Working platform semitrailer

KÄSSBOHRER SPA Mega Tele Plattform Auflieger mit Radmulden

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: -Steel frame welded construction with front and rear frame offset and low bed without rear bevel -Frame neck + fifth wheel plate 225 mm -Low bed designed for point load 25 tonnes over 5 m -Outer frame closed on the outside with welded-in tie rings for lashing -Replaceable 2" king pin -Rear suspension rail for aluminium ramps Axles and tyres: -BPW low-loader axles, 10 tonnes axle load each, bellows diameter 360 mm -Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) -Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm -S-cam brake 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -IVTM tyre pressure monitoring -9 tyres 235/75 R 17.5, tubeless Steering: -1. and 2nd axle hydraulically forced-steered via fifth wheel coupling Floor: -Multi-layer glued plate floor with a thickness of 27 mm flush with the outer frame and longitudinal beams -Reinforced at the bottom with GRP coating -12 pairs of binding rings welded into the outer frame (8 pairs of RUD 8 ton - 6 pairs in the low bed and one pair each on the gooseneck and at the beginning of the rear unit - 2 pairs of 4 ton lashing rings each on the gooseneck and rear unit) -6 pairs of mushrooms in the outer frame in the low bed -Storage compartment with lid in the floor of the low bed at the front left and right Redpfx Aoiu Eu Nsbzop Front wall: -25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding tarpaulins: -Sliding tarpaulins on both sides with welded vertical and horizontal straps (distance approx. 600 mm) and tension fasteners made of stainless steel -Adjustable tarpaulin straps (over dead center) up to loading width of 4,000 mm including tarpaulin extension with press studs and Velcro fastener -Tarpaulin extension in direction of travel: 300 mm, height: 750 mm -Incl. Eyelets for loose tarpaulin extension part -1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low bed at the front bend -With belt pockets Rear wall: -Steel rear portal frame with side tarpaulin attachment device -Aluminium double-wing door, 25 mm thick -Both door wings can be fully folded over with door stop -One aluminium double-joint hinge and two recessed grip recesses per door wing Corner pillars at the front: -At roof height, screwed on to the front Central pillars: -3 pairs of continuously adjustable folding pillars -The pillars can be moved along the entire length using a trolley -Central pillars in the low bed can also be fixed in the rear platform Roof: -EDSCHA sliding roof (galvanised) with crossbars that can be moved in both directions (pushed together towards the front in the loading space) -Rear portal crossbeam can be swung away -PVC tarpaulin roof without customs seal -Hand hydraulic lifting roof on both sides, lifting 450 mm -Lifting roof can be moved in the positions at the front (9x50) and rear (9x50) -Including tarpaulin extension and tarpaulin flap at the rear -Canopy at the very front of the bulkhead can be cranked out 900 mm each Accessories: -Extendable warning signs (removable at the front and rear with socket) including position lights up to a loading width of 4,000 mm -Storage of the 4 warning signs on the inside of the front wall, top right and left -1 aluminum ladder with bracket 2,500 mm long on the front wall -2 rows of aluminum slats attached in a self-locking manner -Sheet metal mudguard with mud flaps -1 night parking sign and 1 ADR

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Rsdpfxorukt Rs Abzop Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2025, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: Rjdpfx Ajrukursbzop * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: used, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 10/2025, loading space length: 7,300 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Year of construction: 2025, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame cranking and low bed without rear chamfer - Gooseneck + fifth wheel plate 225 mm - Low bed designed for a point load of 25 t over 5 m - Outer frame closed on the outside with welded lashing rings for securing loads - Interchangeable 2" kingpin - Rear end plate functions as underrun protection - Rear mounting rail for aluminum ramps Axles and Tyres: - BPW low loader axles, each with 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, lift 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axle hydraulically forced steered via king pin coupling Floor: - Multi-layer glued plywood floor, thickness 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD, 8 t) Rodpjyiyy Uofx Abzsp Front Wall: - 25 mm aluminum hollow profiles extending up to the lower roof edge, with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable over-centre curtain straps up to a loading width of 4,000 mm including tarpaulin extension with snap fasteners and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Including eyelets for loose tarpaulin extension - 1 pair of vertical tarpaulin pockets, approx. 1,000 mm in length, positioned in the low bed at the front cranking Rear Wall: - Steel rear portal frame with lateral tarpaulin fasteners - Aluminum double-wing rear door, 25 mm thick - Both door leaves can be fully swung open with door retainers - Each door leaf equipped with an aluminum double-joint hinge and two recessed grip pockets - Rear portal extendable by 1,250 mm to the left and right Centre Pillars: - 3 pairs of continuously slidable folding pillars - Pillars are movable along the entire length via trolleys - Centre pillars in the low bed can also be fixed on the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross bows, movable in both directions - Rear portal crossbar can swing out - PVC tarpaulin roof without customs seal - Manually operated hydraulic lifting roof on both sides, 450 mm lift - Lifting roof can be driven in elevated positions at the front (9x50) and rear (9x50) - Including tarpaulin extension and tarpaulin skirt at the rear - Roof at front wall can be cranked out 900 mm each side Accessories: - 4 wheel chocks - 2 ECE plates - 1 spare wheel holder - Extendable warning boards (removable at front and rear, with socket) incl. position lights up to 4,000 mm loading width, additional locks at 3,000/3,400/3,700 mm. 1 at the front cranking, 1 at the end of the frame, plus 1 at the end of the low bed – only extendable bracket for swapping the rear warning boards - Storage for the 4 warning boards at the top inside right and left of the front wall - 1 aluminum ladder with holder, 2,500 mm long, on the front wall - 2 rows of self-locking aluminum slats, with hanging options at 100/200/300/400/500/1,000/1,500/2,000/2,500 mm - Steel mudguards with splash flaps - 1 night parking board and 1 ADR plate on the rear wall - BEKAMAX central lubrica

Condition: used, maximum load weight: 37,420 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 03/2015, loading space length: 16,900 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 3,000 mm, Year of construction: 2015, Equipment: ABS, HRD SPTM4A Mega Teleskopischen Auflieger Serial number: W09SPTM4NFEN10031 Rodpsxzmgwjfx Abzjp Erstzulassung: 24-03-2015 SAF Achsen Liftachse 2 Nachlauf Gelenckte Achsen Drum brakes with ABS and EBS Luftfederung Reifen:235/75 R17.5 40%, Total weight: 48,000 kg, Leather weight: 10,420 kg, Nutzload: 37,420 kg, Total length: 1290 cm. + 400 eskoppierbar Loading height: 95 cm. Alu Auffahrrampen Total length: 13.30 m, width 2.54 m, height 3.00 m. Container Drehverschlusse Fuer 2x20 Fuss,1x40 Fuss.,1x 20 Fuss In Die Mitte Zurrösen Rungentaschen Irrtümer / Schreibfehler und Zwischenverkauf Vorbehalten----