Low loader

NOOTEBOOM OSDS-41 KG

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with angled front corners at 45° and rear taper of approximately 750 mm x 10° •3 pairs of lashing rings •Hardwood decking, 30 mm thick Extendable platform: •Extendable platform with rear taper of approximately 1,000 mm x 8° •Cutouts in the outer frame of the platform for attaching lashing straps •Hardwood decking approximately 48 mm thick, with chequered plate decking over the axles Two-piece steel ramps: •One pair of galvanized, two-piece steel ramps with approximately 48 mm thick hardwood decking •Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable •Maximum load per pair: approximately 40,000 kg Axles and tires: •BPW axles and suspension, 2 fixed axles, 1 steered axle •Technical axle load: 12,000 kg •Electro-magnetic reversing lock activated via reverse gear and manually •Air suspension with lifting and lowering valve Ledpehlz S Nsfx Ai Terp •Axle tool •235/75 R 17.5 3PMSF Braking system: •WABCO braking system according to EU regulations with EBS-E Paint finish: •First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component zinc dust primer •High-quality 2-component topcoat, single-color in MB 7350 Novagrau •Rear section metallized and painted in RAL 9010 Kingpin: •JOST kingpin with 2-speed gearbox for 24t lifting capacity (50t test load). Steel structure: •Steel structure made of high-strength fine-grain steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system according to EU regulations, lighting 24 volts •ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S and 15-pole sockets Included accessories: •One spare wheel with holder •One galvanized steel front bulkhead, approximately 400 mm high •Yellow-red air couplings on the galvanized connection strip at the front •4 chocks •One holder for a rotating beacon at the rear of the semi-trailer •Mounting in the rear area of the gooseneck for aluminum support ramps •Galvanized folding supports under the taper of the platform •Cover plates to bridge the gap between ramps and platform •White reflector tape according to EU regulations on the side, on the extension and at the rear in red •Electro-hydraulic unit at the rear, under the platform •On the gooseneck and on the ramps, one holder each on the left and right for warning signs including socket •Control valves for the ramps mounted on the right side of the semi-trailer •Aluminum side and rear walls on the gooseneck, approximately 2,440 x 400 mm •The rear, galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) •Four warning signs that extend by approximately 400 mm with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the platform •Extensions, galvanized, extendable by approximately 230 mm on each side •Square ladder rails 20 x 20 mm every 200 mm on the outer frame of the platform taper •A lacquered sand layer as an anti-slip coating on the chequered plates, over the kingpin and the platform •Load manometer for determining axle loads, including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel structure bead-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: used, functionality: fully functional, empty load weight: 16,300 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: other, tire size: 205/65 R 17,5, color: green, Equipment: ABS, EBS, - 5 axles: 1st axle friction-steered and liftable; 2nd–5th axle hydraulically steered - Extendable: 6,200 mm (total length: 12,800 mm – 19,000 mm) - SAF axles Lredpfx Aijymnmwj Tep - Sliding hydraulic double ramps with support legs - Lifting and lowering device - Drum brakes - Suspension: air-lift Errors and omissions excepted.

Condition: new, maximum load weight: 34,104 kg, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Further information here: Lsdpfx Aov D Abgoi Tjrp

