Telescopic handler

Haulotte Haulotte HTL 4017 II ** 17m / 4t. * vgl.

Condition: used, power: 55.4 kW (75.32 HP), fuel type: diesel, color: red, lifting power: 4 kg/m, lifting height: 18,000 mm, tire size: 15.5 / 80 - 24, tire condition: 98 %, axle configuration: 4x4, mast type: telescopic, Year of construction: 2018, operating hours: 907 h, Equipment: all wheel drive, cabin, hydraulics, pallet forks, trailer coupling, Off-road - MANITOU telescopic arm forklift, type: MT 1840 ST3B TURBO - 4x4x4, first use: 2019, LIFTING FORCE: 4,000 kg, LIFTING HEIGHT: 18.00 m, LONG LOADING FORKS (Fork length: 1.200 mm / pick-up width: 1,100 mm) - ADDITIONAL HYDRAULIC, LOAD PROTECTION GRID, QUICK CHANGER, 4-cylinder DEUTZ turbo diesel engine (type: TD 3.6 L4 - 75.34 hp / 55.40 kW at 2.200 rpm), CPB, ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVING, hydraulic outriggers (2x), SIDE LEVEL - REGULATION, OVERLOAD WARNING DEVICE, PANORAMIC CAB (large cab) - Colorglas, ROPS / FOPS, KAB - comfort seat, trailer coupling, traffic lights, windshield wipers (2x), exterior mirrors (2x), WARNING SOUND / WARNING LIGHT, heating / ventilation, OPERATING INSTRUCTIONS (in German). Tires: BKT OFF-ROAD TIRES (15.5/80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 7,420 mm (approx. 6,100 mm without fork), width: approx. 2,400 mm, height: approx. 2,540 mm. ∗∗∗ FINANCING POSSIBLE / TRANSPORTATION CHEAP (WORLDWIDE) / FOR EXPORT ONLY THE NET PRICE HAS TO BE PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - - - - - - Rough terrain telescopic forklift MANITOU, type: MT 1840 ST3B TURBO - 4x4x4, first use: 2019, LIFTING FORCE: 4.000 kg, LIFTING HEIGHT: 18.00 m, LONG FORKS (fork length: 1.200 mm / width admission: 1.100 mm) - ADDITIONAL HYDRAULIC, PROTECTION LOAD GUARD, QUICK CHANGER, 4-cylinder DEUTZ turbo-diesel-engine (type: TD 3.6 L4 - 75.34 PS / 55.40 kW at 2.200 rpm), CPB, FOUR-WHEEL-DRIVE and ALL-WHEEL-STEERING SYSTEM (4x4x4) - CRAB STEERING (dogway), hydraulic supports (2x), SIDE - EQUALISE - SYSTEM, OVERLOAD PROTECTION SYSTEM, PANORAMIC-CABINE (big driverhouse) - colorglass, ROPS / FOPS, KAB - comfort seat, follower coupling, road lightnings, windshield wiper (2x), back view mirror (2x), WARNING RING / WARNING LIGHT, heating / ventilation, OPERATION MANUAL (in German). Tyres: BKT ROUGH-TERRAIN-TYRES (15.5/80 - 24) - all around approx. 98 %. Transport dimensions: see above. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all European countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) ∗∗∗∗ © pb Prjdpfx Aor Nvx Hodhjb

Condition: used, Year of construction: 1998, operating hours: 7,950 h, Equipment: all wheel drive, MF Femtec 860 B backhoe loader from municipal ownership, always regularly serviced. 70 KW 95 HP Rear excavator can be moved sideways with telescopic extension bucket Accessories: 60 cm and 30 cm trench bucket 1.6 m trench cleaning bucket plus triangular trench cleaning bucket 4/1 folding bucket at the front with teeth Tires 70% 4 gears torque converter Reversing gear on the steering column All-wheel drive Diff lock Swivel seat Opening window Prjdpfxjv A Dgzs Adhsb Perkins 4 cylinder turbo engine Vehicle is in good condition and ready for use. VAT not deductible----Tel.: E-mail: josef. Location: 97778 Fellen/Rengersbrunn

