Chain excavator

LIEBHERR R926 LC, Hydr. S.W.S., Greifer, Klima, Kamera

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: Bwjdoh Etf Repfx Adush -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear bevel of approx. 1,000 mm x 8° -5 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Removable two-part ramps: -A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Seat posts: -JOST fifth wheels (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, two axles rigid two axles self-steering, air-suspended, with drum brake, with lifting/lowering function The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -axle tool -235/75 R 17.5 tires Brake system: -brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Coating: -First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Electrical system: -Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Accessories included: -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -One spare wheel with holder in front of the bulkhead -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon -Cover plates to bridge the gap between ramps and cargo bed -White reflector tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for one 20ft, 2x 20ft or one 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Lift axle on the front axle with controls -Square climbing rails 20 x 20 mm -BEKAMAX central lubrication system -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm

Condition: used, Year of construction: 2023, operating hours: 500 h, Equipment: all wheel drive, Manufacturer: Hitachi Type: ZX155W-7 Machine-No.: HCMLBS5ZP00200289 Bwedeu Uxpispfx Aduoh Equipment: Basic machine, 20 km/h version, Levelling/support blade rear, cplt piped, Tires: Caliber twin tires 315/70 R22.5, 2520 mm long stick, documents: Data confirmation

Condition: used, Year of construction: 2024, operating hours: 39 h, Internal vehicle number: VTC10037 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The excavator is brand new and has never been used! Demonstration model! Bjdpfxjwvyhgo Aduswh Weight: 18.4 tonnes MB-Boom Transport length: 7.64 m Transport width: 2.54 m Transport height: 3.15 m Maximum reach: 7.98 m Digging depth: 4.61 m Breakout force: 108.5 kN Travel speed: 35 km/h EW model series Engine manufacturer: Volvo Engine type: D 4 J Engine power: 102 kW Displacement: 4.04 l Rated speed at maximum torque: 2000 rpm Maximum torque: 605/1500 Nm Number of cylinders: 4 Bore x stroke: 101x126 mm Emission standard: Stage V ENCONG EC319-S60 Tiltrotator Financing example: * Internal number: VTC * Purchase price: €207,900.00 * Down payment: 10% * Term: 60 months * Monthly payment: €3,256.21 * Residual value: €41,580.00 If you are interested in this offer or if you would like it adjusted to your requirements, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle in part exchange. In-house financing available. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm Bwodpfjk Aht Uex Adush -Rear gooseneck with bevel approx. 1,000 mm x 10° Loading area: -Loading area in extendable design, length approx. 8,800 mm, with bevel at the rear approx. 500 mm x 10° -One recess protruding into the loading surface and into the chamfer to accommodate the excavator dipper arm -Pneumatic locking with conical locking pins and reinforced locking positions -Hardwood covering on the bevel of the loading area Ramps: -1 Pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm -Ramps with hardwood decking -Hydraulically folding ramp tips -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -Square climbing ledges 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and suspension: -BPW axles and suspension, 1st axle with preload steering, all other axles with forced hydromechanical steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -235/75 R 17.5 twin tires -TPMS tire monitoring system in accordance with ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheels Accessories included: -steel front wall, pluggable, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Parking position on the gooseneck for the warning signs when not in use -1 Spare wheel -On the gooseneck 1 pair of plug-in ALU side panels, approx. 400 mm high, anodized -One plug-in ALU rear panel on the gooseneck, approx. 400 mm high, anodized -Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin -2" kingpin -Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide -4 wheel chocks -Mechanical seat posts with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -1 Intermediate table, approx. 300 mm wide -Widenings (galvanized) extendable by approx. 230 mm per side -Wheel recesses with square climbing rails -ALU covers for the wheel recesses -1 pair of mechanical rear supports -Steering can be operated from the front and rear by cable remote control, with tracking control of the axles -1st axle with automatic lift axle function -Central lubrication system with 1 pump, BEKAMAX brand -Radio remote control for operating the self-steering, in addition to the cable remote control, with 2 indicator lights on the receiver as toe-in control -Wabco Smart Board System -4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Condition: new, Year of construction: 2025, Equipment: all wheel drive, DEVELON DX 140 LCR-7 Short-Tail Track Excavator > Stock Machine > Year of Manufacture 2025 > 16,500 kg Net Weight Bsdpfxowi A H Ss Aduowh > Water-cooled 4-cylinder DEVELON diesel engine with 117 hp > Outrigger Blade > Adjustable Boom > Side and Rear View Camera > DAB+ Radio with Speaker > 600 mm Triple Grouser Track Shoes with Bolt-On Pads> 2 x Proportional Auxiliary Hydraulics> Hammer Line> Air-Suspended Driver's Seat with Heated and Cooled Seats > AC Air Conditioning> Refueling Pump > Full LED Work Lighting > Rotating Beacon > Power Tilt with Oilquick OQ 65 Quick Coupler with Load Hook 1 x 2,000 mm Hydraulically Pivoting Trench Cleaning Bucket 1 x 1,200 mm Backhoe Bucket with Cutting Edges > Available Immediately Transport? No Problem!

