Lowbed semitrailer for transportation of construction machinery

Lider Lowbed Front Load

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips Blodpfxstx Nwnj Affec * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: used, empty load weight: 20,320 kg, maximum load weight: 46,180 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, first registration: 01/2004, tire size: -, Year of construction: 2004, Ref: 2220 Extra low-bed trailer with 3 rear axles + 1 front axle (dolly). Maximum authorized weight: 66 T. Trailer with detachable gooseneck. Extendable trailer (5 m). Trailer with 3 forced steering axles (and manual remote control). Trailer can be driven with or without a dolly. Total trailer length: 16.43 m + 5 m (extendable). Tare weight: 20,320 kg + 2,520 kg for a dolly. Gooseneck: L= 4.43 m. Extra low-bed: L= 7.5 m + 5 m (extendable). Height: 0.5 m. Trailer width: 2.74 m. Dock above rear axles: L= 4.5 m. H= 1.05 m. Dipper pit for excavator dippersticks. Rear ramps. Hydraulic (removable) and hydraulic ramp movement Tow tires: 285/70R19.5 Dolly tires: 235/75R17.5 Serial number: YA9TL366B04113968+122B4113969 Blsdpjwcrzrefx Affsc

Condition: used, functionality: fully functional, empty load weight: 13,000 kg, maximum load weight: 37,100 kg, overall weight: 50,100 kg, axle configuration: 3 axles, first registration: 07/1995, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: blue, Year of construction: 1995, Equipment: ABS, de angelis extendable cradle trailer, year 1995, payload up to 37 tons, 3 axles with pneumatic suspension, abs, 2nd and 3rd steering axle, extendable chassis with additional 3.50m central extension, 5.0m closed cradle, height from ground 44cm, removable headroom above axles, manual rear ramps, good condition, INTERDRIVE SRL-PARMA DEALER Bljdpfx Aowa T T Reffec

Condition: used, Year of construction: 2006, operating hours: 3,038 h,

Condition: good (used), axle configuration: 3 axles, loading space length: 18,520 mm, loading space width: 2,750 mm, loading space height: 450 mm, total length: 18,520 mm, total width: 2,750 mm, total height: 450 mm, suspension: hydraulics, tire size: 245 / 70 R17.5 | Load index 146/146F, color: white, Year of construction: 2014, Colour: White Wheelbase: 136 cm Payload weight: 53,800 kg Cargo floor height: 45 cm Extendable Braked Manufacturer: Goldhofer Type: STZ-VP 3-55/80A VIN: WG0STZV39E0036631 Year of manufacture: 2014 Weights: King pin load: 35,000 kg Axle load: 12,000 kg Total axle load: 36,000 kg Gross vehicle weight (GVW): 71,000 kg Empty weight: 17,200 kg Payload capacity: 53,800 kg Dimensions: Length: 15,520 mm + 3,000 mm extension Loading floor length: 6,300 mm + 3,000 mm Loading floor width: 2,750 mm Loading floor height: 450 mm Bogie height: 1,100 mm (+385 mm / -215 mm) King pin height: 1,390 mm Axles: BPW eco Pendle axles All axles with hydraulic steering Tyres: 245/70R17.5 ABS / EBS Additional information: 1x Extendable Hydraulic operation system powered by truck PTO Detachable gooseneck with front loading ramps Bedsxyh I Tjpfx Affolc Excavator trough Radio and cable remote control Lashing rings Stake pockets Wooden loading floor Stainless steel toolbox 2x Spare wheels with holder Working lamps Rear bumper with lights King pin 3.5'' Central lubrication system Beka-Max = Further information = General information Year of manufacture: 2014 Axle configuration Tyre size: 245/70 R17.5 | Load index 146/146F Axle brand: BPW hydraulic pendle axles Suspension: hydraulic suspension Rear axle 1: twin tyres; Max axle load: 12,000 kg; Steered Rear axle 2: twin tyres; Max axle load: 12,000 kg; Steered Rear axle 3: twin tyres; Max axle load: 12,000 kg; Steered Weights Unladen weight: 17,200 kg Payload: 53,800 kg Gross weight: 71,000 kg Functional Extendable body: Yes Condition Technical condition: good Visual condition: good Financial information Price: On request Further information Please contact Stefan Schaapveld for more details.

