Telescopic handler

Manitou ROTO MRT 2150+ PRIVILEGE 21m/5t.*FUNK* *

Condition: ready for operation (used), functionality: fully functional, power: 323.62 kW (440.00 HP), first registration: 05/2009, fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, Year of construction: 2009, MAN TGS 41.440, year 2009, 468329 km, EURO5, automatic transmission, with CIFA RY1300 concrete mixer on PTO. Iedpexgg Raofx Aa Hsia

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2024, Equipment: air conditioning, MAN 35.510 TGS 8x4 SWAN S 47-5 GERMAN DOCUMENTS CoC available! CONCRETE PUMP Without registration / NEW (only delivery mileage) * Production date: 2024 * Manual transmission Iiedpfx Aajxw Apgo Hja * Aluminum rims Inspection possible at any time during our business hours, test drives by appointment! For export sales, a deposit will be held, which will be refunded upon receipt of the certificate of arrival. Company logos or advertising decals on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the additional features. All information provided without guarantee – subject to errors, changes, typos, and prior sale. Vehicle descriptions do not constitute guaranteed qualities. Please refer to our Terms and Conditions and take note of them.

Condition: used, Year of construction: 2010, color: white, machine/vehicle number: 013, Equipment: air conditioning, cooling unit, Dear Sir or Madam Thank you for your interest in refrigerated containers from MT CONTAINER GmbH in Hamburg. Refrigerated containers are used for the gentle transportation or storage of foodstuffs and other goods that require a certain temperature to be maintained to ensure their integrity. Whether against the effects of the weather or theft, your goods remain protected in any case. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm _____ This container is a: 40 foot HC refrigerated container from Thermo King (year of manufacture: 2010). _____ Our refrigerated containers have the following features: ✅ PTI-OK ✅ Valid CSC sticker (TÜV for the box) ✅ Adjustable from -30⁰C to +30⁰C ✅ Wind and waterproof ✅ Odourless The insulation is on average 8cm - 10cm (depending on manufacturer) _____ Our refrigerated containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Internal dimensions ■ L 12032 mm x W 2294 mm x H 2554 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 67.9 m³ Euro pallets ■ 25 Further details: Unladen weight ■ 4550 kg Payload ■ 29450 kg Total weight ■ 34000 kg Goods to be transported: Temperature-controlled goods _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ PVC slat curtain on request Iiodpfx Aaeh Hnbws Hoa ■ Access ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send a non-binding message by [e-mail], [telephone], [fax], [letter] to the contact details given under "Legal information".

Condition: good (used), functionality: fully functional, mileage: 496,003 km, power: 308.91 kW (420.00 HP), first registration: 01/2008, fuel type: diesel, axle configuration: 8x4, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2008, SCANIA R420 CB8X4 year 2008, km 496003, EURO4, with ARMEC HY120 concrete mixer auxiliary engine Isdev Ayilspfx Aa Heia

