Open semi-trailer

TecnoKar semirimorchio pianale trasporto lamiere

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: -Steel frame welded construction with front and rear frame offset and low bed without rear bevel -Frame neck + fifth wheel plate 225 mm -Low bed designed for point load 25 tonnes over 5 m -Outer frame closed on the outside with welded-in tie rings for lashing -Replaceable 2" king pin -Rear suspension rail for aluminium ramps Axles and tyres: -BPW low-loader axles, 10 tonnes axle load each, bellows diameter 360 mm -Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) -Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm -S-cam brake 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -IVTM tyre pressure monitoring -9 tyres 235/75 R 17.5, tubeless Steering: -1. and 2nd axle hydraulically forced-steered via fifth wheel coupling Gtedpfoiu Eu Nex Af Sou Floor: -Multi-layer glued plate floor with a thickness of 27 mm flush with the outer frame and longitudinal beams -Reinforced at the bottom with GRP coating -12 pairs of binding rings welded into the outer frame (8 pairs of RUD 8 ton - 6 pairs in the low bed and one pair each on the gooseneck and at the beginning of the rear unit - 2 pairs of 4 ton lashing rings each on the gooseneck and rear unit) -6 pairs of mushrooms in the outer frame in the low bed -Storage compartment with lid in the floor of the low bed at the front left and right Front wall: -25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding tarpaulins: -Sliding tarpaulins on both sides with welded vertical and horizontal straps (distance approx. 600 mm) and tension fasteners made of stainless steel -Adjustable tarpaulin straps (over dead center) up to loading width of 4,000 mm including tarpaulin extension with press studs and Velcro fastener -Tarpaulin extension in direction of travel: 300 mm, height: 750 mm -Incl. Eyelets for loose tarpaulin extension part -1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low bed at the front bend -With belt pockets Rear wall: -Steel rear portal frame with side tarpaulin attachment device -Aluminium double-wing door, 25 mm thick -Both door wings can be fully folded over with door stop -One aluminium double-joint hinge and two recessed grip recesses per door wing Corner pillars at the front: -At roof height, screwed on to the front Central pillars: -3 pairs of continuously adjustable folding pillars -The pillars can be moved along the entire length using a trolley -Central pillars in the low bed can also be fixed in the rear platform Roof: -EDSCHA sliding roof (galvanised) with crossbars that can be moved in both directions (pushed together towards the front in the loading space) -Rear portal crossbeam can be swung away -PVC tarpaulin roof without customs seal -Hand hydraulic lifting roof on both sides, lifting 450 mm -Lifting roof can be moved in the positions at the front (9x50) and rear (9x50) -Including tarpaulin extension and tarpaulin flap at the rear -Canopy at the very front of the bulkhead can be cranked out 900 mm each Accessories: -Extendable warning signs (removable at the front and rear with socket) including position lights up to a loading width of 4,000 mm -Storage of the 4 warning signs on the inside of the front wall, top right and left -1 aluminum ladder with bracket 2,500 mm long on the front wall -2 rows of aluminum slats attached in a self-locking manner -Sheet metal mudguard with mud flaps -1 night parking sign and 1 ADR

Condition: good (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 21,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 05/2009, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 285.70 r 19.5, color: red, Year of construction: 2009, Equipment: ABS, sem eichkorn 2 axle discs with hydraulic tridec steering, extendable from 13.80ma 21.35m, EXTE side posts seats for transporting wood \ logs, exte poles included, twist attachments for transporting 40ft containers, year 2009, side rud hooks, no. 4 aluminum tailboard sections, removable and openable 70cm high, ebs, vehicle already nationalized, CONCEASSIONARY INTERDRIVE SRL-PARMA Gjdpfx Aferum A Tj Setu

Condition: used, functionality: fully functional, empty load weight: 5,700 kg, maximum load weight: 32,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2004, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: dark red, Year of construction: 2004, Equipment: ABS, Sem acerbi viberti, 13.90m x 2.55m, 3 disc axles with 1st liftable and 3rd steerable, ebs, air suspension, twist x 40 and 45 ft. container housing, round posts seats 6 x side +2 rear and 2 front, year 2004, side winches in pairs, 3 steel 100cm chests, wood basket, overhauled until 31.07.2025-CONCESSIONARY INTERDRIVE SRL-PARMA Gtsdpeu Hy Exjfx Af Seu

