Wheel loader

CATERPILLAR 962M Steering

Condition: new, empty load weight: 6,600 kg, maximum load weight: 17,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6600kg, permissible total weight: 24000kg, loading space length: 6,500 mmTire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, 3 axle low loader trailer with offset DTS-S 300 - bogie with strong ball bearing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - 1 spare wheel, same make as basic tires, steel rim - 1 plastic tool box - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks in the middle of the low load area - wooden planks 70mm for extension to 3000mm Lashing eyes low loader: - with spring jack Support axles + suspension: - SAF - drum brake axles - Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Brake system: - 2-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 volt, multi-chamber lights, yellow LED lighting on the side - 1 LED rotating beacon with holder, switched via parking light (light removable) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm Floor: - Storage box embedded in the crossing slope to the crank - then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area - Rear bevel with 70 mm softwood floor Loading ramps: Steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - - 1 pair of ring lashing eyes embedded on the crank at the front, 10 tonnes - 4 pairs of lashing holes in the AR with 5 tonnes each for tensioning belt attachment - 7 pairs Lashing eyes at the top and sides of the outer frame, 10 tonnes each - 1 x at the front on the crank, 6 x in the low bed - 5 pairs of stake pockets in the outer frame, inside 70x40 mm (can be converted to 5 tonne ring lashing eyes for an additional charge) - 2 pairs of additional folding lashing eyes, 10 tonnes each, 1x at the front on the crank, 1x behind the 3rd axle, axles + suspension: - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical Ac Hsdpfstcwkrox Agnsnp

Condition: used, mileage: 348,600 km, power: 375 kW (509.86 HP), first registration: 12/2017, fuel type: diesel, empty load weight: 14,500 kg, overall weight: 32,000 kg, tire size: 315/80 R22,5, axle configuration: 8x4, brakes: retarder, color: yellow, gearing type: automatic, suspension: steel-air, Equipment: ABS, additional headlights, cruise control, differential lock, low noise, parking heater, retarder, traction control, trailer coupling, Urea tank (AdBlue) Displacement 12,809 cc 50 trailer coupling Hydraulics (auxiliary drive) EBS Navigation system Euro 6 C Hsdpfsvk Un Ssx Agnjnp Payload 17,500 kg Automatic climate control Dautel round steel trough Hydraulic tailgate and swinging Fifth wheel plate Foldable underrun protection Sun visor Beacon lights Air + electricity for trailer operation Weights: SDAH trailer load: 18,000 kg Trailer trailer load: 55,000 kg Total train weight: 68,000 kg Tractor unit empty weight: 11,990 kg Total train weight: 64,0000 kg Errors excepted

Condition: good (used), functionality: fully functional, overall weight: 57,600 kg, axle configuration: 3 axles, loading space length: 7,240 mm, loading space width: 2,750 mm, loading space height: 945 mm, color: blue, Year of construction: 2008, We have two of these lowbed trailers available Hsdsxc U Nvepfx Agnenp Manufacturer: Goldhofer Type: STZ-VKL 3-34/80 A Year: 2008 Total weight: 54,000 kg Own weight: 21,000 kg Payload: 33,000 kg Overall train length: 20,000 mm (max. telescoped 24,200 mm) Loading area (LxW): 7,300 mm x 2,750 mm (telescopic up to 4,200 mm) Tires: 235/75 R 17.5 Extra: Extension beam: 2x 6,000 mm

Condition: used, mileage: 10 km, first registration: 06/2012, Equipment: crane, PAFLINGER PK18002-EHC/RADIO REMOTE CONTROL/GRAB-ROTATOR PREPARATION * High-mount * First owner * Crane was used 90% for lifting operations * 4 hydraulic extensions * Crane was mounted on an interchangeable console * Prepared for grab and rotator Hodpfey Eczujx Agnsnp * Radio remote control Photos = original condition If you require further information, feel free to contact me: Information is provided without guarantee; subject to change, prior sale, and errors excepted.

Condition: used, Year of construction: 1987, Liebherr 35 K stationary crane Hnjdpfx Agjpbvn Nonep With transport axles in very good condition

Condition: new, Year of construction: 2026, We have all Europe documents! We can delivery the trailers with FOB-EXW-CPT-CFR-CIF If you have an interest please contact with us; For European Countries; For African Countries; Hnjdpfxeqx Nd Re Agnep

