Mobile crane

Liebherr LTM 1095 5.1 KRAAN/KRAN/CRANE/GRUA

Condition: used, mileage: 159,620 km, Year of construction: 2006, operating hours: 28,594 h, Drive: Wheel drive Unladen weight: 36,000 kg Dedpfx Aksylgxpo Tjwb Lifting capacity: 45,000 kg Dimensions of the cargo area: 1150 x 270 x 390 cm Serial number: 53304 Condition of front tires: 70 Condition of rear tires: 70 Please contact PFEIFER GROUP for further information.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) Dedpfxorgzv Nj Ak Towb * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high Dedpek Af Svofx Ak Tjwb -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, mileage: 240,000 km, power: 175 kW (237.93 HP), first registration: 05/2008, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2023, color: orange, gearing type: mechanical, emission class: euro4, Year of construction: 2008, Equipment: ABS, air conditioning, all wheel drive, parking heater, Welcome to Johanning's Commercial Vehicles, your specialist for nearly new and exclusive used vehicles. Dedpfx Aevm Saqok Tewb AVAILABLE IMMEDIATELY! Delivery available. Financing available. Location: 39606 Osterburg - Unimog U400 - 240,000 km - Three-way tipper - Front PTO - Hydraulic system: 4x double-acting circuits front and rear - Steering wheel can be shifted to the right side - Hydrostatic drive possible up to 20 km/h - MULAG verge mower arm - MULAG verge mower arm (duplicate in original) Additional equipment: - Salt spreader - Snow plough - MULAG verge mower arm Air conditioning: air conditioning system * Auxiliary/parking air conditioning Hydraulics: tipping hydraulics Safety: ABS * All-wheel drive For more pictures or videos, please inquire. Johanning's Commercial Vehicles, your partner for exclusive and nearly-new used vehicles. Our services – your advantages (Post-sale) – Trade-in of your vehicle possible (any condition) – Immediate deregistration of your vehicle free of charge – Registration service for €150 (including fees and plates) – Short-term plates – Viewing and test drives possible at any time by prior telephone appointment – Delivery to your door available by arrangement Errors and prior sale excepted.

Condition: good (used), functionality: fully functional, mileage: 175,650 km, power: 205 kW (278.72 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 29,000 kg, tire size: 445/95 R25, axle configuration: 4x4, number of seats: 2, first registration: 05/2006, emission class: euro3, brakes: telma, suspension: hydraulics, Year of construction: 2006, operating hours: 12,347 h, machine/vehicle number: W092725006EL05016, Equipment: ABS, all wheel drive, cabin, crane, differential lock, onboard computer, parking heater, retarder, LOCATION: D - 73230 Kirchheim unter Teck - Liebherr LTM 1040-2.1 | Factory No. 051 515 - Lifting Capacity: 40 t / 2.50 m / 75% - Year of Manufacture: 2006 - Telescopic Boom: 10.5 - 35 m - Counterweight: 1.5 t / 5 t (6.5 t total) - Hook Blocks: 3-sheave, 22.4 t (DH), 1-sheave, 10 t - Carrier Engine: Mercedes OM 906 LA – Operating Hours: 23,632 h / 205 kW / 278 HP - Operating Hours Undercarriage (Engine): 9,560 h - Operating Hours Superstructure (Crane Operation): 14,072 h - Transmission: ZF torque converter transmission - Auxiliary Brake: Telma retarder - Drive/Steering: 4 x 4 x 4 Dwodpfex H Svdex Ak Tsb - Tyres: 16.00 R25 (445/95 R25) Bridgestone - Mileage: 175,650 km - Safety System: LICCON 1 Other features: Additional heater in crane cab, 12 V sockets in driver’s cab and crane cab, work lights (Xenon) on slewing platform, aircraft warning light, reversing alarm. Good condition for its age, immediately operational – further details on request – available at short notice.

Condition: used, mileage: 278,066 km, Year of construction: 2009, Drive: wheel Dsdpfx Akew D N Rao Tjwb Unladen weight: 72,000 kg Lifting capacity: 150,000 kg Cargo space dimensions: 1620 x 285 x 395 cm Serial number: 068506 Front tire condition: 80 Rear tire condition: 80 Please contact PFEIFER GROUP for further information.

Condition: excellent (used), functionality: fully functional, mileage: 43,028 km, power: 236 kW (320.87 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 36,000 kg, empty load weight: 36,000 kg, tire size: 445/95 R25, axle configuration: 6x6, number of seats: 1, first registration: 06/2020, DGUV certified until: 06/2025, next inspection (TÜV): 06/2026, emission class: euro5, mast type: telescopic, brakes: telma, suspension: hydraulics, Year of construction: 2020, operating hours: 2,998 h, machine/vehicle number: WLFC30CZ1LEZZ0009, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, differential lock, onboard computer, parking heater, retarder, soot filter, LOCATION: D-73230 KIRCHHEIM UNTER TECK . Liebherr LTC 1050-3.1 - Serial No. 056 808 Lifting capacity: 50 t / 2.5 m (75%) . Telescopic boom: 8.2 - 36 m (Telematik) Swing-away jib: 7.5 m Assembly jib: 1.5 m (incl. hook traverse and roller set) Number of winches: 1 Counterweight: 4.8 t / 1.7 t (6.5 t total) Dwedpextu Nqefx Ak Teb Hook blocks: 3-sheave 32 t double hook, lifting hook 4.8 t Outrigger system: VarioBase (variable outrigger base) Engine: Cummins 6-cylinder / 236 kW / 320 HP / Emission standard Stage V and TIER 4 according to EPA Transmission: ZF-TraXon Auxiliary brake: Telma Drive/steering: 6 x 6 x 6 Tyres: 16.00 R25 (445/95 R25) Bridgestone Lower chassis operating hours: 1,485 h Upper structure operating hours: 2,998 h Mileage: 43,028 km Safety system: LICCON 2 . OTHER EQUIPMENT - Air conditioning and auxiliary heater - Upper structure lighting package: 2 x work lights (Xenon) on boom head and 3 x floodlights on superstructure - Height-adjustable crane cabin - Winch monitoring and rear-view camera - 12 V socket in the cab - Working range limiter - Emergency operation for crane hydraulics . Very good condition – German machine from first owner – further details on request – immediately available from stock Kirchheim unter Teck.

