with black segments (0410) Guide for 2nd pulling unit / pulling roller: brush (0430) Segment rollers 1st MultiSep, Ø 162 mm, 4 lips (0450) Clod rollers 1st MultiSep, rubber (0460) Fine haulm elevator lower section, hydraulically driven (0480) Belt for lower fine haulm elevator, pitch 40 mm (0500) Scraper roller on fine haulm elevator, reversible from terminal (0520) OptiBag, PU perforated pocket belt (0530) Speedtronic-Elevator: automatic elevator speed control (0560) NonstopBunker with reversing floor (0580) Lubrication system for bunker chain Gsdpfxjx R Iqlj Ah Houh (0590) Automatic bunker filling system (0600) Automatic axle centering and levelling system (0620) Autopilot (0630) Front axle tyres 270/95 R54, track width 3.0 m (0650) Rear left tyre 900/60 R32, (0660) Rear right tyre 1050/50 R32 (0670) Hydrostatic single-wheel drive (0680) Mercedes-Benz (MTU) engine OM 470 LA, Stage V with SCR exhaust technology (AdBlue). Diesel fuel according to EN 590 (0720) Premium comfort cab with additional sound insulation, leather seat with active ventilation and seat heating, as well as cool box (0760) Video package 2 (0770) Visual Protect: CAN bus controlled monitoring system (0790) ErgoDrive operating concept with freely configurable direct access functions on the multifunction lever and in the ergonomic armrest control panel, (0840) as well as a CCI 100 and a CCI 50 touchscreen terminal (0860) Clean Control (central adjustment function for separation devices) (0880) Automatic lubrication system (0890) Connection to myGRIMME (0900) 6 LED headlights in cab roof (0910) Additional lighting: 6 additional headlights (0930) HT 400 (0940) Row width 75 (0950) Haulm topper mount VARITRON removable (0970) Automatic haulm topper depth control (0980) Integrated haulm spreader with discharge width adjustment from cab

Condition: used, Year of construction: 2021, operating hours: 1,609 h, Equipment: onboard computer, EVO 280 (0010) Used Grimme potato harvester EVO 280 EasySep (0020) Ball-type hitch (0030) PTO speed 540 rpm (0040) Adjustable center share (0050) Automatic ridge relief (0060) Automatic ridge centering (0070) Additional outer coulter disc (0080) 1st sieving web with 40 mm pitch (0090) Stainless steel (V2A) plates in the shaker frame (0100) Shaker head in 1st sieving web (0110) 2nd sieving web with 35 mm pitch (0120) Vario Drive (0130) Speedtronic-Web (0140) Adjustment of stripper combs from the terminal (0150) Oil cooler for the integrated hydraulic system (0160) Electric inclination adjustment for separation units (0170) Electric stripper roller, 1st separating unit (0180) Electric angle adjustment (0190) Slip monitoring 1st separator/2nd sieving web (0200) Foreign material discharge conveyor (0210) Speed adjustment for separator unit, electric (0220) Electric angle adjustment for stripper roller (0230) Electric height adjustment for stripper roller (0240) Turbo Clean (0250) Speedtronic-Sep (0260) Comfort package sorting table Basic (0270) Picking conveyor with carriers (0280) Pre-elevator with ultrasonic sensor (0290) 8-ton bunker Guodpfxox R Ir Nj Ah Hjh (0300) Automatic bunker filling system (0310) Potato outfeed in the moving floor bunker (0320) Automatic axle centering (0330) Automatic leveling system (0340) Tyres 850/50R30.5 (0350) Telescopic axle left (0360) SmartView Pro (0370) Lighting package Pro (0380) CCI 1200 control terminal (0390) Grimme GBX 860/871, (0400) Multi-function joystick (0410) Camera system incl. monitor (0420) MemoryControl

