Tractor

DEUTZ-FAHR Intrac 2004

Condition: used, Year of construction: 1979, operating hours: 450 h, power: 70 kW (95.17 HP), next inspection (TÜV): 03/2027, Equipment: cabin, front linkage, * Deutz Intrac 2004 A-S * As good as new * 1st hand * Vintage H-license plate * Tractor * Only original, first :450h * EZ:10.05.1979 * HU:03/2027 * Total weight:5100kg * Empty weight:360kg * Overall dimensions: 430mm x 2025mm x 2764mm * Diesel * All-wheel drive * 51 kw / 70 HP * 3744ccm * 30 km/h * Cab * Rear hydraulics * Front hydraulics * Rear pto shaft 540/1000 * Front pto shaft 1000 * Air brake * Front triangle front + rear * Work lights front+rear * 3DW hydraulic control units rear * 2DW hydraulic control units front Fjdpjvh Er Aofx Afmjpp * Air seat * Radio * 12 forward - 4 reverse gears * Heating * Full service history ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the vehicle prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for an additional charge. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 29,500 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,100 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system incl. radio remote control * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * External main frame * Hydraulic steering * Comprehensive load securing package * Low bed length: 11,750 mm (6,100 mm + 5,650 mm) or 12,400 mm (6,700 mm + 5,700 mm) * Unladen weight: 13,700 kg (+/- 2%) * Optional: extensive range of accessories This semi-trailer is available with a low bed length of 6,700 mm or 6,100 mm and a short delivery time. Images may differ from the original. All information provided without guarantee. Contact: Tel.: Fpjdpfx Afogvr T Hemsp

Condition: used, operating hours: 200 h, power: 174 kW (236.57 HP), next inspection (TÜV): 03/2025, Equipment: air conditioning, cabin, front linkage, * GPS antenna * Suspended front axle * WARRIOR equipment * DAB Bluetooth radio * Hands-free system * Air conditioning * Auxiliary heating * Max-Comfort driver's seat ----* LED lighting Fedevhv Rpopfx Afmspp * Front and rear power lift * PTO shafts front and rear ----* Tire dimension 1st axle: 600/70R30 * Tire dimension 2nd axle: 710/70R42 ----Vehicle number/Vehicle: 9379----Errors and prior sale excepted ----We are happy to assist you with all the formalities involved in buying a vehicle. Simply let us know your wishes and suggestions and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP approval * Complete export processing * Arrangement of financing * Application for export license plates * Transfer of vehicles * Registration of vehicles * Salvage and vehicle transportation ----YOUR VTS TEAM

Condition: used, Year of construction: 1965, operating hours: 4,922 h, power: 55 kW (74.78 HP), * Convertible top * Rear hydraulics * PTO shaft * Hydraulic connection * Air-cooled Fpsdpfx Asvhuzyofmop * Year of construction: 1965 * Hours: 4922 h (read off) -----Internal vehicle number: 8459----Errors and omissions excepted.

Condition: used, Year of construction: 2016, operating hours: 3,200 h, power: 232 kW (315.43 HP), next inspection (TÜV): 09/2024, Equipment: air conditioning, cabin, front linkage, * Deutz-Fahr 9340 TTV * First registration: 29.04.2016 * Year of construction: 2016 * Operating hours: 3,184 h * Adjustable and heated mirrors * Automatic air conditioning * LED work lights * 60km/h top speed * Performance Steering ready with ''EASY-STEER'' function * Cat III top link for FHK with automatic catch hook * External FHK actuation with 7-pin and 3-pin front socket * Load sensing with 210 ltr/min * Additional el. control unit at the rear with 2x DW connections * Suspended and braked front axle * ISOBUS preparation * i-Monitor 2 12'' screen with color camera Fodpfx Ajvht Hnefmepp * K80 ball head coupling -----Internal vehicle number: 9251----Errors and omissions excepted.

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system Fjdsk Af Svjpfx Afmjpp -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, Year of construction: 2020, operating hours: 3,300 h, power: 96 kW (130.52 HP), front tire size: 540/65R24, rear tire size: 600/65R38, Equipment: compressed air brake, front power take-off, GERMANY / AUTOPOWR / IVT - 50 KM/H / DUAL 10 "COMMAND CENTER DISPLAY / AUTOTRAC READY / JDLINK CAPABLE / 4600 PROCESSOR / MIRROR - WIDE ANGLE / PANORAMA WS / W/B-POST / PREMIUM RADIO / HYDRAULIC PUMP - 114 L/MIN / 1,2,3,&4ELEC. SCV 4 Fedpfx Afouq Nv Hsmjpp

Condition: used, Year of construction: 1972, operating hours: 7,095 h, power: 49 kW (66.62 HP), next inspection (TÜV): 08/2024, Equipment: front linkage, SN 206 Fpsdpju Ddtuefx Afmop IHC 72194 AS tractor Tyres 9.5/9-24 and 16.9/14-30 Power 49 kW Unladen weight 2,895 kg

Condition: used, Year of construction: 2013, operating hours: 8,500 h, power: 110 kW (149.56 HP), front tire size: 480/70R30, rear tire size: 580/70R42, Equipment: compressed air brake, front power take-off, 1551 AutoPow r 40 km/h,stepless & / 2058 ComfortView cab with cab suspension / / 2123 Comfort seat with / low-frequency air suspension, automatic / 2511 2 telescopic exterior mirrors, mechanical / extendable / 2567 with air conditioning and lifting roof Fpedou A Igcspfx Afmop

Condition: used, Year of construction: 2024, operating hours: 704 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 704, First registered: 02/02/2024_____Basic equipment/technical dataENGINE Max. power 195/265 kW/hp (ISO 14396) Max. torque 1200 NmMaximum power with power management 209/285 kW/hp Max. torque with power management 1257 nM 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emissions standard (DOC+SC+SCR) without exhaust gas recirculation stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare cooler package Additional fuel pre-filter with water separator 500 liter fuel tank Fjdpsvgk Iasfx Afmopp