Silage chopper

Fortschritt E 281+Maisschneidwerk

Condition: new, maximum load weight: 549 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,500 mm, loading space width: 1,420 mm, loading space height: 350 mm, loading space volume: 1.4 m³, color: other, construction height: 960 mm, working width: 1,490 mm, Manufacturer: Brenderup Type: Brenderup 3251T, 3251ST UB flatbed trailer, steel Permissible total weight: 750 kg, tandem axle, unbraked Payload: 549 kg Unladen weight: 201 kg Box dimensions: 2500 x 1420 x 350 mm Tires: 10 inches Loading height: 610 mm All side panels can be removed and folded down Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Unsinn and Neptun Upon request, we will provide you with a free temporary registration plate for transport. Nedjd T Szuepfx Adhewl We repair trailers from all manufacturers. Further accessories available upon request. Subject to technical changes, price changes and errors. No liability is accepted for errors and printing errors. Rubber spring axle, support wheel, hot-dip galvanized, unbraked, including warranty. Brenderup uses galvanized components that optimally protect the trailer against rust. User-friendly latches, the tarpaulin buttons are attached to the trailer as standard. V-shaped drawbar, 4 x internally mounted lashing eyes, 13-pole plug with reversing light.

Condition: new, empty load weight: 218 kg, maximum load weight: 532 kg, overall weight: 750 kg, loading space length: 3,050 mm, loading space width: 1,660 mm, loading space height: 100 mm, loading space volume: 0.5 m³, color: other, construction height: 900 mm, working width: 2,150 mm, Manufacturer: Neptun Type: Multipurpose trailer GN152, N7-305 multi Permissible total weight: 750 kg Payload: 532 kg Unladen weight: 218 kg Box dimensions: 3050 x 1660 x 100 mm Tires: 155 70 R13 74N Loading height: 450 mm Tilting loading area - High structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame, and 5 cross members. - Tilting platform facilitates loading and unloading. - Reinforced drawbar, individual wheel suspension, and axle rubber elements ensure safe and stable driving. - The platform of the 305 multi model has side-mounted tail lights, so when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm. The following options are available: - 3-sided sideboards, height: 20 cm, made of 1.5 mm sheet metal and hot-dip galvanized. - Leaf guard grid, 80 cm high. - Winch mounted on the front of the trailer for pulling heavy loads, vehicles, or quads, lifting element for tilting platform. Njdevdi Hvjpfx Adhjwl Price includes vehicle registration document (Part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Cheval, Liberte, Hapert, Brian James Trailers. Upon request, we will provide you with a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories are available on request. Subject to technical changes, price changes, and errors. No liability is accepted for errors and printing errors. Rubber spring axle, individual wheel suspension, and axle rubber elements ensure safe and stable driving, tilting loading area, support wheel, marker lights, hot-dip galvanized, braked, including warranty, high structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame, and 5 cross members, tilting platform facilitates loading and unloading, the drawbar is reinforced, the platform of the 305 multi model has side-mounted tail lights, so when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm.

Condition: used, Year of construction: 2020, Powertilt or swing motor for Wacker ET65 / EW65 Manufacturer: Lehnhoff hydraulic quick coupler HS-03H PTS070 for excavator class 5-7t, Nwsdpfxjt Hnckj Adhol installed on excavator: Wacker - Neuson ET65 + EW65, slew angle 2 x 90° pin diameter: 50 mm, stick width: 195 mm, pin center-to-center distance: 370 mm, multiple units available, Advantages: * Enormous working range: up to 2 x 90° slew angle on both sides (180°) * Includes rotary feedthrough for hydraulics * Swing motor sealed and protected against damage * High holding forces and robust design for toughest operations * Compatible with all Lehnhoff quick couplers * Combines all the advantages of a quick coupler with a swing motor. Versatile operation with all types of buckets, including narrow buckets. The Lehmatic Powertilt is the ideal solution, e.g. for: * Canal construction work * Targeted material backfilling