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,300 kg, permissible axle load (axle 2): 10,300 kg, permissible axle load (axle 3): 10,300 kg, first registration: 08/2013, suspension: air, tire size: 265/70R19.5, color: blue, Year of construction: 2013, = Further options and accessories = - Air suspension = Notes = HRD STTM3N - Low loader - Extendable - SAF axle - Steering axle MY: 7-8-2013 W09STTM3NCEN10148 Extendable Steering axle SAF axle = Further information = Axle configuration Tyre size: 265/70R19.5 Axle brand: SAF Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 10,300 kg; Tyre tread depth left inner: 60%; Tyre tread depth left outer: 255%; Tyre tread depth right inner: 60%; Tyre tread depth right outer: 60% Rear axle 2: Twin tyres; Max. axle load: 10,300 kg; Tyre tread depth left inner: 60%; Tyre tread depth left outer: 60%; Tyre tread depth right inner: 60%; Tyre tread depth right outer: 60% Rear axle 3: Twin tyres; Max. axle load: 10,300 kg; Steering; Tyre tread depth left inner: 60%; Tyre tread depth left outer: 60%; Tyre tread depth right inner: 60%; Tyre tread depth right outer: 60% Weights Lrjdpfx Aijy Rxrme Tjp Unladen weight: 10,800 kg Payload: 40,100 kg Gross vehicle weight: 50,900 kg Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: used, maximum load weight: 49,900 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 01/2020, next inspection (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single-extendable load platform, wheel recess, with rear bevel and loading ramps Dimension B: 11,300 mm Unladen weight: 15,100 kg STZ-L gooseneck - Robust steel welded construction - Formed load platform: 3,900 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) - 5th wheel plate with ball bearing slewing ring and interchangeable 2" king pin, with adjustable steering wedge - Mechanical landing legs at the front Load platform - Single-telescoping, designed as an outer-inner tube construction with a 300 mm fixed front deck section - 300 mm sliding table on the inner tube, adjustable and lockable - Extension stage locking via spring-applied cylinder and conical locking pin - 1 pair of wheel recesses after the 1st axle, depth 410 mm Chassis - 4-axle, air-suspended chassis - 1st axle liftable and steered in the forward direction - SAF axle assemblies, consisting of three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic brake rod adjusters (AGS) - Standard raise/lower valve for lowering to min. 805 mm or raising to max. 1,050 mm - Loading height: 860 mm - Excavator arm recess: 3,850 mm long, 750 mm wide - Wheel recess after gooseneck: 410 mm deep - Wheel recess after the 1st axle: 410 mm deep Vehicle rear - "Bevelled" design at 500 mm - Short rear overhang: 1,240 mm measured from the center of the last axle - Hydraulic rear supports Loading ramps - 2-piece ramps, length: 2,855 mm / 1,415 mm, width: 890 mm - Hydraulically adjustable ramps Braking system - 2-line full air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic brake rod adjusters (AGS) - Parking brake via spring-applied cylinders - Anti-lock braking system (ABS) Special equipment - Wheel recess - Excavator arm recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical data Gooseneck Lsdey Iq Tdspfx Ai Terp Load platform (LxW): 3,900 x 2,480 mm 1,000 mm Wirtgen slope Fifth wheel height when loaded: 1,250 mm Load platform Load platform (LxW): 8,800 x 2,550 mm Telescoping extension: 2,800 mm Stepwise extension to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered in forward direction 2nd-4th axle hydromechanically force-steered (dual-circuit steering) Radio remote control Electric power unit

