Low loader

KÄSSBOHRER Tieflader mit hydr. Schwanenhals

Overall weight: 48,000 kg, maximum load weight: 36,937 kg, axe configuration: 3 axles, first registration: 10/2023, Condition: used, total width: 2,550 mm, Equipment: ABS, Kässbohrer low loader with hydr. gooseneck TECHNICAL DATA: * Semi-mounted height 1,250 mm * Outer length 13,190 mm * Gooseneck length 3,950 mm * Platform length 9,240 mm * Platform height 875 mm * Wheelbase 8,480 mm * Wheelbase 1,360 mm * Axle load 30,000 kg * BPW axles with air suspension and drum brakes, 10 tons load capacity * Unladen weight 11,063 kg * Overall width 2,550 mm * Permissible gross weight (60 km/h) 52,800 kg * Permissible gross vehicle weight (80 km/h) 48,000 kg CHASSIS: * 2x rigid axles at the front, 1x self-steering axle at the rear * Overload-dependent manual axle lift system on the 1st axle * 12-ply 245/70R17.5 tires * Air suspension, 1x load pressure gauge CHASSIS: Made of high-quality and high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost supports at the front * Folding rear supports * Grid floor RAMP: * Drive-on ramp capacity 40 tons * 2x hydraulic ramps, suitable for hydraulic sliding/folding operations with galvanized steel surface, 4,200 mm long and 850 mm wide, 9 degree ramp angle, load capacity 40,000 kg and 3,510 mm high in closed position * Hydraulic gooseneck ramp 2,800 mm long 10° angle LOAD SECURING: * Lashing rings 6x2 on the gooseneck with 6 tons capacity, 6x2 on the platform with 6 tons capacity, 8x2 on the outer frame with 6 tons capacity * 8x2 stanchion pockets MISCELLANEOUS: Bsb9Yxhxfys * 1x rotating beacon * 1x work light * 2x2 extra-wide boards with lighting * SmartBoard For further information please do not hesitate to contact us

Overall weight: 58,000 kg, maximum load weight: 44,710 kg, axe configuration: > 3 axles, loading space length: 13,200 mm, loading space width: 2,550 mm, loading space height: 900 mm, first registration: 04/2023, Condition: used, total width: 2,550 mm, Equipment: ABS, Kässbohrer SLA R 4 extendable low loader with wheel recesses * Semi-mounted height 1,250 mm * Platform length 9,240 mm * Extension 3,500 mm * Platform height 875 mm * BPW axles with drum brakes * Unladen weight 13,290 kg * Total width 2,550 mm + 600 mm side extensions * 2 x rigid axles at the front, 2 x trailing axles at the rear * Overload-dependent manual axle lift system on the 1st axle * Tires 245/70 R17.5 C9Xtgmg79 * Air suspension, 1 x load pressure gauge included * 45 mm thick hardwood floor * Wheel recess for loading vehicles with tires * Lashing rings, container locks 1x20 FT or 1x30 FT, stanchion pockets, * Tool box * Overwidth panels with lighting The vehicle is as good as new. It has not yet been loaded! For further information please do not hesitate to contact us

Axe configuration: 3 axles, Condition: new, total width: 2,550 mm, Equipment: ABS, Availability: Approx. 3-4 months after receipt of order Kässbohrer SLS HS3 3 - axle low loader rigid/non-extendable NEW VEHICLE Axles / brake system: # BPW axles with drum brake 17.5" # 3rd axle as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x brand tires 245 / 70 / 17.5" on steel rims Low loader: # fifth wheel height: 1250 mm # Lowbed length: 9,240 mm # 8 x 2 lashing eyelets 6to in the outer frame # 6 x 2 lashing eyelets 6to in the neck # 6 x 2 lashing eyelets 6to on the drop deck # Overwidth brackets 300 mm extendable # Galvanized grating floor # Color: RAL 3020 traffic red # PARTIALLY METALLIZED Mm0Kv3F Drive-on ramps: # hydraulically adjustable ramps with galvanized grating floor # 4,200 mm long x 850 mm wide x 9° drive-on angle # 2kW electro-hydraulic pump # NATO socket for operating the electro-hydraulics incl. cable Gooseneck ramp # 2,800 mm long x 2,550 mm wide x 10° drive-up angle # 2 x box for accessories under the gooseneck ramp Miscellaneous: # 4 x overwidth signs with holder for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full front stabilizers # galvanized manual rear support # 2 inch kingpin # 24V lighting system Aspöck # E-wheel holder with spare wheel ---- Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Overall weight: 39,000 kg, maximum load weight: 26,827 kg, axe configuration: 3 axles, loading space length: 16,240 mm, Year of construction: 2023, Condition: new, total width: 2,550 mm, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo low-loader with wheel recesses and excavator stick recess TECHNICAL DATA: * Semi-mounted height (H5) *950 mm * Rear swing door 2,300 mm * Outer length (L) 13,190 mm * Gooseneck length (Gl) 3,950 mm * Platform length (Pl) 9,240 mm * Extension (Pe) 3,500 mm * Locking position 500 mm * Platform height (Ph) 770 mm * Wheelbase (Wb) 7,800 mm * Axle spacing (A) 2,260 mm * Axle load 24,000 kg * Axles 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load 8 tons load capacity * Kingpin capacity *15,000 kg * Unladen weight ±%3 12,173 kg * Total width (W) 2,550 mm + 600 mm (w / side extensions) * Sliding platform Not included * Total weight *(80 km/s) 39,000 kg * Total weight *(60 km/s) 42,900 kg CHASSIS: * Number of axles 3 pieces * Steering type 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle *Overload-dependent manual axle lift system on the 1st axle * Manual lift axle control * Wabco brake system * 12-ply 205/65 R17.5 tires * 1 x spare wheel holder on the bulkhead * Air suspension, 1 x load pressure gauge included, which displays the pressure on the axle axle beam * NATO socket CHASSIS: * S700 MC * Gooseneck with 90° vertical corners * 30 mm thick hardwood floor * Galvanized extensions 8 x 2 to extend the platform width up to 300 mm * Jost supports 50 tons * Folding rear supports 45 tons * 2 pairs of wheel recesses for loading vehicles with tires * Tire trough bridge to cover the wheel troughs RAMP: * Drive-on ramp capacity * 40 tons * Suitable for hydraulic folding and switching operations * 30 mm thick hardwood floor, a length of 3,070 mm, a width of 850 mm, a height of 3,715 mm in closed position, a ramp angle of 14 ° and a capacity of 40 tons * Rear ramp protection *Ramp protection tensioning chain is included. LOAD SECURING: * Lashing rings 2 x 2 x 5000 daN load capacity, 1 x 2 x 10000 daN load capacity load rings on the gooseneck, 3 x 2 x 5000 daN, 4 x 2 x 10000 daN load rings on the outer platform, 2 x 2 load rings with a capacity of 8000 daN under the outer frame, 4 x 2 load rings with a capacity of 6000 daN on the basin area are included. * Stake pockets 5 x 2 stake pockets measuring 52 mm x 102 mm are included. * 6 x container lock housings and 4 x twistlock container locks are included for the *transport of 1 x 20 FT or 1 x 30 FT containers * Gooseneck panels 1 x steel front wall panel measuring 450 mm x 2,550 mm, 2 x aluminum side walls measuring 360 mm x 1,500 mm 1 x aluminum rear wall measuring 360 mm x 2,550 mm * stanchions *8 x 2 Adet 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (with individual lid) measuring 750 x 400 x 360 mm (H x D x W). * 1 x rotating beacon * 1 x work light on the underride guard Becfposx00I * Oversize panels with LED lighting 2 x 2 pieces 423 mm. x 423 mm. * Storage box on the gooseneck (600 mm x 830 mm x 2,310 mm) * Wooden planks for overwidth transport * Color of the chassis RAL 3020 traffic red For further information please do not hesitate to contact us

Overall weight: 39,000 kg, maximum load weight: 26,827 kg, axe configuration: 3 axles, loading space length: 16,240 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo low-loader with wheel recesses and excavator trough Immediately available TECHNICAL DATA: * Semi-mounted height (H5) *950 mm * Rear swing door 2,300 mm * Outer length (L) 13,190 mm * Gooseneck length (Gl) 3,950 mm * Platform length (Pl) 9,240 mm * Extension (Pe) 3,500 mm * Locking position 500 mm * Platform height (Ph) 770 mm * Wheelbase (Wb) 7,800 mm * Axle spacing (A) 2,260 mm * Axle load 24,000 kg * Axles 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load 8 tons load capacity * Kingpin capacity *15,000 kg * Unladen weight ±%3 12,173 kg * Total width (W) 2,550 mm + 600 mm (w / side extensions) * Sliding platform Not included * Total weight *(80 km/s) 39,000 kg * Total weight *(60 km/s) 42,900 kg CHASSIS: * Number of axles 3 pieces * Steering type 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle *Overload-dependent manual axle lift system on the 1st axle * Manual lift axle control * Wabco brake system * 12-ply 205/65 R17.5 tires * 1 x spare wheel holder on the bulkhead * Air suspension, 1 x load pressure gauge included, which displays the pressure on the axle axle beam * NATO socket CHASSIS: * S700 MC * Gooseneck with 90° vertical corners * 45 mm thick hardwood floor and steel floor with drop structure only above the wheels * Galvanized extensions 8 x 2 to extend the platform width up to 300 mm * Jost supports 50 tons * Folding rear supports 45 tons * 2 pairs of wheel recesses for loading vehicles with tires * Tire trough bridge to cover the wheel troughs RAMP: * Drive-on ramp capacity * 40 tons * Suitable for hydraulic folding and switching operations * Wooden floor with a thickness of 40 mm, a length of 3,070 mm, a width of 850 mm, a height of 3,715 mm in closed position, a ramp angle of 14° and a capacity of 40 tons * Rear ramp protection *Ramp protection tensioning chain is included. LOAD SECURING: * Lashing rings 2 x 2 x 5000 daN load capacity, 1 x 2 x 10000 daN load capacity load rings on the gooseneck, 3 x 2 x 5000 daN, 4 x 2 x 10000 daN load rings on the outer platform, 2 x 2 load rings with a capacity of 8000 daN under the outer frame, 4 x 2 load rings with a capacity of 6000 daN on the basin area are included. * Stake pockets 5 x 2 stake pockets measuring 52 mm x 102 mm are included. * 6 x container lock housings and 4 x twistlock container locks are included for the *transport of 1 x 20 FT or 1 x 30 FT containers * Gooseneck panels 1 x steel front wall panel measuring 450 mm x 2,550 mm, 2 x aluminum side walls measuring 360 mm x 1,500 mm 1 x aluminum rear wall measuring 360 mm x 2,550 mm Imgtun0H2 * stanchions *8 x 2 Adet 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (with individual lid) measuring 750 x 400 x 360 mm (H x D x W). * 1 x rotating beacon * 1 x work light on the underride guard * Oversize panels with LED lighting 2 x 2 pieces 423 mm. x 423 mm. * Storage box on the gooseneck (600 mm x 830 mm x 2,310 mm) * Wooden planks for overwidth transport * Color of the chassis RAL 3020 traffic red For further information please do not hesitate to contact us

Overall weight: 58,000 kg, maximum load weight: 44,380 kg, axe configuration: 3 axles, loading space length: 19,190 mm, loading space width: 3,000 mm, first registration: 07/2019, Condition: used, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, Kaessbohrer LB4E Semie Tieflader Erstzulassung:12-07-2019 BPW Eco Plus axles 1x Lift axle 2 Lowest axles rear axle Drum brakes ABS/EBS Reifen:245/70 R17,5 4x35%, 8x45%,4x60% Luftfederung Totalgewicht:58,000 Kg, Leergewicht:13,620 Kg. Nutzlast:44,380 Kg. Schwanenhalslänge:3.95 Mtr. Tiefbetlänge:9.24 Mtr + 6.00 Mtr. Ausziehbar Total bed length: 15.24 mtr. Breidte:2.55 Mtr.+2x30 Cm. Ladefluhthöhe:89 Cm. Hydraulic ramps 2 Stutzen Hinten Zurösen 24 Volt Powerpack Zwecks Hydro Fuer Rampen Irrtümer / Schreibfehler und Zwischenverkauf Vorbehalten Dqmwhv

Overall weight: 42,000 kg, maximum load weight: 29,260 kg, axe configuration: 3 axles, Condition: new, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Technical data: Model and manufacturer*Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable tire trough low bed semi-trailer, suitable for transporting vehicles and heavy machinery. Dimensions*Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Total width: 2,550 mm (can be extended by 600 mm using side extensions) * Height of fifth wheel: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle distance: 2,260 mm Weights and load capacities* Permissible gross weight: * 52,800 kg at 60 km/h Cff9G3Cdom * 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Load capacity of the axles: 30,000 kg (10 tons per axle) * Kingpin capacity: 18,000 kg Axle equipment* Number of axles: 3 (2 rigid at the front, 1 trailing axle at the rear) * Lift axle: Manual overload-dependent (1st axle) * Axle material: BPW axles with drum brakes Tires and rims*Tire size: 245/70 R17.5 * Tire brand: GOODYEAR * Tire markings: M+S label and 3PMSF marking * Tire pressure monitoring system: Increases fuel efficiency and extends tire life * Number of rims: 12 pieces (steel rims with offset ET120) Chassis and suspension*Suspension: Air suspension with load pressure gauge * Brake system: WABCO dual-circuit air brakes, EBS 4S/3M with ABS and RSS (tilt angle control) Lighting and electrics*Lighting system: 24V, multi-chamber lights from ASPÖCK, LED side markers and rear lights * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² intermediate cable (3 m long) Ramps*Ramp type: Folding hydraulic ramps with sliding mechanism * Capacity: 40 tons * Ramp floor: Made of hardwood * Fuses: Ramp protection tensioning chain included Load securing * Lashing rings: * 2 x 2 with a load capacity of 5,000 daN each * 1 x 2 with 10,000 daN load capacity on the gooseneck * 4 x 2 lashing rings with 6,000 daN capacity in the basin area * Container lock housing: suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stanchions: 5 x 2 stanchions (50 mm x 100 mm) Special features* Gooseneck: With 90° vertical corners, stable and durable * Floor covering: 45 mm thick hardwood floor and steel floor with drop structure * Tire trough bridge: Bridges made from sectional hardwoods with sheet metal supports to cover the wheel wells * Tool box: PVC-coated steel, dimensions 750 x 400 x 360 mm Colors*Chassis: Traffic red (RAL 3020) Condition: New and ready for immediate use. * Perfectly suited for heavy-duty transportation and use in the construction industry or machine relocation.