Condition: new, empty load weight: 304 kg, maximum load weight: 996 kg, overall weight: 1,300 kg, loading space length: 3,050 mm, loading space width: 1,660 mm, loading space height: 100 mm, loading space volume: 0.5 m³, color: other, construction height: 810 mm, working width: 2,260 mm, Manufacturer: Neptun, Type: Multipurpose trailer GN155, N13-305, multi, Permissible total weight: 1300 kg, braked, Payload: 996 kg, Tare weight: 304 kg, Box dimensions: 3050 x 1660 x 100 mm, Tires: 185 R14C, Loading height: 450 mm, Tilting loading area. - High structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame and 5 cross members. - Tilting platform facilitates loading and unloading. - Reinforced drawbar, single-wheel suspension and axle rubber elements ensure safe and stable driving. - The platform of the 305 multi model has laterally positioned tail lights, so that when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm. The following options are available: - 3-sided sideboards, height: 20 cm, made of 1.5 mm sheet metal and hot-dip galvanized - Leaf grid, 80 cm high Nedpfx Adeuy Hu Tohswl - Winch mounted on the front of the trailer for pulling in heavy loads, vehicles or quads, lifting element for the tilting platform. Price includes vehicle registration certificate (Part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Cheval Liberte, Hapert, Brian James Trailers. Upon request, we will provide you with a free temporary registration plate. We repair trailers of all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability for errors and printing errors. Rubber suspension axle, single-wheel suspension and axle rubber elements ensure safe and stable driving, tilting loading area, support wheel, marker lights, hot-dip galvanized, braked, including warranty, high structural strength due to a fully welded frame, cold-bent side panels of the U-profile frame and 5 cross members, tilting platform facilitates loading and unloading, reinforced drawbar, the platform of the 305 multi model has laterally positioned tail lights, so that when tilting backwards, the transported vehicle can be loaded directly without ramps. The platform threshold is only 4 cm.

Condition: new, Year of construction: 2026, Metal-Fach Bale Wrapper Z529 self-loading Length: 2220mm Width: 1420mm Height: 2650mm Weight: 780kg Tractor hitch: three-point linkage Machine drive: hydraulic Tractor power: 60KW Recommended flow rate of the tractor pump: 26 l/min Recommended hydraulic pressure: 14 MPa Bale size: 1200mm - 1500mm Film width: 750mm Standard equipment: Three-point linkage Film cutter Film pre-stretcher 750mm Manual control panel Semi-automatic or fully automatic wrapping process Njdohlr Sxepfx Adhewl The Z529 bale wrapper is a machine that is attached to the front or rear three-point linkage of the tractor. It is loaded from below, which is done with the help of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm that rotates around the bale and has an attached film feed, which coats the bale rotating on the rollers with film. After the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. Wrapping a bale with a diameter of 1200 mm takes about two minutes. The compact dimensions of the machine allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feed, a hydraulically driven film cutter, and the control panel. Optionally, the machine can be equipped with a hydraulic bale unloader, which enables the placement of the wrapped bale on its base. ATTENTION!!!!! READ CAREFULLY!!!!! We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. We strongly recommend an inspection and examination so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after prior arrangement!!! Images are similar and may include optional accessories that are subject to an additional charge. The specified internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8.30 am to 5.00 pm, Saturday 8.30 am to 2.00 pm Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, mileage: 1,001 km, gearing type: other, color: yellow, driver cabin: other, Vehicle location: Bovenden. Equipment: MULTIPLE VIBRATORY PLATES AVAILABLE. Various vibratory plates in stock, including DEMAG/WACKER models, e.g., with Hatz engines. 6 units available, priced between EUR 300 and EUR 500 plus VAT. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Njdpfxsi Rpl Do Adhewl