Condition: used, Year of construction: 2014, operating hours: 10,408 h, Equipment: all wheel drive, Serial number: WLHZ1178LZK073110 Operating weight: 19,000 kg Year of manufacture: 2014 – Operating hours: approx. 10,408 h Automatic climate control Heated seat Radio-CD Bedpsi A Tm Njfx Adujwh Rear area monitoring with camera Machine width: approx. 2,750 mm Quick coupler OilQuick OQ65 Adjustable boom 3,600 mm Dipper stick 2,450 mm Central lubrication system Specifications, prior sale, and errors are expressly subject to change. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The decisive description is that stated in the purchase contract. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide a quote from our partner workshops! The vehicle may feature promotional stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, Year of construction: 2018, operating hours: 5,628 h, Equipment: all wheel drive, Serial number: 161 W 301582 Adjustable boom Permissible total weight: 18,000 kg Operating hours: 5,628 h Automatic climate control Heated seat Rear and side monitoring with camera Radio-USB/Bluetooth ----Dozer blade support: 2,540 mm wide Hydraulic quick coupler OilQuick 60/45 Dipper stick 2,650 mm AdBlue Central lubrication system Attachments: NONE Bwsdpfx Aexhagksdujh Changes, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract is binding. Our offer generally does not include new TÜV inspection. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops! The vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: good (used), fuel type: diesel, Year of construction: 2020, operating hours: 3,345 h, Equipment: air conditioning, = Additional Options and Equipment = - AdBlue - Boom with hose rupture valve -> Safety hose rupture valve - boom/winch - Battery disconnect switch - Slope hydraulics - Rubber tracks - Hammer/shear hydraulics - Hammer hydraulics - Shear hydraulics - Quick coupler = Remarks = Monoboom 5.2 m, Dipper arm 3.0 m, Engine Tier V, Dozer blade, Heated and air-suspended seat, A/C, Rear view and right side camera, Rain cover, Bsdpfeuu Awfsx Aduowh LED work lights, Cyclone air pre-filter, Hammer/shear hydraulics X1, Grab hydraulics X3, Quick coupler hydraulics, Fuel pump 35 l/min, Radio, USB, MP3, Bluetooth, Hose rupture valves, Care Track, Counterweight 3.2 t, 600 mm 3-grouser track pads with rubber pads, Fully hydraulic quick coupler OilQuick OQ70/55. Bucket available on request. Monoboom 5.2 m, dipper arm 3.0 m, Engine emissions Stage V (EU compliant design), dozer blade on undercarriage incl. foldable step, heated driver’s seat, adjustable and air-suspended, air conditioning, refueling pump 35 l/min, cyclone pre-separator air filter, radio with MP3 and USB incl. Bluetooth hands-free system, rain canopy, extra work lights on the cab front, rearview camera, side camera (view via display), P mode, Care Track, return filter for hammer/shear hydraulics, electric foot pedal for H/S hydraulics proportional control, quick coupler hydraulics, grab hydraulics, slope and grab rotation hydraulics (60 lpm), hose rupture valves, LED work lighting, hammer/shear hydraulics with 2 pumps (double-acting), proportional pressure adjustment for management system for 18 different pressures, counterweight 3,200 kg, 600 mm 3-grouser pads with rubber pads, fully hydraulic quick coupler OilQuick OQ70/55. Without attachments. = Additional Information = Technical Information Track width: 60 cm AdBlue system: Yes Unladen weight: 19,270 kg Functional CE marking: yes Maintenance, History and Condition Number of owners: 1 Technical condition: good Optical condition: good Identification Serial number: 323089 More Information Backhoe/bucket arm length: 300 cm Emissions level: Stage V / Tier IV final Terms of delivery: EXW Transport dimensions (L x W x H): 8.7 x 2.8 x 3.02 m Further information Please contact Bernd Strack for further information.