Working platform semitrailer

FAYMONVILLE MAX Trailer MAX200 Telesattel

Condition: used, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 03/2024, loading space length: 6,850 mm, loading space width: 25,400 mm, loading space height: 350 mm, tire size: 245/70 R 17.5, color: grey, Year of construction: 2024, Equipment: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading area length, approx. 3,785 mm long - Gooseneck hydraulically liftable/lowerable as well as detachable - Technical kingpin load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Gsdpfortqylex Adtskd Loading Area: - Low-bed with external beams in extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed section with fixed hardwood floor, approx. 40 mm thick, and pneumatically actuated locking mechanism - Supply lines are protected inside the extendable beams and automatically adapt to the respective length of the low-bed - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD lashing rings Rear Chassis: - Rear chassis with closed outer frame, checker plate covering, and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles and Tyres: - Pendulum axles, all axles hydro-mechanically forcibly steered - Hose rupture valve on the axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and positioning pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Axle tool kit - Tyres: 245/70 R 17.5 Braking System: - Braking system compliant with EU regulations with EBS-E, without connection lines to the tractor unit Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component zinc dust primer - Rear section metallized and painted in RAL 9010 Included Accessories: - Prepared for bolted container locks for 1x 20' or 1x 40' containers on the external beams - One galvanized steel front wall approx. 400 mm high - At the galvanized front connection bar, yellow and red air couplings - 2 wheel chocks with holder on the front wall - Rear steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings - Electro-hydraulic unit - On the gooseneck and on the rear plate, left and right, a holder for warning panels incl. socket - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable - 5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area, 2 pairs in the outer frame of the chassis - Folding extensions, approx. 230 mm per side - 1 pair of steel ramps for bridging the low-bed mounting hooks - 80 km/h speed stickers at the rear and on both sides - On the warning boards, a mount for a revolving beacon - Radio remote control for rear steering in addition to the cable remote, with LED indicators on the receiver as single-track control - Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump - Excavator dipper trough at the rear chassis closed at the rear with a plug-in plate

Condition: new, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,550 mm, suspension: air, tire size: 385/65 r 22,5, color: white, Year of construction: 2023, Equipment: ABS, New, Disc brakes, 1st axle liftable, 3rd axle steerable, box truck with 1,500 mm steel cage guard, 800 mm aluminum side and rear rails, No. 4 pairs of 90 mm side holes for stanchions, No. 1 pair of front holes, No. 1 pair of rear holes, holes at the cage guard for resting stanchions, No. 12 1,200 mm stanchions, side hooks load stoppers, through-basket for woods, pvc box, wheel holder, ship hooks, pad wear kit Gedek Af Tlopfx Adtokd

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, Delivery time: approximately 3-4 months after receipt of order! Gkedpfoivw Dvox Adtod NEW VEHICLE Kässbohrer Platform Light SPS 3 # Unladen weight 6,100 kg # Fifth wheel load 15,000 kg # BPW axles with disc brakes # 1st axle as lift axle # Jost landing gear 24 t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V Aspöck lighting system # Tires: 6 x 385/65 R 22.5 brand-name tires # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width equipment (4 galvanized over-width panels with LEDs + 1 rotating beacon) # Stainless steel toolbox on the right in the direction of travel # 6 x 2 Jost container locks, retractable # Stanchion holder mounted on the front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 4t lashing rings on the platform # 108 lashing points on the outer frame, each with a capacity of 2t # Front wall with Code XL certification! # Chassis cathodic dip-coated and painted RAL 3020 Traffic Red # Front wall RAL 3020 Traffic Red ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH, 47574 Goch, Germany