Condition: used, overall weight: 1,200 kg, At ANHÄNGERWIRTZ, many models are available online. Convenient online shopping around the clock at trailershop.de Pick up yourself or have delivered. The online pick-up market for your new trailer offers leading brand manufacturers! over 850 new trailers in stock over 130 used trailers always available. Nwedpfx Aou I Nz Sodhol Non-binding example: Used open-bed low loader box trailer with removable side panels Approx. 35 cm high sides, front toolbox Rear support, jockey wheel, condition according to age and use No valid roadworthiness certificate (HU), ideal for DIY mechanics or hobbyists Trailer is roadworthy even without valid inspection (TÜV) Total length approx. 320 cm Loading area (L/W/H) approx. 2 x 1 m The trailer is sold as seen, requiring repairs! Sales and telephone order acceptance during the following hours: MON - FRI: 08:00–12:30 & 14:00–18:00 Copyright – Trademark protection used Heinemann Alu 1200 01/26

Condition: used, maximum load weight: 1,635 kg, overall weight: 2,700 kg, axle configuration: 1 axle, first registration: 11/2002, loading space length: 2,300 mm, loading space width: 1,650 mm, loading space height: 2,300 mm, total width: 2,250 mm, total height: 2,870 mm, Year of construction: 2002, Böckmann DUO with carriage platform Carriage trailer 2-horse trailer Horse transporter Livestock trailer 100 km/h Poly roof Carriage platform ALU side walls Central partition with length-adjustable chest and rear bars Wooden floor EZ: 06.11.2002 HU: 09/2025 Total weight: 2700 kg Empty weight: 1065 kg Payload: 1635 kg Overall dimensions: 5730mm x 2250mm x 2870mm Inner dimensions: approx. 2300mm x 1650mm x 2300mm Side windows left and right V-drawbar Steel rims Tarpaulin blind Side step protection Rubber floor in loading area Rubber floor on loading flap Manual support wheel Hook for Carriage fork ?Always over 30 new and used trailers in stock ATTENTION !!!!! MUST READ !!!!! Nwodpfx Ajm Ttb Iedhsl We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 9 a.m. to 5 p.m., Saturday 9 a.m. to 2 p.m. Always over 500 new and used trailers in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, machine/vehicle number: 24410-72875710254, 2.5m sliding blade with towing triangle for tractors, rear-mounted, location: 17094 Pragsdorf. Njdpfx Aoi Ipiqjdhowl

Condition: new, empty load weight: 140 kg, maximum load weight: 614 kg, overall weight: 750 kg, loading space length: 2,095 mm, loading space width: 1,050 mm, loading space height: 300 mm, loading space volume: 0.7 m³, color: blue, construction height: 1,600 mm, working width: 1,537 mm, Manufacturer: Humbaur Type: Startrailer Alu Permissible total weight: 750 kg Payload: 614 kg Unladen weight: 136 kg Box dimensions: 2050 x 1095 x 300 mm Tire size: 13 inches Loading height: 500 mm Includes 100 km/h approval Includes blue tarpaulin and 100 cm support bar Internal height - 13-pin connector - Side walls made of anodized, double-walled aluminum profile Nsdpfoh Uh Rgsx Adhswl - Fixed front wall and flap with sturdy fasteners - Tie-down eyes integrated into the side walls, tensile force 400 kg each - Tie-down eyes, Dekra certified - Multifunction lighting integrated into the underride guard - Corner posts with insertion options - Pre-assembled fastening buttons for tarpaulin attachment to the side walls Price includes vehicle registration document (registration certificate part II and COC documents) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we will provide you with a free transfer license plate. We repair trailers from all manufacturers. Additional accessories available upon request. Subject to technical changes, price changes and errors. No liability is accepted for errors and printing errors. Rubber spring axle, single-wheel suspension, high tarpaulin, hot-dip galvanizing, unbraked, including warranty, 13-pin connector, side walls made of anodized, double-walled aluminum profile, fixed front wall and flap with sturdy fasteners, tie-down eyes integrated into the side walls, tensile force 400 kg each, tie-down eyes, Dekra certified, multifunction lighting integrated into the underride guard, corner posts with insertion options, pre-assembled fastening buttons for tarpaulin attachment to the side walls.