Standard tractor unit

MAN TGS 18.520 4x4 BL Retarder, Hydraulik *Unfall*

Condition: new, maximum load weight: 29,500 kg, overall weight: 42,000 kg, axle configuration: 2 axles, loading space length: 6,100 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2025, Equipment: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system incl. radio remote control Prjdpfjgvr T Hox Ahzof * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * External main frame * Hydraulic steering * Comprehensive load securing package * Low bed length: 11,750 mm (6,100 mm + 5,650 mm) or 12,400 mm (6,700 mm + 5,700 mm) * Unladen weight: 13,700 kg (+/- 2%) * Optional: extensive range of accessories This semi-trailer is available with a low bed length of 6,700 mm or 6,100 mm and a short delivery time. Images may differ from the original. All information provided without guarantee. Contact: Tel.:

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. Psdpfx Aek Af Svjhzsrf -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 61,800 kg, overall weight: 76,000 kg, axle configuration: > 3 axles, Dimensions B 11,970 mm Curb weight 11,200 kg With air suspension, hydromechanical forced steering, easily telescopic loading bed, with access ramps STZ-L gooseneck - Robust welded steel construction - Designed loading bed 3,700 x 2,480 mm - Beveled edge - Hydromechanical forced steering (dual-circuit steering) in a flat design (Overall height 235 mm) with adjustable guide elements - Ball-bearing fifth wheel with replaceable 2" kingpin and adjustable steering wedge - Mechanical seat supports Loading bed - Easily telescopic, designed as an outer/inner tube construction with a 700 mm long, fixed loading bed section at the front - Locking of the extension steps via spring-loaded cylinders Chassis - Air-sprung 5-axle chassis, - Axle assembly BPW (Eco), consisting of one leading-steer axle and three+ hydromechanically forced-steer steering pivot axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Lifting and lowering valve as standard for lowering to a minimum of 790 mm or raising to a maximum of 1000 mm - 1 axle can be lifted Prodpfx Ahjwcy Rzozjf Rear of the vehicle - Straight design with climbing rails - Short 1,260 mm overhang from the center of the last axle - Hydraulic rear support Load-up ramps - 2-part loading ramps with a length of 2,750 mm / 1,550 mm, a width of 800 mm - Maximum load capacity per pair of ramps: 50,000 kg - Hydraulic ramp adjustment - Overall length of the ramps in transport position from the rear edge of the vehicle rear: 300 mm Braking system - Dual-line all-wheel drive air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic brake adjuster (AGS) - Parking brake with spring-loaded cylinders - Anti-lock brake Special equipment - Extendable extensions - Central lubrication system "BekaMax" - All lashing eyes installed that can be ordered - Electro-hydraulic power unit with radio remote control - Lifting option (load-dependent) for the first axle Technical specifications Gooseneck Loading area (LxW): 3,700 x 2,480 mm Overall height over fifth wheel coupling: 235 mm Fifth wheel height when loaded: 1,250 mm Loading area Loading area (LxW) 9,300 x 2,550 mm Telescopic by 4,465 mm Loading height when loaded: 855 mm (+140-60) mm) 2nd driving position: 895 mm (+/-100 mm) Steering 1st axle with leading steering and liftable 3rd and 5th axles with hydromechanical forced steering (dual-circuit steering)

Condition: used, mileage: 59,476 km, power: 382 kW (519.37 HP), tire size: 385/65 R22,5, axle configuration: 4x4, wheelbase: 3,900 mm, color: red, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,080 mm, total width: 2,550 mm, total height: 3,360 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, differential lock, electric window regulation, = Additional options and accessories = - Autoradio Psdpfx Aewhmaajhzerf - Climate control - Electrically operated mirrors - Heater - Mirror heater - Portable radio set - Sunroof = More information = Suspension: air suspension Axle 1: Tyre size: 385/65 R22,5; Brakes: disc brakes Axle 2: Tyre size: 315/80 R22,5 Empty weight: 8.765 kg Carrying capacity: 9.235 kg GVW: 18.000 kg

