Tipper truck

SCANIA R 580,8X4,KIPPER,BORDMATIC,PALFINGER PK 19.001

Condition: used, mileage: 303,127 km, power: 427 kW (580.56 HP), fuel type: diesel, color: red, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,100 mm, loading space height: 890 mm, first registration: 05/2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Scania R580 V8 Operation 5/2019 Mileage 303,127 km 8x4 4th axle lifting + steering axle Euro 6 Automatic transmission - fully automatic + clutch!!!! Retarder 1 loading area Tank 350l ABS Air conditioning Cruise control Refrigerator Auxiliary heating Differential lock ALU rims Towing hitch 50 mm Complete air suspension Front axle air suspension Schwarmüller S2 tipper body Bordmatic Loading area 6100x2480x890 mm Fpjdpfxjvm I D Eo Aaxjp Hydraulic crane Palfinger PK19.001 SLD 5 Remote control Reach 10,2m=1600 kg First owner Scania service only Service booklet TOP CONDITION - LIKE NEW

Condition: new, empty load weight: 30,000 kg, maximum load weight: 9,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 r 17,5, Year of construction: 2023, Equipment: ABS, NEW, Bpw drum brakes, 1st axle liftable, 3rd axle steerable, 40 mm hardwood coated gooseneck bed, various anchor rings, side wideners with tables x exceptional load, toolbox, hydraulic double ramps, hydraulically shrinkable and widenable, neck rails, 5,600 kg electric winch. Fpsdog Dnc Aspfx Aaxsp

Condition: used, mileage: 303,127 km, power: 427 kW (580.56 HP), first registration: 05/2019, fuel type: diesel, color: red, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 6,100 mm, loading space height: 890 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Scania R580 V8 Operation 5/2019 Mileage 303,127 km 8x4 4th axle lifting + steering axle Euro 6 Automatic transmission - fully automatic + clutch!!!! Retarder 1 loading area Tank 350l ABS Air conditioning Cruise control Refrigerator Auxiliary heating Differential lock ALU rims Towing hitch 50 mm Complete air suspension Front axle air suspension Schwarmüller S2 tipper body Bordmatic Loading area 6100x2480x890 mm Hydraulic crane Palfinger PK19.001 SLD 5 Remote control Reach 10,2m=1600 kg First owner Scania service only Service booklet TOP CONDITION - LIKE NEW Fjdpfxsut Aqve Aaxspp

Condition: excellent (used), functionality: fully functional, mileage: 131,000 km, power: 323 kW (439.16 HP), overall weight: 27,000 kg, fuel type: diesel, color: red, axle configuration: 6x2, maximum load weight: 10,185 kg, empty load weight: 15,740 kg, fuel: diesel, suspension: steel-air, loading space width: 2,550 mm, loading space length: 6,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, low noise, navigation system, onboard computer, retarder, IMMEDIATELY AVAILABLE!!! TOP CONDITION!!! RENAULT D WIDE 6x2 Euro 6 with steering and lifting axle Fjdewgbrbjpfx Aaxepp Palfinger PK 27002 SH loading crane with JIP rotator and hydraulic grab, also on the JIP, and radio remote control crane