Condition: used, Year of construction: 2017, Equipment: compressed air brake, -AUCTION MACHINE- ab-auction SE 150-60 UB GRIMME potato harvester used Grimme harvester tow ball coupling K 80 PTO shaft 1 3/8" with 6 teeth drive with PTO shaft speed 540 rpm row spacing: 75 cm picking width: 580 mm separating drums: D=390 mm digging depth adjustment from the terminal automatic clod pressure regulation automatic clod centering 2 six-disc units sieve channel width: 1500 mm V2A sheets in the oscillating frame coarse debris conveyor distance 280 mm 1 debris removal shaft under the coarse debris conveyor, hydraulic XXL separating unit including speed adjustment for 2 brush / sorting tables (1100 mm) mixing belt (340 mm) 7.5 t hopper with wide axle hopper conveyor with fabric hopper filling automation including automatic function for pre-elevator and hopper top lowering air brake Gsdpfx Ahox R H R Do Hsuh automatic axle centering and tilt automation tire size 800/45-30.5 operator terminal VC 50 + joystick box load sensing machine not ready for operation an inspection before placing a bid is recommended you can bid on this machine online the starting price is 13,900.00 EUR excl. VAT register free of charge and start bidding click here to go to the auction: ----- ----- Exciting online auction! Start bidding NOW! ab-auction

Condition: used, Year of construction: 2016, operating hours: 1,439 h, Equipment: compressed air brake, onboard computer, Grimme SE 150-60 NB 0010 Used GRIMME potato harvester, standard model 0020 Tow hitch, K80 0030 PTO shaft with 6 splines 0040 Drive with PTO speed of 540 rpm 0050 Direct drive 0060 Row spacing: 75 cm 0070 Harvesting width: 580 mm 0080 Half separating rollers: 390 mm 0090 3-blade share, long 0100 Separately adjustable center share 0110 Replacing the middle disc shares 0120 Stone protection for the digging share 0130 Harvesting depth adjustment from the terminal 0140 Automatic soil removal 0150 Automatic detection of the ridge center 0160 2 disc shares 0170 Sieve belt width: 1500 mm 0180 1st sieve belt with 40 mm spacing 0190 1st sieve belt with locking connection 0200 Belt drive independent of spacing 0210 1st sieve belt with support roller 0220 V2A steel sheets in the oscillating frame 0230 Oscillating beaters in the 1st sieve belt with 0240 Speed adjustment from the terminal 0250 2nd sieve belt with 35 mm spacing 0260 2nd sieve belt with overlapping 0270 connection 0280 Belt drive independent of spacing 0290 2nd sieve belt 0300 Coarse soil conveyor, distance: 280 mm 0310 Adjustment for scraper combs 0320 from the terminal 0330 1 soil scraper shaft under the 0340 coarse soil conveyor, hydraulically driven 0350 XXL separating unit for NB, including 0360 height adjustment of the scraper roller 0370 1st separating unit, adjustable from the terminal and 0380 3rd separating unit, NB hedgehog belt 0390 Belt 1st separating unit, spacing 40 mm 0400 H-profile hedgehog bar, 1st separating unit 0410 Scrapers, 1st separating unit, smooth rollers 0420 Scrapers 0430 Cleaning system in the hedgehog belt of the 0440 1st separating unit 0450 Slip monitoring, 1st separating unit and 0460 2nd sieve belt 0470 2nd separating unit: hedgehog belt with bars 0480 Belt, 2nd separating unit, spacing 40 mm 0490 V-profile hedgehog bar, 2nd separating unit 0500 Scrapers, 2nd separating unit, smooth rollers 0510 Scrapers 0520 Cleaning system in the hedgehog belt of the 0530 2nd separating unit 0540 Speed adjustment for 1st and 2nd 0550 separating units from the terminal 0560 3rd separating unit: hedgehog belt with bars 0570 3rd separating unit: NB hedgehog belt, without 0580 addition belt, with discharge chute on the left 0590 3rd separating unit: standard scraper 0600 Belt, 3rd separating unit, spacing 40 mm 0610 2nd platform with discharge chute and 0620 cross conveyor for additions 0630 Sorting table (1100 mm) 0640 7.5 t bunker with wide axle 0650 Bunker conveyor with fabric 0660 Bunker filling automation, including automatic 0670 system for the loading elevator and filling optimization 0680 Bunker top lowering 0690 Air brake 0700 Automatic axle centering and inclination 0710 automatic system 0720 7" monitor and multiplexer of the GRIMME 0730 video system, up to 8 cameras possible 0740 Camera as rear-view camera, mounted, 0750 including lighting 0760 Camera transition from the 1st to the 3rd 0770 separating unit, mounted, including lighting 0780 Camera, sorting table, mounted, including 0790 lighting 0800 Camera, bunker top, mounted, including 0810 lighting 0820 Visual Protect: CAN-bus controlled 0830 monitoring system 0840 Operator terminal VC50 + joystick box Gjdsw Nzxlopfx Ah Hsuh 0850 instead of standard operator terminal 0860 Multifunction lever instead of 0870 joystick box on the right 0880 Speedtronic 0910 for the tractor 0940 Tires: 600/45-30.5 Alliance

