Low loader semitrailer

DOLL Tiefbett T2H-S3FS21

Condition: used, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 05/2021, loading space length: 6,850 mm, loading space width: 25,400 mm, loading space height: 350 mm, tire size: 245/70 R 17.5, color: grey, Year of construction: 2021, Equipment: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,785 mm long - Gooseneck hydraulically liftable/lowerable as well as detachable - Technical kingpin load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Area: - Low-bed with external beams in extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed section with fixed hardwood floor, approx. 40 mm thick, and pneumatically actuated locking mechanism - Supply lines are protected inside the extendable beams and automatically adapt to the respective length of the low-bed - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD lashing rings Rear Chassis: - Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles and Tyres: - Pendulum axles, all axles hydro-mechanically forcibly steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and positioning pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Axle tool kit - Tyres: 245/70 R 17.5 Braking System: - Braking system compliant with EU regulations with EBS-E, without connection lines to the tractor unit Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer - Rear section metallized and painted in RAL 9010 Included Accessories: - Prepared for bolted container locks for 1x 20' or 1x 40' containers on the external beams - One galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 2 wheel chocks with holder on the front wall - Rear steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - On the gooseneck and on the rear plate, left and right, a holder for warning panels incl. socket - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable Isdpfsrtqylox Afdja - 5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area, 2 pairs in the outer frame of the chassis - Folding extensions, approx. 230 mm per side - 1 pair of steel ramps for bridging the low-bed mounting hooks - 80 km/h speed stickers at the rear and on both sides - On the warning boards, a mount for a revolving beacon - Radio remote control for rear steering in addition to the cable remote, with LED indicators on the receiver as single-track control - Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump - Excavator dipper trough at the rear chassis closed at the rear with a plug-in plate

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. Isdpfjkqmuujx Afdsa 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval.

Condition: new, maximum load weight: 29,100 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, English text below * DOLL panther chassis + 5-year guarantee * DOLL tronic operating and control system including radio remote control * Hydraulically retractable gooseneck * External main frame * Hydraulic steering * Extensive load securing package * Low bed length: 12,362mm (6,700mm + 5,662mm) * Total length: 13,110mm (+5,662mm) * Dead weight: 12,900kg (+/- 2%) * Optional extensive accessories This trailer is also available with a low bed length of 6,100mm and a short delivery time. Images may differ from the original. Iedpfxjgvhrro Afdja Information without guarantee. Contact: Tel.: * DOLL panther running gear + 5-Year warranty * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Lateral main frame *Hydraulic steering * Comprehensive load-securing package * Low bed length: 12,362 mm (6,700 + 5,662 mm) * Total length: 13,110 mm (+5,662 mm) * Tare weight: 12,900 kg (+/- 2%) * Optional comprehensive equipment This trailer is also available with a low bed length of 6,100mm and a short delivery time. Pictures might be different from the original. Information provided without guarantee. Contact: Phone:

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 9,700 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 210 mm, Year of construction: 2025, Equipment: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic control and operating system incl. radio remote control * Additional steering via radio remote control * Position-independent single-track steering EEP * Hydraulic steering * Comprehensive load securing package * Spray galvanization * Stainless steel toolbox * Side wall construction * Reinforced chassis platform * Rear ramp * Extremely low loading height * Low-bed length: 9,200 mm (9,700 mm incl. loading ramps from low-bed to running gear) Iodpfxegqc Dye Afdsa * Overall length: 16,560 mm * Tare weight: 10,500 kg (+/- 2%) Images may differ from the original. Information subject to change without notice.

