Trailer with working platform

MÜLLER-MITTELTAL 14,4 to, Tand - Plateau- Tieflader, hydr. Rampen

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation on the truck required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear external foldable support legs * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Area: * 50 mm softwood floor * Preparation for subsequent installation of container locks in front of the bulkhead * 400 mm high bolted smooth sheet metal bulkhead * Removable and bolted rear stanchions * Side panels with spring-assisted lifting mechanism ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t fold-down lashing rings every 600 mm * One 6.3 t lashing ring front and rear in each corner * Various holes in the front and rear cross member for 1.2 t lashing capability ----Ramps: * Single-piece hydraulic grid drive-on ramps, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop-down supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tank, front support winch, and flange eye painted in black Fpodsrwc R Rspfx Ah Dec * Side panels painted in RAL 9010 pure white * Painting of the side walls in a RAL color available at extra charge ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to reach 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth sheet metal bulkhead Fedpfjrwc R Ajx Ah Depc * Bolted rear stakes * Side walls with spring-assisted lift ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in the front and end crossmembers for 1.2 t lashing options ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be retracted to 20 mm) * Hydraulic flow divider in the trailer (for truck-mounted hydraulic pump output over 40 l/min up to max. 140 l/min) ----Coating: * Chassis, drawbar, bulkhead, mechanical rear supports and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange drawbar eye painted in black * Side walls painted in RAL 9010 pure white * Painting of side panels in any RAL color available as an option for a surcharge ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – without installation required on truck side * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Front support winch * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm on the right front exterior of the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the front wall for retrofitting container locks * Bolted 400 mm smooth sheet front wall * Bolted rear stanchions * Drop sides with spring assists ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings possible every 600 mm * In each front and rear corner, 1 x 6.3 t lashing point * Various holes in the front and rear crossmember for 1.2 t lashing options Fpsdjxvgriopfx Ah Dsc ----Ramps: * One-piece hydraulic grating drive-on ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Hydraulic flow divider in the trailer (for truck hydraulic output above 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical drop supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange drawbar eye painted in a black tone * Drop sides painted RAL 2011 deep orange * Side panels available in a RAL color of your choice for an additional charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex Egestorf