Low loader semitrailer

Müller Mitteltal Staufach für Alu- Rampen

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: Kjdpfx Aow Tprzsfholl * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: used, maximum load weight: 34,560 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/1989, with hydraulic suspension, hydromechanical forced steering, double telescopic loading platform, STZ-L gooseneck - robust welded steel construction - designed loading area 4,200 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - Ball bearing turntable-mounted saddle plate with interchangeable 2" king pin Loading Platform - double-telescoping, constructed as an outer-inner tube design with a fixed 950 mm long loading platform section at the front - 500 mm long intermediate table - Extension stage locking by spring-loaded cylinders and conical bolts Chassis - hydraulically suspended 3-axle running gear - SAF axle module consisting of three hydromechanically forced-steered stub axle assemblies - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Loading height 900 mm - Axle load measuring system Rear of the vehicle - straight construction Brake System - 2-line full air brake system with diaphragm actuators - automatic load-dependent braking (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - ABS system Special Equipment - Central lubrication system "BekaMax" Gooseneck Loading area (L x W): 4,200 x 2,480 mm King pin height (loaded): 1,200 mm Loading Platform Loading area (L x W): 8,500 x 2,500 mm Telescopically extendable by 11,500 mm stepwise up to (L x W) 20,000 x 2,500 mm in the bed Kodpfsxq Ni Hex Afhsll Steering 1st - 3rd axle hydromechanically forced-steered (dual-circuit steering) Power pack with override steering and remote control

Condition: used, first registration: 02/2019, Year of construction: 2019, Faymonville Multimax Semi-Trailer Kledpfx Aex T Rcpjfhol 3-axle Multimax Plus low-bed semi-trailer, air-suspended and hydraulically steered axles First registration: 18/02/2019 Further information see data sheet (photos) Vehicle sold on behalf of the customer. Interim sale, changes, and errors excepted!

Condition: used, maximum load weight: 44,000 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/1994, loading space length: 19,550 mm, loading space width: 2,500 mm, loading space height: 980 mm, total width: 2,500 mm, total height: 1,650 mm, Year of construction: 1994, Equipment: ABS, Nooteboom MCO-58-04V Semi Low Loader First registration: 30-09-1994 Drum brakes with ABS 4x SAF axles 4x hydraulically steered axles Hydraulic suspension Serial number: R020229 Tyres: 245/70 R17.5 approx. 35% Gross weight: 58,000 kg, unladen weight: 14,000 kg, payload: 44,000 kg Bed length: 9.25 m + 6.40 m extendable (telescopic) Gooseneck length: 3.90 m Kodsxz Itrepfx Afhsll Width: 2.50 m Stake pockets Lashing rings Subject to errors, misprints, and prior sale.