Condition: used, Year of construction: 2023, operating hours: 1,122 h, Equipment: compressed air brake, onboard computer, Grimme EVO 280 (0010) Used Grimme potato harvester (0020) Full EU type approval (0030) Comfort-Line (0040) K80 ball hitch (0050) Drive with PTO speed 540 rpm (0060) PTO shaft 1 3/4" with 20 splines (0070) Direct drive, row spacing 75cm (0080) Intake width 580mm, ridge drums 390mm (0090) 2-blade long share (0100) Separately adjustable center share (0110) in place of middle coulter discs (0120) Harvesting depth adjustment via terminal (0130) Automatic ridge relief (0140) Automatic ridge center finding (0150) 2 coulter discs (0160) Additional external coulter disc (0170) Sieving channel width 1500 mm (0180) 1st sieve web pitch 40 mm (0190) 2nd sieve web pitch 35 mm (0200) VarioDrive: stepless drive for the 1st and 2nd sieve webs (0220) Coarse weed belt spacing 280 mm (0230) Adjustment for stripper combs via terminal (0250) 1 haulm stripper shaft under the coarse weed belt, hydraulically driven (0270) Oil cooler for on-board hydraulics (0280) Web 1st separation unit pitch 40 mm (0290) H-profile rubber finger rods 1st separator (0300) Scraper for 1st separator smooth roller scraper (0320) Tilt adjustment for 1st and 2nd separator via terminal (0340) Height adjustment for scraper roller 1st separator via terminal (0360) Cleaning device in the finger web of the 1st separator (0380) Angle adjustment for scraper roller 1st separator via terminal (0400) Slippage monitoring 1st separator and 2nd sieve web (0420) Discharge conveyor for foreign material behind first separator (0440) 2nd separator: finger web with rods (0450) Web 2nd separator pitch 40 mm (0460) H-profile rubber finger rods 2nd separator (0470) Scraper 2nd separator smooth roller scraper (0490) Triple scraper roller (0500) Automatic inclination control 1st and 2nd separator (0510) Speed adjustment 1st and 2nd separator from terminal (0530) Angle adjustment for scraper roller 2nd separator via terminal (0550) 3rd separator: finger web with rods (0560) EasySep(NB) separator: roller scraper (0570) Band 3rd separator pitch 40 mm (0580) H-profile rubber finger rods 3rd separator (0590) Height adjustment for scraper rollers 2nd and 3rd separator from terminal (0610) Turbo Clean (0620) Picking table (1100 mm) (0630) Comfort package picking table PRO (0640) Illumination for picking table (0650) Picking belt with carriers (0660) Intake elevator with ultrasonic sensor (0670) 8.0 t bunker, bunker belt with fabric (0680) Automatic bunker filling including automatic system for intake elevator and filling optimization (0710) Bunker head lowering, pneumatic brakes (0720) Permitted maximum speed 40 km/h (0730) Automatic axle centering and inclination control (0750) Tyres 850/50 R30.5 (0760) Telescopic axle for left rear wheel (0780) Multifunction lever (ISOBUS capable) (0790) instead of right-hand joystick box (0800) Mineral oil (0810) Load-sensing kit with control line to tractor (0830) Operator’s manual already defined by country of use (0850) Operator’s manual terminal in German (0860) ISOBUS basic equipment (0870) ISOBUS terminal - CCI 1200 (0880) Memory Control (0890) SmartView monitor (0900) SmartView PRO camera package (0910) Visual Protect Pro - function monitoring (0930) Speedtronic-Web: ground speed- and load-dependent sieve web control (0960) Speedtronic-Sep: Automatic Gedpjytkgyjfx Ah Hjuh