Overall weight: 24,000 kg, maximum load weight: 16,000 kg, axe configuration: 3 axles, first registration: 02/1989, Condition: used, 3 axle Kässbohrer low loader from Bundeswehr ownership very good condition always regularly maintained. good condition tires ca 90% 1x spare wheel VAT 19% showable On request TÜV new.----Tel: Dps9Ph E-Mail: josef. Location: 97778 Fellen/Rengersbrunn

Overall weight: 13,500 kg, maximum load weight: 8,500 kg, axe configuration: 1 axle, loading space length: 9,900 mm, loading space width: 2,400 mm, loading space height: 2,900 mm, first registration: 10/1983, Condition: used, total width: 2,500 mm, total height: 3,900 mm, * Kässbohrer 1-axle box trailer for 4 horses or 3 carriages with living compartment & lockers * 1 large flap at the rear - 1 large flap on the side - 1 small entrance door at the front plus storage compartment * Approval as a semi-trailer for animals for sporting purposes - horse transporter * Length loading area : 9,900 mm - Overall length : 10,520 mm * Width loading area : 2,400 mm - Overall width : 2,500 mm * Interior height : approx. 2,900 mm - Overall height : 3,900 mm * Permissible total weight : 8,770 kg - Unladen weight : 3,750 kg - Payload : 5,020 kg * Technically in order - trailer is tight and dry - visually something should also be done * German vehicle - German vehicle registration document * For viewing please make an appointment * Contact person : Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. Dpodnp * Subject to alterations, errors and prior sale

Overall weight: 18,000 kg, maximum load weight: 9,370 kg, axe configuration: 2 axles, first registration: 05/1994, Condition: used, Equipment: ABS, * 4832- Vehicle ID for telephone inquiries * Type: V 14 GL * drum brakes, adjust. Drawbar, 40 eyelet, twin tires, air suspension lift + lower, aluminum ribbed floor * Finkel superstructure, power generator, hydr. floor, hydr. loading ramp * Loading area: 1st floor: 16.90 m², 3rd floor: 16.65 m², 3rd floor: 16.45 m² * Usable loading height: 3x 0.95 m * Tires: 265/70R19.5 * 1A: 13/ 13 /9 / 9 mm * 2A: 9 /9 / 9 / 10 mm * Saddle height: 0.78 m ----our e-mail address: Mflfk3Kmpj our service for you: - Procurement of short-term or customs license plates - Transfer / delivery EU-wide - Customs clearance of vehicles to third countries Yesli u vas yest' voprosy na russkom yazyke, vy mozhete pozvonit' po sleduyushchemu nomeru * WhatsApp just for russian speakers: * Whatsapp for english, german and other languages:

Axe configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, Condition: new, Equipment: ABS, Availability: approx. 4 months after receipt of order Kässbohrer 3 - axle low loader wheel recesses extendable / extandable NEW VEHICLE Axles / brake system: # BPW axles with 17.5" drum brakes # 3rd axle as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x Continental HTR 2 245 / 70 / 17.5" on steel rims Low loader: # Semi-mounted height: 1,250 mm # Lowbed length: 9,240 mm + 3,500 mm extendable # 9 x 2 lashing eyelets 6to in the outer frame # 2 x 2 lashing eyelets 6to in the neck # 4 x 2 lashing eyelets 6to on the drop deck # Overwidth brackets 300 mm extendable # Hardwood floor 45 mm # Color: MB 7350 nova grey or RAL 3020 traffic red # Excavator trough Drive-on ramps: # hydraulically movable ramps with 40 mm hardwood floor # 4,200 mm long x 850 mm wide x 11° ramp angle # 2kW electro-hydraulic pump # NATO socket for operating the electro-hydraulics incl. cable Miscellaneous: # 4 x overwidth signs with holder for rotating beacon # 1 x toolbox on the right in the direction of travel # JOST full front stabilizers # galvanized manual rear support # 2 inch kingpin # 24V lighting system Aspöck # E-wheel holder with spare wheel ---- Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in 47574 Goch / Germany. 7Medx3S

Overall weight: 48,000 kg, maximum load weight: 39,220 kg, axe configuration: 3 axles, loading space length: 13,250 mm, loading space width: 3,000 mm, first registration: 08/2021, Condition: used, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, Kaessbohrer LB3E Semie Tieflader Erstzulassung:10-08-2021 BPW Eco Plus Axles 1x Lift / Lenck Achse Drum brakes with ABS and EBS Luftfederung Tyres:245/70 R17.5 Approx 40%. Totalgewicht:48,000 Kg,Leergewicht:8,780 Kg.,Nutzlast:39,220 Kg. Schwanenhals Länge:3.95 Mtr. Tiefbetlänge:9.30 Mtr. Breidte:2.55 Mtr.+2x30 Cm. Ladefluhrhöhe:90 Cm. Hydraulic ramps:390 Cm. Ramps also adjustable sideways 24 Volt Powerpack Stutzen Hinten Zurösen Rungentaschen Irrtümer / Schreibfehler und Zwischenverkauf Vorbehalten 3Hraclp

Overall weight: 42,000 kg, maximum load weight: 29,260 kg, axe configuration: 3 axles, Condition: new, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Technical data: Model and manufacturer Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable tire trough low bed semi-trailer, suitable for transporting vehicles and heavy machinery. Overall length dimensions: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Total width: 2,550 mm (can be extended by 600 mm using side extensions) * Height of fifth wheel: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle distance: 2,260 mm Weights and load capacities Permissible gross weight: * 52,800 kg at 60 km/h * 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Load capacity of the axles: 30,000 kg (10 tons per axle) * Kingpin capacity: 18,000 kg Axle equipment Number of axles: 3 (2 rigid at the front, 1 trailing axle at the rear) * Lift axle: Manual overload-dependent (1st axle) * Axle material: BPW axles with drum brakes Tires and rims Tire size: 245/70 R17.5 * Tire brand: GOODYEAR * Tire markings: M+S label and 3PMSF marking * Tire pressure monitoring system: Increases fuel efficiency and extends tire life * Number of rims: 12 pieces (steel rims with offset ET120) Chassis and suspension Suspension: Air suspension with load pressure gauge * Brake system: Dual-circuit air brakes from WABCO, EBS 4S/3M with ABS and RSS (tilt angle control) Lighting and electrics Lighting system: 24V, multi-chamber lights from ASPÖCK, side markers and rear lights in LED * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² intermediate cable (3 m long) Ramps Ramp type: Folding hydraulic ramps with sliding mechanism * Capacity: 40 tons * Ramp floor: Made of hardwood * Fuses: Ramp protection tensioning chain included Dqjyw2 Load securing lashing rings: * 2 x 2 with a load capacity of 5,000 daN each * 1 x 2 with 10,000 daN load capacity on the gooseneck * 4 x 2 lashing rings with 6,000 daN capacity in the basin area * Container lock housing: suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stanchions: 5 x 2 stanchions (50 mm x 100 mm) Special features Gooseneck: With 90° vertical corners, stable and durable * Floor covering: 45 mm thick hardwood floor and steel floor with drop structure * Tire trough bridge: Bridges made from sectional hardwoods with sheet metal supports to cover the wheel wells * Tool box: PVC-coated steel, dimensions 750 x 400 x 360 mm Chassis colors: Traffic red (RAL 3020) Condition: New and ready for immediate use. * Perfectly suited for heavy-duty transportation and use in the construction industry or machine relocation.

Overall weight: 8,750 kg, empty load weight: 1,200 kg, maximum load weight: 7,550 kg, axe configuration: 1 axle, first registration: 06/1981, suspension: air, color: red, tire size: 8.25x15, Year of construction: 1981, Condition: used, Offer Kässbohrer E3-10 mini semitrailer with ramps and cable winch Hydraulic ramps and cable winch. Both can be operated by hydraulics from the towing vehicle or by electric hydraulic pump in the trailer. Currently Russian papers. Semi-trailer will be refurbished and sold with new Tüv and German papers. If you are interested in buying, special requests can still be realized. Year of construction 1981 GVW 8750 KG Empty weight 1200 KG Payload 7550 KG Tires 8.25X15 Width: 2.45 m Length: 7.60 m Loading height: 1.15 m Yvjmtk Semi-mounted height: approx. 1.00 m _____ Financing possible via our partner banks. Trade-in of truck trailer construction machinery or similar possible. Germany-wide transportation possible for an additional charge. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer! Vehicle can be covered with advertising and/or lettering. The sale to traders takes place in the condition as seen without subsequent notification of defects, excluding any warranty or guarantee ex works Salzgitter. Our service for you: - Procurement of short-term or customs license plates - Transfer / delivery nationwide - Customs clearance of vehicles to third countries Our vehicle description serves only for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The information does not claim to be complete. The information and descriptions as well as pictures are non-binding and do not serve as guaranteed characteristics. The seller accepts no liability or warranty for typing or data transmission errors. Equipment may have to be checked separately. Subject to alterations and prior sale.

Axe configuration: 3 axles, Condition: new, Equipment: ABS, Availability: approx. 4 months after receipt of order! Kässbohrer 3 - axle low loader rigid / not extendable NEW VEHICLE Axles / brake system: # BPW axles with 17.5" drum brakes # 3rd axle as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x brand tires 245 / 70 / 17.5" on steel rims Low loader: # fifth wheel height: 1250 mm # Lowbed length: 9,240 mm # 7 x 2 stake pockets 52 x 102 mm # Gooseneck lashing eyes: 1 x 2 10to, 2 x 2 5to # Lashing eyes rear platform: 3 x 2 10to, 4 x 2 5to # Overwidth brackets 300 mm extendable # Hardwood floor 45 mm # Color: RAL 3020 traffic red Drive-on ramps: # hydraulically adjustable ramps with 40 mm hardwood floor # 4,200 mm long x 850 mm wide x 9° drive-on angle # 2 kW electro-hydraulic pump # NATO socket for operating the electro-hydraulics incl. cable Miscellaneous: # 4 x overwidth signs with holder for rotating beacon # 1 x tool box on the right in the direction of travel Qbedz # JOST full front stabilizers # manual rear support galvanized # 2 inch kingpin + 2nd position for kingpin # 24V lighting system Aspöck # E-wheel holder with spare wheel

Overall weight: 48,000 kg, maximum load weight: 37,581 kg, axe configuration: 3 axles, loading space length: 15,850 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm Sqwq0Jum RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Axe configuration: > 3 axles, loading space length: 13,190 mm, Condition: new, total width: 2,550 mm, Equipment: ABS, Delivery time: approx. 5 months after receipt of order Kässbohrer 4 - axle low loader extendable / extendable NEW VEHICLE Axles / brake system: # BPW axles with 17.5" drum brakes # 3rd & 4th axle as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 17 x brand tires 245 / 70 / 17.5" on steel rims Low loader: # fifth wheel height: 1250 mm # Lowbed length: 9,240 mm + 6,000 mm # 8 x 2 stake pockets 52 x 102 mm # 9 x 2 lashing eyelets 6to in the outer frame # 3 x 2 lashing eyelets 6to in the neck # 4 x 2 lashing eyelets 6to on the drop deck # Overwidth brackets 300 mm extendable # 45mm hardwood floor on the low loader Yjv8C # Color: RAL 3020 traffic red Drive-on ramps: # hydraulically sliding ramps with 40 mm hardwood floor # 4,200 mm long x 850 mm wide x 10° drive-on angle # 2kW electro-hydraulic pump # NATO socket for operating the electro-hydraulics incl. cable Miscellaneous: # 4 x overwidth signs with holder for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full front stabilizers # galvanized manual rear support # 2 inch kingpin # 24V lighting system Aspöck # E-wheel holder with spare wheel ---- Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Overall weight: 48,000 kg, maximum load weight: 37,581 kg, axe configuration: 3 axles, loading space length: 15,850 mm, Year of construction: 2024, Condition: new, total width: 2,550 mm, Equipment: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4,285 mm * Platform length 8,950 mm * Extension 6,900 mm * Extension locking position 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Axle load 10 tons * Overall width 2,550 mm * Total technical weight (80 km/h) 48,000 kg * Gross vehicle weight (60 km/h) 50,000 kg * Unladen weight 10,419 kg CHASSIS: BPW axles with air suspension and drum brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * Wabco brake system * 12 tires 245/70 R17.5 CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm thick hardwood floor * 9x2 side extensions extendable up to 300 mm * Telescopic rear support winch with 50 tons capacity * Mechanically folding rear outriggers with 45 tons capacity * Wheel recesses with dimensions of 420 mm depth, 800 mm width, * Suitable for tire diameters of max. 1,800 mm RAMPE: Mounts for ramps at the rear of the vehicle Kou7O2Tzk LOAD SECURING: Lashing rings * Stake pockets * stanchions * Container locks suitable for 1x20 ft. , 1x40 ft. or 1x45 ft. + 4 twist locks * Front wall made of steel material, height 1,500 mm with Code XL certificate ACCESSORIES: 1x plastic toolbox * Stake box with space for 18 stakes * 1x rotating beacon * Tire well bridge for closing the wheel wells * Ramp box Chassis color nova grey For further information please do not hesitate to contact us

