Open semitrailer

KRONE Profi Liner Stahlmattenauflieger fabrikneu

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame extensions and a low-bed without a rear slope - Frame neck + kingpin plate 225 mm - Low-bed designed for a point load of 25 tons over 5 m - Outer frame closed on the outside with welded lashing rings for securing cargo - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tires: - BPW low-loader axles, 10 tons axle load each, air spring diameter 360 mm - Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically steered via the fifth wheel coupling Floor: - Multi-layer glued panel floor with a thickness of 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 tons – 6 pairs in the low-bed and one pair each on the gooseneck and at the front of the rear section – 2 pairs of lashing rings 4 tons on the gooseneck and rear section) - 6 pairs of mushroom-shaped load securing points in the outer frame in the low-bed - Storage compartment with lid in the floor of the low-bed, front left and right Front Wall: - 25 mm aluminum hollow profiles extending up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal straps (spacing approx. 600 mm) and stainless steel tensioning closures - Adjustable tarpaulin straps (over center) up to a loading width of 4,000 mm, including tarpaulin extension with snap buttons and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Incl. eyelets for a loose tarpaulin extension part - 1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low-bed at the front extension - With strap pockets Rear Wall: - Steel rear portal frame with lateral tarpaulin mounting device Bwodpfx Aeiu Eu Nsgmou - Aluminum double-wing door, 25 mm thick - Both door wings can be fully folded in with door latch - One aluminum double-hinge hinge and two recessed handle recesses per door wing Front Corner Posts: - At roof height, screwed on at the front end Intermediate Posts: - 3 pairs of steplessly adjustable folding posts - The posts can be moved along the entire length using roller carriages - Intermediate posts can also be fixed in the rear platform in the low-bed Roof: - EDSCHA sliding tarpaulin (galvanized) with crossmember that can be moved in both directions (pushed forward together in the loading area) - Rear portal crossbar can be swung out - PVC tarpaulin roof without customs closure - Manually hydraulic lifting roof on both sides, stroke 450 mm - Lifting roof can be operated in the front (9x50) and rear (9x50) elevated positions - Including tarpaulin extension and tarpaulin rail at the rear - Tarpaulin can be extended by 900 mm at the front end wall Accessories: - Extendable warning signs (removable at the rear and front with socket) incl. position lights up to a loading width of 4,000 mm - Storage of the 4 warning signs on the front wall, inside, top right and left - 1 aluminum ladder with bracket 2,500 mm long on the front wall - 2 rows of aluminum slats self-locking - Sheet metal mudguard

Condition: used, axle configuration: > 3 axles, first registration: 09/2010, loading space length: 9,030 mm, loading space width: 2,540 mm, loading space height: 820 mm, total length: 13,850 mm, total width: 2,540 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 8,630 mm, color: red, Year of construction: 2010, Equipment: ABS, Nooteboom MCO-50-04V 4 x steering axles. BPW axles. Bjdpfx Agsyf A Srjmjwu Remote steering with cable. 95 cm coupling height. Total length extended: 26.53 m. Loading bed: 903 cm + 650 cm + 650 cm. Loading height (loaded) 82.5 cm. = Further Information = Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Weights Unladen weight: 14,960 kg Payload: 33,440 kg GVWR: 48,400 kg Identification Model number: MCO-50-04V / 25MTR / 2X EXTENDABLE = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, empty load weight: 6,760 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, suspension: air, tire size: 385/65 R22,5, Kögel SN24 3-axle standard curtainsider, equipped with a pallet box, lift axle, and toolbox, with a sliding tarpaulin. SAF axles. Silver, neutral-colored tarpaulin. Bwsdpszlq Dbsfx Agmeu Sale exclusively to commercial businesses, with all warranties excluded. Subject to errors and prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33901011222, empty load weight: 5,741 kg, maximum load weight: 33,259 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,345 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 60 %, color: red, Gross/technical aggregate load: 24000 / 27000 kg Bodpfx Agszv Sq Rjmjwu Stated kingpin load perm./techn.: 11000 / 12000 kg Overall length approx.: 13850 mm Overall width max.: 2550 mm Overall height approx.: 3345 mm Platform length approx.: 13650 mm Platform width approx.: 2480 mm Fifth-wheel height approx.: 950 mm Kingpin setting dimension approx.: 1680 mm Front corner dimension approx.: 2040 mm #Chassis - semi-trailer for haulage Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock-Profil" for lashing strap attachment (note: side boards must be opened to hook in the straps) "patentiertes Load-Lock-Cross" for lashing strap attachment, in the cross member beneath the outer frame 24 t 2-speed landing legs, single-side operation, straight foot, without shock absorber (rear swivel clearance approx. 1930 mm) Pull-out ladder at the rear 2 wheel chocks with holder Side underrun protection, aluminium Pallet box for 8 Euro pallets Front underrun protection, galvanised steel Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle 2 plastic tool boxes Container locks, 4 pairs recessed in the floor for 2 x 20 ft containers, distance between locks approx. 600 mm total, retractable type, without adapter, extendable to locking dimensions of 2760 mm and 2820 mm 2 rows of lashing/stake rails along the longitudinal beams, recessed centrally in the floor 7 lashing/stake rails transverse, recessed in the floor across the full width to the outer frame #Axles & Suspension SAF disc brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Air suspension #Braking System Two-line air braking system, colour-coded pipework for easy servicing Spring-actuated parking brake 2 mismatch-proof coupling heads at the front EBS electronic braking system with EBS socket at the front Lift-and-lower valve Vehicle stability system #Electrics 24V multi-chamber lights, yellow LED side marker lights 2 x 7-pin mismatch-proof sockets at the front 2 additional LED work lamps 2 pairs of warning boards, double LED-illuminated, extendable to 3000 mm #Floor Phenolic-faced plywood flooring approx. 30 mm thick, on longitudinal sub-beams for high point load capacity, forklift axle load up to max. 7100 kg #Headboard / Front Corner Posts Hangler steel headboard approx. 2600 mm high, additionally lined inside with phenolic-faced plywood over the full height #Paintwork Frame hot-dip galvanised incl. passivation + outer frame top-coated in RAL 3000 fire red, 15-year warranty against corrosion perforation #Note The images are archive photos; the vehicle may currently be in use

