Low loader semitrailer

Goldhofer STZ-L 6-67/80 A, 6 Achsen, 86.000kg Ges.-Gew.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high Codjrgzv Nspfx Ah Tsgp * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, empty load weight: 15,900 kg, maximum load weight: 63,500 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, loading space length: 12,700 mm, loading space width: 2,740 mm, loading space height: 860 mm, suspension: air, tire size: 235/75/r17,5, color: grey, operation weight: 52,100 kg, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,300 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For SZM: 6x2, 6x4 and 8x4 Cargo bed: Loading area in extendable design, length approx. 9,400 mm with bevel at the rear approx. 500 mm x 10° A recess in the loading area and protruding into the chamfer to accommodate the excavator dipper stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adjust to the respective loading area length Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Two-piece steel ramps: A pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm Hardwood decking Hydraulically hinged ramp tips Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards Brake system: WABCO EBS-E brake system in accordance with EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 to ensure the best corrosion protection Surface treatment: Complete steel structure automatically blasted after welding with wheel blast cleaning Second blasting with corundum for optimum adhesion of the coating system Final coating with 2 layers of 2-component paint in a single color in nova grey, followed by sealing of the cavities with special wax Cjdpfx Ajmfqi Ieh Tsgp Rims in silver gray Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Steel end wall, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM Spiral cable for supplying the electro-hydraulic unit and/or the electric cable winch between the trailer and SZM with plug Electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Outer beam of the gooseneck with fastening holes for screwable lashing rings The first hole approx. 200 mm from the front, then approx. every 400 mm One fastening hole in the rear upper area of the gooseneck outer beam for a screwable lashing ring Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide Continuous, approx. 50 mm thick hardwood planking on the loading area, interrupted between the axles Locking of the cargo bed with conically welded locking profiles every 250 mm, including pretensioning plate Slotted holes for attachable and movable bridging elements: on the fixed part behind the gooseneck on the front of the cargo bed 1 movable intermediate table, for the large cross-section extension tube Control valves for the hydraulic ramps on the right-hand side of the vehicle Central lubrication system with 1 pump, with standard grease according to NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control, with 2 indicator lights on the receiver as single-track control

Condition: used, functionality: fully functional, mileage: 7,500 km, power: 390 kW (530.25 HP), first registration: 12/2023, fuel type: diesel, axle configuration: 6x4, color: white, driver cabin: sleeper cab, Equipment: ABS, AdBlue, additional headlights, airbag, all wheel drive, differential lock, hydraulics, onboard computer, parking heater, Road tractor with semi-trailer (not sold separately) for exceptional transports. Semi-trailer with 3 steering axles – Extendable bed for exceptional transports. Brand new. Cjdpjxrcwgjfx Ah Tjgp

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 14,600 mm, loading space width: 2,550 mm, loading space height: 880 mm, total length: 14,600 mm, total width: 2,550 mm, total height: 880 mm, suspension: air, tire size: 245 / 70 R17.5, color: blue, Year of construction: 2008, Equipment: tail-lift, Color: Blue Loading capacity: 72,600 kg Loading floor height: 885 mm Extendable Braked Cjdpfjx R Undox Ah Tsgp Main Features Manufacturer: Goldhofer Model: STZ L6 65/80A Semi Low Loader with Ramps Chassis number: WG0STZL6A80030419 Year of manufacture: 2008 Weights/Loading Capacity Fifth-wheel load: 26,000 kg Axle load: 11,200 kg Total axle load: 6x 11,200 kg = 67,200 kg Gross vehicle weight (GVW): 93,200 kg Unladen weight: 20,600 kg Payload: 72,600 kg Axles Axle brand: BPW Air suspension 1st axle rigid Axles 2 - 6 with hydraulic steering 1st & 2nd axles liftable High/low valve Braking system: WABCO Tyres: 245 / 70 R17.5 Dimensions Length: 14,600 mm Extensions: +7,200 mm Maximum extended length: 21,800 mm Loading floor width: 2,550 mm Height: approx. 885 mm - 925 mm Fifth-wheel height: +/- 1,350 mm Additional Information • PTO operated from truck • Lashing rings • Stake pockets • Partially wooden loading floor • Mechanical landing gear • Hydraulic loading ramps • Extendable loading floor • Rear bumper with lights • 3.5" king-pin • Central lubrication • "Oversize load" marker boards • Radio remote control • Outriggers • Toolbox on gooseneck = Further Information = General Information Year of manufacture: 2008 Axle Configuration Tyre size: 245 / 70 R17.5 Axle make: BPW Eco Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; max. axle load: 11,200 kg Rear axle 2: Twin tyres; lift axle; max. axle load: 11,200 kg; steered Rear axle 3: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 4: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 5: Twin tyres; max. axle load: 11,200 kg; steered Rear axle 6: Twin tyres; max. axle load: 11,200 kg; steered Weights Unladen weight: 20,600 kg Payload: 72,600 kg Gross vehicle weight: 93,200 kg Functional Body brand: WABCO Loading platform height: 88 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 08/2008, next inspection (TÜV): 12/2025, loading space length: 15,800 mm, total width: 2,550 mm, Equipment: ABS, Goldhofer Lowbed Trailer with Gooseneck - 5 axles - 1st axle liftable - Last four axles forced steered - Central lubrication system - BPW axles - Tyre size: 235/75 R17.5 - Drum brakes - Permissible gross weight: 70,000 kg - Unladen weight: 17,900 kg Cedpfx Ahjw S S Uvo Tjgp - Safety inspection due: TÜV due: 12/2025 - Loading height: 0.85 m - Loading width: 2.55 m - Lowbed length: 12.0 m - Gooseneck length: 4.0 m - Extendable up to 24.4 m total trailer length Errors and prior sale excepted. Internal vehicle number: 11177 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, maximum load weight: 62,400 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, first registration: 11/1997, with hydraulic suspension, hydromechanical forced steering, double-telescopic loading platform, with rear bevel Hydraulically adjustable gooseneck - Finished loading platform: 3,700 x 2,480 mm - Hydromechanical forced steering (2-circuit steering system) - Ball bearing-mounted fifth wheel plate with replaceable 3.5" kingpin and adjustable steering wedge - Steering angle radius to the rear: 2,700 mm - Fifth wheel load: 25,000 kg Loading platform - Double-telescopic, designed as an outer-inner tube construction with 1,000 mm fixed front platform section - 500 mm intermediate table Chassis - ABS - Hydraulically suspended 6-axle chassis - SAF axle units, consisting of 5 forced-steered stub axles and 1 rigid axle - Axles equipped with adjustable tapered roller bearings and automatic slack adjusters (AGS) Vehicle rear - Tapered rear design, 500 mm - Mechanical rear support legs Cgjdpfxjwy A T He Ah Tsp Special equipment - Electro-hydraulic power unit - Radio remote control - Lifting function (load-dependent) for the 1st and 2nd axles Ramps: two-piece, hydraulically operated 2,900 mm + 1,700 mm, 850 mm wide Dimensions: Length 16,400 mm – 32,900 mm Unladen weight: 22,600 kg Technical Data Gooseneck Loading area (LxW): 3,700 x 2,480 mm Loaded fifth wheel height: 1,300 mm Steering angle radius: 2,700 mm Fifth wheel load: 25,000 kg Loading platform Loading area (LxW): 13,000 mm x 2,750 mm Telescopic extension: 2x (8,000 mm + 8,500 mm), total bed length 29,500 mm Driving position height: 900 mm (+/-130 mm) Steering 1st axle: steerable ahead of load 2nd–6th axles: hydromechanically forced-steered (2-circuit steering system)