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third Iisdok Af Svopfx Aa Hoa -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation Iijdpfx Aaergzv Nj Hsa * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, mileage: 285,000 km, power: 210 kW (285.52 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2017, next inspection (TÜV): 08/2026, emission class: euro5, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, immobilizer system, navigation system, soot filter, Toyota Land Cruiser V8 4D * Top condition * Very well maintained * Automobile * Off-road vehicle * SUV * Fully equipped * Air suspension * Trailer coupling * 2nd hand * EZ: 18.10.2017 * HU: 08/2026 * Unladen weight: 2585 kg Iedpevh Ev Usfx Aa Hjia * Total weight: 3350 kg * Dimensions: 4975 mm x 1980 mm x 1935 mm * Mileage: 255000 km * Power: 183 kW/ 248 PS * Transmission: Automatic * Displacement: 4461 cm³ * Diesel * 8 cylinders * All-wheel drive * Power steering * 5 seats * Color : black * Interior : Full leather brown * Tire dimension: 285/50 R 20 112V * Darkened windshield * Amient lighting * Heated windshield * Electric seat adjustment, power windows, tailgate, side mirrors * Panoramic roof * Sunroof * Keyless central locking * Multifunction leather steering wheel * Heated steering wheel * Heated front & rear seats * Seat ventilation front & rear * On-board computer * Head-up display * JBL sound system * Touchscreen * Bluetooth * Hands-free system * Navigation system * USB * Tuner/radio * Front & rear camera * All-weather tires * Light alloy wheels * Roof rails * Alarm system * ABS * Distance warning system * Towing assistant * Electric immobilizer * High beam assistant * Luggage compartment cover * Speed limiter * Isofix * Front fog lights * Emergency brake assist * Emergency call system * Rain sensor * Tire pressure monitoring * Track Assist * Automatic start/stop * Traffic sign recognition * Front, side and other airbags * Bi-xenon headlights ATTENTION !!!!! BE SURE TO READ !!!!! We expressly reserve the right to prior sale, as we also recommend this item on other portals urgently a viewing and inspection, so that no misconceptions arise about the condition and suitability of the buyer. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The interior dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! TRADE-INS AND TRADE-UPS POSSIBLE !!! Showroom: 58285 Gevelsberg , Am Sinnerhoop 17 Opening hours: Monday ? Friday 8.30 to 17.00 o'clock, Saturday 8.30 to 14.00 o'clock Always over 500 new and used trailers in stock !!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, power: 74.5 kW (101.29 HP), color: red, Year of construction: 2015, operating hours: 2,181 h, Equipment: all wheel drive, cabin, Off-road - MANITOU telescopic arm forklift, type: MT 932 ST3B - 4x4x4, first use: 2016, LIFTING FORCE: 3,200 kg, LIFTING HEIGHT: 9.00 m, LONG LOADING FORKS (Fork length: 1.180 mm / pick-up width: 1,080 mm) - LOAD PROTECTION GRID, ADDITIONAL HYDRAULIC, QUICK CHANGER, 4-cylinder DEUTZ turbo diesel engine (TCD 3.6 L4 - 101.18 hp / 74.40 kW at 2.200 rpm), ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVE, OVERLOAD WARNING DEVICE, large cab (low overall height, only approx. 2.300 mm) - colored glass, KAB - comfort seat, ROPS / FOPS, trailer coupling, traffic lighting, CPB, WARNING LIGHT / WARNING SOUND, exterior mirrors (3x), windscreen wipers (4x), heating / ventilation, retaining and transport eyes, OPERATING INSTRUCTIONS (in German). Tires: BKT OFF-ROAD TIRES (15.5 / 80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 5,850 mm (approx. 4,600 mm without forks), width: approx. 2,380 mm, height: approx. 2,300 mm. ∗∗∗ FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET PRICE IS PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 932 ST3B - 4x4x4, first use: 2016, LIFTING FORCE: 3.200 kg, LIFTING HEIGHT: 9.00 m, LONG FORKS (fork length: 1.180 mm / width admission: 1.080 mm) - PROTECTION LOAD GUARD, ADDITIONAL HYDRAULIC, QUICK CHANGER, 4-cylinder DEUTZ diesel-engine (type: TCD 3.6 L4 - 101.18 PS / 74.40 kW at 2.200 rpm), 4-WHEEL-DRIVE (4WD) and ALL-WHEEL-STEERING SYSTEM (4x4x4) - CRAB STEERING (dogway), OVERLOAD PROTECTION SYSTEM, big driverhouse (low height, only approx. 2.300 mm) - colorglass, KAB - comfortseat, ROPS / FOPS, follower coupling, road lightnings, CPB, WARNING LIGHT / WARNING RING, back view mirror (3x), windshield wiper (4x), heating / ventilation, hold- and transporthooks, OPERATION MANUAL (in german). Tyres: BKT ROUGH TERRAIN TYRES (15.5 / 80 - 24) - all around approx. 98 %. Transport dimensions: see above. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) ∗∗∗∗ © pb Isdpfxevf E Npj Aa Hsia

