Mobile crane

Liebherr LTR1100 Diesel, 100t Capacity, 52m Main Boom, Runn

Condition: used, mileage: 45,700 km, Year of construction: 2005, Intended use: Construction Drive: Wheel-based Unladen weight: 36,000 kg Lifting capacity: 45,000 kg Dimensions of the loading area: 1150 x 270 x 390 cm Tjdpfeyl Huwex Akcea Serial number: 53517 Condition of front tires: 70 Condition of rear tires: 70 Please contact PFEIFER GROUP for further information.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered Tjdpfx Aorgzv Njkcsa * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: Tsdpfx Asl Sl Izokcsa One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: excellent (used), functionality: fully functional, mileage: 43,028 km, power: 236 kW (320.87 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 36,000 kg, empty load weight: 36,000 kg, tire size: 445/95 R25, axle configuration: 6x6, number of seats: 1, first registration: 06/2020, DGUV certified until: 06/2025, next inspection (TÜV): 06/2026, emission class: euro5, mast type: telescopic, brakes: telma, suspension: hydraulics, Year of construction: 2020, operating hours: 2,998 h, machine/vehicle number: WLFC30CZ1LEZZ0009, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, differential lock, onboard computer, parking heater, retarder, soot filter, LOCATION: D-73230 KIRCHHEIM UNTER TECK . Liebherr LTC 1050-3.1 - Serial No. 056 808 Lifting capacity: 50 t / 2.5 m (75%) . Telescopic boom: 8.2 - 36 m (Telematik) Swing-away jib: 7.5 m Assembly jib: 1.5 m (incl. hook traverse and roller set) Number of winches: 1 Counterweight: 4.8 t / 1.7 t (6.5 t total) Hook blocks: 3-sheave 32 t double hook, lifting hook 4.8 t Outrigger system: VarioBase (variable outrigger base) Engine: Cummins 6-cylinder / 236 kW / 320 HP / Emission standard Stage V and TIER 4 according to EPA Transmission: ZF-TraXon Auxiliary brake: Telma Drive/steering: 6 x 6 x 6 Tyres: 16.00 R25 (445/95 R25) Bridgestone Lower chassis operating hours: 1,485 h Upper structure operating hours: 2,998 h Mileage: 43,028 km Safety system: LICCON 2 . OTHER EQUIPMENT - Air conditioning and auxiliary heater Tedpfoxtu Nqjx Akcea - Upper structure lighting package: 2 x work lights (Xenon) on boom head and 3 x floodlights on superstructure - Height-adjustable crane cabin - Winch monitoring and rear-view camera - 12 V socket in the cab - Working range limiter - Emergency operation for crane hydraulics . Very good condition – German machine from first owner – further details on request – immediately available from stock Kirchheim unter Teck.

Condition: used, mileage: 278,066 km, Year of construction: 2009, Drive: wheel Tedpfew D N Raox Akcoa Unladen weight: 72,000 kg Lifting capacity: 150,000 kg Cargo space dimensions: 1620 x 285 x 395 cm Serial number: 068506 Front tire condition: 80 Rear tire condition: 80 Please contact PFEIFER GROUP for further information.

Condition: used, mileage: 41,260 km, power: 230 kW (312.71 HP), first registration: 03/1995, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: crane, Vehicle identification number: W09363000SEL05061 Crane serial number: 19211 German machine - MOT due ----Crane chassis data: Operating kilometers: 41,260 km - approx. 14,703 h Number of axles: 3 Driven / steered: 6x6x6 Central lubrication system Tires: 445/95 R 25 ----Crane upper carriage data: Heated cabin Telescopic boom / boom: 30 m / 3 Maximum load capacity: 40 tons Counterweights: 7.1 tons Hook block Central lubrication system Operating hours: 11,596 hours Todpfx Aow Ii Ewjkcoa Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Drive: Wheel Unladen weight: 60,000 kg Lifting capacity: 250,000 kg Cargo compartment dimensions: 1586 x 299 x 399 cm Serial number: 088666 Front tire condition: 90% Rear tire condition: 90% Please contact PFEIFER GROUP for more information. Tjdpjwz Utzefx Akcja

