Forestry vehicle

K.T.S Rückewagen Forst Holz

Condition: used, Year of construction: 2023, operating hours: 1,742 h, power: 250 kW (339.91 HP), Equipment: air conditioning, cabin, front power take-off, onboard computer, T 7.340 AUTO COMMAND HD PLM New Holland Tractor - ELITE: Maximum efficiency through automation and innovative features. Efficient stepless AutoCommand transmission (optional 40 km/h Eco or 50 km/h Eco). Electrohydraulic control units and high-performance hydraulics (165 l/min or 220 l/min optional). Four-speed PTO: 540/540E & 1000/1000E. - Manually telescopic, electrically adjustable rearview mirrors with wide-angle function and mirror heating. - 680 mm pivoting front mudguards. - Rear mudguard controls on both sides (EHR, PTO, 1 configurable rear remote valve, engine speed memory, and engine stop). - Wide rear fender extensions (240 mm). - Electronic key and electronic start button on the right fender (immobilizer, electric door lock). - Cab without right door (emergency exit only). - Hydraulically suspended cab (hydraulic suspension with three-stage adjustment via terminal). Park lock Horizon Ultra Cab: - DYNAMIC COMFORT cab specification: DYNAMIC COMFORT air-suspended seat with DDS low-frequency suspension, automatic weight adjustment, dynamic damping, seat heating, passenger seat in leather, leather steering wheel, floor mat with NH emblem, automatic climate control, and ambient cab lighting. - Special BLUE POWER paintwork, air conditioning, passenger seat. - Rear wheel weights 1000 kg (4 x 250 kg). - Front linkage management incl. electric front outlets (7 and 3-pin 12V, 30A plug sockets). - Front linkage with 2 additional front lines for mid-mount valves. Bwedpfxoyk I Nys Adwsw - Intelligent Trailer Brake System (ITBS) and steered axle control when reversing; programmable cab suspension. - Air supply system and two-line brake valve. - HD drawbar with integrated K80 ball. - Automatic quick-adjust trailer hitch, 38 mm pin. - Power Beyond adapter plate without couplers. - Extended joystick (can control up to 6 valves; 2 assignable keys, immobilizer buttons, forward and reverse buttons, range shift). - 2 electronically controlled mid-mount valves. - 5 electronically controlled rear valves (color-coded, configurable). - Hydraulic lower link stabilizers. - Rear hitch Cat. 3 with two external lift cylinders (120 mm), quick hitch hooks, ball holders, hydraulic top link, and remote cab door lock. - High-flow hydraulic pump 220 l/min. - Suspended and braked front axle CAT. 4.75. - Additional 1 3/4'' 20-spline PTO stub shaft. - Four-speed rear PTO: 540/540E/1000/1000E rpm with electronic speed change, (optional) front axle suspension. PTO stub shaft with 6 splines fitted + 21 splines (1 3/8'') supplied. - HD high-performance brake discs on rear axle. - Flanged axle 2490 mm (98''). - Standard permissible gross weight 16,800 kg. - Electronic park lock. - Auto Command – stepless transmission 50 km/h ECO. Intuitive touchscreen monitor. - Preheating system. - Main and auxiliary fuel tanks without tank protection. - Viscotronic fan & Tier 5 engine. - Tire brand: MICHELIN. - IntelliView 12 (HTS 2 headland management optional), IntelliSteer & PLM autoguidance, Power Beyond ISOBUS Class II or II.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, Additional information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge rim, slope of the loading area towards the rear axle by approx. 8° downwards. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with NIRO sheet metal at the bend as a rope guide - flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow hitch Tow hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, including mounting and electrical system with 7-pole socket Accessories/Modifications 2 holders for wheel chocks, aluminum side underrun protection, foldable - These are taken over from the truck! Steel underrun protection, quarter-shell fenders with mud flaps - These are taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including locking mechanism, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front wall switched via parking lights with switch on the front wall outside on the driver's side, 1 LED work light, at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pole 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 including with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously laid over the entire main frame platform Tie-down eyes 12 pairs of tie-down eyes in the outer frame, freely pivotable - each 10 tons. 1 at the very front and the last one at the very rear. 1 tie-down eye at the very rear in the middle for attaching the winch cable 12 tie-down eyes recessed in the center of the floor, each 5 tons. Front wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front wall height. Each 2 x 12 mounting brackets for lashing chains mounted on the left and right on the front wall Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center on the front wall (recessed with loading bridge), operated with a wireless remote control, rope length min. 35 m x 9.5 mm, with rope window, with rope pressure plate, including overload protection, rope free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading with ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle Ramp surface made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset for resting on loading ramps. Labeling of the ramp operation. Bwedpfxsk Unitj Adwsw Lowering brake valve for lowering the ramp Support Adjustable support le

Condition: used, functionality: fully functional, first registration: 11/2009, next inspection (TÜV): 04/2026, Year of construction: 2009, operating hours: 2,360 h, Fendt 208V Vario, completely overhauled, in very good condition, with used Kugelmann Vario plough 180cm, used Rauch SA 360 salt spreader, used Vario plough 220cm, used Hydrac front loader and rear ballast weight. Bedpfx Ajyqw Ifodwsww

