Open semitrailer with tarp

Schmitz Cargobull Curtainsider Standard Staplerhalterung Getränke

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame extensions and a low-bed without a rear slope - Frame neck + kingpin plate 225 mm - Low-bed designed for a point load of 25 tons over 5 m - Outer frame closed on the outside with welded lashing rings for securing cargo - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tires: - BPW low-loader axles, 10 tons axle load each, air spring diameter 360 mm - Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically steered via the fifth wheel coupling Floor: - Multi-layer glued panel floor with a thickness of 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 tons – 6 pairs in the low-bed and one pair each on the gooseneck and at the front of the rear section – 2 pairs of lashing rings 4 tons on the gooseneck and rear section) - 6 pairs of mushroom-shaped load securing points in the outer frame in the low-bed - Storage compartment with lid in the floor of the low-bed, front left and right Front Wall: - 25 mm aluminum hollow profiles extending up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal straps (spacing approx. 600 mm) and stainless steel tensioning closures - Adjustable tarpaulin straps (over center) up to a loading width of 4,000 mm, including tarpaulin extension with snap buttons and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Incl. eyelets for a loose tarpaulin extension part - 1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low-bed at the front extension - With strap pockets Rear Wall: - Steel rear portal frame with lateral tarpaulin mounting device - Aluminum double-wing door, 25 mm thick - Both door wings can be fully folded in with door latch - One aluminum double-hinge hinge and two recessed handle recesses per door wing Front Corner Posts: - At roof height, screwed on at the front end Intermediate Posts: - 3 pairs of steplessly adjustable folding posts - The posts can be moved along the entire length using roller carriages Hodpfoiu Eu Nex Ahkow - Intermediate posts can also be fixed in the rear platform in the low-bed Roof: - EDSCHA sliding tarpaulin (galvanized) with crossmember that can be moved in both directions (pushed forward together in the loading area) - Rear portal crossbar can be swung out - PVC tarpaulin roof without customs closure - Manually hydraulic lifting roof on both sides, stroke 450 mm - Lifting roof can be operated in the front (9x50) and rear (9x50) elevated positions - Including tarpaulin extension and tarpaulin rail at the rear - Tarpaulin can be extended by 900 mm at the front end wall Accessories: - Extendable warning signs (removable at the rear and front with socket) incl. position lights up to a loading width of 4,000 mm - Storage of the 4 warning signs on the front wall, inside, top right and left - 1 aluminum ladder with bracket 2,500 mm long on the front wall - 2 rows of aluminum slats self-locking - Sheet metal mudguard

Condition: used, axle configuration: > 3 axles, first registration: 09/2010, loading space length: 9,030 mm, loading space width: 2,540 mm, loading space height: 820 mm, total length: 13,850 mm, total width: 2,540 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 8,630 mm, color: red, Equipment: ABS, Nooteboom MCO-50-04V 4 x steering axles. BPW axles. Remote steering with cable. 95 cm coupling height. Total length extended: 26.53 m. Loading bed: 903 cm + 650 cm + 650 cm. Loading height (loaded) 82.5 cm. = Further Information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Weights Unladen weight: 14,960 kg Payload: 33,440 kg GVWR: 48,400 kg Identification Model number: MCO-50-04V / 25MTR / 2X EXTENDABLE = Company Information = Hjdpfx Aoyf A Srshkow ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2015, next inspection (TÜV): 03/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2015, Equipment: ABS, Equipment: Air suspension Hsdpfx Aheyvw Dxokew * Lift axle * BPW axles Safety: ABS * EBS * Disc brakes Tyres: * 385/65 R 255 * approx. 50% * Rims ET 120

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2010, loading space length: 13,580 mm, loading space width: 2,490 mm, loading space height: 2,980 mm, total length: 13,910 mm, total width: 2,550 mm, suspension: air, tire size: 435/50R 19.5, tire condition: 20 %, wheelbase: 8,750 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = General information Hjdoz Iydtepfx Ahksw Year of construction: 2010 Registration number: OK-96-ZZ Axle configuration Tyre size: 435/50R 19.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.840 kg Carrying capacity: 31.160 kg GVW: 39.000 kg

Condition: used, empty load weight: 6,760 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, suspension: air, tire size: 385/65 R22,5, Kögel SN24 3-axle standard curtainsider, equipped with a pallet box, lift axle, and toolbox, with a sliding tarpaulin. SAF axles. Silver, neutral-colored tarpaulin. Sale exclusively to commercial businesses, with all warranties excluded. Subject to errors and prior sale. Hsdpfx Ahjzlq Dbeksw