Condition: used, Year of construction: 2021, operating hours: 1,000 h, Equipment: compressed air brake, GT 170 0010 Used Grimme Potato Harvester, 2-row GT 170 S - HE 0030 PTO shaft 540 rpm with overload clutch 0040 Hydraulic slope compensation 0050 Hydraulic axle steering 0060 Tyres 400/70-20 AS 0070 Ridge intake via trailed unit 0080 Intake unit with 4 0090 trailed, suspended coulters 0100 Coulter spacing 0110 540, 580 or 620 mm 0120 2- or 3-blade share 0130 2 flat ridge rollers 0140 Haulm intake rollers on the outside and 0150 central retaining rubber 0160 Mechanically driven, manually 0170 height-adjustable 0180 Rotor beater on the 1st sieving web 0190 Pick-off roller against the 1st sieving web 0200 1st sieving web pitch: 0210 28, 32, 35, 40, 45 0220 or 50 mm 0230 Bar spacing 0240 2nd sieving web pitch: 32, 35, 40 or 45 0250 mm High-performance, hydraulically 0260 driven unloading elevator 0270 Brake and lighting system 0280 Drawbar ball coupling Ø 80 mm 0290 Hydraulic drawbar adjustment 0300 Standard PTO shaft 0310 PTO shaft with 6 splines 0320 Drive with PTO speed 540 rpm 0330 Main drive with 22% speed reduction 0340 Row spacing 75 cm 0350 Intake width: 580 mm 0360 Half ridge rollers: Ø 390 mm, flat 0370 2-blade share 0380 Separately adjustable centre share 0390 TerraControl 0400 2 coulters 0410 Intake belt with mechanical drive 0420 Intake belt pitch 45 mm 0430 Pitch-dependent PU positive drive 0440 Clod breaker in intake conveyor 0450 Sieving channel width 1700 mm 0460 1st sieving web pitch 40 mm 0470 V2A stainless steel sheets in the shaker frame 0480 Rotor beater in the 1st sieving web with 0490 mechanical adjustment 0500 Shaker beater on the 1st sieving web with 0510 Speed adjustment via terminal 0520 Pick-off unit consisting of segment roller Guedpfsxfcy Uex Ah Hoh 0530 and double pick-off roller 0540 Guide for 1st pick-off unit/pick-off roller: comb 0550 2nd sieving web pitch 35 mm 0560 2nd sieving web coated 0570 Clod breaker on the 2nd sieving web 0580 3rd sieving web pitch: 35 mm 0590 Fine haulm elevator below, hydraulically driven 0600 Fine haulm elevator belt below, pitch 40 mm 0610 Distributor star rollers under 0620 fine haulm elevator 0630 OptiBag, PU perforated pocket belt 0640 Cross elevator belt right and 0650 left running, with discharge hopper 0660 Air brake system 0670 Maximum speed 30 km/h 0680 Automatic axle centre finding and 0690 automatic slope control 0700 Tyre left: 620/50-22.5 0710 right: 320/85 R32 0720 Potato discharge via elevator on the right 0730 Without terminal 0750 ISOBUS 0760 Cameras

Condition: used, Year of construction: 2019, operating hours: 1,660 h, Equipment: compressed air brake, EVO 280 Gimme Potato Harvester K80 Ball Hitch 6-tooth PTO drive shaft 540 rpm PTO drive Direct drive Row width 75 cm, Pick-up width: 580 mm, Diaphragm drums: 390 mm diameter 2-blade share Separately adjustable center share - extra TerraTronic Automatic ridge centering 4 coulter discs 2 haulm deflector skids Sieve channel width 1500 mm 1st sieve web pitch 40 mm 1st sieve web with lock connection Pitch-independent Friction drive for the first screening belt with support roller 1st screening belt speed - fast V2A plates in the oscillating frame Oscillating agitator in the first screening belt with speed adjustment 2nd screening belt pitch 35 mm with lock connection Pitch-independent friction drive for the second screening belt VarioDrive: continuously variable drive for the first and second screening belts Speedtronic-Web: forward speed and load-dependent screening belt control Coarse haulm belt spacing 280 mm Stripper shaft adjustment from the terminal 1 haulm stripper shaft under the coarse haulm belt, hydraulic. Driven Oil cooler for the company's own hydraulics Belt of the first separator, pitch 40 mm V-profile hedgehog bar of the first separator Smooth roller scraper on the first separator Tilt adjustment of the first and second separators from the