Condition: new, maximum load weight: 47,300 kg, overall weight: 63,000 kg, axle configuration: 3 axles, EuroCompact FL 03 Extendable Flatbed with Pendulum Axles Weights, Speed 80 km/h Fifth wheel load: 27,000 kg Axle load: 3 x 12,000 kg Gross vehicle weight rating: 63,000 kg Curb weight approx. 15,700 kg Payload: 47,300 kg Iodpfx Aoxl N Edefdoa Gooseneck length x width: 3,700 mm x 2,480 mm Coupling height (laden): 1,300 mm Articulation radius front: 1,350 mm Articulation radius rear: 2,800 mm King pin: 3.5 inch or 2 inch Fifth wheel load: 27,000 kg Lowered bed, single telescopic extension Length x width: 7,610 mm + 5,000 mm = 12,610 mm Telescopic extension up to 5,000 mm / deck height 225 mm Loading height (laden): approx. 325 mm Lowered bed width: 2,540 mm, extendable to 3,000 mm 3-axle rear chassis, wheelbase 1360 + 1360 mm, single tires 245/70 R 17.5 with BPW pendulum axles, 12-14 t axle load Excavator boom recess Loading height: 860 mm Lift height: 650 mm Length: 4,060 mm Steering: forced steering Radio remote control for all functions Central lubrication system

Condition: used, maximum load weight: 75,700 kg, overall weight: 93,200 kg, axle configuration: > 3 axles, first registration: 06/2008, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 885 mm, tire size: 245/70 R17.5, color: beige, Year of construction: 2008, Gooseneck, rigid, in central beam design: - Loading area: 3,700 mm x 2,480 mm - Angled at 10°, front corners at 45° (1,080 mm long, 190 mm high bevel at the gooseneck end) - Closed outer frame - Max. fifth wheel load: 26,000 kg - Clearance radius: 2,700 mm - 2" kingpin - Wooden floor - Hydraulically operated landing legs - 1-piece aluminium sideboards, 400 mm high, closed on 3 sides incl. rear board, stanchions foldable and removable - 2 pairs of lashing points LC 8,000 daN Loading area: - Simple telescopic extension, continuous over the running gear - External/internal tube construction with 1,090 mm fixed loading platform at the front - (L x W) 8,700 mm x 2,550 mm, extendable by 6,700 mm to a max. of 15,400 mm - Steel plate flooring - Locking of extension stages by spring-applied cylinder and tapered pin - Vehicle optimized for maximum extension - 7 pairs of lashing points LC 13,000 daN - 6 pairs of lashing points LC 6,000 daN - 6 pairs of stanchion pockets 100 x 50 mm (LC 2,000 daN) 6-axle running gear: - 1 rigid axle, 5 forced-steered axles - Axle brand SAF - Track width: 2,550 mm - 1st axle: load-dependent lift axle - 2nd axle: manually liftable (not load-dependent) - Wheelbase, starting from first axle: 1,310 mm - Twin tires 245/70 R 17.5 - Air suspension, 200 mm lift - Ride height: 885 mm +100 mm / -100 mm - 2nd ride height: 845 mm +140 mm / -60 mm - Floor covering: steel/wood Rear of vehicle: - Design: "Bevelled" (600 mm long, 10° bevel) - 1,000 mm rear overhang from center of last axle - Detachable ramp eye on rear crossmember Iedpfsxp U Tzex Afdoa - Mechanical support for stabilisation during loading - 1 pair of lashing points LC 6,000 daN - 1 pair of lashing points LC 13,000 daN Ramps: - Two-piece access ramps with lengths of 2,850 mm + 1,540 mm, width 720 mm - Hydraulic ramp lifting device - SuperGrip rubber flooring - Climbing strips on outer side of ramps 20 mm x 20 mm x 100 mm - Laterally adjustable by hydraulic cylinder to a maximum outer width of 2,790 mm or minimum inner spacing of 480 mm - Integrated mechanical locking system in ramp lift cylinder for ramp safety during transport - Mount for warning beacon Hydraulics: - Hydraulic connection for tractor unit (1 set), connections for tractor, hydraulic pump in tractor unit with max. 60 l/min flow - Hydraulic emergency hand pump - Electro-hydraulic power pack Trailing steering: - Trailing steering bottle for manual steering of trailer axles via cable remote control, spiral cable extendable from 1.5 m to 5 m Accessories included: - Spare wheel holder at the front of the gooseneck, plug-in type, galvanized - Stanchion holder on the gooseneck - 2 pairs warning signs, approx. 423 mm x 423 mm - Widening including extension boards, attachable extension at vehicle rear - 1 pair wheel chocks with holder - 1 spare wheel - Central lubrication system with 2 lubrication pumps - Single-color paint finish, RAL-1001 Beige