Semi low-loader

Nooteboom MCO-74VV

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -closed outer frame with cut-outs for lashing straps (LC 1,500 daN) -steel floor covering with anti-slip coating -including perforated strip for aluminum docking lights -2" kingpin -Mechanically operated BPW seat posts -550 mm long, 8' chamfer at the gooseneck end -Front wall incl. parking position for rear wall, 400 mm high Hedpfx Absi Ai E Rjuopa -Spare wheel holder mounted upright on the front of the gooseneck -3 pairs of LC 5,000 daN lashing rings recessed in the loading area of the gooseneck -Aluminium plug-in drop sides 400 mm high, consisting of 2x drop sides, side length 3,150 mm and rear drop sides with stanchions (galvanized) -Rectangular storage box, aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, center -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, left -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, right Loading area, easily telescopic: -closed outer frame with cut-outs for tension belts (LC 1,500 daN) -Fixed part at the front 700 mm Sheet metal floor covering with anti-slip coating -Angled interface between fixed section and loading area for attaching bridging rails and wheel recesses -Excavator trough incl. slotted holes for load securing (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -spars for widening to 3,000 mm -Sloping vehicle rear 8°, 550 mm long -Carriage design for easy attachment and removal of ramps -Continuous mud flap at the rear -1 pair of LC 10,000 daN lashing points in the middle of the cargo bed behind the gooseneck -7 pairs of LC 10,000 daN lashing points in the outer frame of the cargo bed -6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the cargo bed -1 pair of LC 10,000 daN lashing points in the center of the rear area of the cargo bed -1 pair of stanchion pocket strips approx. in the middle of the cargo bed -1 pair of stanchion pocket rails on the fixed part -1 pair of stanchion pocket rails behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wooden decking larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (disassembly) system Chassis: -axle make BPW ECO Max -2 ride heights -4 axles 10 t each (technically 12 t) -Twin tires 245/70 R17.5 -2 x rigid axle and 2 x friction-steered axle -Reverse steering lock on the friction-steered axle via reverse gear -Knorr brake system (in accordance with EU regulations with EBS-E) -TIM G2 from Knorr (trailer information module) -RSS (Roll Stability Support) driving stability control Load-dependent lift axle on the first axle incl. start-up aid (forced lowering of the lift axle possible via TIM) Accessories: -4 wheel chocks with holder 2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and plug-in position for rotating beacon, infinitely adjustable up to 3,950 mm -Fastening options on the gooseneck and on the loading area (alternatively on the ramp, if available) are included -pluggable bulkhead plate at the end of the excavator trough -Electro-hydraulic unit for ramp operation -Ramp operation via radio remote control -Hydraulic relief supports at the rear of the vehicle for support during the loading process -1 Pair of additional reversing lights rear switched to reverse gear -Wooden widening planks - larch (optional)

Condition: new, maximum load weight: 91,640 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full specification available upon request. Gooseneck * Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook couplings front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and a bolt coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Main beam height: approx. 430 mm, Main beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical bolt coupling for front connection of a low-bed, rear end traverse Hedpjuvbdtsfx Abuspa * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Front bogie tyres: 12 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Rear bogie tyres: 20 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) to ensure the best possible corrosion protection * Final coat with two layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL System 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU side walls and rear wall approx. 400 mm high in anodized finish, mountable on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication system for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication system for one 3-axle bogie * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the external tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * Steel mattresses can be positioned in 2 ways to achieve a lowered loading platform. Load capacity depends on extension, refer to the respective load chart * Steel mattresses with rubber flooring approx. 12 mm thick * One 7-pin socket left and right, front and rear of the rear bogie for warning signs * BEKA-MAX central lubrication system for one 5-axle bogie * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the goos

Condition: excellent (used), axle configuration: > 3 axles, first registration: 03/1991, total length: 17,550 mm, total width: 2,740 mm, suspension: hydraulics, tire size: 235 / 75 R17.5 | load index 143/141J, wheelbase: 1,360 mm, color: green, Year of construction: 1991, Colour: Green Payload capacity: 96,400 kg Manufacturer: Nooteboom Model: MCO-92VV Chassis number: L020053 Year of manufacture: 27/03/1991 Weights: Kingpin load: 26,400 kg Axle load: 12,100 kg Total axle load: 96,800 kg Gross vehicle weight (GVW): 123,200 kg Unladen weight: 26,800 kg Payload: 96,400 kg Axles: Axle make: BPW Hydraulic suspension All axles liftable Axle 1: friction steered Axles 2 & 3: rigid Axles 4-8: hydraulically steered Wabco brake system with ABS Tyres: 235/75 R17.5, load index 143/141J Dimensions: Total length: 17,550 mm Extension: 7,000 mm Max. extended length: 24,550 mm Loading platform width: 2,740 mm / 3,240 mm Hodpfeuu Hkisx Abuepa Height: 950 mm Wheelbase: 1,360 mm Additional information: Hatz Powerpack on gooseneck Lashing rings Stake pockets Outriggers for widening the loading platform Mechanical landing gear Spare wheel with holder Work lights Rear bumper with integrated lights 3.5" kingpin Central greasing system Cable remote control = Further Information = Axle configuration Tyre size: 235/75 R17.5 | load index 143/141J Axle make: BPW Suspension: hydraulic suspension Rear axle 1: twin tyres; lift axle; max. axle load: 12,100 kg; steered Rear axle 2: twin tyres; lift axle; max. axle load: 12,100 kg Rear axle 3: twin tyres; lift axle; max. axle load: 12,100 kg Rear axle 4: twin tyres; lift axle; max. axle load: 12,100 kg; steered Rear axle 5: twin tyres; lift axle; max. axle load: 12,100 kg; steered Rear axle 6: twin tyres; lift axle; max. axle load: 12,100 kg; steered Rear axle 7: twin tyres; lift axle; max. axle load: 12,100 kg; steered Rear axle 8: twin tyres; lift axle; max. axle load: 12,100 kg; steered Weights: Empty weight: 26,800 kg Payload: 96,400 kg Gross vehicle weight: 123,200 kg Functional: Loading platform height: 95 cm Extendable body: yes Condition: Technical condition: very good Visual condition: very good Financial Information: Price: On request Further Information: Please contact Stefan Schaapveld for more details.

Condition: new, functionality: fully functional, empty load weight: 12,000 kg, maximum load weight: 80,000 kg, overall weight: 92,000 kg, tire size: 245/70 R 17.5, Year of construction: 2025, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty New Lowbed Semi- Trailer. Lider Trailer for Heavy-Duty Trailers High-Quality and Durability Manufacturing Hpjdpfx Aou Unuhjbuoa EU Standards. EBS or Double Line Brake Systems. One-year Warranty for Manufacturing Defects. Customer Requested Colour.

Condition: new, empty load weight: 29,600 kg, maximum load weight: 72,400 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 6,650 mm, loading space width: 2,840 mm, loading space height: 550 mm, tire size: 285/70 R19.5, color: grey, operation weight: 29,600 kg, Equipment: ABS, Gooseneck: -Hydraulic gooseneck Raisable/lowerable and removable -Length approx. 3,650 mm Hpjdpswcmhaefx Abuoa -For tractor units: 6 x 4 or 8 x 4 2-axle chassis at the front: -Hook attachments at the front and rear -Chassis length x chassis width approx. 2,200 mm x 2,850 mm Excavator bridge "BB-A": -Telescopic excavator bridge "BB-A" with drive-over bridge hooks at the front and with bolt-and-link coupling at the rear -Length x base width approx. 6,650 mm x 2,850 mm -Beam height x beam width approx. 400 mm x 1,350 mm -Loading height 550 mm with ground clearance 150 mm 4-axle chassis at the rear: -Mechanical bolt-and-link coupling for attaching a low bed at the front, end cross member at the rear -Chassis length x Chassis width approx. 5,480 mm x 2,850 mm - Extensive lashing positions Pendulum axle and tires (front and rear chassis): - "Pendulum axle", all axles hydromechanically steered - Hose rupture valve on the axle compensation cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pins for securing in the raised position - Final axle paint finish with two coats of 2-component paint in MB 7350 Nova Gray - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tires 285/70 R19.5 Steering: - Front and rear steering can be operated via cable remote control using push buttons, with axle alignment control - Power socket for operating the steering system on the chassis Gooseneck -Cable remote control with pushbuttons including axle alignment control Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -Steel bulkhead, approx. 400 mm high -4 wheel chocks -3.5" kingpins -One 7-pin socket on the left and right rear of the gooseneck for the warning sign -Gallows with winch for spare wheel on the front of the gooseneck -Truck hydraulic connection with flow regulator (40 l/min), including a boom for suspending the supply lines. The tractor unit's tank must hold at least 80 liters with couplings -Aluminum side walls and rear wall that can be attached to the gooseneck, approx. 400 mm high, anodized -Control lever on the gooseneck protected by a hinged cover -A separate air connection with air gun on the gooseneck -Bekamax central lubrication system, 1x on the Gooseneck, 1x on the 2-axle chassis and 1x on the 4-axle chassis - Variomax tool kit - Multi-coupling hydraulic connections on the gooseneck and in the area of the low-loader hook attachment - 2 spare wheels - One 7-pin socket on the left and right, front and rear of the rear chassis for the warning sign - Front chassis with a separate air connection for pneumatic screwdrivers - Foldable extensions with steel mattresses, adjustable in width from approx. 2,850 mm to approx. 3,250 mm - The steel mattresses can be inserted in two positions to create a lowered loading area - Steel mattresses with rubber flooring, approx. 12 mm thick - Screw-in option (⌀ 40 mm) every approx. 500 mm outside on the upper chord of the outer tube of the excavator bridge for screw rings - One locking point every approx. 500 mm on the extension with mechanical locking Locking mechanism -A socket on the rear chassis for the cable remote control of the self-steering system -Two reversing lights on the rear panel -Four warning signs, approximately 423 x 423 mm, extendable by approximately 2,000 mm, with a position light -One work light, left and right, on the rear panel of the gooseneck with separate on/off switches -Two stainless steel tool boxes, approxim