Standard tractor unit

MAN TGX 33.510 6x4 BL SA, Retarder, GX-Fahrerhaus

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Iaodpfx Ahok Af Svs Rju Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: good (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 21,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 05/2009, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 285.70 r 19.5, color: red, Year of construction: 2009, Equipment: ABS, sem eichkorn 2 axle discs with hydraulic tridec steering, extendable from 13.80ma 21.35m, EXTE side posts seats for transporting wood \ logs, exte poles included, twist attachments for transporting 40ft containers, year 2009, side rud hooks, no. 4 aluminum tailboard sections, removable and openable 70cm high, ebs, vehicle already nationalized, CONCEASSIONARY INTERDRIVE SRL-PARMA Ijdpfx Aerum A Toh Rjau

Condition: new, Year of construction: 2023, number of beds: 4, total length: 4,050 mm, total width: 2,050 mm, total height: 2,450 mm, axle configuration: 1 axle, overall weight: 850 kg, Equipment: bathroom, parking heater, * Spring Special: 5% discount on immediately available Niewiadow stock vehicles!!! * N126N - Cross New Sport 4 * Base price: €14,850.00 * Total price incl. equipment: €19,850.00 TECHNICAL DATA: * Trailer type: N126N - Cross New Sport 4 with fiberglass body * Gross weight: 750 kg * Payload: 99 kg * Interior dimensions: L: 293 cm, W: 190 cm, H: 184 cm * Exterior dimensions: L: 450 cm, W: 205 cm, H: 245 cm * Frame: welded steel, hot-dip galvanized * 100 km/h approval * Walls: sandwich construction * Tires: 165/70R13 * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 * Braked axle * Jockey wheel standard * Drawbar cover * Spare wheel with holder * Four stabilizer legs * Entry step, 1x * Power supply unit * Off-grid preparation * Overhead cabinets * Front seating area * Bed: 190 x 118 cm * Sleeping berths: 4 * Bunk beds * Number of persons: 2 * Double-glazed windows * Front and rear double roller blinds * Gas stove, 1 x 2-burner * Refrigerator: 60 liters capacity * Variohead blower heating * Third brake light * Cassette toilet * Sink * Suspension with shock absorbers * Awning lamp * Mini Heki roof hatch * Power supply cable Optional equipment for an additional charge: 1. Truma gas heater Type S: 3004 P, for models N126 N/NT/NN/NL: net €1,151.26 / gross €1,370.00 2. Awning, depth 240 cm: net €726.89 / gross €865.00 3. Sun canopy, as above, 2.5 x 2.4 m: net €157.14 / gross €187.00 4. Anti-sway coupling, installed (only in combination with new vehicle): net €189.08 / gross €225.00 5. Propex blower heater: net €1,848.74 / gross €2,200.00 6. TRUMA Varioheat blower heater: net €2,794.00 / gross €3,325.00 7. Electric boiler, 5 liters: net €332.77 / gross €396.00 8. Gas boiler, 10 liters: net €1,067.23 / gross €1,270.00 9. Shower with electric instantaneous water heater: net €726.89 / gross €865.00 10. Shower with gas instantaneous water heater: net €1,546.22 / gross €1,840.00 11. Off-grid battery, installed and connected, 80 Ah, incl. battery compartment: net €249.58 / gross €297.00 12. Oven/grill, Thetford Duplex, gas-operated: net €697.48 / gross €830.00 13. Upgrade to 1000 kg: net €310.93 / gross €370.00 14. Alloy wheels: net €239.50 / gross €285.00 15. Mosquito net for entrance door from the top: net €130.25 / gross €155.00 Further optional equipment on request. Plus delivery charge: €795.00 and €99.00 for TÜV/gas inspection/vehicle registration certificate. All prices incl. VAT. All devices are demonstrated upon purchase, including a briefing on the gas system. General inspection (Dekra) and gas inspection are NEW. We are happy to accept your "old" caravan as a trade-in. We accept trade-ins of all brands! We are open six days a week. If desired, we can arrange a temporary license plate for you (please call in advance). Many more affordable and well-maintained caravans can be found on our homepage, where you can also learn more about our company. Iedpferm N Ntjx Ah Rjau Open daily from 09:00 to 18:00, Saturday 10:00 to 14:00. We look forward to your visit! The new 2026 Niewiadow models have arrived. Come and have a look—it’s worth it! Our location at Kollerupholz 1, 24991 Großsolt offers a large selection of new and used caravans. We also have a huge camping shop. Our workshop offers general inspections (Dekra) and gas inspection services on-site, as well as all repairs related to caravans. Errors and prior sale excepted.

Condition: used, mileage: 182,130 km, power: 294 kW (399.73 HP), first registration: 02/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro5, loading space length: 4,800 mm, loading space width: 2,400 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Phone: call (Contact · Telephone · Mobile · WhatsApp) Special Equipment: Storage box, rear axle load 13.0 t, trailer coupling: Ringfeder 5050 A, car phone antenna, traction control system (ASR), trailer data display, work lights (2) on cab roof, audio system: MAN Topline radio 12V with navigation system, exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electric maneuvering aid, 175 Ah battery, mechanical battery master switch, electrically adjustable and heated curb mirror (right), bolted bridge mounting brackets, air horns on cab roof (2), cab: reinforced suspension, cab: with 2 rear wall windows, tinted, cab: with exterior grab handle, comfort driver’s seat, air-suspended, heated and ventilated with lumbar support, flame start system, generator 28 V / 110 A, 12-speed transmission - type: ZF 12 AS, Tipmatic, rear axle AP HPD-1382/HP-1352, hydraulic pump (Meiller-pump 265/1), rocker lever - brake EVBec controlled, automatic climate control, multifunction steering wheel, high-mounted air intake, dust pre-separator air filter, air deflector against dust swirl, heated air dryer, PTO NH/4C without flange, retarder, seat cover/upholstery: comfort quality, external sun visor, sun roller blind for side window, driver’s door, sound system, stone guard grille in front of radiator, control module for external data exchange, foldable rear underrun protection, rear wall window curtain, extra step for construction vehicles, heated additional fuel filter with water separator Additional Equipment: Axle configuration: 6x4, approach/front mirror, trailer socket 24V / 7-pin, trailer ABS socket, MAN-Tronic on-board computer, rear axle differential lock, MAN Brakematic electronic braking system, EURO 5 engine, cab: M (medium length), suspension: leaf/leaf, electric window lifts, tinted windscreen, manual roof hatch, body type: tipper, rocker lever - brake EVB, heated fuel filter, fuel tank: combination tank - 300 L diesel + 40 L urea solution (AdBlue), air compressor 1-cylinder 360 cc, engine 10.5 L - 294 kW diesel, side-mounted spare wheel hoist, front axle disc brakes, rear side windows tinted, sunblind for front windscreen, spray mist reduction, stabilizer on both rear axles, front axle stabilizer, 3-piece steel bumper, rear axle drum brake, tinted door windows, viscous fan, front axle VO-09 straight, central locking, permissible total weight 26,000 kg * VIN: WMA26SZZXBM559896 * 3-way tipper * With Boarmatik * 6-stage retarder * Full leaf spring suspension * Automatic climate control Iaodpfx Aheqcrifs Rju * Seat heating / seat ventilation * Euro 5 EEV * Curb weight: * Payload: * Total weight: 26,000 kg * Wheelbase: * Tipper length: 4.80 m * Tipper width: 2.40 m * Truck year: 2011 * Valid inspection (TÜV) until 02/2023 * ----Palfinger PK 15002 * Serial number: 0811158 * High boom * Rotator + grab connections * 4 hydraulic extensions * Lifting capacity: 2820 / 1820 / 1240 / 880 / 660 kg * Outreach: 4.3 / 5.9 / 7.9 / 10.2 / 12.4 m * Crane year: 2002 * ----Net price * All information subject to change

Condition: new, color: white, total length: 2,700 mm, total width: 1,850 mm, total height: 1,800 mm, axle configuration: 1 axle, overall weight: 750 kg, CARAVAN N126D * Trailer type N126D * Total weight 750 kg * Payload 178 kg * Interior L: 270 cm, W: 185 cm, H: 180 cm * Drawbar cover: no * Welded steel frame, hot-dip galvanized * Axle manufacturer: AL-KO or KNOTT * Number of axles: 1 * Braked axle * Jockey wheel as standard * Spare wheel * 4-point swivel steadies * 1 entry step * Power supply unit * Wall cabinets * Sleeping area: 185 x 122 cm * Sleeping places: 3 * Capacity: 2 adults + child * Double windows (openable) at the front and rear * Double blinds at the front and rear * 1 gas stove (2 burners) * 57-liter refrigerator Contents * Sink * Without toilet * 3rd brake light * Awning light * USB socket * 80 Ah self-sufficient battery * Pop-up roof * Shock absorber suspension Plus pre-freight costs of €795.00 and €99.00 for TÜV/gas inspection/registration certificate II Prices include VAT. Images may not reflect standard equipment; technical changes (e.g., tire sizes) are subject to change. Delivery: Delivery by freight forwarder possible, €1.50 per kilometer throughout Germany one way (from Seesen to the destination), minimum €270.00 plus VAT. Visit us at // Iedpfxsua Rife Ah Reau =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =. =.=.=.=.=.=.=. You can also get your desired trailer and accessories here by arrangement: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=. =.=.=.=.=.=., ?Financing or leasing available. Visit us at Images may not reflect standard equipment; technical changes (e.g., tire sizes) are subject to change.

Condition: new, functionality: fully functional, mileage: 100 km, power: 382.46 kW (520.00 HP), fuel type: diesel, tire condition: 100 %, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking heater, power assisted steering, retarder, seat heater, soot filter, spoiler, tire pressure monitoring, traction control, MAN TGX 18.520 4X2H BL Tractor Unit with HydroDrive, MEILLER Tipping Hydraulics, PriTarder, Alloy Wheels, Seat Ventilation, etc. • New vehicle • MAN HydroDrive – hydrostatic drive on the 1st axle Ijdpfx Asxvq E Tjh Rjau • MEILLER Tipping Hydraulics • Alloy Wheels – Alcoa Dura-Bright EVO • GM cab with roof spoiler • Air-suspended cab, comfort version • Leather steering wheel • 390 l aluminium diesel tank • 80 l AdBlue plastic tank • 200 l aluminium hydraulic oil tank • MAN PriTarder • Disc brakes • MAN EasyStart anti roll-back assist • 382 kW / 520 HP • Automated gearbox with selectable driving programs • Wide-profile tires on the front axle • Differential lock on rear axle • Suspension: leaf/air • Mechanical lifting roof • Side flaps with aerodynamic, reversible extensions, foldable left and right • Sun visor • Door extensions • LED lighting system • LED tail lights • 2 x air horns on cab roof • 2 x LED rotating beacons on cab roof • 2 x LED work lights at rear of cab • Electrically adjustable and heated exterior mirrors • Seat covers – part leather • Driver comfort seat, air-suspended with lumbar support and shoulder adjustment • Seat ventilation • Multifunction leather steering wheel • MAN EasyControl – 4 functions • Radio pre-installation • Air conditioning • Auxiliary water heater – stationary heating • 1 bunk • Electric sunblind for windscreen • Pull-out refrigerator • ACC cruise control • Navigation system • JOST JSK 37 C 2-inch fifth wheel coupling • Fifth wheel with automatic lubrication

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Ijdpol Sl Izsfx Ah Roau Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with bevelled corners at the front 45° and with a rear bevel of approx. 750 mm x 10° •3 pairs of lashing rings •Hardwood flooring 30 mm thick Loading area in extendable version: •Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° •Cutouts in the outer frame of the loading area for hanging tensioning straps •Hardwood flooring approx. 48 mm thick, checkered sheet covering over the axles Two-part steel ramps: •One pair of galvanised, two-part steel ramps with approx. 48 mm thick hardwood flooring •Ramp with hydraulically foldable and unfoldable ramp parts, hydraulic lifting mechanism and hydraulically movable •Maximum load per pair: approx. 40,000 kg Axles and Tires: •BPW axles and suspension, 2 axles rigid, 1 axle with self-steering •Technical axle load: 12,000 kg •Electro-magnetic reversing lock can be activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Brake system: •WABCO brake system in accordance with EU regulations with EBS-E Paintwork: •First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer •A high-quality 2-component top coat in one color in MB 7350 Nova gray •Rear section metallized and painted in RAL 9010 Seatposts: •JOST seatposts with 2-speed gearbox for 24t lifting load (50t test load). Steel construction: •Steel construction made of high-strength fine-grain steel •Steel qualities: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system in accordance with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Accessories included: •A spare wheel with holder •A galvanized steel bulkhead approx. 400 mm high •Yellow-red air couplings on the galvanized front connection panel •4 wheel chocks •A bracket for a rotating beacon at the rear of the trailer •Mounting in the rear area of the gooseneck for aluminum docking ramps •Galvanized folding supports under the bevel of the loading area •Cover plates to bridge the space between the ramps and the loading area •White Reflective tape in accordance with EU regulations on the side, on the extension and at the rear, red Isdshlz S Nopfx Ah Rjau •Electro-hydraulic unit at the rear, under the loading area •A holder for the warning signs including a socket on the gooseneck and on the ramps on the left and right •Control valves for the ramps attached to the right-hand side of the trailer •ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm •The rear, galvanized plug-in stanchions are removable (length of the structure approx. 2,560 mm) •Four warning signs extendable by approx. 400 mm with a position light •3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container •6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading area •Galvanized extensions, extendable by approx. 230 mm each Page •Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area bevel •A painted layer of sand on the checker plates, above the kingpin and the loading area as anti-slip protection •Load pressure gauge for determining the axle loads including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 16,200 mm, loading space width: 2,750 mm, loading space height: 960 mm, total length: 16,200 mm, total width: 2,750 mm, suspension: hydraulics, tire size: 235 / 75 R17.5, color: blue, Year of construction: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailers Year: 2009 Brand: Goldhofer Additional information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King-Pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg GVW: 106,000 kg Empty weight: 23,480 kg Loading capacity: 82,520 kg Axles Brand axles: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle friction steering 2nd axle rigid Axles 3 to 8 hydraulic steering Axle 1 & 2 liftable Tyres: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Max extended length: 24,500 mm Loading floor length: 12,300 mm to 20,600 mm Loading floor width: 2,750 mm Loading floor height: 955 mm King-Pin height: +/- 1,280 mm Additional Information Operated on truck hydraulics Hydraulic operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox in gooseneck King-pin 3.5” Central greasing Markerboards oversize load Radio remote control = Further information = General Information Year of manufacture: 2009 Axle configuration Tire size: 235 / 75 R17.5 Axle brand: BPW Suspension: hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tires; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 6: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 7: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 8: Twin tires; Max. axle load: 10,000 kg; Steered Weights Empty weight: 23,480 kg Payload: 82,520 kg GVW: 106,000 kg Functional Loading floor height: 96 cm Extendable structure: Yes Condition Technical condition: very good Optical condition: very good Ijdpswwkrlefx Ah Rsau Financial Information Price: On request

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading area: -2 pairs of lashing rings can be folded outwards (LC 5,000 daN) 24 pairs of cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, air-sprung, with disc brakes (430 mm), with lifting/lowering function -385/65 R 22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) -No metallic paint finish possible Steel construction: -steel construction made of high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690Mpa) Electrical system: -Electrical system according to EU regulations -Lighting 24 Volt -ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets -Connection according to ISO. -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes with bracket -2" kingpin -One galvanized steel end wall approx. 1,600 mm high. EN12642-XL -White reflector tape in accordance with EU regulations on the side of the trailer and red at the rear -European reflector plates (red/yellow) at the rear of the trailer -Loading area with approx. 30 mm thick hardwood floor edged in omega profiles -10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Storage for 1,000 mm stanchions, at the rear in the central support -1 Spare wheel holder under the cargo bed on the right in the direction of travel -One mud flap at the rear of the trailer -Manual and description on USB stick -One bracket for a rotating beacon at the rear of the trailer -One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container. Flush with the rear -Speed stickers 80 km/h at the rear and on both sides -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with one LED position light -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%) Isdpfx Aeiu Etksh Roau