Hay technology

Fortschritt E 303 - Schwadmäher

Condition: used, power: 59 kW (80.22 HP), Equipment: cabin, Maize header_____Self-propelled forage harvester with one cutting unit, Progress E296 field forage header or Progress E294 pick-up (photo) or Progress E299 maize header, fully serviced, new batteries, new paint scheme, all units are ready for use, models up to 1990 are available. Individual information is requested! Delivery possible!, Storage location: 17094 Pragsdorf Lsdji Iphzjpfx Aprjrl

Condition: new, empty load weight: 13,250 kg, maximum load weight: 47,550 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, suspension: air, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform in extendable version: Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: Ledjl Uxdkspfx Aprerl A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 40,000 kg Seat posts: JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 245/70 R 17.5 Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel end wall approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 4 restraining shoes with holder on the bulkhead One spare wheel with holder in front of the bulkhead Electro-hydraulic unit Re-steering from the front and rear by means of cable remote control operated via pushbuttons with tracking control of the axles Mounting in the rear area of the gooseneck for ALU docking lights European reflector plates (red/yellow) at the rear of the trailer White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red On the gooseneck and on the ramps on the left and right, a holder for the warning signs including a socket A bracket for a rotating beacon at the rear of the trailer Galvanized folding supports under the sloping loading area Operating valves for the ramps fitted on the right-hand side of the trailer Cover plates to bridge the gap between the ramps and the cargo bed A mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm The rear galvanized stanchions are removable Length of the body approx. 2,560 mm One tool box INOX 1,350 x 400 x 400 on the gooseneck Box covered oil filler plug 4 pairs of WADER container pockets in t

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, total width: 2,540 mm, total height: 3,780 mm, Year of construction: 2026, Equipment: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low loader * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630mm x 2,540mm x 3,780mm * Internal dimensions: 12,000mm x 2,540mm * Loading height: 890mm * Fifth wheel height: 1,230mm * Fifth wheel platform: 3,500mm * Low bed: 8,680mm * Gross weight: 48,000kg * Payload: 38,000kg * Tyres: 235/75R17.5 * SAF low-loader axles with lift and trailing steering axle * Air suspension with raise/lower function * Twin tyres * EBS brake system * 24-volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch kingpin * Chassis frame hot-dip galvanized by immersion * Heavy-duty, welded chassis frame * Climbing strips on the ramp incline * 50mm softwood floor * Recess for excavator arm * 3m equipment package * Steel toolbox under the loading platform * Gooseneck with 400mm front wall * 400mm aluminium side drop-down boards Lrodpsr Ic Rwjfx Aprsl * Front storage box with lid * 3 pairs of 6t lashing rings * 3 pairs of 3t lashing rings * 5 pairs of 10t lashing rings * 6 pairs of 3t lashing rings * 6 pairs of 2t lashing rings * Ramps with rubber covering * Spare wheel with holder on the front wall * LED reversing lights * Visible surface painting available upon request * Further equipment options possible upon agreement ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right of prior sale, as this item is also listed on other platforms. We strongly recommend a viewing and inspection to ensure the buyer has a clear understanding of the condition and suitability of the trailer. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! The internal dimensions provided are approximate. For new vehicles, additional costs for freight and documentation may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:00 to 17:00, Saturday 8:00 to 14:00 Always over 500 new and used trailers in stock!!! Tel.: Fax:

Condition: new, Year of construction: 2026, Metal tray Bale wrapper Z529 Lrjdpjhlr Sxjfx Aprel self-loading Length: 2220mm width: 1420mm height: 2650mm Own weight: 780kg Tractor hitch: three-point hitch Machine drive: hydraulic Tractor power: 60KW Empfolene delivery capacity of the tractor pump: 26l/min Empfolener hydraulic pressure: 14 MPa Bale size 1200mm - 1500mm Film width: 750mm Standard equipment: 3-point hitch Film cutter Film pre-stretcher 750mm Manual control panel Semi-automatic or fully automatic wrapping process The Z529 bale wrapper is a machine that is suspended from the front or rear three-point linkage of the tractor. It is loaded from below by means of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm rotating around the bale with an attached film feeder, which coats the bale rotating on the rollers with film. Once the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a push button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. It takes about two minutes to wrap a bale with a diameter of 1200 mm. The compact dimensions of the machines allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feeder, a hydraulically driven film cutter and the control panel. As an option, the machine can be equipped with a hydraulic bale placer, which allows the wrapped bale to be placed on its base. ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to prior sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Illustrations similar, may contain accessories subject to a surcharge. The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-INS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00 always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, maximum load weight: 37,640 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/2014, next inspection (TÜV): 02/2026, loading space length: 9,230 mm, loading space width: 2,550 mm, loading space height: 900 mm, loading space volume: 21 m³, Equipment: ABS, * 2-line air connection * Rear support * Front landing gear * ABS * Lift axle * SAF axles ---- Structure: Kaessbohrer LB4E EX-1 KK Lowbed semi-trailer (2,350 mm/Gooseneck + 9,230 mm/Deck), loading height approx. 900 mm, extendable width up to 3,160 mm, extendable in 12 stages to a total length of 19,575 mm / Min. deck length 12,000 mm, max. 18,000 mm., 3rd and 4th axles with trailing steering, loading ramps - ALU. Steel/wood floor, lashing rings, twistlock mounts. Ljdew Ririspfx Aprsrl Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see imprint) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions.

Condition: used, Year of construction: 2017, gearing type: other, first registration: 01/2017, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Construction: Rear axle, fire damage! The vehicle had a mileage of approximately 100,000 km! Lredpfop R Szlex Aprel Other parts are also for sale individually! - Manual transmission: EUR 5,000 - Transfer case: EUR 4,500 - Frame: EUR 2,000 Truck chassis no. WMA80SZZ7HM729331. ACCESSORIES INFORMATION IS SUBJECT TO SUBSCRIPTION. Subject to change, prior sale, and errors! - .

Condition: used, maximum load weight: 1,635 kg, overall weight: 2,700 kg, axle configuration: 1 axle, first registration: 11/2002, loading space length: 2,300 mm, loading space width: 1,650 mm, loading space height: 2,300 mm, total width: 2,250 mm, total height: 2,870 mm, Year of construction: 2002, Böckmann DUO with carriage platform Carriage trailer 2-horse trailer Horse transporter Livestock trailer 100 km/h Poly roof Carriage platform ALU side walls Central partition with length-adjustable chest and rear bars Wooden floor EZ: 06.11.2002 HU: 09/2025 Total weight: 2700 kg Empty weight: 1065 kg Payload: 1635 kg Overall dimensions: 5730mm x 2250mm x 2870mm Inner dimensions: approx. 2300mm x 1650mm x 2300mm Side windows left and right V-drawbar Steel rims Tarpaulin blind Side step protection Rubber floor in loading area Rubber floor on loading flap Manual support wheel Hook for Carriage fork ?Always over 30 new and used trailers in stock ATTENTION !!!!! MUST READ !!!!! Lredpfsm Ttb Iox Aprjl We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 9 a.m. to 5 p.m., Saturday 9 a.m. to 2 p.m. Always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, machine/vehicle number: 24410-72875710254, _____2,5m Pusher bucket with drawbar triangle for tractors, rear-mounted,Storage location:17094 Pragsdorf Lodpsi Ipiqefx Aprsrl

Condition: used, maximum load weight: 43,860 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 01/2020, loading space length: 18,640 mm, loading space width: 3,250 mm, loading space height: 890 mm, total width: 2,750 mm, total height: 355 mm, Year of construction: 2020, Equipment: ABS, Kaessbohrer LB4E Semi Low Loader First registered in 2020 BPW Eco Plus axles 1 lift axle 2 last axles self-steering Drum brakes ABS/EBS Tyres: 245/70 R17.5 34/40% Air suspension Gross weight: 58,000 kg, unladen weight: 14,140 kg, payload: 43,860 kg. Neck length: 3.40 m Low bed length: 9.24 m + 6.00 m extendable Total loading length: 18.60 m Width: 2.75 m + 2x30 cm Loading platform height: 89 cm Hydraulic ramps 2 rear supports Lrodpfx Apsx Ianqerol Lashing rings 24V powerpack for ramp hydraulics Subject to errors, typos, and prior sale.

Condition: used, working width: 400 mm, Equipment: crop cutter, Cutterbar_____Field forage cutterbar, uncut, transport wagon,Storage location:17094 Pragsdorf Lrsdpoi Iq Adsfx Aprsl