Vending trailer

ESSELMANN Hähnchen / Imbiss Verkaufsanhänger

Condition: used, axle configuration: 2 axles, first registration: 04/2000, Year of construction: 2000, Equipment: ABS, rear length: 2.70 m internal length: 6.10 m front length: 3.80 m Hodpfx Adozx Nf Dehju overall length: 12.60 m

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Hjdpfxeg Sk T Dj Adhsu Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: good (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 25,500 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, sem bertoja extendable cradle, 3 axles with 2nd and 3rd steering, air suspension, abs, year 1998, 5.30m cradle with additional 3.50m extension, height from ground 45cm, extractable module above the axles, adjustable detachable neck, control wire for steering self-steering axles, good condition, INTERDRIVE SRL-PARMA DEALER Hedpfxswg E Rbj Adhou

Condition: new, empty load weight: 1,300 kg, overall weight: 3,000 kg, loading space length: 6,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Year of construction: 2025, Please arrange a viewing appointment for an on-site purchase or order directly online in our trailer shop. MON. - FRI. 08:00 to 12:30 & 14:00 to 18:00 or around the clock via our online shop at trailershop Content and images are subject to copyright - Logos trademark protection 10/25 Images and all information are non-binding and the price is without load. Hodpfxexn Up Ts Adhju Strong brands at ANHÄNGERWIRTZ for over 34 years Over 850 trailers available from stock and accessory sales / Workshop for Anssems - Brian James Trailers - Blyss - Brenderup - Böckmann - Cheval Liberté - Debon - Eduard - HULCO - HENRA - Koch - Martz - Neptun - SARIS - Tomplan - Trailershop - Variant - WM Meyer and much more... Sale price for new goods with warranty, VAT can be stated separately Delivery throughout Germany & BENELUX EU export net and customs clearance possible (please inquire) 10/25 Clearance sale

Condition: new, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 5,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, VHSP 520 Black Fan Shop Merchandise Sales Trailer The object shown here is an example of our work; it has already been delivered to the customer. As a vehicle manufacturer specializing in custom construction, we design, plan, and build vehicles according to YOUR wishes. Dimensions, attachments, and upgrades, from color schemes to technology, can be freely specified. Do you have questions about feasibility? Send us your list of requirements or a simple sketch, and you will receive a detailed quote with individual prices. Please call 0388 for inquiries. Technical specifications: * Max. Total weight 2500 kg Hjdpev Tt Ipjfx Adhsu * Interior dimensions 520 x 220 x 230 cm LWH * Exterior and interior walls in high-gloss black with black profiles * 2-axle chassis, galvanized steel with 4 swivel supports, rubber-sprung axles * 13-inch tires * Automatic reverse and support wheel * Structure: Polyester sandwich panels (UV-resistant), insulated slatted construction * Walls and ceiling approximately 33 mm thick * Sales hatch on the right in the direction of travel * Entrance door in the front via drawbar * 2 wall-mounted fans * 230 V/CEE connection * 4 LED light strips along the entire length * Power outlets distributed throughout the interior * Electrically adjustable advertising front along the entire length, operated via an internal switch * Bag storage * Interior fittings for merchandise sales: counter and wall work surface with intermediate shelf, partitions, and anti-slip edges * Storage above Sales flap * Glass top with payment strip above the sales counter Images may not reflect standard equipment; technical changes (e.g., tire sizes) are subject to change.

