Low loader trailer

MÜLLER-MITTELTAL T 30,0 Kompakt / 3 Achser / Blatt /Rampen/

Condition: used, Year of construction: 1999, Payload: 19,990 kg Ndsdpfxjutw I No Ahzof Gross vehicle weight: 8,010 kg Front tire condition: 70% Rear tire condition: 70% Front tires: 245/70 R 17.5 Rear tires: 245/70 R 17.5 Please contact PFEIFER GROUP for further information.

Condition: used, Year of construction: 2025, operating hours: 20 h, JUWEL 8 M V 5 N 100 OF VF-2025 Lemken Mounted Reversible Plough In standard configuration, additionally equipped with: Version: OF (On-land/rough conditions) Frame swing-in: Frame with hydraulic drawbar Turning cylinder: with hydraulic tilt adjustment + control unit Tilt indicator: on the turnover mechanism Frame height: 85 cm, clearance = 35 cm (5x) Mouldboard type: Strip Dural (5x) Body type: BS42S Support with brace Offset with wearing plate (5x) Share: Cutting width 42 cm (SB56, strip type) Share design: thick (5x) Landside: A42H Mouldboard edge: standard Furrow/Universal wheel: Universal wheel, pneumatic 340/55-16 Wheel position: standard Fertiliser insert mouldboard: MS2 (5x) Fertiliser insert share: medium 18 cm Fertiliser insert stalk type: standard (5x) Fertiliser insert stalk length: standard Throw angle adjustment: without throw angle adjustment Disc coulter: 1 pair D500 smooth, side by side Packer arm: preparation Lighting system: (EU) preparation, 7-pole socket Working width per plough body: 30-50 cm / 30-55 cm / 36-60 cm Overload protection: double-cut shear bolt Ndjdpfxow S N U Te Ahzjf BODY SET Lemken Body Set Juwel 8 V L 100 In standard configuration, additionally with: Working width per plough body: 20 - 55 cm Frame height: 85 cm, clearance = 35 cm Body type: BS42S Support with brace Shares: 2SPS + SB45D / SB56D Landside: A42H Fertiliser insert: MS2-S245 Fertiliser insert stalk: standard Coulters: 1 pair Suitable for Lemken Juwel 8 M V 5 N 100

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Njdewx Dcyepfx Ahzjdf Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, next inspection (TÜV): 03/2024, loading space length: 8,000 mm, loading space width: 2,520 mm, loading space height: 910 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, leaf suspension, 3-axle, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydr. ramps, rear support, aluminum side bumpers, twin tyres, storage box Superstructure: Hydr. ramps, can be widened to 3m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ndodpoqpgtmofx Ahzef

Condition: good (used), axle configuration: > 3 axles, total length: 13,600 mm, total width: 2,500 mm, total height: 900 mm, suspension: air, tire size: 7.50 R20, color: other, Axle configuration Brakes: Drum brakes Suspension: Air suspension Front axle: Tyre size: 7.50 R20; twin tyres; max. axle load: 8,000 kg; axle make: BPW Rear axle 1: Tyre size: 445/45 R19.5; max. axle load: 8,000 kg; axle make: ROR Rear axle 2: Tyre size: 445/45 R19.5; max. axle load: 8,000 kg; axle make: ROR Ndodpsur Sx Hefx Ahzof Rear axle 3: Tyre size: 445/45 R19.5; max. axle load: 8,000 kg; axle make: ROR Weights Unladen weight: 7,500 kg Payload: 26,500 kg Gross vehicle weight: 34,000 kg Condition Technical condition: good Visual condition: good Damage: none

Condition: used, machine/vehicle number: GE12/084/2023, empty load weight: 7,000 kg, maximum load weight: 17,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 07/1998, suspension: steel, Equipment: center pivot plate, 1st hand vehicle Golfhofer TU3-24/80 Low loader Checkbook maintained inspection book hydr. ramps Payload - 17000 kg Lashing eyes in the cargo area Commercial/export net price - 9990 € Subject to alterations, prior sale and errors Nodpfx Ahomx U Dpszjdf reserved ===== Telephone Mobile phone =====

Condition: used, maximum load weight: 13,470 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 7,075 mm, total width: 2,550 mm, total height: 1,150 mm, Year of construction: 2023, Equipment: ABS, Immediately available stock vehicle with daily registration in 07/2024 ABS, EBS-E, RSS, 2x 10 ton axles (Gigant), steel rims, tires 235/75 R17.5, drum brake, automatic slack adjuster, air suspension, lifting + lowering function, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal for display on display in the driver's cab (truck must be prepared accordingly, no calibrated scale), release valve on the front axle, spring brake on the rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made of galvanized sheet steel approx.: 1,000x300x600mm, storage box for container net approx.: 1,000x300x600mm, side protection device closed, underrun protection fixed, rear apron on the underrun protection, A-shield foldable, Ramp compartment including aluminum ramps (2,800 mm, long 470 mm wide, approx. 10,600 kg load capacity/pair), hot-dip galvanized chassis, modular lights, some LED, 2 additional LED reversing lights at the rear of the vehicle. La-Si package: 8 pieces of UVV fall lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the outer frame (protruding by the material thickness) ? Arrangement: 1 pair in front of the rear carrier / 3 pairs in the flat loading area, 1 pair of folding lashing eyes (LC 13,500 daN) on the front wall carrier, 3 pairs of folding lashing eyes (LC 10,000 daN) recessed in the outer frame, 8 interchangeable trough stops for lateral centering of the tipping troughs, 4 front trough stops plugged in with a swinging stop. Duomatic coupling head / 15-pin power supply Drawbar 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Truck coupling height: approx. 780-980 mm Container length: 5,500 mm - 7,000 mm i.Li. or 2x 10 cbm ASK troughs or construction machine transport Height: approx. 950 mm with unloaded vehicle (centering edge 970 mm) 20,000 kg GG technically possible Nodpfx Aheugzqtszjdf Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, garbage collection vehicles, mobile cranes and work platforms... Talk to us! Do you need financing? We would be happy to provide you with a non-binding financing offer. The offer is subject to change, without warranty or guarantee. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. Until the money is received, there is no reservation or claim to availability. The purchase is only finalized when payment is received. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment is made. Payments are only accepted in euros at no additional cost to the seller and only by bank transfer or cash. No checks.

