Mobile excavator

LIEBHERR R904 HDSL LITRONIC

Condition: used, Year of construction: 2005, operating hours: 6,136 h, 2005 | Liebherr R 904 C Litronic Hdsl | Used Tracked Excavator | 6136 hours Bodpfx Aoy H Sl Sek Toll 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 30700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 66 inspection points 58 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the machine. It has worked little, the original hours are on the hour meter, the screen has been completely changed to new. The pump is also completely new. "Old" machine with few hours. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40722 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 290,000 km, power: 335 kW (455.47 HP), first registration: 07/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: green, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, Special Equipment: Emission Standard: EURO 5 EEV, Trailer coupling: Tow coupling, Trailer coupling: Central axle trailer G 250, Audio system: Comfort CD radio (Bluetooth), Battery 220 Ah, CB radio, Air horn(s) on cab roof, Cab: Movable cab entry, 16-speed transmission, Fuel tank: 300 liters, aluminum, Reinforced clutch, Air filter: Construction vehicle filter, Seats in cab: Comfort driver's suspension seat, Sun visor, Front bumper in steel design, Cross member for trailer coupling, Foldable rear underrun protection (Meiller), Additional step for construction vehicles, Transmission oil cooler Bjdpfx Akozfw Rno Tell Additional Equipment: Axle configuration: 6x4, Trailer brake 2-line, Trailer socket 24V / 15-pin, Exterior mirrors electrically adjustable and heated, Wide-angle and heated exterior mirror (left), Outside temperature display, Roof hatch (steel), Rear axle differential lock, Cab: Suspension for rough roads (6.0 HZ), Cab: M (medium length), Suspension: Leaf/leaf, Alternator 80 A, Rear axle H 6, ring gear 440, Hydraulic pump (Meiller pump - 6 pistons), Body/superstructure: Chassis for tipper (additional AV), Body/superstructure: Tipper, Engine 12.0 L - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, PTO MB 2C, Wheelbase 3300 mm, Rear window, Front axle disc brake, Steel rims 9.00x22.5, Telligent gearshift, Telligent brake system with ABS+ASR, Rear axle drum brake, CB radio pre-installation, Telephone/fax pre-installation, Straight front axle, Immobilizer, Heat-insulating glazing, Central locking incl. key, Perm. total weight 26.0 t

Condition: used, mileage: 265,300 km, power: 180 kW (244.73 HP), first registration: 07/2004, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2027, color: grey, gearing type: mechanical, emission class: euro3, loading space length: 4,000 mm, loading space width: 2,330 mm, loading space height: 90 mm, Equipment: ABS, Due to the countless phishing and spam emails, email inquiries can only be processed if you provide your valid telephone number! Unfortunately, we cannot process email inquiries without a telephone number! We ask for your understanding. For telephone inquiries and WhatsApp, please contact us regarding: * First owner * 6-cylinder engine Bodpfjzt E Azox Ak Tjll * Hydraulic connection for a three-way tipper trailer * 8-speed manual transmission with crawler gear, dual H-pattern * Meiller three-way tipper * Front axle load: 5,000 kg * Rear axle load: 9,200 kg * Gross vehicle weight: 30 t * Sideboards: 500 mm steel + 400 mm aluminum * Wheelbase: 3,200 mm * Leaf spring suspension * Rear axle differential lock * Trailer hitch * Electric windows * Heated rearview mirrors * Tires: 10R22.5 Errors and prior sale excepted.

Condition: used, Year of construction: 2013, operating hours: 4,131 h, Equipment: all wheel drive, * Driver's suspension seat * Exhaust behind the driver's cab Bodporbcw Aefx Ak Toll * Maneuvering jaw ----Construction: ROPS driver's cab heated, rear window heating, Komatsu 4-cylinder diesel engine, 50 KW, 20 km/h, articulated steering, hydrostatic drive, hydraulic quick-change system, 2 additional hydraulic connections, max. dumping height: approx. 2,420 mm. Accessories: 1m³ bucket/weight: 422kg, pallet fork with 2,500kg load capacity. Only sold to businesses. ONLY THE NET PRICE IS PAYABLE FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, mileage: 753,877 km, power: 301 kW (409.25 HP), first registration: 03/2002, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, loading space length: 4,200 mm, loading space width: 2,400 mm, Equipment: air conditioning, crane, MAN Tga 18.413 FLLT 4x2 3-way tipper Manual transmission Air conditioning Air suspension front and rear Euro 3 VIN: WMAH09ZZZ2M343901 Unladen weight: 8,600 kg Payload: 9,325 kg Gross weight: 18,000 kg Bljdpeq Dy H Ujfx Ak Tsl Wheelbase: 3,600 mm Tipper length: 4.20 m Tipper width: 2.40 m Vehicle length: 6,400 mm Vehicle width: 2,550 mm Vehicle height: 3,250 mm Truck tachograph inspection valid until 2024 Truck technical inspection (TÜV): 03/2023 Year of manufacture (truck): 2022 With removable rear crane Palfinger PK 7000 2 hydraulic extensions Serial no.: 8931268 With rotator grab connections With raised platform Crane inspection (TÜV): 12/2022 Year of manufacture (crane): 1989 ----Price net All information without guarantee Tel./WhatsApp:

Condition: used, mileage: 490,000 km, power: 228 kW (309.99 HP), first registration: 12/2001, overall weight: 17,990 kg, gearing type: mechanical, Equipment: ABS, air conditioning, * MAN TGA 18.310 THREE-SIDED DUMP TRUCK * MANUAL TRANSMISSION, AIR CONDITIONING * SPRING, SPRING * PALFINGER PK11001 C 4x HYDRAULIC CRANE * All information without guarantee Bedpfxszvuhre Ak Tsll * Subject to differential taxation, no VAT!

Condition: new, empty load weight: 13,250 kg, maximum load weight: 47,550 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, suspension: air, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform in extendable version: Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 40,000 kg Seat posts: JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 245/70 R 17.5 Bjdel Uxdkopfx Ak Tjll Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel end wall approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 4 restraining shoes with holder on the bulkhead One spare wheel with holder in front of the bulkhead Electro-hydraulic unit Re-steering from the front and rear by means of cable remote control operated via pushbuttons with tracking control of the axles Mounting in the rear area of the gooseneck for ALU docking lights European reflector plates (red/yellow) at the rear of the trailer White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red On the gooseneck and on the ramps on the left and right, a holder for the warning signs including a socket A bracket for a rotating beacon at the rear of the trailer Galvanized folding supports under the sloping loading area Operating valves for the ramps fitted on the right-hand side of the trailer Cover plates to bridge the gap between the ramps and the cargo bed A mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm The rear galvanized stanchions are removable Length of the body approx. 2,560 mm One tool box INOX 1,350 x 400 x 400 on the gooseneck Box covered oil filler plug 4 pairs of WADER container pockets in t

Condition: used, mileage: 1,345,000 km, power: 370 kW (503.06 HP), fuel type: diesel, gearing type: automatic, emission class: euro4, wheelbase: 670 mm, Year of construction: 2007, Intended use: Goods transport Engine displacement: 15,928 cc Gross vehicle weight (GVW): 26,000 kg External dimensions: 13.89 Please contact Thomas Lund for further information. Bedpsy T Nmmofx Ak Tjll

Condition: used, mileage: 1,009,892 km, power: 350 kW (475.87 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 7,892 kg, maximum load weight: 11,108 kg, overall weight: 19,000 kg, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 08/2025, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: none, suspension: air, number of beds: 2, front tire size: 315/70 R22.5, rear tire size: 315/70 R22.5, number of seats: 2, maximum speed: 90 km/h, Equipment: ABS, air conditioning, cabin, central locking, cooling unit, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, low noise, onboard computer, parking heater, spoiler, traction control, truck registration, Sales contact persons: Frank Rau / Russian / English / German - Bachar Ibrahim / Arabic / English / German - Registration service, general inspection (HU), periodic inspection (SP)/accident prevention (UVV), transfer to port 16-speed gearbox, environmental badge: 4 (green), automatic transmission, diesel, Euro 6c, rear axle drive, air conditioning, base color: black Equipment extras: ABS, adaptive cruise control, airbag, onboard computer, differential lock, ESP, ready to drive, driver's sleeping compartment, hydraulic system (power take-off), cabin, cooling unit, truck registration, alloy wheels, low noise, fog lights, tiltable upper structure, price on request (Mobile), retarder/intarder, spoiler, auxiliary heater, cruise control, traction control, video system, immobilizer, central locking, suspension: air, payload(kg): 11,108, sustained-action brake (marketplace): retarder Bljdpfxoxn D Ure Ak Tol Body type: DB ACTROS 1848 2017 BigSpace Retarder Spoiler Moving-floor hydraulics 4x2, HSN/TSN: 1313/BTP000 Subject to errors. Search fields: adaptive cruise control

Condition: new, empty load weight: 14,800 kg, maximum load weight: 61,700 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Bsdpema Hf Rjfx Ak Tsll -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings -Hardwood decking 30 mm thick Loading area: -Loading area in extendable design with rear bevel of approx. 500 mm x 8° -9 pairs of lashing rings can be folded outwards -1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles and suspension, 1st axle self-steering, 2nd + 3rd axle rigid, 4th + 5th axle self-steering. -Technical axle load: 12,000 kg -1.4th and 5th axle with electro-magnetic reverse lock via reverse gear and manual activation -235/75 R 17.5 3PMSF tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) Steel construction: -steel construction made from high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Accessories: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -2 pieces of restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized extensions, extendable by approx. 230 mm on each side -One bracket for a rotating beacon at the rear of the trailer -Galvanized supports under the bevel of the loading area -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -3 pairs of WADER container pockets in the loading area for a 20ft (30ft) or a 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Sliding suspension rails for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the sloping loading area -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -One bracket for rotating beacon on the warning signs -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)