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with angled front corners at 45° and rear taper of approximately 750 mm x 10° •3 pairs of lashing rings •Hardwood decking, 30 mm thick Extendable platform: •Extendable platform with rear taper of approximately 1,000 mm x 8° •Cutouts in the outer frame of the platform for attaching lashing straps •Hardwood decking approximately 48 mm thick, with chequered plate decking over the axles Two-piece steel ramps: •One pair of galvanized, two-piece steel ramps with approximately 48 mm thick hardwood decking •Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable •Maximum load per pair: approximately 40,000 kg Axles and tires: •BPW axles and suspension, 2 fixed axles, 1 steered axle •Technical axle load: 12,000 kg •Electro-magnetic reversing lock activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Braking system: •WABCO braking system according to EU regulations with EBS-E Paint finish: •First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component zinc dust primer •High-quality 2-component topcoat, single-color in MB 7350 Novagrau •Rear section metallized and painted in RAL 9010 Kingpin: •JOST kingpin with 2-speed gearbox for 24t lifting capacity (50t test load). Steel structure: •Steel structure made of high-strength fine-grain steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system according to EU regulations, lighting 24 volts •ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S and 15-pole sockets Included accessories: •One spare wheel with holder •One galvanized steel front bulkhead, approximately 400 mm high •Yellow-red air couplings on the galvanized connection strip at the front •4 chocks •One holder for a rotating beacon at the rear of the semi-trailer •Mounting in the rear area of the gooseneck for aluminum support ramps •Galvanized folding supports under the taper of the platform •Cover plates to bridge the gap between ramps and platform •White reflector tape according to EU regulations on the side, on the extension and at the rear in red •Electro-hydraulic unit at the rear, under the platform •On the gooseneck and on the ramps, one holder each on the left and right for warning signs including socket •Control valves for the ramps mounted on the right side of the semi-trailer •Aluminum side and rear walls on the gooseneck, approximately 2,440 x 400 mm •The rear, galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) •Four warning signs that extend by approximately 400 mm with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the platform Hedpfjhlz S Njx Adhju •Extensions, galvanized, extendable by approximately 230 mm on each side •Square ladder rails 20 x 20 mm every 200 mm on the outer frame of the platform taper •A lacquered sand layer as an anti-slip coating on the chequered plates, over the kingpin and the platform •Load manometer for determining axle loads, including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel structure bead-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, loading space length: 4,900 mm, loading space width: 2,400 mm, loading space height: 3,100 mm, Merchandise/Non-Food Sales Vehicle, Mobile Fan Shop The vehicle shown here is an example of our work; it has already been handed over to the customer. As a vehicle manufacturer specializing in custom construction, we design, plan, and build vehicles according to YOUR wishes. Dimensions, attachments, and upgrades, from color schemes to technology, can be freely specified. Do you have questions about feasibility? Send us your list of requirements or a simple sketch, and you will receive a detailed quote with individual prices. Please call 0131 for inquiries. Technical specifications: * Total length (L/W/H): external dimensions approx. 4900 x 2400 x 3100 mm * Structure: Polyester sandwich panels (UV-resistant), as an insulated slatted construction * Walls and ceiling approx. 33 mm thick * 1 sales hatch on the right in the direction of travel with gas pressure springs * 1 entrance door at the rear, approx. 650 mm wide with 1 handle/lock and 2 additional locks * 2 wall fans * Vehicle lights: 12 volts according to the German Road Traffic Licensing Regulations (STVZO), original lights from the base vehicle. * Matte black edging strips * Trailer hitch up to 2000 kg * Electrically adjustable roof-front GRP sandwich panel Compact Equipment: * Sales counter with glass paneling for merchandise/fan articles * Hanging rail for textiles/merchandise Hjdpfxsv T Hnpo Adhou * Wall-mounted work surface with intermediate shelf * Folding board on the front wall with support leg for a T-shirt press * Aluminum fittings/edging profiles * LED lighting * 230V/16A external connection, distribution board/residual current device * 3 LED strips in aluminum profile for ceiling lighting * 4 double sockets * Counter glass top approx. 500/180 mm, Formica storage, and glass display case supports Images may not necessarily correspond to the standard equipment; technical changes (e.g., tire sizes) are subject to change.