terminal Height adjustment of the scraper roller of the first separator from the terminal Cleaning device in the hedgehog belt of the first separator Angle adjustment of the scraper roller of the first separator from the terminal Slippage monitoring of the first separator and the second screening belt Trash removal belt behind the first separator 2nd separator: hedgehog belt with bars Belt of the second separator, pitch 40 mm V-profile hedgehog bar of the second separator Smooth roller scraper of the second separator Speed adjustment for 2 brush or finger belts Automatic tilt adjustment of the first and second separators Speed adjustment of the first and second separators Angle adjustment of the scraper roller of the second Separator 3rd Separator: Hedgehog belt with bars - pitch: 40 mm H-profile hedgehog bar for 3rd Separator Height adjustment of the finger belt, right and left Height adjustment of the scraper rollers for the 2nd Separator Mechanical height adjustment of the scraper roller for the 3rd Separator Bunker belt with cloth Gusdewgy S Hopfx Ah Hoh Automatic bunker filling including automatic control for the front elevator and Filling optimization Bunker head lowering Air brake Automatic axle centering and automatic tilt control Tires: 850/50 R30.5 ISOBUS control terminal CCI 1200 Touchscreen terminal GBX 860 control box ISOBUS MemoryControl Camera system

Condition: used, Year of construction: 2020, operating hours: 1,160 h, working width: 1,500 mm, Equipment: onboard computer, EVO 290 (0010) Used Grimme potato harvester (0020) K80 ball hitch (0030) PTO drive speed 1000 rpm (0040) Adjustable center share (0050) Automatic ridge pressure relief (0060) Automatic ridge centering (0070) Additional outer disc coulter (0080) 1st sieving web, 40mm pitch (0090) V2A stainless steel plate in shaker frame (0100) Agitator on 1st sieving web (0110) 2nd sieving web, 35mm pitch (0120) Vario Drive (0130) Speedtronic-Web (0140) Adjustment for cleaning combs via terminal (0150) 1 haulm stripper shaft under coarse haulm web (0160) Height adjustment of stripper roller (0170) Angle adjustment of stripper roller (0180) Slip monitoring for 1st separating device (0190) Slip monitoring for 2nd sieving web (0200) Speed control for 1st and 2nd separating devices (0210) Speedtronic-Sep (0220) Intake elevator with ultrasonic sensor (0230) Automatic bunker filling system (0240) Potato discharge at moving floor bunker (0250) Hydraulic folding device for potato discharge outlet (0260) Automatic axle centering (0270) Automatic slope compensation Godpfjxavplox Ah Heuh (0280) Left tire 850/50R30.5 (0290) Right tire 1000/50R25 (0300) Hydrostatic wheel drive (0310) 4x cameras with lighting/monitor (0320) CCI 800 control terminal (0330) Grimme GBX 860 / 871 (0340) Visual Protect (0350) MemoryControl (0360) Area performance: 824 ha

Condition: used, Year of construction: 2020, operating hours: 500 h, Equipment: compressed air brake, onboard computer, SE 260 (0010) Used Grimme potato harvester (0020) Standard model (0030) National approval / individual inspection (0040) Equipment for Germany (collection) (0050) Tow ball coupling Ø 80 mm (0060) PTO shaft with 6 teeth (0070) Drive with PTO speed of 540 rpm (0080) 3-speed gearbox (0090) Row spacing 80 cm (0100) Digging width: 600 mm (0110) Half ridging drums with collar: Ø 390 mm (0120) 2-blade long share (0130) Separately adjustable center share (0140) instead of middle disc shares (0150) Stone protection for spade share (0160) Mechanical digging depth adjustment (0170) TerraControl (0180) Automatic ridge center detection (0190) 2 disc shares (0200) Additional disc share on the outside (0210) Sieve belt width 1700 mm (0220) 1st sieve belt pitch 35 mm (0230) 1st sieve belt with locking connection (0240) Pitch-independent friction drive (0250) 1st sieve belt with support roller (0260) Speed of 1st sieve belt - normal (0270) V2A sheets in oscillating