Condition: new, maximum load weight: 35,060 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Complete specifications available on request. GOOSENECK * Gooseneck designed as a loading platform with aluminum checker plate covering * Hydraulic lifting rocker, approx. -280/+250 mm, can be raised and lowered * Two kingpin positions at approx. 2,300 mm and approx. 2,000 mm * For tractor units: 4x2, 6x2, or 6x4 * 2-inch kingpin * 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) * ASPÖCK UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets; 24N connection according to ISO 1185, 24S connection according to ISO 3731 * 15-pin connection according to ISO 12098 * Yellow-red air couplings on the front connection panel * Lighting for operation of the gooseneck, suspension, and hydraulic bracing with on/off switch * Boom for suspending supply lines on the front of the gooseneck * All work lights in the gooseneck area operated via on/off switch on the gooseneck LOADING AREA * Loading well, approx. 9,500 mm long, with angle profiles mounted underneath for loading pallet support (distance from kingpin to axle center approx. 8,000 mm) * BPW stub axles with drum brakes and independent suspension, hydraulic axle compensation with lifting and lowering function * Tires: 385/65 R 22.5 (M+S) * Mechanical drop-leg supports for approx. 48,000 kg support load * Access ladder mounted front right, with 2 removable handrails * Detachable full coverings on both sides in front of the axle assembly * WABCO Roll Stability Support (RSS) * 9 pairs of lashing rings (LC 6,300 daN) on the longitudinal beams * Grating support on the longitudinal beams, flush with integrated load securing guide rails * First and last axle manually liftable (left and right) * Storage boxes behind the axle assembly on left and right, splash-water protected * Rear chamfer for easier insertion of pallets * Lashing eyes at the end traverse for mechanical bracing * Rear door with cross-bracing, hinged on the left and hydraulically locked on the right, can be secured horizontally at 90°, 105°, and 270° * Underride guard foldable upwards for transporting up to 4 empty standard pallets * Number plate holder with lighting on the rear door * A 7-pin socket on the end traverse * Electro-hydraulic unit for operating hydraulic functions (without installation in the tractor unit) * TPMS tire pressure monitoring sensors installed on all wheels, including spare wheels * Control lights indicating nominal ride height in the vehicle control area * 1 odometer mounted on the left * 2 axle load gauges with axle load diagram mounted on the left * 2 rubber buffers at the front of the loading channel as stops for the pallet * Hydraulic preparation including controls for mounting 4 pairs of our hydraulic load securing systems * 1 spare wheel holder on the right (in the direction of travel) Gkedpfx Aswx Dc Hsdtod * EU reflector at the rear of the vehicle * Acoustic reversing warning signal * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) BRAKE SYSTEM: * WABCO EBS brake system in accordance with EU regulations. WITHOUT connecting cable to tractor unit LIGHTING SYSTEM: * 24-volt lighting system in ASPÖCK-NORDIK full LED version, compliant with EU regulations (ASS 3) SURFACE TREATMENT HRM metallization