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2014, Equipment: ABS, Visit our website, where you will find our complete inventory with many more photos and information in several languages. SEL 8969 Schwarzmüller S1 EDSCHA | Coil liner OVERVIEW First registration: 09.12.2014 Registration country: Germany Color: White SPECIFICATIONS Technically permissible total weight (kg): 48,000 Permissible total weight (kg): 42,000 Unladen weight (kg): 7,840 VIN: VAVWS1348EH346240 TIRES AND AXLES Axle configuration: 3 axles Axle 1: 425/65 R 22.5 | Air suspension | Disc brake | Manufacturer: BPW Axle 2: 425/65 R 22.5 | Air suspension | Disc brake | Manufacturer: BPW Axle 3: 425/65 R 22.5 | Air suspension | Disc brake | Manufacturer: BPW OTHER SPECIFICATIONS EDSCHA Coil liner BODY Internal dimensions Height (m): 2.36 Width (m): 2.48 Hedpfx As Agqtxshksw Length (m): 11.24 VEHICLE DOCUMENTS & INSPECTION Vehicle documents: Germany Registration certificate I Vehicle title Without COC Applying for the COC from the manufacturer costs €250 plus express courier shipping costs. Please note that manufacturers do not issue a COC for all vehicles, and when they do, it always refers to the vehicle’s condition upon delivery from the factory. Additional documents available upon request for an extra charge. Next inspection (HU): 01.2027 Next emissions test (SP): 08.2027 Our vehicles are sold as is, in their current condition. We invite customers to visit our company to personally inspect the vehicle’s condition. We also offer the option of a test drive. Please note that the batteries included with the vehicle are the ones currently installed. If the customer wishes for new batteries, we are available to provide pricing information. CONTACT PERSONS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Liza Obodynska Ukrainian, Russian, English Jovana Marjanovic Bosnian, German, English j.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901011222, empty load weight: 5,741 kg, maximum load weight: 33,259 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,345 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 60 %, color: red, Gross/technical aggregate load: 24000 / 27000 kg Stated kingpin load perm./techn.: 11000 / 12000 kg Overall length approx.: 13850 mm Overall width max.: 2550 mm Overall height approx.: 3345 mm Platform length approx.: 13650 mm Hodpfxjzv Sq Re Ahkew Platform width approx.: 2480 mm Fifth-wheel height approx.: 950 mm Kingpin setting dimension approx.: 1680 mm Front corner dimension approx.: 2040 mm #Chassis - semi-trailer for haulage Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock-Profil" for lashing strap attachment (note: side boards must be opened to hook in the straps) "patentiertes Load-Lock-Cross" for lashing strap attachment, in the cross member beneath the outer frame 24 t 2-speed landing legs, single-side operation, straight foot, without shock absorber (rear swivel clearance approx. 1930 mm) Pull-out ladder at the rear 2 wheel chocks with holder Side underrun protection, aluminium Pallet box for 8 Euro pallets Front underrun protection, galvanised steel Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle 2 plastic tool boxes Container locks, 4 pairs recessed in the floor for 2 x 20 ft containers, distance between locks approx. 600 mm total, retractable type, without adapter, extendable to locking dimensions of 2760 mm and 2820 mm 2 rows of lashing/stake rails along the longitudinal beams, recessed centrally in the floor 7 lashing/stake rails transverse, recessed in the floor across the full width to the outer frame #Axles & Suspension SAF disc brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Air suspension #Braking System Two-line air braking system, colour-coded pipework for easy servicing Spring-actuated parking brake 2 mismatch-proof coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Electrics 24V multi-chamber lights, yellow LED side marker lights 2 x 7-pin mismatch-proof sockets at the front 2 additional LED work lamps 2 pairs of warning boards, double LED-illuminated, extendable to 3000 mm #Floor Phenolic-faced plywood flooring approx. 30 mm thick, on longitudinal sub-beams for high point load capacity, forklift axle load up to max. 7100 kg #Headboard / Front Corner Posts Hangler steel headboard approx. 2600 mm high, additionally lined inside with phenolic-faced plywood over the full height #Paintwork Frame hot-dip galvanised incl. passivation + outer frame top-coated in RAL 3000 fire red, 15-year warranty against corrosion perforation #Note The images are archive photos; the vehicle may currently be in use