Condition: excellent (used), mileage: 1,582 km, power: 520 kW (707.00 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: intarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 10,700 mm, total width: 2,550 mm, total height: 3,600 mm, loading space length: 8,200 mm, loading space width: 2,550 mm, loading space height: 1,120 mm, Year of construction: 2026, Equipment: AdBlue, Bluetooth, air conditioning, airbag, central locking, differential lock, electric window regulation, fog lights, navigation system, onboard computer, power assisted steering, power mirror, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Differential lock - Low-noise - Speed limiter - Air suspension - Air horn - Rearview camera - Sun visor - Toolbox - Power take-off (PTO) - Tow hitch = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Axle Configuration Front axle 1: Steerable Front axle 2: Steerable Rear axle 1: Lift axle; Steerable Weights Unladen weight: 15,480 kg Payload: 19,520 kg GVW: 35,000 kg Functional Body brand: WIESE MACHINE TRANSPORTER Loading platform height: 112 cm Maintenance, History and Condition APK (Technical Inspection): New TÜV (German technical inspection) upon delivery Technical condition: very good Optical condition: very good MAN TGS 35.520 H Ramp Truck / Machine Transporter / Flatbed EURO 6 L PACKAGE 520 HP DRIVE 8x2 HYDRODRIVE, REAR AXLE LIFTING AND STEERING WHEELBASE 530 CM AIR SUSPENSION DIFFERENTIAL LOCK TGS SLEEPER CAB WITH FULL EQUIPMENT: AIR CONDITIONING, NAVIGATION, REFRIGERATOR AUTOMATIC TRANSMISSION WITH RETARDER TOW HITCH Lrodpfx Aiszata No Tsp LED LIGHTING LENGTH OF LOADING PLATFORM 820 CM LENGTH OF LOADING PLATFORM HEIGHT ± 112 CM EQUIPPED WITH 2 LARGE, ADJUSTABLE HYDRAULIC RAMPS 290 CM X 98 CM, DIVIDED LARGE WINCH WITH WIRELESS REMOTE CONTROL 2 WINCHES AT THE REAR TOOLBOXES FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES THAT WE OFFER FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, axle configuration: 3 axles, first registration: 01/2012, total length: 13,700 mm, total width: 2,550 mm, total height: 3,300 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2012, Equipment: ABS, = Additional options and accessories = - Drum brakes = Remarks = Lsdpfx Aiox U D Alo Tsrp Chassis Kingpin / fifth wheel diameter: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Special Transport 2-piece ramps: ✓ Hydraulic ramps: ✓ Length above axles: 900 cm Length of loading floor: 900 cm Gooseneck length: 360 cm Max width: 290 cm (250+20+20) Extendable: × Semi-lowbed trailer, Max gross weight 48000 kg, Load bed lenght 900 cm, Goosneck lenght 360 cm, Hydraulic ramps, Electric winch, Tire size 245/70 R17.5, ABS, Drum brakes, SAF axles, Air suspension Shipment dimensions 1370x255x1360 cm = More information = Axle configuration Tyre size: 245/70 R17.5 Make axles: Saf Brakes: drum brakes Suspension: air suspension Front axle: Double wheels; Tyre profile left inner: 40%; Tyre profile right outer: 25% Middle axle: Double wheels; Tyre profile left inner: 50%; Tyre profile right outer: 40% Rear axle: Double wheels; Tyre profile left inner: 15%; Tyre profile right outer: 25% Weights Empty weight: 11.000 kg Carrying capacity: 37.000 kg GVW: 48.000 kg Identification Registration number: C340521 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 52,500 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, loading space height: 980 mm, total length: 13,550 mm, total width: 3,000 mm, total height: 3,565 mm, suspension: air, tire size: 245/70 R 17,5, tire condition: 100 %, wheelbase: 1,360 mm, maximum speed: 100 km/h, color: grey-black, Year of construction: 2026, NÜKTE – CETRATEK 4-Axle Lowbed Semi-Trailer Powerful. Robust. Built for tough applications. The NÜKTE – CETRATEK 4-axle lowbed semi-trailer stands for maximum stability, high payload, and uncompromising everyday reliability in professional heavy-duty transport. Featuring a massive 4 x 10 tonne axle layout on robust TRAX axles, durable air suspension, and a high-strength I-beam chassis made of S355J2+N quality steel, this lowloader is the ideal solution for transporting construction equipment, agricultural machinery, wheel loaders, excavators, and heavy equipment. Even the standard configuration impresses with thoughtful, field-oriented features: The first TRAX axle is a lift axle, significantly reducing tire wear and improving maneuverability when running unladen. The fourth TRAX axle is steerable, allowing precise maneuvering even on tight construction sites and operating yards. A particular highlight is the hydraulically operated, laterally adjustable one-piece loading ramps, enabling fast, safe, and convenient loading and unloading. Each ramp is rated for a 20-tonne load, making it perfect for heavy machinery and vehicles. Maximum loading stability is provided by the standard hydraulic rear supports, including mechanical drop legs. Convenient operation is provided either via a hydraulic remote control or directly at the vehicle, allowing all ramp and support functions to be controlled safely and efficiently. The trailer also sets standards in terms of quality: the entire frame is shot-blasted, primed, and finished with a high-quality, double-layer 2K paint system. We offer a 5-year warranty on the paintwork. The loading platform is fitted with 55 mm Dabema hardwood, with additionally reinforced chequer plate in the high-stress areas for extra protection. A high-quality Aspöck ADR-certified electrical system ensures maximum operational safety and meets the highest standards for professional road use. With a loading area length of 9,000 mm, width of 2,550 mm plus 250 + 250 mm side extensions, total length of 13,550 mm, platform height of 980 mm, and a permissible gross weight of 64,000 kg, this lowbed is optimally designed for daily heavy-duty applications. The fifth wheel load is 24,000 kg, total axle load is 40,000 kg (4 × 10 t). Further standard equipment includes: - WABCO EBS 4S/2M - Air suspension - 16 + 1 tyres - 245/70 R 17.5 - Galvanized 12-ton lashing rings - Toolboxes - Spare wheel - Aluminium covers on the gooseneck - Side extensions - Wooden floor on the platform Quality that convinces The high-quality coating using a modern 2K paint system, robust Dabema hardwood, and additionally reinforced chequer plate ensures exceptional durability—even under the toughest conditions of daily construction and heavy-duty use. CETRATEK – Technology you can rely on. Technical and pricing changes reserved. All illustrations are sample images and may contain special or optional equipment. Lredjy Awchepfx Ai Top