Condition: excellent (used), mileage: 804,546 km, fuel type: diesel, color: green, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, cruise control, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Electric windows - Electrically adjustable exterior mirrors - Low noise - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Fog lights - Sun visor - Stability control - Stationary air conditioning - Toolbox - Power Take-Off (PTO) - Tow hitch = Further Information = Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Dual tires Rear axle 2: Dual tires Weights Unladen weight: 23,200 kg Functionality Mast: Telescopic (6 sections) Mast length: 20 m Lifting capacity: 20,000 kg Lifting height: 2,000 cm Crane: PALFINGER PK 65002-SH E POWER LINK PLUS, mounted behind the cab Superstructure brand: PALFINGER PK 65002-SH E POWER LINK PLUS CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request DAF XF 105.510 8X4 WITH PALFINGER PK 65002-SH E POWER LINK PLUS CRANE EURO 5 L PACKAGE 510 HP DRIVE 8X4 AIR SUSPENSION WHEELBASE 570 CM XF CAB WITH AIR CONDITIONING, PARK COOLING, AND REFRIGERATOR AUTOMATIC TRANSMISSION TRAILER COUPLING TOOLBOXES OPEN LOAD PLATFORM LOAD PLATFORM LENGTH 620 CM TIE-DOWN HOOKS TWISTLOCKS PALFINGER PK 65002-SH E POWER LINK PLUS CRANE TOTAL 6X HYDRAULIC EXTENSIONS OIL COOLER FOR CRANE HYDRAULICS 4X OUTRIGGERS RADIO REMOTE CONTROL MAX WORKING HEIGHT 2000 CM MAX LIFTING CAPACITY 20,000 KG MAX LIFTING CAPACITY AT 1550 CM 3100 KG FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE. WE SPEAK GERMAN Fpedpfx Aouxxuceaxop WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with bevelled corners at the front 45° and with a rear bevel of approx. 750 mm x 10° •3 pairs of lashing rings •Hardwood flooring 30 mm thick Loading area in extendable version: •Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° •Cutouts in the outer frame of the loading area for hanging tensioning straps •Hardwood flooring approx. 48 mm thick, checkered sheet covering over the axles Two-part steel ramps: •One pair of galvanised, two-part steel ramps with approx. 48 mm thick hardwood flooring •Ramp with hydraulically foldable and unfoldable ramp parts, hydraulic lifting mechanism and hydraulically movable •Maximum load per pair: approx. 40,000 kg Axles and Tires: •BPW axles and suspension, 2 axles rigid, 1 axle with self-steering •Technical axle load: 12,000 kg •Electro-magnetic reversing lock can be activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Brake system: •WABCO brake system in accordance with EU regulations with EBS-E Paintwork: •First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer •A high-quality 2-component top coat in one color in MB 7350 Nova gray •Rear section metallized and painted in RAL 9010 Seatposts: •JOST seatposts with 2-speed gearbox for 24t lifting load (50t test load). Steel construction: •Steel construction made of high-strength fine-grain steel •Steel qualities: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system in accordance with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Accessories included: •A spare wheel with holder •A galvanized steel bulkhead approx. 400 mm high •Yellow-red air couplings on the galvanized front connection panel •4 wheel chocks •A bracket for a rotating beacon at the rear of the trailer •Mounting in the rear area of the gooseneck for aluminum docking ramps •Galvanized folding supports under the bevel of the loading area Fpodpfxehlz S Nj Aaxep •Cover plates to bridge the space between the ramps and the loading area •White Reflective tape in accordance with EU regulations on the side, on the extension and at the rear, red •Electro-hydraulic unit at the rear, under the loading area •A holder for the warning signs including a socket on the gooseneck and on the ramps on the left and right •Control valves for the ramps attached to the right-hand side of the trailer •ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm •The rear, galvanized plug-in stanchions are removable (length of the structure approx. 2,560 mm) •Four warning signs extendable by approx. 400 mm with a position light •3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container •6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading area •Galvanized extensions, extendable by approx. 230 mm each Page •Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area bevel •A painted layer of sand on the checker plates, above the kingpin and the loading area as anti-slip protection •Load pressure gauge for determining the axle loads including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -telescopic loading area with rear slope approx. 1,000 mm x 8° -1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widenings in the lower area -A pair of fixed wheel recesses between the 1st and 2nd axles, approx. 1,610 x 970 x 400 mm -3-piece removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 to / pc. -Recess in the chamfer and protruding into the loading area to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) -5 pairs of lashing rings foldable outwards (LC 5,000 daN) -2 pairs of lashing rings can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator trough (LC 5,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) One-piece ALU ramps: -One pair of one-piece ALU ramps approx. 2,500 x 600 mm -Ramp with spring lifting mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 tires -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking lights -Galvanized extensions, extendable by approx. 230 mm per side -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon at the rear of the trailer -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -One bracket for the warning signs including socket on the left and right of the gooseneck and on the rear panel Fedpjiu Er Aefx Aaxepp -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container -3 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -a layer of sand painted onto the chequer plates on the gooseneck and on the loading area to prevent slipping -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A bracket for a rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: used, mileage: 514,398 km, power: 456 kW (619.99 HP), overall weight: 27,000 kg, fuel type: diesel, color: black, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro5, loading space width: 2,480 mm, loading space length: 6,150 mm, loading space height: 1,000 mm, first registration: 09/2010, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Scania R620 V8 flatbed with PK 22002EH crane 6x2 Suspension: air-air Wheelbase: 4.50 m PALFINGER crane Type: PK 22002 EH Year of manufacture 2010 4x hydraulic extension 2x hydraulic Support points 1x radio remote control 5+6th operation Length: 6.15 m Width: 2.48 m Height: 1.00 m Equipment: - Retarder (5 levels) - Digital speedometer - Seat heating + ventilation - 1x bed - Cooling compartment - Radio-CD-DVD-Bluetooth - Rear view camera - Electric windows - Sunroof - Sun visor - Trailer hitch (air-ABS-power connection) Fedpfx Ajtrh Sveaxopp We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade reserved.

Condition: excellent (used), axle configuration: 6x4, emission class: euro5, suspension: steel-air, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, crane, differential lock, low noise, onboard computer, MAN TGS 26.400 6x4-4 BL with Palfinger PK-20002 and Meiller 2 side tipper Truck * Wheelbase 3600mm * Liftable and steerable trailing axle * Rockinger 400G150 * Perm. Total weight 26000kg * Payload 10145kg * Euro 5 EEV * Refrigerator Construction * Meiller 2-way tipper * Hardox floor * Aluminum side walls * Lashing eyes in floor (retractable), front and rear wall * Accessory boxes made of aluminum sheet Crane Fpedpfxjvvm Ibj Aaxsp * PK 20002 rear crane * with HPLS system * 400° swivel range * Reach 14.7m / 930kg * 2 compartment supports hydraulically extendable * Radio remote control linear lever * Lighting on the crane arm * No support monitoring(!) Vehicle in good condition. Unfortunately no longer usable in our area due to the exhaust gas restrictions...

Condition: used, mileage: 683,907 km, power: 353 kW (479.95 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, loading space length: 6,600 mm, first registration: 06/2010, next inspection (TÜV): 01/2026, Equipment: air conditioning, crane, MAN 26.480 6x2-2 LL Palfinger Crane PK 23002 Performance REMOTE CONTROL + FlyJib Total outreach approx. 21 meters Last crane inspection valid until 4 x hydraulic outriggers! * First registration: 06/2010 * ZF manual transmission * ZF intarder * Auxiliary heater * Lift-steer axle (3rd axle) Fpedowyyykjpfx Aaxop * Reversing camera * 1 x sleeper bunk * Trailer hitch (AHK) * Cool box * Air conditioning * DuoMatic air connection * Tyres approx. 80%