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Gjdpfeugqvfsx Adtjkd Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,300 mm, Equipment: ABS, NEW VEHICLE Kässbohrer extendable platform SPA X3 Delivery time: approx. 4 months after order placement! # Fifth wheel load: 18,000 kg # Saddle height: 1,150 mm Gedpfxorvf Dke Adtskd # Extendable by 3,500 mm Axles / Braking system: # BPW axles with 22.5" disc brakes # 3rd axle is a self-steering trailing axle # 1st axle is a lift axle # WABCO braking system 4S/3M # 6 branded tires 385/65/22.5" on steel rims # Jost landing legs 24t # Electrical connections: 2 x 7-pin and 1 x 15-pin # 24V Aspöck lighting system # 2 plastic wheel chocks Equipment: # Non-removable sliding table, 300 mm long # 30 mm hardwood floor # Oversize equipment (4x galvanized oversize panels with LEDs + 1x rotating beacon) # Stainless steel toolbox 1,000 mm x 500 mm x 500 mm, mounted on the right in the direction of travel # 6x2 retractable container locks # Stake holders mounted under the chassis + 18 stakes 100 mm x 50 mm # 6 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 13.4t, 8 x 2 lashing rings 8t, 108 lashing points on the outer frame, each rated at 2t # Front wall 1,500 mm high with Code XL certificate! # Chassis KTL-coated and painted RAL 3020 traffic red # Front wall RAL 3020 traffic red ----Subject to errors, modifications, and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm Gkedpfx Adowvzg Retjd - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment features. Full equipment details available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For tractor units: 6x4 or 8x4 2-axle front undercarriage: * Bolt-eye coupling front and rear. Length approx. 2,970 mm * Undercarriage width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Godpexn E I Hofx Adtokd Loading platform: * 6-axle extendable loading platform with bolt-eye coupling at the front and rear bevel approx. 500 mm x 8°, length approx. 11,000 mm * Technically extendable by approx. 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the center beam (LC 10,000 daN) Pendulum axle 2-axle front undercarriage: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24 x brand at our discretion (M+S) 245/70 R17.5 load index 143/141L (146/146F) Painting: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Options included: * Truck hydraulic connection with volume regulator (20 l/min), incl. support gantry for supply lines, tractor unit tank must have a minimum capacity of 80 L * with MAX Trailer couplings, alternatively couplings to be provided ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodized finish * Socket for steering operation at the gooseneck via cable remote control with pushbuttons including single-track control of the axles (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Control lighting at the gooseneck with on/off switch * BEKA-MAX central lubrication system for one gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed trailer with screw couplings * BEKA-MAX central lubrication for the 2-axle undercarriage with standard grease NLGI-2 * Stake pocket rails mounted crosswise in the loading platform floor for plug-in stakes approx. 100 x 50 mm * Surface of undercarriage coated with integrated sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Loading platform surfa

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – Forced Steering Two identical units available – Volvo FM 370 tractor unit (year 2018) available on request Chassis number: VAVJS1339PH522406 + VAVJS1339PH522408 Mileage: 7,700 km - Weights Gross technical weight: 39 t Axle unit load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width: 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at center over 4 m loading length - Frame height front approx. 230 mm - 2" interchangeable kingpin - Chassis for unladen coupling height approx. 1,120 mm – ca. 1,200 mm with air-suspended tractor - 4 mm outside frame with hole spacing approx. 100 mm, slotted hole 50/30 mm, for lashing points of 3.5 t each - 10 pairs of 5 t lashing rings, recessed and hinged in floor, also foldable outwards - 8 pairs of square tube inserts with plug-in housing for 80x80 mm stakes, both sides of outer frame - 6 square tube inserts with plug-in housing for 80x80 mm stakes, crosswise over full width, max. pull 2,000 daN AXLES - BPW EcoDisc axles with 430 mm disc brakes (22.5" disc) - Load capacity 9 t/axle, on-road specification - 1st axle rigid - 2nd and 3rd axles with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front turntable with steering wedge - Steering transmission via two tie rods, rear axles with bogie - Central lubrication points for steering at the front turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on weight, lift/lower assistance with speed restriction Gkodpfx Adoxq S H Istod BRAKE SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-controlled - RSS/RSP stability program - Spring-actuated parking brake on 2 axles - Aluminum air tanks - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lifting/lowering function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for retrieving data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood floor with steel top-hat profile strips above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted to both sides of the outer frame - Aluminum forklift protection strip, rear crosswise - Enclosed, special steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / monochrome painted lid - 8 removable hardwood transverse support beams, approx. 100/100 mm, steel-edged, fixable in plug-in mounts in the outer frame Very good condition, German registration documents, immediately available.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/1900, suspension: air, tire size: -, Year of construction: 1900, * Length: 13.55 m * 12 twistlocks * 1x20’, 2x20’, 30’, 40’ * Coupling height: 1150 mm Gkedpfx Adjxtf Iwotod * Front bulkhead: 1.60 m * 12 steel posts at 1.60 m * Solid KAPUR floor, 34 mm * UPN 140 side member * First axle liftable * Spare wheel holder * PVC toolbox * Long mesh rack * 13 lashing rings (2T each side) * LED work lights Lift axle Tyre info: 385/65R22.5 Delivery time (days): 1 Manufacturer Condition: New