Condition: new, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,300 mm, loading space height: 2,300 mm, VHSP 500 Crew Car / Ambulance The vehicle shown here is an example of our work; it has already been handed over to the customer. As a vehicle manufacturer specializing in custom construction, we design, plan, and build vehicles according to YOUR specifications. Dimensions, attachments, and upgrades, from color schemes to technology, can be freely specified. Do you have questions about feasibility? Send us your list of requirements or a simple sketch, and you will receive a detailed quote with individual prices. Please use #0268 for inquiries. Technical specifications: * Trailer type VHSP 500 * Permissible towing capacity Total weight: 2500 kg * Interior dimensions: L/W/H 500 x 230 x 230 cm * Chassis: Galvanized steel frame * V-drawbar, 2 axles * Quality axle from ALKO * 4 swivel supports * Wheels: 175 R14 * Floor: Anti-slip floor with PVC covering * Body: 33 mm thick walls * Entrance door with lock at the rear (clear width 1200 mm) * Entrance door with lock at the side * 4 ventilation grilles, body framed in white aluminum profiles * Electrics: 12 V * Pull-out floor at the rear, mounted in aluminum under the frame/subframe, approx. 2500 mm x 1000 mm Interior fittings/furniture: * Dometic S4 window 900 x 400 mm, can be opened * 1 x bench seat approx. 2000 x 500 mm with Hinged lid and cushion with artificial leather cover * 2 x tall cabinets/shelf units with shelves in the rear area including 3 drawers below (clear height 200 mm) for material storage on the right side wall. * Tall cabinet on the partition wall on the left side with a fixed panel for cable entry * (oxygen hose, etc.) * 1 x installation of a supplied folding bed for the left side wall in the rear area including the wall inserts for attaching the bed * 2 x bench seats with upholstery and a table in the bow area * 1 x sink base cabinet with superstructure (doors at the top) with water supply/boiler/canister/pump, etc. Sockets for chargers in the upper cabinet. Upper cabinet lockable. Hjdpev Uhidofx Adhsu * 4 lashing eyes recessed into the floor * 1 wall cupboard above the seating area at the front with hinged doors. All furniture is made of blockboard/stripboard with Formica coating, color to match the interior wall as polyester panel (per sqm). * Electrical system/540: 230V/16A switchboard, residual current device, 4 automatic safety cut-outs, CEE socket, 6 double sockets, and 4 LED strip lights in aluminum profiles. 4 exterior LED lights as surface-mounted lights. Images may not necessarily correspond to the standard equipment; technical changes (e.g., tire sizes) are subject to change.

Condition: used, FlexFuse GmbH – Your partner for premium food trailer rentals and catering equipment. Do you want to realize your culinary business idea or present yourself professionally at an event, festival, or street fair? With FlexFuse GmbH in Leipzig, you benefit from a large, modern fleet that meets the highest quality standards – complemented by a wide selection of professional catering equipment for rent. Our strengths – your advantage: Exclusive fleet: Modern food trailers in various sizes and configurations. Complete solutions from a single source: Optional high-quality catering equipment – from deep fryers and grill plates to refrigerators and freezers. Hjdpfozw N D Rjx Adhou Maximum flexibility: Rental periods from a few days to several months. Hygiene & safety: Thoroughly cleaned, technically inspected, and immediately ready for use. Note: Use is permitted only within Germany. With FlexFuse GmbH, you receive not only a sales trailer, but also a customized complete solution for your success – reliable, high-quality, and individually adaptable. Contact us now and secure your desired food trailer with optional catering equipment! Internal dimensions approx.: 3920 x 2220 x 2170 mm - External dimensions approx.: 5327 x 2300 x 2820 mm - 1 x sales window on the right side (direction of travel) - Permissible total weight: 1500 kg - Single-axle - Tires: 13" - 1 x lockable entrance door - Stainless steel side walls, work surfaces - Wall hood - 1600 mm - with motor, controller, filter, lamp - Double electric grill plate - 73 cm - Royal Catering - smooth - 2 x 2200 W - Electric double deep fryer - 2 x 16 l - 6400 W - drain valve - Royal Catering - Electric bain-marie - 1.2 kW - for GN 1/1 with 150 mm height - with drain valve - Cooling display case ECO - 1200x335mm - 5x GN 1/4 - Refrigerator/freezer combination Inox

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2008, loading space length: 14,890 mm, loading space width: 2,740 mm, loading space height: 910 mm, total length: 14,890 mm, total width: 2,740 mm, total height: 910 mm, wheelbase: 12,030 mm, Year of construction: 2008, Equipment: tail-lift, Axle Configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Rear axle 4: Max. axle load: 9000 kg Rear axle 5: Max. axle load: 9000 kg Weights Unladen weight: 17,100 kg Payload: 50,900 kg GVWR: 68,000 kg Functional Hedpfxozupa Ho Adhsu Loading platform height: 90 cm Condition Technical condition: good Optical condition: good Damage: none Financial Information Price: Upon request Identification License plate: ZZ-82-29 Additional Information Please contact David F. Middelman for further information.