Condition: used, color: red, Year of construction: 2009, Faymonville STBZ-3VA. Year of manufacture: 2009 10-ton SAF axles. Unladen weight: 16,000 - 16,500 kg. Maximum permissible weight: 60,000 kg. Kingpin load: 30,000 kg. Hydraulics compatible with NATO connections. Aluminum side boards + toolbox mounted on the neck. Hydraulic detachable gooseneck. Extendable by 6 meters. 2 x 25 cm hydraulic widening. Air suspension. Excavator bridge: 4,300 x 950 mm. Galvanized (zinc-coated). Dimensions: Neck: Length: 4,500 mm Width: 2,500 mm Height: 1,850 mm Kingpin height: 1,300 mm Deck: Length: 8,000 mm Width: 2,750 mm Height: 500 mm Deck thickness: 300 mm Rear section: Length: 4,300 mm Width: 2,750 mm Height: 950 mm Tires: 235/75R17.5 (80% tread remaining). Dolly D-1: Year of manufacture: 2008 First registration: 2009 10-ton BPW axle. Blsdpfxex U U Eqs Affoc Weight: 2,400 - 2,600 kg. Maximum permissible weight: 28,000 kg. Kingpin load: 18,000 kg. Tires: 235/75R17.5 (80% tread remaining). German trailer! 2 units available! ID NO: 631. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements concluded by Heinhuis, as well as all pre-contractual negotiations. By responding in any form, you accept the applicability of the Heinhuis General Terms and Conditions and declare that you have taken note of these conditions. All prices quoted are net export prices. = Further information = Year of manufacture: 2009 Unladen weight: 16,000 kg Payload: 44,000 kg Gross vehicle weight: 60,000 kg Extendable body: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: new, empty load weight: 7,900 kg, maximum load weight: 41,600 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, operation weight: 7,900 kg, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface with rear slope of approx. 1,000 mm x 8° -Recess in the chamfer and protruding into the loading surface to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm Cut-outs in the outer frame of the cargo bed for attaching tensioning straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -TPMS tire pressure monitoring system in accordance with ECE R 141 Bedpfxounrape Affolc -235/75 R 17.5 tires Paint finish: -Complete steel construction automatically blasted after welding with blast wheel system -second blasting with corundum for optimum adhesion of the coating system -Finishing coat with 2 layers of 2K top coat, single color in RAL MB 7350 nova grey -Rims painted in silver -Rear section metallized and painted in RAL 9010 (pure white) -Sealing of cavities with special wax Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 2x 7-pin & 1x15-pin Accessories included: -Extensive lashing positions -2" kingpin -One galvanized steel end wall approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon at the rear of the trailer -Galvanized extensions, extendable by approx. 230 mm per side -White reflector tape in accordance with EU regulations on the sides and red at the rear -On the gooseneck and on the rear plate on the left and right, one bracket each for the warning signs including socket -ALU drop sides and rear panel can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Sliding attachment strip for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -a layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -Four warning signs that can be extended by approx. 400 mm, approx. 423 x 423 mm with a position light -One bracket for rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -European reflector plates (red/yellow) at the rear of the trailer -Manual and description on USB stick -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: used, color: green, Year of construction: 2015, Faymonville F-S44-1ACA. Year of manufacture: 2015. 10-ton SAF axles. Unladen weight: 22,250 kg. Load capacity: 57,750 kg. Gross vehicle weight: 80,000 kg. Kingpin load: 40,000 kg. EBS, ABS, ALB. Hydraulics can be operated via the truck’s NATO coupling. Alloy planking on the gooseneck. Hydraulically detachable gooseneck. Air suspension. Extendable by 5 meters. Radio remote control. Excavator deck: 5,600 mm x 950 mm. Tyres: 235/75R17.5, 80% tread. Dimensions: Gooseneck: Length: 4,900 mm Width: 2,500 mm Height: 1,800 mm Kingpin height: 1,300 mm Main deck: Length: 8,000 mm Width: 2,750 mm Height: 500 mm Deck thickness: 300 mm Rear section of trailer: Length: 5,600 mm Width: 2,750 mm Height: 1,050 mm Dolly D-2. Year of manufacture: 2015. 10-ton SAF axles. Unladen weight: 3,650 kg. Gross vehicle weight: 36,100 kg. Kingpin load: 16,100 kg. Air suspension. Tyres: 235/75R17.5, 70% tread. German trailer! 4 units available! ID No: 552. Heinhuis General Terms and Conditions apply to all advertisements, offers and quotations from Heinhuis, to all agreements concluded by Heinhuis, and to negotiations preceding the same. By responding in any form, you accept the applicability of the Heinhuis General Terms and Conditions and confirm that you have taken note of these General Terms and Conditions. Our prices are net export prices. = More Information = Year of manufacture: 2015 Unladen weight: 22,250 kg Payload: 57,750 kg Gross vehicle weight: 80,000 kg Bledpfxex R Umyj Affec Extendable chassis: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: used, maximum load weight: 54,020 kg, overall weight: 69,000 kg, axle configuration: > 3 axles, first registration: 03/2015, loading space length: 16,530 mm, loading space width: 3,250 mm, total width: 2,750 mm, total height: 3,300 mm, Year of construction: 2015, Equipment: ABS, Nooteboom OSD-73-04V Semi Low Loader First registration: 23-03-2015 SAF axles 2 self-steering trailing axles 1 lift axle Drum brakes with ABS and EBS Tyres: 245/70 R17.5 approx. 40% Air suspension Gross weight: 69,000 kg, unladen weight: 14,980 kg, payload: 54,020 kg Low bed length: 9.25 m + 3.00 m, gooseneck length: 4.30 m, total loading length: 16.55 m Width: 2.75 m + 2x25 cm = 3.25 m Bljdpfx Afsx Epdvsfoc Load floor height: approx. 90 cm Stake pockets Lashing eyes 2 rear supports Hydraulic ramps with side shift Errors, omissions and prior sale excepted