Condition: used, Year of construction: 2020, operating hours: 5,035 h, Internal vehicle number: VTC30051 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova CAT 330 crawler excavator with OilQuick – 30.8 tonnes – 5,035 operating hours German CAT 330 crawler excavator, manufactured in 2020, with 5,035 operating hours. The machine has an operating weight of 30,800 kg and is equipped with a CAT C7.1 ACERT engine and a hydraulic OilQuick quick-change system. Technical data: * Vehicle number: VTC30051 * Vehicle condition: Used machine * Category: Crawler excavator * Manufacturer: Caterpillar * Model: CAT 330 * Year of manufacture: 2020 * Operating hours: 5,035 hrs * Operating weight: 30,800 kg * German vehicle Engine and hydraulics: * CAT C7.1 ACERT diesel engine * Hydraulic drive * Hydraulic lines on the boom * Auxiliary hydraulics for attachments * Hydraulic OilQuick quick-change system Equipment: * OilQuick quick-change system Bedpfx Adszwitxowsww * Crawler undercarriage * Enclosed operator’s cab * Cab protection grille * Work lights * Rearview mirrors * Generous access panels for maintenance Information about the OilQuick quick-change system according to the nameplate: * Manufacturer: OilQuick Deutschland GmbH * Hydraulic quick-change system * Year of manufacture: 2020 * Designed for carrier machines up to a maximum of 45 tonnes * CE marking available The hydraulic OilQuick quick-change system enables quick changes of suitable attachments directly from the operator's cab. Use is permitted only with matching OilQuick adapter plates of the same size and in accordance with the manufacturer's instructions. Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale reserved. Financing example: * Internal number:

Condition: used, functionality: fully functional, Year of construction: 2014, Ferri brush cutter arm, model TP61 Farm Year of manufacture: 2014 Ferri mulching head model TI 120 (width: 1200 mm) Three-point linkage for agricultural tractor (recommended tractor weight: at least 5,000 kg) Bjdpey Iwwijfx Adweww Manual lever controls Road lights for signaling, fork-liftable, support legs

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without edge reinforcement, the loading area slopes downwards by approx. 8° after the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend as a cable guide - flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Trailer hitch Trailer hitch ball head D24.8:, trailer load 2,800 kg, incl. mounting and electrical system with 7-pole socket Accessories/Conversions 2 holders for wheel chocks, aluminum side impact protection, foldable - to be taken over from the truck! Steel under-run protection, quarter-shell mudguards with mud flaps - to be taken over from the truck! Storage box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 bracket for 3 x petrol cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with a polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing collars on the back (splash-proof according to technical possibility) Electrical system Adjustment of the existing tail lights, 2 additional LED work lights, recessed in the front panel switched via parking lights with a switch on the front panel, outside on the front left, 1 LED work light, at the rear, with integrated rear view camera Incl. with color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage converter 24/12V, 1 7-pole 12V socket = adapter plug Floor Bwsdpfx Asi Riytodwjw Mega Grip made of interlocking, galvanized grating, steel grating 50/4 Incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, running continuously over the entire main frame platform Tie-down rings 12 pairs of tie-down rings in the outer frame, freely pivotable - 10 tons each. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the middle of the floor, 5 tons each Front panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. 2 x 12 lifting brackets for tie-down chains, mounted on the left and right on the front panel Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle on the front panel, operated with a remote control, cable length min. 35 m x 9.5 mm, with cable window, with cable pressure plate, incl. overload protection, cable free-running coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer's test report, test book, operating instructions Ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair, electro-hydraulically foldable and laterally movable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp support made of steel grating, hot-dip galvanized, with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp prepared for operation on a loading ramp with full load capacity. Ramp locking with 2 lashing straps. Ramp tip offset (nose min. 150 mm) suitable for resting on loading ramps. Labeling of the ramp operation. Lowering brake valve for lowering the ramp Support Adjustable support legs, foldable at the rear + length adjustable,

Condition: used, Year of construction: 1979, operating hours: 2,956 h, power: 59 kW (80.22 HP), Equipment: all wheel drive, cabin, front linkage, * Deutz DX 85 * All-wheel drive 4x4 * Front hydraulics * Front lift * Power steering * New clutch * Recently serviced * Operating hours: 56 Bwedpfe Adwftsx Adwew * Year of manufacture: 1979 * In good condition * Austrian vehicle registration document * Working hours: Monday to Friday, 7:30 AM - 12:00 PM, 1:00 PM - 6:00 PM, Saturday 7:30 AM - 5:00 PM. * E-mail: * Tel/WhatsApp/Viber: Alexandar Ilic * Tel/WhatsApp/Viber (English): Magdalena Ilic

Condition: used, Young used trailers from our large rental fleet! Used car trailer, twin axle, with aluminium side panels Manufacturer: Hapert Model: Azure L-2 Perm. total weight: 2000 kg Unladen weight: approx. 430 kg Payload: approx. 1570 kg (payload figure may vary depending on equipment and design) Internal dimensions: 3000 x 1500 x 400 mm (L x W x H) Tyres: 185R 13 Designed hinge system for easy attachment of load securing nets Multiplex wooden floor with 15 mm anti-slip surface Bwjdpfx Adey Na Awswow TÜV-certified and integrated load securing system Bolted V-drawbar Fully welded, hot-dip galvanised chassis Solid foldable jockey wheel Removable 40 cm high front grill for transporting long materials Aluminium side panels Aluminium tailgate with HAPERT locking system First registration: 02.05.2025 Workshop inspected New TÜV possible on request Possible further options and accessories for this trailer: - Rear supports - Anti-theft device - Load securing net

Condition: used, Year of construction: 2016, Equipment: cabin, Ref: 7556 Precise working width: 7.5 m Bwsdpfx Adezvq N Sjwow Working width: 8 m Delivery time (in days): 1 Hydraulic folding

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 8,500 h, Equipment: air conditioning, hydraulics, standard shovel, TRACKED EXCAVATOR VOLVO ECR 235 DL YEAR 2013 8500 HOURS AUXILIARY LINE SWIVELING DREDGE + BUCKET Bwjdpfezqu Dvjx Adwow LUBRICATION SYSTEM