frame (0280) Oscillating clapper in 1st sieve belt (0290) with speed adjustment (0300) from the terminal (0310) 2nd sieve belt pitch 32 mm (0320) 2nd sieve belt with locking connection (0330) Pitch-independent friction drive (0340) 2nd sieve belt (0350) Coarse soil band spacing 200 mm (0360) 2 additional scrapers (0370) for coarse soil band (0380) Belt 1st separating unit pitch 45 mm (0390) H-profile hedgehog bar 1st separating unit (0400) Scraper 1st separating unit (0410) Smooth roller scraper (0420) Tilt adjustment (0430) 1st and 2nd separating units from the terminal (0440) Height adjustment of scraper roller (0450) 1st separating unit from the terminal (0460) Slip monitoring 1st separating unit (0470) and 2nd sieve belt (0480) 2nd separating unit: hedgehog belt with bars (0490) Belt 2nd separating unit pitch 45 mm (0500) H-profile hedgehog bar 2nd separating unit (0510) Scraper 2nd separating unit (0520) Smooth roller scraper (0530) Speed adjustment for 2 (0540) brush/finger belts from the terminal (0550) Speed adjustment 1st and 2nd (0560) separating unit from the terminal (0570) Height adjustment of the (0580) finger/brush belt on the left from the terminal (0590) Speedtronic separation: Automatic (0600) speed adjustment of the (0610) separating units Gsdpfezxu Svox Ah Hsuh (0620) Infeed chute on the right and left (0630) additionally installed (0640) Wide sorting table (930 mm) (0650) Take-away belt (280 mm) (0660) Sorting belt with drive rollers (0670) Roller pre-cleaning, 5 rollers, radial (0680) infinitely adjustable, without hopper (0690) Rollers for roller pre-cleaning (0700) Spacing 20 mm (0710) Conveyor belt from roller pre-cleaning (0720) to stone bunker (0730) Stone bunker with discharge belt (0740) Front elevator with ultrasonic sensor (0750) 6.0 t hopper (0760) Hopper belt with fabric (0770) Hopper filling automation incl. automatic system (0780) for front elevator (0790) and filling optimization (0800) Hopper top lowering (0810) Air brake (0820) Automatic axle center detection and (0830) inclination automatic (0840) Tire size 710/45-26.5 (0850) 7" monitor and multiplexer of the (0860) Grimme video system, up to 8 cameras (0870) possible (0880) Camera as reversing camera, mounted, (0890) incl. lighting (0900) Camera 1st sieve belt, mounted, (0910) incl. lighting (0920) Camera transition from 1st to 2nd (0930) separating unit, mounted, incl. lighting (0940) Camera sorting table, mounted, (0950) incl. lighting (0960) Weather protection without side panels (0970) Lighting for weather protection 1x (

Condition: used, Year of construction: 2008, GL 34 F/KL 0010 Used Grimme GL 34 K Gusdozfw Hvjpfx Ah Hsh 0020 Chassis number: 24401259 0030 Year of manufacture: 2008 0040 Used Grimme GL 34 KL 0050 4-row 0060 Front sensing wheels 0070 Prepared for seed treatment 0080 Cushioned discs 0090 Row marker 0100 Hydraulic tipping hopper

Condition: used, Year of construction: 2007, Equipment: compressed air brake, SE 150-60 NBR (0010) Used Grimme SE 150-60 NBR (0020) Hydraulic axle steering (0030) Automatic axle centering (0040) Axle with air brake (0050) Automatic row centering (0060) Tow ball coupling (0070) Tires 700/50x30.5 (0080) V2A steel plates in the oscillating frame Guedpfx Ahez H S Ems Hoh (0090) Hydraulic adjustment for scraper combs (0100) Drive 540 rpm (0110) 2nd platform with feed-in chute and (0120) Transverse discharge conveyor, automatic for pre-selection (0130) Filling optimization for moving floor hopper (0140) 7.5-ton hopper with wide axle (0150) Hopper top lowering, operating terminal

Condition: used, Year of construction: 2020, operating hours: 4,271 h, SE 150-60 NB Grimme potato harvester K80, lower linkage, 1000 rpm PTO Air brake system, drawbar steering, axle steering Godpfx Asy Hgbueh Houh Automatic axle centering, automatic tilt compensation Tyres 710/50-30.5 Trelleborg 40 km/h, load-sensing, camera system Work lights, lighting, warning board D-centralizing, number of rows 2, row spacing 75 cm Divided share, additional disc coulter Electric shaker, separation devices, slip monitoring Sorting table (head can be lowered), stone box, bunker harvester 7 t Bunker filling optimization, bunker head can be lowered