Condition: new, Year of construction: 2022, Equipment: all wheel drive, &gt, new machine &gt, Manufacturer FAE &gt, Type radio remote controlled mulching caterpillar &gt, model RCU 55 Standard equipment: &gt, Kohler KDI 1903 engine with turbocharger and intercooler &gt, DOC/DPF exhaust gas aftertreatment &gt, Hydrostatic drive &gt, Hydrostatic drive for attachments &gt, Auxiliary hydraulics for implements &gt, Load control function (Load Control) &gt, Quick attachment plate with tilt and float system &gt, Independent hydraulically variable track width 1350 mm - 1750 mm &gt, High-profile rubber tracks and bogie roller system &gt, Combined aluminum radiator with anti-clogging slats &gt, Proportional reversible fan with hydraulic control &gt, Ergonomic joystick controls &gt, 3.5 inch LCD color display on the remote control &gt, Remote control with two batteries and battery charger on board the machine &gt, 7-inch LCD color display on the machine &gt, LED work lights Podpor Ivznsfx Adhjrb Technical data: &gt, engine output 56 hp &gt, exhaust emission stage EU Stage V &gt, traction pumps 2 - EP control - 28 cc - Danfoss &gt, Traction motors 2 - HY control - 30 cc - Danfoss &gt, Max. Travel pressure 325 bar &gt, Pump attachment 1 - EP control unit - 32 cc - Danfoss &gt, Max. Mulcher pressure 300 bar &gt, Hydraulic oil tank - 47 l &gt, Fuel tank - 42 l &gt, Track chain 72 pitch - 250 mm width - High profile &gt, Track rollers 5 + 5 HD style - Triple flange - Bogie sys (4 + 4) &gt, Front Idler / Tensioning Group triple flange - Automatic tensioning system &gt, Voltage 12 V &gt, Max. Forward speed 7 km/h &gt, Max. Reverse speed 7 km/h &gt, gradeability 55° - all directions &gt, Ground pressure 2340 kg (standard equipment, std. track) &gt, Ground Pressure 0.36 kg / cm2 Attachments - Forestry mulcher &gt, type BL1/RCU 125 &gt, working width 1240 mm &gt, total width 1532 mm &gt, weight 560 kg &gt, rotor diameter 310 mm &gt, number of blades Mini C/3 - 24 pieces Attachments - Hammer flail mulcher &gt, type PML/RCU 150 &gt, working width 1496 mm &gt, total width 1724 mm &gt, weight 410 kg &gt, rotor diameter 355 mm &gt, Number of flails PML hammer flails - 24 pieces

Condition: used, mileage: 1,091,180 km, power: 375 kW (509.86 HP), first registration: 11/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * DAF XF 510 * Retarder * Auxiliary air conditioning * New TÜV inspection (German vehicle inspection) at DAF * Year of manufacture: 2014 * Mileage: 1,091,188 km * VIDEO: Truck is ready to drive on-site Prjdpfx Aox Nz Izsdhsb * Engine failure, pressure in the water system * Engine overhauled at 950,000 km at DAF Service * XLRTEH4300G046773 * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber (English): Magdalena Ilic * You can find more trucks, construction machinery, and other machines on our website: * / * Discover more trucks, construction machinery, and other machines on our website: * / * Opening hours: Monday to Friday 07:30-12:00, 13:00-18:00, Saturday 07:30-17:00