Condition: good (used), functionality: fully functional, mileage: 201,931 km, power: 400 kW (543.85 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 60,000 kg, tire size: 445/95 R25, axle configuration: 10x8, first registration: 09/2004, emission class: euro3, Year of construction: 2004, operating hours: 17,202 h, machine/vehicle number: W095750004EL054xx, Equipment: ABS, all wheel drive, crane, differential lock, Liebherr LTM 1100-5.1 – Serial No. 065 437 Lifting capacity: 100 t / 75% Year of manufacture: 2004 Tsdpfx Asy E Ih Hjkcea Telescopic boom: 11.5 – 52 m Swing-away jib: 10.8 / 19 m (hydraulically adjustable) Number of winches: 1 Counterweight: 26.0 t / 9.0 t (total 35 t) Hook blocks: 3-sheave 63 t double hook, 1-sheave 30 t, 10 t load hook Carrier engine: Liebherr D9408 TI-E A5 – 400 kW / 544 HP (replacement engine 08-2014, 6,868 h) Upper carriage engine: Liebherr D924 TI-E – 149 kW / 202 HP Operating hours: Carrier 10,405 h (ATM 3,537 h) Operating hours: Upper carriage 17,202 h Gearbox: ZF AS-Tronic automatic transmission Additional brake: Telma retarder Drive/steering: 10 x 8 x 10 Tyres: 16.00 R25 (445/95 R25) Bridgestone Mileage: 201,931 km Safety system: LICCON 1 ADDITIONAL EQUIPMENT - Combined storage box at vehicle rear - Emergency stop button in driver’s cab and crane cab - Working area limitation

Condition: good (used), mileage: 128,232 km, Year of construction: 2014, operating hours: 14,003 h, Manufacturer: Terex Demag Type: AC 40-1 City Year: 2014 Tedpoyr Iz Sjfx Akcsa Capacity: 40 t Main Boom: 31.2 m Kilometers: 128,232 km Crane operating hours: 14,003 h Optional jib: 13 m Runner (assembly jib): 1.2 m

Condition: like new (used), functionality: fully functional, mileage: 300,000 km, first registration: 12/2018, fuel type: diesel, empty load weight: 16,000 kg, maximum load weight: 16,000 kg, overall weight: 32,000 kg, tire size: 315/70R22.5, axle configuration: 8x2, fuel: diesel, brakes: intarder, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 8,400 mm, loading space width: 2,550 mm, Equipment: ABS, AdBlue, USB port, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, hill-start assist, power assisted steering, retarder, traction control, IVECO STRALIS AD320S42 FLATBED WITH BONFIGLIOLI CRANE / 4-AXLE LOWBED TRAILER 8X2 for transporting cars, commercial vehicles, agricultural vehicles, etc. Ref: 912336 POWER: 420 HP YEAR: 12/2018 KM: 300,000 EURO 6 AUTOMATIC GEARBOX + RETARDER FULL AIR SUSPENSION BONFIGLIOLI P15000L CRANE WITH 4 HYDRAULIC EXTENSIONS FLATBED DIMENSIONS: 8.40 X 2.55 M + HYDRAULICALLY EXTENDABLE RAMPS (2 M). HYDRAULIC WINCH LIFTABLE AND STEERABLE 2ND AND 4TH AXLES REAR STABILIZERS GROUND CLEARANCE: 1.10 - 1.16 M REMOTE CONTROL FOR RAMPS + WINCH REVERSING CAMERA PAYLOAD KG: TYRES: /70 DIFFERENTIAL LOCK STEEL BUMPER AIR CONDITIONING CAB WITH REAR WINDOW CENTRALIZED DOOR LOCKING EXTERNAL SUN VISOR ACCESS LADDER TO FLATBED For more details visit our website: vanzetto.it Vanzetto Veicoli Industriali Via Rovigana, 47/G 35043 Monselice (PD) Contact: Umberto Vanzetto Todoy Eqq Uopfx Akcja We have in stock: TRUCKS, LORRIES, IVECO, MERCEDES, VOLVO, RENAULT, DAF, MAN, SCANIA, FIAT, DAILY, EUROCARGO, STRALIS, TRAKKER, TIPPER, HOOKLIFT, CURTAIN SIDE, TARPAULIN, PANEL VAN, BOX, REFRIGERATED, VAN, INSULATED, COIBENTED, FIXED BODY, TRACTOR UNIT, TRAILERS, RIGID TRUCKS, DRAWBAR COMBINATIONS, SEMI-TRAILERS, CHASSIS, stralis 310, 330, 420, 450, 460, STRALIS 480, 500, eurocargo, 75, EURO CARGO 80, 90, 100, eurocargo 120, 140, 150, eurocargo 160, eurocargo 180, 190, eurostar, eurotech, eurotek, turbo star, cursor, moving floor, crane, fitting, tired, waste, farid, compactor, tanker, tipper, used, Italy, Monselice, Solesino, Padova, LOWBEDS, FLATBEDS, CAR TRANSPORT, TRACTOR TRANSPORT, ROADSIDE ASSISTANCE, Veneto, for sale, used commercial industrial vehicles, for sale. RECOVERY VEHICLE / FLATBED / LOWBED / MACHINERY TRANSPORT