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with angled front corners at 45° and rear taper of approximately 750 mm x 10° •3 pairs of lashing rings •Hardwood decking, 30 mm thick Extendable platform: •Extendable platform with rear taper of approximately 1,000 mm x 8° •Cutouts in the outer frame of the platform for attaching lashing straps •Hardwood decking approximately 48 mm thick, with chequered plate decking over the axles Two-piece steel ramps: •One pair of galvanized, two-piece steel ramps with approximately 48 mm thick hardwood decking •Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable •Maximum load per pair: approximately 40,000 kg Axles and tires: •BPW axles and suspension, 2 fixed axles, 1 steered axle •Technical axle load: 12,000 kg •Electro-magnetic reversing lock activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool Hnsdpfx Agjhlz S Nonop •235/75 R 17.5 3PMSF Braking system: •WABCO braking system according to EU regulations with EBS-E Paint finish: •First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component zinc dust primer •High-quality 2-component topcoat, single-color in MB 7350 Novagrau •Rear section metallized and painted in RAL 9010 Kingpin: •JOST kingpin with 2-speed gearbox for 24t lifting capacity (50t test load). Steel structure: •Steel structure made of high-strength fine-grain steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system according to EU regulations, lighting 24 volts •ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S and 15-pole sockets Included accessories: •One spare wheel with holder •One galvanized steel front bulkhead, approximately 400 mm high •Yellow-red air couplings on the galvanized connection strip at the front •4 chocks •One holder for a rotating beacon at the rear of the semi-trailer •Mounting in the rear area of the gooseneck for aluminum support ramps •Galvanized folding supports under the taper of the platform •Cover plates to bridge the gap between ramps and platform •White reflector tape according to EU regulations on the side, on the extension and at the rear in red •Electro-hydraulic unit at the rear, under the platform •On the gooseneck and on the ramps, one holder each on the left and right for warning signs including socket •Control valves for the ramps mounted on the right side of the semi-trailer •Aluminum side and rear walls on the gooseneck, approximately 2,440 x 400 mm •The rear, galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) •Four warning signs that extend by approximately 400 mm with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the platform •Extensions, galvanized, extendable by approximately 230 mm on each side •Square ladder rails 20 x 20 mm every 200 mm on the outer frame of the platform taper •A lacquered sand layer as an anti-slip coating on the chequered plates, over the kingpin and the platform •Load manometer for determining axle loads, including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel structure bead-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), mileage: 518,479 km, power: 353 kW (479.95 HP), first registration: 12/2009, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, suspension: other, loading space length: 6,200 mm, loading space width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, trailer coupling, = Further options and accessories = - Leaf spring suspension - Brake booster - Remote controlled central locking - Speed limiter - Tipping hydraulics - Refrigerator - Air suspension - Sun visor - Toolbox Hedpfx Aswwtl Ijgnjnp - Power take-off shaft (PTO) - Power take-off shaft (PTO) - Central lubrication - Tow bar = Remarks = MAN TGS 35 480 8x4 - 6 BL, Hydrodrive Hiab cran X - Hypro 232 - 5, YEAR 2020 , Only 680 Working hours, Remote controll, 5 hydraulic extensions, Rotor, Hydraulic Change system, Steel tipper and Platform Platform whit alu side boards and container locks 6.20m Alu board extension To loadlong material See pictures, Steel Tipperbox whit hydraulic board matic Top Condition !!! Austrian registration = Further information = Technical information Number of cylinders: 6 Gearbox Gearbox: ZF/ Pritarder, 16 gears, manual gearbox Axle configuration Front axle 1: Steered; Tire profile left: 80%; Tire profile right: 80%; Suspension: Leaf spring Front axle 2: Steered; Tire profile left: 80%; Tire profile right: 80%; Suspension: Leaf spring Rear axle 1: Dual tires; Differential lock; Tire profile left inside: 80%; Tire profile left outside: 80%; Tire profile right inside: 80%; Tire profile right outside: 80%; Suspension: Air suspension Rear axle 2: Lift axle; Steered; Tire profile left: 80%; Tire profile right: 80%; Suspension: air suspension Weights Empty weight: 15,780 kg Payload: 16,220 kg GVW: 32,000 kg Functional Lifting capacity: 5,700 kg Lifting height: 1,700 cm Crane: Hiab X - Hipro 232ES - 5, year of manufacture 2020, behind the cabin Brand of bodywork: SCHRAML Salzburg Condition Technical condition: very good Visual condition: very good More information Contact Gerrit Haverhoek or Piet Haverhoek for more information.

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Hsdpsv D Abtofx Agnenp

Condition: used, mileage: 309,077 km, power: 110 kW (149.56 HP), first registration: 09/2003, fuel type: diesel, empty load weight: 4,495 kg, maximum load weight: 2,995 kg, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, next inspection (TÜV): 04/2025, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. Haus, 1x air seat, rear window, electric mirrors, radio, ABS (anti-lock braking system), auxiliary drive, leaf spring suspension, tow bar, air and light tow bar Wheelbase: 3020 mm Body: Meiller 3-way tipping body, bulkhead, 700 mm axle ratio i = 4.300 (HL2/4/6), front axle 3.5 t, rear axle H2 6.2/7.2 t, crown gear 325, disc brakes front and rear, rear stabilizer bar under frame, G 56-6/6.29-0.78 transmission, Meiller 6-piston type 265, NA MB 56-1c countershaft i = 0.56, rear spring 4.6 t parabolic, front spring 3.2 t parabolic. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - . Hodsv Iq Nmopfx Agnsnp