Condition: used, mileage: 41,260 km, power: 230 kW (312.71 HP), first registration: 03/1995, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: crane, Vehicle identification number: W09363000SEL05061 Crane serial number: 19211 German machine - MOT due ----Crane chassis data: Operating kilometers: 41,260 km - approx. 14,703 h Number of axles: 3 Driven / steered: 6x6x6 Central lubrication system Tires: 445/95 R 25 Dwodpew Ii Ewefx Ak Tob ----Crane upper carriage data: Heated cabin Telescopic boom / boom: 30 m / 3 Maximum load capacity: 40 tons Counterweights: 7.1 tons Hook block Central lubrication system Operating hours: 11,596 hours Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,000 kg, permissible axle load (axle 2): 11,000 kg, permissible axle load (axle 3): 11,000 kg, loading space length: 15,500 mm, loading space width: 2,740 mm, loading space height: 1,050 mm, total length: 15,500 mm, total width: 2,740 mm, suspension: hydraulics, tire size: 245/ 70R17.5 | load index 146/146F, color: blue, Year of construction: 2003, Color: Blue Load capacity: 73,500 kg Extendable Main Features Manufacturer: Nooteboom Type: MCO-85-06 V/Z – Double Extendable Chassis number: XMRMC000030000456 Year: 2003 Weights/Loading Capacity King-pin load: 27,500 kg Axle load: 11,000 kg Total axle load: 66,000 kg GVW: 93,500 kg Empty weight: 20,200 kg Loading capacity: 73,500 kg Axles Brand axles: SAF Hydraulic suspension First axle rigid Axles 2 – 6 hydraulic steering High low valve WABCO braking system with EBS Tires: 245 / 70 R17.5 | load index 146/146F Dimensions Length: 15,505 mm Extensions: +8,800 mm + 8,800 mm Max extended length: 31,105 mm Loading floor length: 11,520 mm Maximum loading floor length: 29,120 mm Loading floor width: 2,740 mm Height: 1,050 mm Additional Information NATO plug Hydraulic operated Gooseneck Outriggers Double extendable Lashing rings Manual landing gear Electro hydraulic pump for trailer functions Rear bumper with lights King-pin 3.5” Central greasing with 2 pumps = Further Information = General Information Year of construction: 2003 Axle Configuration Tire size: 245/70R17.5 | load index 146/146F Axle brand: SAF Suspension: hydraulic suspension Rear axle 1: Twin tires; Max. axle load: 11,000 kg Rear axle 2: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 3: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 6: Twin tires; Max. axle load: 11,000 kg; Steerable Weights Empty weight: 20,200 kg Payload: 73,299 kg GVW: 93,500 kg Functional Dwodpfx Akov E Rchs Teb Loading floor height: 105 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: Upon request

Condition: used, mileage: 485,000 km, power: 309 kW (420.12 HP), first registration: 05/2005, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, emission class: euro4, loading space length: 4,300 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, parking heater, tail-lift, Scania R 420 8x4, interchangeable platform body, 80t Fassi crane, remote control, with fifth wheel coupling Internal number for inquiries: 0824570 * Condition: very good * Engine: 309 kW / 420 hp * Displacement: 11,705 cm3 * Unladen weight: 21,100 kg * ABS * EBS * Differential lock, rear axle * Auxiliary drive * Hydraulics * Suspension: Air / leaf spring, automatic climate control * Roof hatch, mechanical * Sun visor with additional spotlights * Fog lights * Air horn on the roof * Air-suspended comfort seat, driver * Armrest, driver * Auxiliary heater * 24/12V connection * Electric windows, driver / passenger * Electrically heated and adjustable mirrors * CD radio / USB / AUX * Reversing mirror, right side * Steerable axle * Storage box, left side / aluminum * Wheel formula 8x4 Body: Platto Dimensions of the loading area: L: 4,300 mm, W: 2,480 mm Crane: Fassi, up to max. 80.00 t * up to 16.15 m, + fly jib up to 23.55 m Tires: 1st axle: 385 / 55 R22.5, air-suspended, 40% 2nd axle: 385 / 55 R22.5, air-suspended, 40%, steerable axle 3rd axle: 315 / 70 R22.5, air-suspended, 35% 4th axle: 315 / 70 R22.5, air-suspended, 35% ----Price: 125,900.00 Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: Dwjdpfx Akeyfkf Te Tsb We speak: German, English, French, Polish, and…? Typographical errors, errors and prior sale are subject to change.