Working platform semitrailer

KÖGEL Multi Chassis, verstärkt, Bordwände

Condition: used, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt - Equipment Frame 10110.122 Regular ladder frame in lightweight steel construction with continuous cross members. 10115.010 With chassis frame pre-tension. 10300.108 Coupling plate approx. 8 mm thick, with a 2-inch drawbar eye according to DIN 74080 / ISO 337. Chassis I 17160.010 Axle lift mechanism on axle 1. I 17165.103 Axle lift control fully automatic, load-dependent. Starting assistance: Activated by pressing the brake 3 times. 30% overload up to a speed of 25 km/h. 18330.700 Manufacturer of choice: Kögel - Three-axle unit, with disc brakes Ø 430 mm, approx. 120 mm mounting depth. Air suspension with approx. 180 mm travel. Vehicle tires I 20540.037 Tires 6x 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L). Chassis components 20110.010 Kingpin supports (manufacturer of choice: Kögel) mechanical with leveling foot, approx. 24 t lifting capacity. Single-sided operation on the right side in the direction of travel. I 21070.117 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles. 21300.001 2 chock blocks with holder. I 22070.008 Deletion of the standard side protection. I 25010.170 Storage box for storing: 10 side panels, folding battens and rear door or rear flap. Fully enclosed, protected against spray, simultaneously serves as side protection. I 25090.220 Ground clearance (front) approx. 220 mm. I 25620.101 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installed at the rear, 1x on the left and 1x on the right. I 26110.005 Deletion of access ladder. 27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58. I 71800.020 1 pair of retractable warning boards for overwidth loads, retroreflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear Hsdpfx Aszkx Hhsnlenp vehicle area. Brake/Air suspension system 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection lines), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostics connection via ISO 7638 plug connection. I 32125.010 EBS system (manufacturer of choice). 33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left behind the axle unit in the direction of travel. Driving position is automatically adjusted. 34320.001 2 non-interchangeable coupling heads at the front, ISO 1728. 34410.010 Air reservoir for brake system and air reserve made of steel (EN 286-2). Floor 40510.120 Plate floor approx. 30 mm thick. I 40513.020 Floor sealed around the perimeter. I 40542.023 Girder pockets for square tube inserts approx. 80 x 80 mm, arrangement according to drawing J9: 8 pieces of girder pocket rails (18 girder pockets per rail: 4 pieces each on the outside + 10 pieces in the middle). Superstructure I 46538.010 Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall I 40532.260 Storage for max. 20 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall. I 41710.201 Front wall approx. 2,000 mm high with volume corner supports made of steel, with profi

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, next inspection (TÜV): 05/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel with continuous crossmembers * With an extension of the chassis frame, the coupling plate is approximately 8 mm thick * with a 2-inch kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC * with disc brakes Ø 430 mm * ET 120 air suspension with approximately 180 mm travel Tires * Wheels with internal sensors according to UN ECE R141 * 6x 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims 22.5 x 11.75 * Offset approximately 120 mm (ET 120) Chassis components * Mechanical fifth wheel with leveling foot, approximately 24 t lifting capacity, single-sided operation on the right-hand side while driving * Storage box for: 10 side panels, folding stakes, and rear gate, fully enclosed, protected against spray water, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm, installed at the rear, 1x on the left and 1x on the right Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection lines) * Parking brake as a spring brake, external pneumatic connections as well as an external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit while driving, driving position is set automatically * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for the brake system and air reservoir made of steel (EN 286-2) Floor * Flat floor approximately 30 mm thick, multiply laminated plywood * Floor sealed around the perimeter * Stake pockets for square tube inserts approximately 80 x 80 mm * Storage for a maximum of 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the front wall inside Front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640, Note: If the front wall is used for securing the load, suitable lashing straps must be used to tighten the load, if the vehicle is operated without side panels and a rear gate Rear wall * Folding rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locks * 2 folding steps on the inside, folding steel corner posts at the rear in the height of the side panels Side wall * 4 pairs of folding stakes in the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stake holders for folding stakes on the outer frame (evenly distributed) * 24 pairs of lashing eyes in the outer frame (according to EN 12640), permissible tensile force approximately 5,000 kg per ring Side panels * 5 pairs of folding side panels approximately 600 mm made of aluminum hollow profiles with tension bars Electrical / Electronics Hodpszc A Afsfx Anlonp * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED outline lights and reflectors at the front, flashing LED side marker lights, Superseal and bayon