Tipper semitrailer

FLIEGL DHKS 390, Stahl, 50m³, Schrottmulde, TOP-Zustand

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Pgjdevuhcqspfx Ah Dow Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Pgsdpfx Ajgcw Rmeh Dow Accessories 6 PV

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air, lift, MB disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguard, UFS foldable, trough made of HB 450 floor 4mm, side walls 3.2mm thick, rear wall 1/2 + 1/2, ladder and walkway, roof frame, loading pressure gauge, 2xWZK, roll-up tarpaulin with central locking Pgjdsuwhruepfx Ah Dow

Condition: used, empty load weight: 5,600 kg, maximum load weight: 25,900 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 10/1993, loading space length: 6,800 mm, loading space width: 2,340 mm, loading space height: 1,200 mm, loading space volume: 19 m³, total length: 2,500 mm, total width: 3,100 mm, suspension: air, tire size: 385 / 65 R 22,5, color: grey, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, air-sprung, roller tarpaulin, catwalk, flap, folding U-protection, chute Body: Aluminum box body approx. 19m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pgedpfx Ahjvhhm Aj Dew - .

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Pgsdpfxegcw Rio Ah Dew Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, functionality: fully functional, mileage: 400,000 km, power: 331 kW (450.03 HP), first registration: 05/2014, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 18,000 kg, gearing type: semi-automatic, emission class: euro5, Year of construction: 2014, Equipment: ABS, additional headlights, cruise control, differential lock, hydraulics, retarder, trailer coupling, Scania G450 skip loader with Meiller AK12 body and ISAR 3 remote control. Pedoxam Rmepfx Ah Dsgw

Condition: used, mileage: 351,885 km, power: 294 kW (399.73 HP), first registration: 12/1996, overall weight: 26,000 kg, fuel type: diesel, color: green, axle configuration: 6x2, maximum load weight: 14,200 kg, empty load weight: 11,800 kg, tire size: 315 / 80 R 22,5, wheelbase: 4,200 mm, brakes: constant throttle, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, total length: 2,500 mm, total width: 3,250 mm, number of seats: 2, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 16, ABS (anti-lock braking system), constant throttle, air suspension, tow bar air-light-hydr., environmental badge red Pgodpfx Aevhg Ryoh Dow Wheelbase: 4200 mm Body: Marrel hook MA 26.70 for 6.5 m container VA wheels 385 / 65 R 22.5, 6-cylinder turbo engine!!! converted to 6x2 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 707,298 km, power: 368 kW (500.34 HP), first registration: 08/2013, overall weight: 26,500 kg, fuel type: diesel, color: white, axle configuration: 6x2, maximum load weight: 14,000 kg, empty load weight: 12,500 kg, tire size: 315/80 22,5, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, operating hours: 707,298 h, tire condition: 50 %, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, number of beds: 1, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, trailer coupling, truck registration, Vehicle reference number for inquiries: 40183 Scania, R 500 * Year of manufacture: 2013 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * Electric window lifters * Cab * Air conditioning * Air suspension * Lift axle * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * On-board computer * Differential lock * Duomatic air connection * Spare wheel carrier with spare tire * Lifting and lowering device * Storage box / toolbox * Digital tachograph * CD radio * OBU pre-installation * Refrigerator * Electric windows & mirrors * AdBlue tank * Fog lights * Comfort air-cushioned seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic * Suspension: leaf / air * Gross vehicle weight: 26,500 kg * Unladen weight: 12,500 kg * Payload: 14,000 kg * Permissible total weight: 26,500 kg Pgjdoxpc Ruopfx Ah Dsw * Tire condition 1st axle: 60% -- 60% - Tire size: 315/80 R22.5 * Tire condition 2nd axle: 80%|80% -- 50%|50% - Tire size: 315/80 R22.5 * Tire condition 3rd axle: 40%|40% -- 40%|40% - Tire size: 315/80 R22.5 * Tire sizes: 315/80 R22.5 * Body: Meiller RK20.65 Disclaimer: Specifications subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our extensive range of services includes: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Procurement of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer and delivery of commercial vehicles Speak to our trained professional staff—we are happy to advise you.

Condition: used, empty load weight: 8,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2019, loading space volume: 60 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, | Stas FSS Ferrostar 60m³ steel body | ABS / EBS | SAF axles | disc brakes | lift axle | tires: 385/65 R 22.5 | platform front | portal doors rear | roller tarpaulin | lifting and lowering system | suspension: lift / air / air | walls and floor made of Hardox 450 | LED work lights | folding rear underride guard | loading dimensions: | length: approx. 11000mm | Width: approx. 2,430mm | Height: approx. 2,280mm | Volume: 60m³ | Empty weight: Pjdpfswwld Aex Ah Dsgw