Swap body with box structure

Krone BDF-System 7.450 mm lang, Lack NEU in Premium Plus

Condition: refurbished (used), functionality: fully functional, color: white, 7.82 m BDF Krone Smooth-Sided Swap Body, used (multiple units available) Color: White Drop-off height: 1120 mm The swap body is watertight and the roller shutter door operates smoothly. Approximate external dimensions (mm): Length 7820 x Width 2550 x Height 2925 Approximate internal dimensions (mm): Length 7700 x Width 2480 x Height 2700 Door opening (mm): Width 2370 x Height 2530 Lashing: Keyhole type Permissible total weight for approval/operation: 16,000 kg Intermodal ready, incl. rail coding to DIN EN 13044 Rail approval Code XL (for rail transport at speeds over 120 km/h) Floor frame: 195 mm high floor module incl. floor panel; rectangular tube longitudinal beams with cross members and outer frame as welded construction with underfloor guide tunnel 4 container corner castings on 20' basis, symmetrical overhangs, 4 grab bar profiles 7 pairs of lashing rings at the sides in the rubbing strip Floor: Type: BO WST 27 mm thick, waterproof bonded phenolic resin-coated plywood floor, strength as per DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg 2 ventilation openings at the front in the floor (as per GGVS) Box body: Superstructure type: AB WST Internal height: 2700 mm Portal height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Smooth side walls made of galvanized steel sheet panels Roof made of trapezoidal profiled steel sheets, panel height: 25 mm Prodpfx Aevxbfmjdhob 2 ventilation grills per side wall Rubbing rail and side wall with recesses; internal forklift impact protection, 3-sided, approx. 300 mm high Front wall smooth, made of galvanized steel sheet panels Interior front wall with 21 mm phenolic resin-coated plywood, 750 mm high, above that continuous 12 mm plywood Exterior front wall upper section offset (optimized for cornering) Rear wall with roller shutter door (net width: 2370 mm), with DB Train Plus approval, replaceable rollers Flat steel impact protection for roller shutter guide rails Side walls internally fully covered with keyhole plates 13 steel guide rails recessed left and right for double-deck load bars 13 LM load beams for double-deck loading Horizontal steel impact protection on rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

Condition: refurbished (used), functionality: fully functional, empty load weight: 3,400 kg, 7.82 BDF Krone smooth wall swap body, used (several available) The swap body including the roof is painted on the outside in the customer's color. Common RAL color The substructure and parts of the support feet are not painted, this is not visible after it has been placed on the ground. Parking height 1320 mm The swap body is waterproof and the roller shutter is open. External dimensions in mm approx: Length 7820 Width 2550 Height 2750 Internal dimensions in mm approx: Length 7650 Width 2480 Height 2500 Door openings in mm: Width 2370 Height 2600 Psdpovn Scnefx Adhjrb Lashing: Keyhole Weight: Tare 3000 kg Max load: 13000 kg Max gross: 16000 kg Please note: Actual dimensions and other specific details may differ slightly from the above information due to continual product improvement.

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 06/2018, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2018, WhatsApp WECON Curtainsider SLIDING TARPAULIN PLATEAU BDF Swap Body Duke Type WPR 715 SG Year of manufacture 06/2018 First German owner! 4 WPR 715 SG trailers with the following equipment: WECON standard swap body with sliding curtains, Duke, type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Terrain weight: 2,590 kg GVWR: 16,000 kg Interior height 2,200 mm with sliding roof included Exterior height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Forklift pockets on the rear of the floor frame Reinforced zinc tubes for carrying a truck-mounted forklift. Chain lock bracket required on the body. --> Centering tunnel restricted due to reinforced design Suitable for continuous use! Floor frame: Made of high-quality galvanized steel, overall height 215 mm, 4-way container corner fittings on a 20' base, 4 gripping edges according to EN 284, wheel clearance 120 mm Floor covering for swap bodies: Multi-layered laminated wood floor, approximately 25 mm thick, forklift accessible, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1,320 mm, galvanized version 15 pairs of lashing rings. Layout: From the front of the trailer to the middle of the first pair of lashing rings, approximately 400 mm long. Then distribute the remaining lashing rings evenly. Lashing rings, 1 pair, mounted on the inside of the front wall stanchion, 1000 mm high from the top edge of the floor. Pallet stop edge 30 mm high on one side, on the left side in the direction of travel, normal tarpaulin side. Lashing options via slotted holes (approx. 15 x 30 mm). Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full-height cassette construction (cassettes galvanized). Screen-printed panel on the inside of the front wall, 1500 mm high, 12 mm thick. Inner front wall with impact protection consisting of 300 mm high, galvanized sheet steel. Predsv Rtx Aepfx Adhob Smooth double-leaf portal door, sandwich construction, 4 internal espagnolette locks, 4 hinges per door leaf. Left side wall: sliding tarpaulin in accordance with DIN EN 12641-2: 890 g/m² quality, 500 x 600 mm webbing pattern, tear strength: vertical 24 kN, horizontal 13 kN. Stainless steel belt buckle with pressure release. 1 center stanchion, symmetrically arranged --> Left-hand direction of travel Stanches each with 3 rows of slatted pockets included and one row of collecting pockets (approx. 600 mm high) on the floor 8 aluminum insert slats, left-hand direction of travel, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side tarpaulin and guided in the upper and lower guide rails via rollers. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insert slats are omitted Fixed tarpaulin roof: sliding roof, standard only with locking mechanism. Roof with adjacent guide rails, width between guide rails approx. 2,370 mm, distance between lower edge of guide rail and lower edge of bow approx. 90 mm Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL colors, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Certificate Code XL included This certificate confirms the load securing

Condition: good (used), functionality: fully functional, Year of construction: 2016, color: grey, overall weight: 18,000 kg, maximum load weight: 15,400 kg, empty load weight: 2,600 kg, loading space volume: 49 m³, loading space width: 2,450 mm, loading space length: 7,150 mm, loading space height: 2,700 mm, Formerly a driving school trailer Podpsz A Dp Nsfx Adherb BDF turntable, 2-axle trailer BDF platform with sliding tarpaulin, 7.15 m Delivery possible

Condition: used, mileage: 1,001 km, first registration: 01/2006, empty load weight: 2,780 kg, maximum load weight: 13,220 kg, overall weight: 16,000 kg, color: white, driver cabin: other, gearing type: other, loading space length: 7,320 mm, loading space width: 2,420 mm, loading space height: 2,270 mm, Year of construction: 2006, Vehicle location: Bovenden, doors Body: Swap body with wing doors ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Prjdpfx Adsu T Ihxjheb - .

Condition: used, maximum load weight: 15,460 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2017, loading space length: 7,330 mm, loading space width: 2,460 mm, loading space height: 2,540 mm, Year of construction: 2017, Equipment: ABS, * Kögel AW 18 * Flatbed with tarpaulin * BDF system * Swap body * Kögel bodywork * Year of manufacture: 2010 * SAF axles * Disc brakes * Air suspension * Tires: see pictures * Permissible total weight: 18,000 kg * Unladen weight: 2,540 kg * Payload: 15,460 kg * Immediately available * Subject to errors and prior sale Do you have any questions? Contact us for a quick consultation—feel free to reach out directly via WhatsApp: We offer: Net purchase for companies within the EU with a valid VAT ID number, as well as for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. Prodpfjyv Ugwsx Adheb All prices in classified ads are gross prices and already include the statutory VAT of 19%.

Condition: used, overall weight: 16,000 kg, first registration: 10/2017, Year of construction: 2017, GERMAN Visit our website, where you can find our complete vehicle inventory with many more photos and information in several languages. SEL 6998 Krone WK 7.3 RSTG Textile Year of manufacture: 10.2017 Permitted total weight (kg): 16,000 Empty weight (kg): 3,080 VIN: W0777451 BODY Internal dimensions: Height (m): 2.72 (2.64) Width (m): 2.48 Length (m): 7.38 OTHER SPECIFICATIONS: Portal doors Textile M. BUFANO m. (Italian, English, German) Prodouf Iw Djpfx Adheb J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC d. (German, Bosnian) L. OBODYNSKA Ukrainian/?????, Russian/??-?????) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH Although every effort has been made to ensure the accuracy of the information, we cannot guarantee the absence of errors or omissions. We ask our customers to consult the available photos. The dimensions given are approximate values. Our vehicles are sold in the ACTUAL condition they are in. We invite customers to visit our company to personally inspect the condition of the vehicle. In addition, we offer the possibility of a test drive. It is important to note that the batteries delivered with the vehicle are those that are currently installed. If the customer wishes for new batteries, we are available for pricing information.