Low loader

Faymonville F-S42-2ACB Pendel X 4.2 meter extandable + 3 me...

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Fodpfoxgk U Njx Aaiopi Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: used, axle configuration: 3 axles, Year of construction: 2020, Year of manufacture: 2020 Rear axle 1: Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Steering; Tyre profile left: 50%; Tyre profile right: 50% Empty weight: 11.900 kg Fpedpszhxa Aefx Aaisi Carrying capacity: 36.100 kg GVW: 48.000 kg

Condition: new, maximum load weight: 37,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,250 mm, Equipment: ABS, MAX Trailer Type 200 NEW | Extendable | 37t Payload | 3 Axles | from €57,000 New vehicle – individually configurable according to your application needs. High payload capacity thanks to robust construction and maximum cost efficiency. Highlights: - Extendable loading platform with pneumatic locking - Numerous heavy-duty lashing points for optimal load securing - BPW axles, air-suspended with disc brakes and lift/lower function - Self-steering axles with electromagnetic reverse lock - WABCO EBS brake system in accordance with EU regulations - Sturdy steel construction with high-grade corrosion protection - LED lighting system - Mechanical JOST landing legs with 2-speed gearbox - Tire pressure monitoring system (TPMS) Construction & Body - High-strength fine-grained steel structure for long service life - Metallized chassis with additional cavity sealing - Multilayer paint structure for optimal protection Fpodpfx Aaoypazxeisi - Durable wooden floor in reinforced omega profiles Includes options: - Galvanized front wall (approx. 1,200 mm) - Spare wheel carrier under the loading platform - 10 pairs of stake pockets for flexible load securing - EN 12642-XL compliant body - Reflective tape & European reflector plates - Mounts for warning signs incl. socket - Beacon holder - Air couplings at the front Additional equipment and individual adaptation possible at any time – we configure your vehicle precisely to your requirements. Sample photo. Actual equipment may vary depending on configuration.