Condition: used, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 03/2025, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, tire size: 245/70 R 17.5, color: grey, Year of construction: 2025, operation weight: 12,900 kg, Equipment: ABS, You will receive a current & complete inspection and function report with every used trailer. Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm -Gooseneck hydraulically liftable/lowerable and detachable -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external beams in extendable execution "SUPER LOW" design, length approx. 6,850 mm -Low bed with fixed hardwood floor approx. 40 mm thick and mechanical lock Prodpfx Aowp Dx Aohzef -5 pairs of lashing rings foldable outward (LC 10,000 daN) -6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear chassis: -Rear chassis with closed outer frame, chequer plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings foldable outward (LC 10,000 daN) -1 pair of lashing rings lying in the trough (LC 8,000 daN + 5,300 daN) -2 pairs of post pockets for plug-in posts 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDULUM-AXLE", all axles hydro-mechanically force-steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinders with shut-off valves and front plug to secure in raised position -End coating axles with 2 layers of 2-C paint single color in "FAY-Grey-34-0260" painted -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Accessories: -Preparation for the acceptance of screw-on container positions for 1x 20ft or 1x40ft container on the outer beams -2" king pin -One galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection rail at the front -4 wheel chocks -Radio and cable remote control -Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflective tape according to EU regulations -2 wooden blocks 500x250x200 mm -European reflective signs (red-yellow) on the rear of the trailer -On the gooseneck and rear panel left and right each a holder for the warning signs including socket -6 pairs of threaded blocks between the lashing rings under the top belt on the outer beam for mounting screwable RUD rings VLBG-4 -On the gooseneck a separate air connection with air gun -On the gooseneck ALU side walls and rear wall plug-in approx. 2,440 x 400 mm -The rear galvanized removable posts are detachable (structure length approx. 2,560 mm) -2 pairs screwable lashing rings M20 (LC 5,000 daN) -Gooseneck in rear upper area closed with a removable cover -5 pairs of post pockets for plug-in posts 100 x 50 mm in the outer frame of the loading area -Fold-out widenings, about 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the mounting hooks of the low bed -On the loading area a painted sand layer as anti-slip protection -Four warning signs extendable by about 400 mm approx. 423 x 423 mm -Central lubrication system with 2 pumps -Load gauge for determining axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces metallized with ZINACOR 850 (zinc 85% - alu 15%) hot refined

Condition: used, mileage: 440,907 km, power: 375 kW (509.86 HP), first registration: 12/2020, fuel type: diesel, empty load weight: 8,074 kg, maximum load weight: 9,926 kg, overall weight: 18,000 kg, tire size: 315/60 22,5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,600 mm, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2020, operating hours: 440,907 h, front tire size: 315/60 22,5, rear tire size: 315/60 22,5, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, fog lights, navigation system, onboard computer, sliding door, soot filter, spoiler, truck registration, Reference number for inquiries: 69097 MAN, 18.510 * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Power window regulators * Automatic climate control * Refrigerator box * Air suspension * Navigation system * Diesel particulate filter * Retarder / ZF-Intarder * Power steering * Sleeping compartment * Stationary air conditioning * Cruise control * Central locking system * On-board computer * Differential lock * Low noise emissions * Long-haul transport vehicle > 7.5t * Digital tachograph * Radio CD * CB radio * Bluetooth * Sound system * USB interface * Adaptive cruise control (distance keeping assistant) * Lane departure warning assistant * OBU (on-board unit) preparation * Refrigerator * Electric windows and mirrors * Central locking via remote * Air horns * 2 x diesel tank * AdBlue tank * Roof spoiler * Fog lights * Comfort suspension seat * Multifunction steering wheel * Sun visor * Transmission type: Automatic * Suspension: Air/Air * Gross vehicle weight: 18,000 kg * Unladen weight: 8,074 kg * Payload: 9,926 kg * Permissible gross weight: 18,000 kg * Tire condition 1st axle: 30% / 30% - Tire size: 315/60 R22.5 * Tire condition 2nd axle: 40%/40% - Tire size: 315/60 R22.5 * Wheelbase: 3,600 mm * Tire sizes: 315/60 R22.5 * Special Individual Edition * Lamp bar * Swivel seat * Blind spot camera * Lamp bar * Coffee maker * Microwave * Power inverter * MAN telematics * Tire pressure monitoring system (TPM) Prodpsvtk Ugjfx Ahzof * 2 x 480 liter diesel tanks * Rain sensor * Highlight: new model / special edition / lowliner Disclaimer: Subject to change, prior sale, and errors excepted. More images and videos available on our website. Our comprehensive service includes for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documents * Procurement of export/customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TüV certification, registration service * Transfer of commercial vehicles Please contact our trained specialist staff, we will be happy to advise you.

Condition: used, Year of construction: 2012, operating hours: 8,650 h, fuel type: diesel, front tire size: 900/60R42, rear tire size: 900/60R42, tire size: 900/60R42, Equipment: air conditioning, all wheel drive, cabin, compressed air brake, onboard computer, power shift gear, Tyres (front): 900/60R42, Tyres (rear): 900/60R42, Operating hours: 8650, Three-point hitch / rear lift linkage, Front weights, Wheel weights, Beacon light, Load-sensing additional hydraulic circuit (Power Beyond, Load Sensing), Double-acting control valve (5x), GPS system (receiver), automatic steering system, pre-installed automatic steering system_____Wheel weights, side front weights, Location: Customer Podjwnv N Rspfx Ahzorf

