Low loader

Faymonville F-S42-2GXX Pendel-X 5.5 M extandable!

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Nsdsxf Silepfx Ahzswr Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: ready for operation (used), empty load weight: 13,900 kg, maximum load weight: 33,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, tire size: 245/70 R 17.5, color: grey, Year of construction: 2023, operation weight: 13,900 kg, Equipment: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck in SNT design for optimized loading platform length, length approx. 3,750 mm - Gooseneck hydraulically height-adjustable and detachable - Technical fifth-wheel load: 23,000 kg - Suitable for tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Lowbed with external beams, extendable "SUPER LOW" design, length approx. 6,850 mm - Lowbed features fixed hardwood flooring approx. 40 mm thick with mechanical locking - 5 pairs of fold-out lashing rings - 6 pairs of threaded blocks on the inner beams for mounting bolt-on RUD rings Rear Running Gear: - Rear running gear with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear Pendulum Axle and Tyres: - "PENDULUM-AXLE," all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinders with automatic reset function - Hydraulic cylinders with shut-off valves and retaining pins to secure in raised position - Axles top-coated with 2 layers of 2K paint, single-color, in grey - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 Included Accessories: - Preparation for bolt-on container locating positions for 1x 20ft or 1x 40ft container on the external beams - 2" kingpin - A galvanized steel front wall approx. 400 mm high - A spare wheel with holder - At the galvanized front connector strip, yellow-red air couplings - 4 wheel chocks with holders - Remote steering from front and rear via cable remote control with push buttons, including axle single-tracking control - Hydraulic couplings from gooseneck to lowbed with multi-coupling instead of threaded couplings - Electro-hydraulic power unit - 2 wooden blocks 500x250x200 mm - A bracket for a rotating beacon at the rear - A mudflap at the rear - European reflective signs (red-yellow) at the rear of the trailer Nwedpfow S Tt Hjx Ahzsr - On the gooseneck and rear panel, left and right, each with a bracket for warning signs including socket - Central lubrication system with 2 BEKAMAX pumps - Load gauge to determine axle loads including load chart - 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beams for mounting bolt-on RUD VLBG-4 rings - 2 pairs of bolt-on container mounts on the outer beams, incl. 2 pairs of container locks for 1x 20ft or 1x 40ft container - On the gooseneck, plug-in aluminum side and rear walls approx. 2,440 x 400 mm - A stainless steel toolbox 1,350 x 400 x 400 mm on the gooseneck - 5 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - Foldable extensions, approx. 230 mm per side - Extension planks made of hardwood - Maximum load capacity on a 200 x 200 mm area is 3.5 tons - 1 pair of steel ramps to bridge the mounting hooks of the lowbed - On the loading platform, a painted sand layer as anti-slip protection - 2 reversing spotlights on the rear panel - Spoon handle trough of the rear running gear closed at front and rear with plug-in plates - Four warning panels extendable by approx. 400 mm, approx. 423 x 423 mm, with position light - HRM metallization (High Resistance Metallisation) of the outer frame

Condition: used, color: blue, Year of construction: 2018, Broshuis 2 ABD-38 SL/1. Year: 2018. 12-ton Broshuis SL axles. Unladen weight: 13,550 kg. Payload capacity: 32,950 kg. Gross weight: 46,500 kg. Kingpin load: 22,500 kg. Hydraulic detachable gooseneck. Alloy side boards and toolbox on the neck. Extendable by 5.65 meters. 2 x 25 cm extension included (total widening). Hydraulic suspension. Power steering. Radio remote control. Zinc-coated. Dimensions: Neck: Length: 3,720 mm Width: 2,500 mm Height: 1,520 mm Kingpin height: 1,250 mm Deck: Length: 6,620 mm Width: 2,530 mm Height: 350 mm Nwodpfx Aexrfnzshzer Deck thickness: 200 mm Rear trailer section: Length: 2,830 mm Width: 2,530 mm Height: 920 mm Tyres: 245/70R17.5, 80% tread remaining. German trailer! ID No: 581. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2018 Unladen weight: 13,559 kg Payload: 32,950 kg Gross vehicle weight: 46,500 kg Extendable body: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: used, color: blue, Year of construction: 2022, Faymonville Maxtrailer F-S42-2GXX. Year of manufacture: 2022. 12-ton Pendel-X axles. Unladen weight: 12,917 kg. Payload capacity: 34,083 kg. Gross vehicle weight: 47,000 kg. Kingpin load: 23,000 kg. Hydraulic detachable gooseneck. Aluminium sideboards + toolbox on gooseneck. Spare wheel. Hydraulics controlled via NATO connection from the truck. Extendable by 5.5 meters. 2 x 25 cm hydraulic widening. Radio remote control. Hydraulic suspension. Excavator trough 2600 x 700 mm. Galvanized. Dimensions: Neck: L: 3,700 mm W: 2,450 mm H: 1,450 mm Kingpin height: 1,150 mm Floor: L: 6,850 mm W: 2,550 mm H: 350 mm Floor thickness: 200 mm Rear of trailer: L: 2,600 mm W: 2,550 mm H: 1,000 mm Tyres: 245/70R17.5 90% Like new! ID No: 509. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2022 Unladen weight: 12,917 kg Njdpjxtn I Hsfx Ahzswr Payload: 34,083 kg Gross vehicle weight: 47,000 kg Extendable body: Yes = Company information = For more information: WhatsApp: