Heavy load

MAN TGS 33.540 MAN TGS 33.540 6x6 BB SA

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Load area: - Gooseneck, length approx. 4,100 mm with central beam - Extendable load area, length approx. 9,500 mm with a slope at the rear of approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum approach ramps - Pneumatic locking with tapered locking bolts and reinforced locking positions - The supply lines are protected in the extendable beams and automatically adjust to the respective load area length Axles, suspension, and tires: - BPW axles and suspension, all axles hydro-mechanically forced steering - Mounted on a turntable - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Tires 235/75 R17.5, dual tires Painting: - 6-layer finish - Complete steel construction blasted after welding - One layer of zinc-based primer, one layer of adhesion primer - Final coat with 2 layers of 2-component paint (acrylic), solid color in MB 7350 Novagrau, followed by sealing of cavities with special wax Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Front panel made of steel, approx. 1,600 mm high - Round NATO socket on the connection strip at the front - 3 kW electric-hydraulic unit for controlling the hydraulic operations - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for stakes approx. 100x50 mm - 1 stake pocket strip mounted transversely in the load bed of the gooseneck, for stakes approx. 100x50 mm (1x at the rear of the gooseneck) - 2” kingpin - Mechanical landing gear with 2-speed gearbox and crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and load area, approx. 32 mm wooden floor edged with aluminum omega profiles - A locking point on the extension, approx. every 500 mm - 10 pairs of recessed lashing rings lying in the outer frame of the load area, can be folded outwards - 6 pairs of stake pockets recessed in the outer frame of the load area, for stakes approx. 100x50 mm - 2 stake pocket strips mounted transversely in the load bed of the load area, for stakes approx. 100x50 mm - Tool box INOX approx. 1,250 x 500 x 550 mm - Slope on the end crossbar of the vehicle, approx. 350 mm 10° - Integrated mounting rail for loose aluminum approach ramps on the end crossbar of the vehicle - 1 pair of outrigger supports at the end crossbar - Fenders on all axles - Central lubrication system with 1 pump - Steering from the front and rear via cable remote control, operable via push buttons, with single-axle control - Under the gooseneck and at the rear on the end crossbar, one 7-pole socket each for warning signs - One 7-pole socket on the end crossbar - Container locks “TWIST-LOCKS” in the load area for the transport of 2x 20ft and 1x 40ft containers Lhjdpfx Asiuy Nlen Ieh - Radio remote control for the steering, in addition to the cable remote control, with 2 indicator lights on the receiver for single-axle control - 2 axle load gauges + axle load diagram - 4 warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM metallization (High Resistance Metallization) of the outer frame - Complete steel construction blasted, then the defined visible surfaces hot-dip galvanized with ZINACOR 850 (zinc 85% - alu

Condition: new, empty load weight: 8,900 kg, maximum load weight: 40,100 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, operation weight: 8,900 kg, Chassis: - Sturdy steel frame welded construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck section of frame 200 mm with beveled front corners - Tapered gooseneck end approx. 500 x 100 mm (traction ribs on the outer frame in the area behind the rear taper) - 2 king pin positions with replaceable 2” king pin - Outer frame closed outwards as a perforated outer frame - Loading area with extendable central frame, extendable by approx. 2,000 mm, lockable every 500 mm pneumatically - Frame stepped 80x80 mm before and after the division - Reinforced frame design / point load in retracted state centered at the center of gravity - Without extendable load area widenings, but prepared for retrofit (= guide tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, running to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (coated with Körapur), depth approx. 400 mm - Underrun protection = extended rear closing plate - Drop-down stabilizers at the rear Axles, Steering, and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjuster - Lifting and lowering device with total lift of approx. 200 mm Lhedpsxnnk Djfx An Ieh - 2nd driving position via ball valve +50 mm - 1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency operation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Plug-in side walls and rear wall on the gooseneck, approx. 400 mm high - Spare wheel carrier - Side aluminum underride protection - 4 wheel chocks with holders - Long license plate holder in rear closing plate - 1 plug-in ECE plate at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 2x on the loading area before extension - 7x after extension - Extendable warning boards incl. 3 marker lamps each, at the front on the landing gear and at the rear before closing plate, infinitely extendable up to loading width 4,500 mm - 4 holders for warning boards insertable into stake pockets on the loading area - 6 pairs of stake pockets on the side for stakes 100x50 mm - 2 transverse rows of stake pockets for stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after king pin positions) - 3 transverse rows of stake pockets for stakes 100x50 mm on the loading area from outer frame inward to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accept 1x 20ft container - Rubber apron mounted on underrun protection Ramps available as an option.