Condition: used, mileage: 509,154 km, power: 368 kW (500.34 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 8,181 kg, overall weight: 18,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 4x4, wheelbase: 3,600 mm, color: blue, gearing type: automatic, suspension: steel-air, Equipment: ABS, additional headlights, all wheel drive, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, Urea tank (AdBlue) Displacement 12,419 cc Hydraulics (auxiliary drive) Tilt hydraulics Lane assistant Distance warning system EBS Alloy wheels Euro 6 C Payload 9,819 kg EVB Automatic climate control Sun visor Beacon lights 1 bed Air-suspended driver's cab Cooling box Pjdpfxov H Ddhe Ahzerf Alcoa alloy wheels Errors excepted

Condition: used, Year of construction: 1981, operating hours: 1,850 h, power: 51 kW (69.34 HP), next inspection (TÜV): 01/2027, Equipment: all wheel drive, cabin, front linkage, Deutz Intrac 2004 A-S H-license plate Tractor Only original first: 1,850h EZ: 08/28/1981 HU: 03/2027 Total weight: 5100kg Empty weight: 360kg Overall dimensions: 430mm x 2025mm x 2764mm Diesel All-wheel drive 51 kw / 70 HP Prsdpovh Ez Rofx Ahzjf 3744ccm 30 km/h Cabin Rear hydraulics Front hydraulics Rear PTO 540/1000 Front PTO 1000 Air brake White triangle front + rear Work lights front + rear 3DW hydraulic control units rear 2DW hydraulic control units front Air seat Radio 12 forward - 4 Reverse gears Heating Service booklet maintained ATTENTION!!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to sale, as we are also offering this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8.30 a.m. to 5 p.m., Saturday 8.30 a.m. to 2 p.m. Over 500 new and used trailers always in stock !!! Imprint: Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, overall weight: 43,000 kg, axle configuration: 2 axles, loading space length: 10,650 mm, loading space width: 3,040 mm, loading space height: 3,900 mm, Year of construction: 2021, Equipment: ABS, Technical data for EBERT TLS 43 ATV special low loader: * Permissible fifth wheel load: 19,000 kg * Permissible axle load: 24,000 kg * Permissible total weight: 43,000 kg * Empty weight according to DIN approx.: 12,500 kg * Low bed length i.L.: approx. 6,650 mm + 4,000 mm * Axle table length: 2,700 mm * External width: 2,550 mm * Loading edge/low bed: approx. 200 mm - 350 mm * Sliding table length: 500 mm * Widening/low bed to: 3050 mm * Low bed/telescopic by: 4,000 mm * B-dimension: 12,000 mm * Entire vehicle flame-spray galvanized, with epoxy resin primer and 2K paint * Extra-wide signage at the front and rear with red/white signs Wheels: 9x Michelin 245/70 R 17.5 X MULTI T VB 143J/146F  Steering: TRIDEC DLS with Tritronic  Axles: 12,000 kg ? DLS independent wheel suspension, hydraulically steered and hydraulically sprung High bed at the front: * Doors accessible from the outside in the corners on the left and right * Storage box with lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm * Spare wheel on the high bed, behind the partition on the right * Stairs on the right-hand side to get from the low bed to the high bed at the front * Hydraulic coupling for uncoupling on the left-hand side 6-way Multi-Faster coupling * 6 lashing positions 3,000 kg version outside on the high bed / drop lashing eyes) * 2 lashing positions 5,000 kg version at the top of the longitudinal strands (to the rear)  Low bed: * Climbing aids on the boom? Extension * Low bed can be telescoped by 4,000 mm and can be locked every 500 mm * With sliding table, can be locked every 250 mm * 28 lashing positions 10,000 kg, external version in the outer frame Pjdpfx Ajfiyvhehzjrf * 24 plug-in tubes 90x90, evenly distributed to widen the low bed to 3050 mm * 50 mm hardwood planks are laid between the extension tubes, 10 mm overhang  High bed at the rear: * High bed at the front is slanted and perforated, for retrofitting ramps, galvanized using adapters. * Ramp support profiles at the rear (Altec) ? C - rails * 6 lashing positions 10,000 kg version on the outside of the raised bed * 6 lashing positions 5,000 kg version in the excavator trough * 8 lashing positions 5,000 kg version for extra width in the outer frame * Closure of the excavator trough at the front and rear with a wooden base plate (plug-in)  Electrics: * Use NATO coil, power comes from the towing vehicle * Rotating beacon in the middle of the rear * Side lights in LED version * Standard rear light for vertical mounting (LC5) * Work light on the raised bed, to illuminate the low bed * Uncoupling: Sensor for safety and pressure switch for the suspension Air: * Aluminum air tank 60l (2x 10l, 2x 20l) * TEBS modulator * Locking pull-out left and right (valve on the side in the raised bed at the back) * Double release valve  Hydraulics: * Hydraulic system on the raised bed for steering, suspension and detachable gooseneck  Accessories: * 2x 4 wooden planks as a support for widening the low bed and intermediate table * 2 safety wedges for uncoupling * 4 wheel chocks On request, we can make you a leasing or financing offer from Mercedes-Benz Bank., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Errors and prior sale reserved!