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2017, loading space length: 13,620 mm, loading space width: 2,500 mm, total width: 2,550 mm, Equipment: ABS, Vehicle identification number: WKESD00000741985 Bedpszhy Syjfx Agmewu CONTAINER LOCKING MECHANISMS PALLET BOX Tare weight: 6,430 kg DE HU due - SP 08.2026 BPWEcoPlus axles with disc brakes LIFT AXLE Recess pockets in the floor, WITHOUT stanchions Hole strip on the side Toolbox Tires: 435/50 R 19.5 Spare wheel holder WITHOUT spare wheel Changes, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense of a purchase agreement. The description according to the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2007, next inspection (TÜV): 02/2007, loading space length: 13,350 mm, loading space width: 2,490 mm, loading space height: 2,640 mm, total width: 2,600 mm, total height: 4,030 mm, Year of construction: 2007, EKERI 3-axle Thermo Folding Wall Semi-Trailer * ATP Class FNA for deep-freeze transport, including certificate valid until 04-2025 * Tare weight: approx. 10,300 kg (according to vehicle registration document) * First registration: 02.02.2007 Overall condition: sufficient (4) MOT valid until: 05/2027 Inspection valid until: 11/2026 Chassis design: * 3 axles SAF with disc brakes * Air suspension, raise/lower function * Without lift axle * 6 tires 385/65R22.5, FL: 3 mm, FR: 3 mm, ML: 4 mm, MR: 4 mm, RL: 2 mm, RR: 2 mm * Steel rims with offset: 120 mm * Spring brake parking brake, 2 chocks with holder * Storage box made of stainless steel sheet * 2 spare wheel holders * Pallet box closed for 32 Euro pallets * Storage box in the rear, part of the under-run protection * Rear impact guard in the under-run protection * Lighting system with additional reversing lights in the rear * ADR folding warning sign, 2 yellow/orange rear reflector panels * 170 liter fuel tank for refrigeration unit Refrigerated box equipment: Loading area for 33 Euro/26 industrial pallets * Internal dimensions approx.: 13,350 mm long, 2,490 mm wide, 2,640 mm high * Internal width optimized for the transport of up to 43 CC roll containers * Side folding doors on the left side of the body, double-leaf with 10 folding elements each, aluminum-stainless steel door frames, stainless steel hinges and latches. The opening of the side doors begins approx. 80 mm behind the inside of the front wall; the total opening width of the side doors is approx. 13,150 mm; lateral through-loading height: 2,610 mm * Double-leaf rear doors with double rotating bar locking and cylinder locks * 1 pair of universal lashing rails partially embedded in the side walls and doors, approx. 1 m above the floor * Aluminum checkered plate floor * 2 rows of cargo securing rails fully embedded in the floor and mounted along the side walls or side doors * Aluminum base protection strips on the fixed side wall and front wall * Evaporator protection/recirculation frame on the inside of the front wall * Interior lighting in the cargo area * PVC tarpaulin air duct Saddle height: 1120 mm = 4,030 mm overall external height THERMO KING SL 200 30 with diesel drive without electric drive Operating hours approx.: Diesel: 14900, Electric: approx. none. Total: 31410 TransScan temperature recorder Last service: 29.10.2025 Bjdpfxozhapls Agmowu Color: Chassis: red, Body: white, Signage: Perez Cargo Price information: Net price, plus VAT, offer non-binding Your contact persons: Horst Mevissen (DE, ENG) Tel.: Robert Enns (ENG, ESP, DE, FR), Tel.: 0049 Valerij Fuchs (RUS, DE), Tel.: 0049