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2017, loading space length: 13,620 mm, loading space width: 2,500 mm, total width: 2,550 mm, Equipment: ABS, Vehicle identification number: WKESD00000741985 CONTAINER LOCKING MECHANISMS PALLET BOX Tare weight: 6,430 kg DE HU due - SP 08.2026 BPWEcoPlus axles with disc brakes LIFT AXLE Recess pockets in the floor, WITHOUT stanchions Hsdpszhy Syefx Ahkew Hole strip on the side Toolbox Tires: 435/50 R 19.5 Spare wheel holder WITHOUT spare wheel Changes, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense of a purchase agreement. The description according to the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2007, next inspection (TÜV): 02/2007, loading space length: 13,350 mm, loading space width: 2,490 mm, loading space height: 2,640 mm, total width: 2,600 mm, total height: 4,030 mm, Year of construction: 2007, EKERI 3-axle Thermo Folding Wall Semi-Trailer * ATP Class FNA for deep-freeze transport, including certificate valid until 04-2025 * Tare weight: approx. 10,300 kg (according to vehicle registration document) * First registration: 02.02.2007 Overall condition: sufficient (4) MOT valid until: 05/2027 Inspection valid until: 11/2026 Chassis design: * 3 axles SAF with disc brakes * Air suspension, raise/lower function * Without lift axle * 6 tires 385/65R22.5, FL: 3 mm, FR: 3 mm, ML: 4 mm, MR: 4 mm, RL: 2 mm, RR: 2 mm * Steel rims with offset: 120 mm * Spring brake parking brake, 2 chocks with holder * Storage box made of stainless steel sheet * 2 spare wheel holders * Pallet box closed for 32 Euro pallets * Storage box in the rear, part of the under-run protection * Rear impact guard in the under-run protection * Lighting system with additional reversing lights in the rear * ADR folding warning sign, 2 yellow/orange rear reflector panels * 170 liter fuel tank for refrigeration unit Refrigerated box equipment: Loading area for 33 Euro/26 industrial pallets * Internal dimensions approx.: 13,350 mm long, 2,490 mm wide, 2,640 mm high * Internal width optimized for the transport of up to 43 CC roll containers * Side folding doors on the left side of the body, double-leaf with 10 folding elements each, aluminum-stainless steel door frames, stainless steel hinges and latches. The opening of the side doors begins approx. 80 mm behind the inside of the front wall; the total opening width of the side doors is approx. 13,150 mm; lateral through-loading height: 2,610 mm * Double-leaf rear doors with double rotating bar locking and cylinder locks * 1 pair of universal lashing rails partially embedded in the side walls and doors, approx. 1 m above the floor * Aluminum checkered plate floor * 2 rows of cargo securing rails fully embedded in the floor and mounted along the side walls or side doors * Aluminum base protection strips on the fixed side wall and front wall * Evaporator protection/recirculation frame on the inside of the front wall * Interior lighting in the cargo area * PVC tarpaulin air duct Saddle height: 1120 mm = 4,030 mm overall external height THERMO KING SL 200 30 Hsdjzhaplepfx Ahksw with diesel drive without electric drive Operating hours approx.: Diesel: 14900, Electric: approx. none. Total: 31410 TransScan temperature recorder Last service: 29.10.2025 Color: Chassis: red, Body: white, Signage: Perez Cargo Price information: Net price, plus VAT, offer non-binding Your contact persons: Horst Mevissen (DE, ENG) Tel.: Robert Enns (ENG, ESP, DE, FR), Tel.: 0049 Valerij Fuchs (RUS, DE), Tel.: 0049

Condition: new, maximum load weight: 29,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, Krone Profi Liner steel mesh semi-trailer, brand new! * Permissible total weight: 36,000 kg * Technical total weight: 39,000 kg * Tare weight: approx. 6,600 kg * Payload: approx. 29,400 kg * Loading area length: 13,620 mm * Loading area width: 2,480 mm * Saddle height unladen: approx. 1,150 mm * KRONE Profi Liner SDP 27 * New vehicle * Construction steel mesh version * 3 axles Hedpfx Aezf Td Dshkjw * Air suspension * Disc brakes * Lift axle * EBS with stability control system * Code XL certification * Multi Lock outer frame * Reinforced steel headboard * Side panels 750 mm, foldable and removable * Rear panel foldable and removable * 16 lightweight, insertable side rails with integrated strap guide * Multi-Lash lashing system * Additional tensioning devices for construction steel mesh * KRONE Telematics Premium * Tire pressure monitoring system (TPMS) * LED lighting * LED reversing lights * Tool box * Storage boxes * Overwidth equipment * M+S tires If you have any questions, please do not hesitate to contact us!