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Steel floor with anti-slip surface -Including rail for aluminum ramps -2" – Kingpin -Mechanically operated BPW landing gear -550 mm long, 8’ bevel at the end of the gooseneck -Front bulkhead incl. parking position for rear wall, 400 mm high Pedpfxji Ai E Re Adhjrb -Spare wheel holder mounted vertically on the front of the gooseneck -3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck -Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized) -Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right Loading platform, single telescoping: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Fixed section at the front 700 mm -Sheet metal floor with anti-slip surface -Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses -Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -Supports for widening to 3,000 mm -Beveled vehicle rear 8°, 550 mm long -Sled design for easy installation and removal of ramps -Continuous mudflap at the rear -1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform -6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform -1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform -1 pair of rail pocket strips approx. in the center of the loading platform -1 pair of rail pocket strips on the fixed section -1 pair of rail pocket strips behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wood deck larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (dismantling system) Chassis: -Axle manufacturer BPW ECO Max -2 ride heights -4 axles á 10 t (technically 12 t) -Twin tires 245/70 R17.5 -2 x fixed axle and 2 x friction-steered axle -Reverse steering lock of the friction-steered axle via reverse gear -Brake system manufacturer Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible) Accessories: -4 chocks with holder -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm -Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included -Plug-in partition sheet at the end of the excavator recess -Electro-hydraulic unit for ramp operation -Ramp operation via wireless remote control -Hydraulic support legs at the rear of the vehicle for support during the loading process -1 pair of additional reversing lights rear, switched on in reverse gear -Wood widening planks - larch (option)

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin Predpfx Adsl Sl Izshob One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: new, loading space volume: 14 m³, Year of construction: 2026, Vacuum Roll-Off Container 10 m³ Suction Tank / Vacuum Tank · Mounted on subframe DIN 30722 – length 6060 mm · Steel tank with 10,000 liter capacity · Container and subframe hot-dip galvanized · Continuous angle frame, fully welded along the entire length · Designed for max. 0.5 bar pressure · Designed for max. 1.0 bar vacuum · 2 liquid separators · Safety system: manhole cover, control valve with safety dome including overflow valve · Mechanical level indicator with scale · 2 internal baffle plates with T-bar ring reinforcement · Suction connection at rear bottom: 4" x Ø 108 Perrot coupling · Suction connection left: 4" x Ø 108 Perrot coupling · Lockable storage boxes left and right with cover for hoses and tools · Engine unit installed between tank and front hook lift Compressor: MECII 9000 Ballast System · Vacuum compressor with injection air cooling · Heat-resistant vanes · Crash protection system · Max. delivery rate: 9,000 liters/min · Max. pressure: 0.5 bar · Max. vacuum: -0.95 bar · Continuous operation permitted at -0.6 bar · Automatic lubrication · Lubrication oil tank 2.5 liters · Oil level indicator for lubrication Engine: · Briggs & Stratton Vanguard Prjdpfx Ael Ixwljdhjb · 31 HP / 23.1 kW · Twin-cylinder V-engine, 4-stroke · OHV valve control · Electric start · 12 Volt battery · V-belt drive incl. guard · Fully mounted on console · Enclosure for theft protection High-Pressure Cleaner: · Working pressure: 30–150 bar · Cleaning capacity: 13 l/min · Original Honda engine · Automatic high-pressure hose reel · With 15 m HP hose DN08 · Cleaning lance · Dirt blaster · 2 plastic tanks, each 500 liters For technical data and further information, please contact us. Worldwide delivery, dealer inquiries welcome. Special constructions and specialized equipment available on request – contact us! Images are sample images; for current images, please contact us at: 02723 717 61-0 or by email: anfrage(ât)altro-tec.de

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Predpfswpknwjx Adhsb Subject to errors and prior sale!

Condition: used, mileage: 278,066 km, Year of construction: 2009, Drive: wheel Unladen weight: 72,000 kg Lifting capacity: 150,000 kg Cargo space dimensions: 1620 x 285 x 395 cm Serial number: 068506 Front tire condition: 80 Rear tire condition: 80 Please contact PFEIFER GROUP for further information. Pjdpfx Aew D N Raodhorb

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 7,908 h, fuel type: diesel, motor manufacturer: MERCEDES, gearing type: converter, battery voltage: 28 V, tire condition: 70 %, color: yellow, Equipment: CE marking, air conditioning, all wheel drive, centralized greasing system, full service history, seat heater, 4x4 tractor Only 8,000 operating hours Registered as a working machine and homologated for snow plow and salt spreader attachments on public areas Available: salt spreader trailer + 2 m³ salt spreader + ballast + homologated snow plow blade for road use – €5,000 + VAT Swivel seat with three positions Air conditioning Prsdpfxsv H Urcj Adheb External 24V electrical sockets front and rear for accessories