Condition: used, maximum load weight: 14,826 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2025, loading space length: 7,000 mm, Year of construction: 2025, Equipment: ABS, 2-axle 18 to Hüffermann sled roll-off trailer "NEW" type HSA 3 / 20.71 ZB "sled carrier" for roll-off container lengths from 5.0 m to max. 7.0 m, SAF axles 2x 10.000 kg air-suspended with automatic lowering when uncoupling the brake, Wabco brake system, ABS, disc brakes with electronic brake and stability system EBS-E and RSS (significant reduction of the risk of the vehicle rolling over, reduced wear of the brake lining), Weight detection/axle load display via EBS-Canbus signal for display in the driver's cab (truck must be prepared accordingly), tire pressure monitoring system in accordance with ECE Directive 141, automatic slack adjusters, certified load securing with 4-fold pneumatic locks, side protection device in anodized and closed design, V-drawbar approx. 2600 mm long, 40 mm eyelet, tool storage box 600 x 500 x 500 mm, tires 265/70 R 19.5 // 8-ply, Hella module lights in part LED, flashing LED side marker lights, additional 2 pcs. LED reversing lights, LED position lights front and rear, folding A-plate and ADR plate, contour markings white at the sides, yellow at the rear, underride guard with bumper and rear skirt, 15-pin power supply, Duomatic coupling head, painted in RAL color DB 7350 nova grey, silver rims, black KTL-coated axles, hot-dip galvanized add-on parts, total weight 18.000 kg, technically possible 20.000 kg, new vehicle, immediately available from stock Bünde, without first registration incl. manufacturer's warranty, sale only to tradesmen ! All information without guarantee ! Subject to errors and prior sale ! Ndedpfx Ahjt Iqhljzef

Condition: used, maximum load weight: 18,610 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 7,075 mm, total width: 2,550 mm, total height: 1,150 mm, Year of construction: 2023, Equipment: ABS, Immediately available stock vehicle with daily registration in 07/2024 ABS, EBS-E, RSS, 3x 9 ton axles (Gigant), steel rims, tires 235/75 R17.5, drum brake, automatic slack adjuster, air suspension, lifting + lowering function, 2nd axle as lifting axle, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal for display on display in the driver's cab (truck must be prepared accordingly, no calibrated scale), release valve on the front axle, spring brake on the rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made of galvanized sheet steel approx.: 1,000x300x600mm, storage box for container net approx.: 1,000x300x600mm, side protection device closed, underrun protection fixed, rear apron on the underrun protection, A-sign foldable, ramp compartment including aluminum ramps (2,800 mm, long 470 mm wide, approx. 10,600 kg load capacity/pair), hot-dip galvanized chassis, modular lights, some LED, 2 additional LED reversing lights at the rear of the vehicle. La-Si package: 8 pieces of UVV fall lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the outer frame (protruding by the material thickness) ? Arrangement: 1 pair in front of the rear carrier / 3 pairs in the flat loading area, 1 pair of foldable lashing eyes (LC 13,500 daN) on the front wall carrier, 3 pairs of foldable lashing eyes (LC 10,000 daN) recessed in the outer frame, 8 interchangeable trough stops for lateral centering of the tipping troughs, 4 front trough stops plugged in with a swinging stop. Duomatic coupling head / 15-pin power supply Draw fork 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Truck coupling height: approx. 780-980 mm Container length: 5,500 mm - 7,000 mm i.Li. or 2x 10 cbm ASK troughs or construction machine transport Height: approx. 950 mm with unloaded vehicle (centering edge 970 mm) 27,000 kg GG technically possible multiple available!! Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, garbage collection vehicles, mobile cranes and work platforms... Talk to us! Do you need financing? We would be happy to provide you with a non-binding financing offer. The offer is subject to change, without warranty or guarantee. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. No reservation or claim to availability exists until the money has been received. The purchase is only concluded when payment has been received. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment has been made. Payments are only accepted in euros at no additional cost to the seller and only by bank transfer or cash. No checks. Ndjdeugzqyspfx Ahzef

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * Load securing package * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 2 x 12-ton Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm draw eye and height adjustment device * Toolbox made of powder-coated steel sheet, right side * Reflective contour tape on sides and rear * Side underride protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport, suitable for container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp lock and mechanical plug-in front stop blocks in the running track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plugged in with swiveling bump stops * 3 pairs of 10-ton UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of the skips, 4 cloverleaf-shaped lashing brackets (side) each, and 1 pair of 13.4-ton UVV lashing rings at the front, load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Welded bead as an anti-slip surface in the drive-up area * Mechanical rear supports * 1 pair of aluminum approach ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * 235/75 R 17.5 twin tires * Unladen weight: 4,360 kg * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted Ndjdpfjl Thwcsx Ahzjf * Immediately available from Egestorf