Condition: good (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 07/2005, loading space length: 1,362 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, suspension: air, tire size: 385.65 r 22.5, color: blue, Year of construction: 2005, operation weight: 29,000 kg, Equipment: ABS, sem tecnokar lateral tipper from ferrous scrap iron, 3 disc axles with 1st liftable and 3rd steerable, tare about 80 q.li, year 2005, side hydraulic-moving pillars, inverted folding tailgate with manual stops, electric tipping impulse .CONCESSIONARY INTERDRIVE SRL-PARMA Gtsdsrrg Tcepfx Af Ssu

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 30,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2010, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.55 r 22.5, color: red, Year of construction: 2010, Equipment: ABS, sem tecnokar with coil hole, 3 disc axles with 1st liftable and 3rd steering, abs, air suspension, abs, n°6 pairs of side pillar seats + 6 central through seats + 5 front and rear seats, square tube, n°3 twist crosspieces for container accommodation of: 1 x 20 flush rear + 1 x 20 balanced + 1x30 flush, 100cm front head, stainless steel boxes, year 2010, INTERDRIVE SRL-PARMA DEALER Gtjdpfx Afjwg Hb Us Sou

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF Gtedowvzg Rjpfx Af Ssu - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: good (used), functionality: fully functional, empty load weight: 5,800 kg, maximum load weight: 31,000 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 07/1999, loading space length: 13,700 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 1999, Equipment: ABS, sem acerbi, open platform with 3 axles with 1st soill + 3rd steering, air suspension, abs, side uprights in round tubular, double speed feet, tool box, wood holder, side winches for fastening with straps, 60cm front head, platform in wooden strips, year 1999, inspected until 07.31.2025 - INTERDRIVE SRL DEALER - PARMA Gedpfx Afewl Anno Sotu

Condition: used, functionality: fully functional, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 09/2026, loading space length: 13,550 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R 22,5, color: grey, Year of construction: 2018, Equipment: ABS, Disc brakes, 1st lift axle, 3rd steering axle, sliding bulkhead, 21-slat hydraulic Cargo Floor moving floor, new manual cover, ladder and accessories Gedpfx Aoxb Exrsf Sotu

Condition: new, empty load weight: 6,840 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, total length: 13,620 mm, total width: 2,480 mm, total height: 2,700 mm, suspension: air, load capacity: 31,160 kg, PVC tool box Double POLYWOOD floor 28+9mm Semi-LED lights Sliding roof Spare wheel holder Height under rail from 2700 to 2900mm Height adjustable mm Elevation 0mm for loading and unloading Gtjdpfxex E Uv Re Af Sju 13 lashing rings per side Tension cable 600mm aluminium sideboards Internal length 13.62m Coupling height 1150mm

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 750 mm, Year of construction: 2024, Equipment: ABS, ( sample pictures ) SADDLE CONSTRUCTION KRONE TRIDEC 3-axle SDP 27/eLNZ4-BS / 750 mm BW /TRIDEC make/manufacturer : KRONE EZL : NEW VEHICLE dimensions : 13620 x 2480 x 750 gross vehicle weight : 36000 kg empty weight : 7019 kg air suspension lift/lower, disc brakes, spare wheel holder, ABS, EBS, axle make : BPW ECO PLUS ver. 3 lift axle, screen-printed floor, tie-down rings, toolbox, exterior paint finish : black KTL, body paint finish : white chassis paint : black KTL, tires: 6-ply, tire condition : 100 %, tires HA 385 /55 R 22.5 4 pairs of 750 mm high drop sides CONSTRUCTION PANELS with 29 x stake pockets 81 x 81 Gtjdou S Tzhjpfx Af Sou in the center and in the outer frame + 12 steel stanchions on the left of the frame 12 pairs of reinforced lashing holes a 4 to 12 pairs of multi lash lashing rings multillock outer frame ( usable with closed bw ) steel bulkhead 1600 mm high reinforced version LIFTACHSE fully automatic 15 + 2 x 7 pole front socket toolbox / e wheel holder BPW ECO PLUS VERSION 3 !!!!! TRIDEC FORCED STEERING ( rod and 2 x turntable ) comes to every construction site wheelbase 1310 /2050 mm all information without warranty , subject to prior sale !!! if you have any questions for this or other vehicles please call us . if you have any questions for this or an other trailer / car please call us .