Condition: used, Year of construction: 2023, operating hours: 1,468 h, Equipment: compressed air brake, onboard computer, EVO 280 CS (0010) Used Grimme potato harvester Evo 280 (0020) Complete EU type approval (0030) Comfort-Line (0040) Tow ball hitch 80 mm (0050) PTO shaft 1 3/8" with 6 teeth Godpfx Ajyfx A Heh Houh (0060) Drive PTO speed 1000 rpm (0070) Direct drive (0080) Row spacing 75 cm (0090) Digging width 580 mm (0100) Clod separation drums 390 mm (0110) 3-blade share, long (0120) Separately adjustable middle share (0130) positioned in place of the middle set of discs (0140) Digging depth adjustment from the terminal (0150) TerraTronic (0160) Automatic clod center detection (0170) 2 sets of discs (0180) Additional sets of discs on the outside (0190) Sieving channel width 1500 mm (0200) 1st sieving belt, spacing 40 mm (0210) 1st sieving belt with interlocking joint (0220) Spacing-independent friction drive (0230) 1st sieving belt with support roller (0240) Speed of 1st sieving belt, fast (0250) V2A sheets in the oscillating frame (0260) Oscillating beaters in the 1st sieving belt with (0270) Speed adjustment from the terminal (0280) 2nd sieving belt, spacing 35 mm (0290) 2nd sieving belt with interlocking joint (0300) Spacing-independent PU positive drive (0310) 2nd sieving belt (0320) VarioDrive: stepless drive for the (0330) 1st and 2nd sieving belts (0340) Coarse soil belt, spacing 280 mm (0350) Retaining spring at the front of the coarse soil belt (0360) "standard" design (0370) Adjustment for the stripping combs from the (0380) terminal (0390) Soil web under the coarse soil belt (0400) Oil cooler for the self-contained hydraulic system (0410) Belt, 1st separating unit, spacing 40 mm (0420) H-profile hedgehog bar, 1st separating unit (0430) Smooth roller scraper, 1st separating unit (0440) Tilt adjustment for the 1st and 2nd separating (0450) units from the terminal (0460) Cleaning device in the hedgehog band of the (0470) 1st separating unit (0480) Angle adjustment of the scraper roller (0490) 1st separating unit from the terminal (0500) Slip monitoring of the 1st separating unit and (0510) 2nd sieving belt (0520) Drop-off conveyor for secondary produce behind the (0530) 1st separating unit (0540) 2nd separating unit: hedgehog belt with bars (0550) Spacing 40 mm, H-profile hedgehog bar (0560) Smooth roller scraper, 2nd separating unit (0570) Triple scraper roller (0580) Cleaning device in the hedgehog band of the (0590) 2nd separating unit (0600) Speed adjustment for (0610) 2 brush or finger belts from the (0620) terminal (0630) Automatic tilt adjustment for the 1st and 2nd separating units (0640) Speed adjustment for the 1st and (0650) 2nd separating units from the terminal (0660) Angle adjustment of the scraper roller (0670) 2nd separating unit from the terminal (0680) 3rd separating unit: hedgehog belt with bars (0690) ClodSep (UB) separating unit: 2 2-row (0700) finger scraper belts (0710) Smooth roller scraper, 3rd separating unit (0720) Belt, 3rd separating unit: spacing 40 mm (0730) H-profile hedgehog bar, 3rd separating unit (0740) Height adjustment of the finger belt on the right (0750) and left, from the terminal (0760) Height adjustment of the scraper rollers (0770) from the 2nd separating unit from the terminal (0780) Mechanical height adjustment of the (0790) scraper rollers from the 3rd separating unit (0800) Turbo Clean (0810) Sorting table (1100 mm), (0820) Comfort package for the sorting table PRO (0830) Lighting for the sorting table (0840) Sorting belt with drive elements (0850) Drop-off conveyor, "bar belt" design (0860) Drop-off cross conveyor, re