Axe configuration: 3 axles, loading space length: 13,190 mm, loading space width: 2,550 mm, Condition: new, Equipment: ABS, Availability: approx. 5 months after receipt of order! B9Kdkah3Hg Kässbohrer 3 - Achs Tieflader ausziebar / extandable NEW VEHICLE SLA 3 SCAN Axles / brake system: # BPW axles with 17.5" drum brakes # 3rd axle as self-steering axle # 1st axle as lift axle # WABCO brake system 4S/3M # 13 x 245 / 70 / 17.5" on steel rims Low loader: # fifth wheel height: 1250 mm # Lowbed length: 9,240 mm + 6,000 mm extendable # 9 x 2 lashing eyelets 6to in the outer frame # 2 x 2 lashing eyelets 6to in the neck # 4 x 2 lashing eyelets 6to on the drop deck # 8 x 2 stake pockets Ø63 # Overwidth brackets 300 mm extendable # Hardwood floor 40 mm # Color: RAL 7021 Drive-on ramps: # hydraulically adjustable ramps with 40 mm hardwood floor # 4,200 mm long x 750 mm wide x 10° drive-on angle # 2kW electro-hydraulic pump # NATO socket for operating the electro-hydraulics incl. cable Miscellaneous: # 4 x overwidth signs with holder for rotating beacon # 1 x tool box on the right in the direction of travel # JOST full front stabilizers # galvanized manual rear support # 2 inch kingpin # 24V lighting system Aspöck # including 2 bearing blocks # including 12 container locks # E-wheel holder with spare wheel ---- Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Overall weight: 40,000 kg, maximum load weight: 30,310 kg, axe configuration: > 3 axles, Condition: new, NEW VEHICLE Fliegl 4-axle low-loader with 2 pairs of wheel recesses and ramps Total weight 40,000 kg Payload 30,310 kg Unladen weight 9,690 kg Cqmjyi7X Overall length 12,000 mm Loading length 10,000 mm Load bed 7,150 mm incl. 850 mm approach slope Loading height 900 mm 1st pair of wheel recesses after offset in the load bed, bottom length approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the load bed, bottom length 600 mm, 300 mm deep Widening to 3,000 mm, warning signs, rotating beacon, large lashing package 5 pairs of stake pockets in the outer frame Excavator trough 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes 235 / 75 R 17.5" tires Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps 2,800 mm x 750 mm with hydraulic operation Hydraulic side shift Installment plan offer: term 48 months, residual value 40%, down payment only VAT on the rental installments, monthly installment EUR 970.00 net Vehicle is available from 11.09.2023 from Messe Neumünster. Visit us at Nordbau - Stand West 121 directly next to the main entrance. More 3, 4 and 5 axle low loaders new and used available immediately