Condition: new, Year of construction: 2024, Equipment: ABS, = Further options and accessories = - Electronic braking system (EBS) - Lifting axis - Spare wheel = Notes = TECHNICAL SPECIFICATIONS MEASURES & DIMENSIONS -Gross Vehicle Weight (kg): 70,000 -Loading Platform Length (mm) : 9,000 -Weight of Axle Group (kg): 48,000 -Total Lenght (mm): 13,550 -Kingpin Capacity (kg) :22,000 -Total Width (mm): 2,550 -Curb Weight (kg): 13,000 -Loading Platform Height (mm): 920 -Pay Load (kg): 57,000 -Height of 5th Wheel (mm) : 1,310 CONSTRUCTIONS -Base chassis -Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis -Outer frame is UPE 240 profile -Welding (Chassis) : Automatic ARC submerged -Welding (Superstructure): Automatic robot welding -Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand -Drum brakes 4 x 12 Ton axles -Axle Lifting: 1st axle automatic 4th axle manual lifting -Suspension (Type): Air Suspension -Steering Axles :- -King pin (Type) : 1 position with 1x coupling-pen 2” -Tires: 16+1 units, 245 / 70 R 17.5 -Rims: 16+1 units, 6.75 x 17.5 steel rims -Landing Gear: Mechanically operated by one side, two speed -Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation -Brake Chamber -2 axles with 4 units emergency brake chambers. -2 axles with 4 units service brake chambers. Electric system -24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA Brand -2 x Rear Stop Lights. - 4 x Side LED Lights -2 x White LED Lights - 2 x Front LED Lights -2 x Registration Plate Lights - 2 x rotating Lights Floor Ledpfx Asy E Nxaji Tjrp -Above tires and edges of platform are covered checkered sheet and hard wood -The middle surface is covered by flat sheet steel Rear loading ramps -Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable -push button for remote control -Folding type rear ramps length 2500 mm +1500 mm width 900 mm -Rear ramps are sliding internal and external hydraulic -Short steel ramps behind neck. Paint Application -Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint TECHNICAL SPECIFICATIONS ACCESSORIES -2 x 8 pcs of heavy duty lashing rings mounted on the outer frame mushroom type -4 x Certificated Expray mud flaps. -1 x Plastic water tank -2 x Wheel chocks and holders -2 x 8 Galvanized side extensions brackets 250 mm + 250 mm -2 x Side Protections, aluminum -1 x tool box. -1 x spare wheel carrier with 1 tire (on the gooseneck) -2 x manual support legs at the rear. -2 x Reflective tape and reflector sign at the rear and sides. -2 x side extension reflectors -Steel front panel(height:400mm) -Aluminum side panels on gooseneck section(height:400mm) -1 plaque places on rear ramps or bumpers = Further information = Curb weight: 13,000 kg CE marking: yes

Condition: new, Year of construction: 2024, Equipment: ABS, = Further options and accessories = - Electronic braking system (EBS) - Lifting axis - Spare wheel = Notes = TECHNICAL SPECIFICATIONS MEASURES & DIMENSIONS -Gross Vehicle Weight (kg): 70,000 -Loading Platform Length (mm) : 9,000 -Weight of Axle Group (kg): 48,000 -Total Lenght (mm): 13,550 -Kingpin Capacity (kg) :22,000 -Total Width (mm): 2,550 -Curb Weight (kg): 13,000 -Loading Platform Height (mm): 920 -Pay Load (kg): 57,000 -Height of 5th Wheel (mm) : 1,310 Lrsdsyil Ihjpfx Ai Tjp CONSTRUCTIONS -Base chassis -Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis -Outer frame is UPE 240 profile -Welding (Chassis) : Automatic ARC submerged -Welding (Superstructure): Automatic robot welding -Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand -Drum brakes 4 x 12 Ton axles -Axle Lifting: 1st axle automatic 4th axle manual lifting -Suspension (Type): Air Suspension -Steering Axles :- -King pin (Type) : 1 position with 1x coupling-pen 2” -Tires: 16+1 units, 245 / 70 R 17.5 -Rims: 16+1 units, 6.75 x 17.5 steel rims -Landing Gear: Mechanically operated by one side, two speed -Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation -Brake Chamber -2 axles with 4 units emergency brake chambers. -2 axles with 4 units service brake chambers. Electric system -24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA Brand -2 x Rear Stop Lights. - 4 x Side LED Lights -2 x White LED Lights - 2 x Front LED Lights -2 x Registration Plate Lights - 2 x rotating Lights Floor -Above tires and edges of platform are covered checkered sheet and hard wood -The middle surface is covered by flat sheet steel Rear loading ramps -Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable -push button for remote control -Folding type rear ramps length 2500 mm +1500 mm width 900 mm -Rear ramps are sliding internal and external hydraulic -Short steel ramps behind neck. Paint Application -Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint TECHNICAL SPECIFICATIONS ACCESSORIES -2 x 8 pcs of heavy duty lashing rings mounted on the outer frame mushroom type -4 x Certificated Expray mud flaps. -1 x Plastic water tank -2 x Wheel chocks and holders -2 x 8 Galvanized side extensions brackets 250 mm + 250 mm -2 x Side Protections, aluminum -1 x tool box. -1 x spare wheel carrier with 1 tire (on the gooseneck) -2 x manual support legs at the rear. -2 x Reflective tape and reflector sign at the rear and sides. -2 x side extension reflectors -Steel front panel(height:400mm) -Aluminum side panels on gooseneck section(height:400mm) -1 plaque places on rear ramps or bumpers = Further information = Curb weight: 13,000 kg CE marking: yes