Condition: used, Year of construction: 2000, operating hours: 3,096 h, load capacity: 3,200 kg, lifting height: 12,000 mm, fuel type: diesel, construction height: 2,570 mm, power: 54.5 kW (74.10 HP), tire condition: 98 %, Equipment: all wheel drive, cabin, pallet forks, Off-road telescopic arm forklift JCB, type: 532 - 120 4x4x4, first use: 2001, LIFTING FORCE: 3,200 kg, LIFTING HEIGHT: 12.00 m, 4-cylinder PERKINS diesel engine (type: 1906/2200 - 74.12 HP / 54.50 kW at 2,200 rpm), ADDITIONAL HYDRAULICS, LONG LOADING FORKS (fork length: 1,200 mm / pick-up width: 1.400 mm), QUICK CHANGER, ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVE, hydraulic outriggers (2x), OVERLOAD WARNING DEVICE, ROPS / FOPS, large cab (colored glass), CPB, FRONT DISK PROTECTION GRILL, traffic lights, comfort seat, windshield wipers (2x), exterior mirrors (2x), WARNING LIGHT / WARNING SOUND, heating / ventilation, trailer coupling, retaining and transport eyes. Tires: BKT OFF-ROAD TIRES (15.5 / 80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 6,920 mm (approx. 5,900 mm without forks), width: approx. 2,330 mm, height: 2,570 mm. Price is net export, plus VAT in Germany. FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET PRICE IS PAID (!) © pb - - - - - - - - - - - - - - - - - - Rough terrain telescopic forklift JCB, type: 532 - 120 4x4x4, first use: 2001, LIFTING FORCE: 3.200 kg, LIFTING HEIGHT: 12.00 m, 4-cylinder PERKINS-diesel engine (type: 1906/2200 - 74.12 PS / 54.50 kW at 2.200 rpm), ADDITIONAL HYDRAULIC, LONG FORKS (fork length: 1.200 mm / width admission: 1.400 mm), QUICK CHANGER, 4-WHEEL-DRIVE-SYSTEM and ALL-WHEEL-STEERING (4x4x4) - CRAB STEERING (dogway), hydraulic supports (2x), OVERLOAD-PROTECTION-SYSTEM, ROPS / FOPS, big driverhouse (colorglass), CPB, WINDSHIELD PROTECTION GUARD, road lightings, comfortseat, windshield wiper (2x), back view mirror (2x), WARNING RING / WARNING LIGHT, heating / ventilation, follower coupling, hold- and transporthooks. Tyres: BKT OFF-ROAD TYRES (15.5 / 80 - 24) - all around approx. 98 %. Transport dimensions: see above. Price is net. EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) Iijdpfx Ajvbflvea Hja

Condition: used, power: 70 kW (95.17 HP), fuel type: diesel, color: red, lifting height: 9,000 mm, tire size: 15.5 / 80 - 24, tire condition: 98 %, mast type: telescopic, Year of construction: 2009, operating hours: 2,362 h, load capacity: 3,200 kg, Equipment: all wheel drive, cabin, hydraulics, pallet forks, Off-road - MANITOU telescopic arm forklift, type: MT 932 D-E3 - 4x4x4, first use: 2010, LIFTING FORCE: 3,200 kg, LIFTING HEIGHT: 9.00 m, LONG LOADING FORKS (fork length: 1.180 mm / pick-up width: 1,120 mm) - LOAD PROTECTION GRID, ADDITIONAL HYDRAULIC, QUICK CHANGER, 4-cylinder PERKINS TURBO diesel engine (type: 2978/2200 - 95.20 hp / 70.00 kW at 2.200 rpm), ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVING, OVERLOAD WARNING DEVICE, large cab (low overall height, only approx. 2,280 mm) - colored glass, comfort seat, ROPS / FOPS, trailer coupling (with power connection), traffic lights, CPB, WARNING LIGHTS, exterior mirrors (2x), windscreen wipers (2x), heating / ventilation, retaining and transport eyes, OPERATING INSTRUCTIONS (in German). Tires: All-terrain tires (15.5 / 80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 5,850 mm (approx. 4,600 mm without forks), width: approx. 2,280 mm, height: approx. 2,280 mm. Price is net export, plus VAT in Germany. ∗∗∗ FINANCING POSSIBLE / TRANSPORT AFFORDABLE (WORLDWIDE) / ON EXPORT ONLY THE NET PRICE IS TO BE PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 932 D-E3 - 4x4x4, first use: 2010, LIFTING FORCE: 3.200 kg, LIFTING HEIGHT: 9.00 m, LONG FORKS (forklength: 1.180 mm / width admission: 1.120 mm) - PROTECTION LOAD GUARD, ADDITIONAL HYDRAULIC, QUICK CHANGER, 4-cylinder PERKINS TURBO diesel-engine (type: 2978/2200 - 95.20 PS / 70.00 kW at 2.200 rpm), 4-WHEEL-DRIVE (4WD) and ALL-WHEEL-STEERING SYSTEM (4x4x4) - CRAB STEERING (dogway), OVERLOAD PROTECTION SYSTEM, big driverhouse (low height, only approx. 2.280 mm) - colorglass, comfortseat, ROPS / FOPS, follower coupling (with power connection), road lightnings, CPB, WARNING LIGHT, back view mirror (2x), windshield wiper (2x), heating / ventilation, hold- and transporthooks, OPERATION MANUAL (in german). Tyres: ROUGH TERRAIN TYRES (15.5 / 80 - 24) - all around approx. 98 %. Transport dimensions: see above. Price is net. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) ∗∗∗∗ © pb Isdsuq Hypopfx Aa Hsia