Overall weight: 40,000 kg, maximum load weight: 31,000 kg, axe configuration: > 3 axles, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, Condition: new, * PT 40.0 Profile: * Wabco EBS-E (electric brake system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 to. Gigant axles * Air suspension with lifting and lowering system and RtR valve * Pressure gauge for load weight determination (axles separated on 2 air suspension circuits) * Side collision protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * VA plastic quarter mudguards with splash guard * HA straight galvanized sheet steel skirts with splash guard Bhcn7Fpmwo * Reflective side and rear contour strip * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Drawbar with 50 mm drawbar eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Stem in front of the bogie platform approx. 490 mm long with 45° corners * ROBOTER welded ANTI-slip coating to the steel plate of the bogie platform * La-Si package consisting of: in front of the bulkhead beam left & right 1 x 13.4 to. UVV lashing roes, 4 holes in each side of the bogie platform, each with 2 to. Lashing force, 1 pair of lashing ropes (13.4 tons) hanging at the rear left & right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on each side with simultaneous 2 tons lashing possibility. lashing option * Hot-dip galvanized mechanical folding jib for 3 m total width (but not in the rear slope) * Plank holder for widening under the chassis on the left in longitudinal direction * Excavator stick support above HA up to the end beam approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t. lashing ropes on each side. Lashing ropes in the excavator stick support * Hardwood floor on the running surfaces of the low loading platform * Hydr. one-piece drive-on ramps (approx. 3,000 x 720 mm) mechanically adjustable to the side * Outer planks of the access ramps made of hardwood * Steel construction as preparation for 6-point control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm Chassis * Bogie, folding boom, mechanical drop supports, hot-dip galvanized ramps * Axles, air reservoir, drawbar painted black * 235/75 R 17.5 tires * Vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Overall weight: 40,000 kg, maximum load weight: 31,000 kg, axe configuration: > 3 axles, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, Condition: new, * PT 40.0 Profile: * Wabco EBS-E (electric brake system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 to. Gigant axles * Air suspension with lifting and lowering system and RtR valve * Pressure gauge for load weight determination (axles separated on 2 air suspension circuits) * Side collision protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear Cb3Bbaw * VA plastic quarter mudguards with splash guard * HA straight galvanized sheet steel skirts with splash guard * Reflective side and rear contour strip * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Drawbar with 50 mm drawbar eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Stem in front of the bogie platform approx. 490 mm long with 45° corners * ROBOTER welded ANTI-slip coating to the steel plate of the bogie platform * La-Si package consisting of: in front of the bulkhead beam left & right 1 x 13.4 to. UVV lashing roes, 4 holes in each side of the bogie platform, each with 2 to. Lashing force, 1 pair of lashing ropes (13.4 tons) hanging at the rear left & right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on each side with simultaneous 2 tons lashing possibility. lashing option * Hot-dip galvanized mechanical folding jib for 3 m total width (but not in the rear slope) * Plank holder for widening under the chassis on the left in longitudinal direction * Excavator stick support above HA up to the end beam approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 t. lashing ropes on each side. Lashing ropes in the excavator stick support * Hardwood floor on the running surfaces of the low loading platform * Hydr. one-piece drive-on ramps (approx. 3,000 x 720 mm) mechanically adjustable to the side * Outer planks of the access ramps made of hardwood * Steel construction as preparation for 6-point control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm Chassis * Bogie, folding boom, mechanical drop supports, hot-dip galvanized ramps * Axles, air reservoir, drawbar painted black * 235/75 R 17.5 tires * Vehicle has a day registration in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Overall weight: 14,400 kg, maximum load weight: 10,800 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, * 2 x 7 to. Giant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck * Support winch at the front * External folding supports at the rear * 15-pin power plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted 400 mm front wall made of smooth sheet metal Blnb28Gsj33 * Screwed rear stanchions * Perforated outer frame edged at approx. 45 degrees with 2 to. lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be fitted every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece hydr. grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydr. flow divider in the trailer (with hydr. pump capacity in the truck of over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, front support winch and flanged drawbar painted black * Preparation for possible retrofitting of side drop sides * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 14,400 kg, maximum load weight: 10,800 kg, axe configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, Condition: new, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, * 2 x 7 to. Giant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck * Support winch at the front * External folding supports at the rear * 15-pin power plug * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics Ij0Bg3Mw * Plastic toolbox approx. 858 x 500 x 500 mm at the front right outside on the bulkhead * Side collision protection * Plastic quarter mudguards * 50 mm softwood floor * Device in front of the bulkhead for retrofitting cont. locks * Bolted 400 mm front wall made of smooth sheet metal * Screwed rear stanchions * Perforated outer frame edged at approx. 45 degrees with 2 to. lashing force every 480 mm, installation of 3 to. Drop lashing hoops can be fitted every 600 mm, 1 x 6.3 to. lashing ring in the front and rear corners. Lashing ring in the front and rear corners, various holes for 1.2 to. lashing option * One-piece hydr. grid ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydr. flow divider in the trailer (with hydr. pump capacity in the truck of over 40 ltr. / min. up to max. 140 ltr. / min.) * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoir, front support winch and flanged drawbar painted black * Preparation for possible retrofitting of side drop sides * New vehicle with manufacturer's warranty * Subject to errors and prior sale * immediately available from Egestorf on the A7

Overall weight: 30,000 kg, maximum load weight: 24,020 kg, axe configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2024, Condition: new, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 to. Gigant axles * Parabolic springs, mechanical rear axle compensation * Side collision protection * Swivel supports at the rear of the chassis frame * mechanically adjustable warning sign packages front and rear * VA closed plastic mudguards and HA straight galvanized sheet steel skirts, each with splash guard * Reflective contour strip at the sides and rear * Tool box made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm * Hinged cover (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage system * LED tail lights * All-round light (removable) at the rear * Drawbar with 50 mm drawbar eye and height adjustment via tension spring & turnbuckle * 15-pin power plug * 4 stanchion pockets on each side (but no stanchions available) with simultaneous lashing option * La-Si package consisting of: 2 lashing ropes (6.4 tons) front left & right on the main frame of the bogie platform, 6 pairs of UVV lashing rings swiveling and lowerable, loadable in all directions and embedded in the outer frame - in the corners 13.4 tons, otherwise 10 tons. * 6 pairs of mech. folding outriggers for 3 mtr. total width (but not in the rear slope), Wuqhltl * Widening planks placed in the middle of the loading area * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mech. laterally adjustable, * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Loading height unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unloaded approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air reservoir etc. painted in a black color * 235/75 R 17.5 twin tires * approx. 5,980 kg unladen weight * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf