Tipper semitrailer

SCHMITZ CARGOBULL SKI 24 SL 7.2. Stahl, 26m³, Luft-Lift, Rollplane

Condition: used, maximum load weight: 32,726 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2018, loading space length: 7,470 mm, loading space width: 2,340 mm, loading space height: 1,450 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,050 mm, Equipment: ABS, Steel rear tipping body approx. 26 cbm, sliding tarpaulin, load gauge, HYVA tipping cylinder, towing coupling, support winch(es), ABS, EBS, SCB ROTOS axle(s), aluminum rims, disc brake system, air suspension with lifting/lowering device, lift axle, automatic lowering of air suspension during tipping, vehicle may have advertising stickers and/or decals. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we would be pleased to provide an offer from our partner workshops! Vehicle may have advertising stickers and/or decals. Our general terms and conditions of delivery and payment apply. We will be happy to provide you with a financing or leasing offer for this item. Please contact us! Phjdpfxjxv Ntcs Ahzoa

Condition: new, machine/vehicle number: dc46d2e1cd272305b99fb3160, empty load weight: 9,800 kg, maximum load weight: 31,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Psdpoi Ri Hcofx Ahzjha Vehicle consisting of: Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Quarter-shell mudguards in front of and behind axle unit 1st pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, slanted towards the entrance. Length at bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in main beam area 260 mm higher than wheel recess. 2nd pair of wheel recesses between A and B axle. Bottom length approx. 350 mm, depth approx. 260 mm. Note! Frame in main carrier area 260 mm higher than wheel recess. If wheel loaders are to be driven and the overall height is to be checked, we request a technical data sheet for the wheel loader types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses are required by the customer). Wheel recess cover can be pulled out from the main frame, with wooden inserts. Widenings extendable to 3,000 mm (not in the rear slope and not in the wheel recesses below) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on the gooseneck 11 pairs of lashing rings at the top and sides, each 10 tons, embedded in the outer frame 2 x on gooseneck9 x in low loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets 5 to. Ring lashing eyes embedded in the floor Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 x LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel / checker plate covering Storage box embedded in drive-over slope to gooseneck Then with 70 mm softwood floor, in the wheel recesses underneath and in the wheel

Condition: used, maximum load weight: 31,870 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 03/2026, total width: 2,550 mm, total height: 3,130 mm, Equipment: ABS, K.SLS ECO Lowbed Semi-Trailer with Hydraulic Ramps, As New Technical Specifications Fifth Wheel Height: 1,250 mm * Overall Length: 13,190 mm * Gooseneck Length: 3,950 mm * Platform Length: 9,240 mm * Platform Height: 875 mm * Wheelbase: 8,100 mm * Total Width: 2,550 mm * Unladen Weight: 10,130 kg * Gross Vehicle Weight Rating (60 km/h): 52,800 kg * Gross Vehicle Weight Rating (80 km/h): 48,000 kg ----Chassis BPW Axles with Air Suspension & Drum Brakes * 2x rigid axles at front, 1x self-steering trailing axle at rear * WABCO braking system * Tyres: 12 x 245/70 R17.5 * 1x spare wheel carrier on front bulkhead Phodpfxjw A D D Se Ahzea * 1x load gauge * NATO socket ----Frame High-strength S700 MC steel * Gooseneck with 90° corners * 45 mm hardwood floor * Jost landing legs, foldable at the rear * Tapered rear: 500 x 10° ----Ramps Loading ramp capacity: 40 tonnes * 2x long hydraulic ramps, laterally adjustable * 40 mm hardwood decking * Dimensions: 3,800 mm long, 850 mm wide * With ramp safety tension chain ----Load Securing & Equipment Lash rings and stake pockets with stakes * 6x container locks (for one 20-foot container) * Steel front wall (450 x 2,550 mm) * 2x aluminium side walls (360 x 1,500 mm) * 1x aluminium rear wall (360 x 2,550 mm) * Large internal toolbox in front of bulkhead * Side-mounted toolbox ----Accessories Toolbox * 1x revolving beacon * 1x work light * 2x2 oversize marker boards with LED * Wide load package: extendable supports & wooden planks ----Colour Chassis: RAL 3020 Traffic Red Please feel free to contact us for further information.