Construction trailers

Humbaur HS 105020

Condition: new, maximum load weight: 9,500 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 350 mm, total length: 7,160 mm, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2026, Humbaur HS 105020 BS * Tandem low-loader * Construction machinery transporter * Heavy-duty trailer * Planks positioned upright * New vehicle * Year of manufacture: 2026 * Immediately available * Overall dimensions: 7160 x 2550 x 3200 mm * Loading area: 5000 x 2010 x 350 mm * Gross vehicle weight: 11900 kg * Tare weight: 2400 kg * Payload: 9500 kg * Loading height: 700 mm * Ramp dimensions: 2600 x 540 mm CHASSIS * Maintenance-free parabolic suspension with load equalization * Tire size: 235/75 R17.5 * Tire pressure monitoring system (TPMS) incl. Auto-Locate BRAKE SYSTEM * EBS braking system according to ECE guidelines * 2 non-interchangeable coupling heads red/yellow ISO 1728 * Spring-loaded parking brake ELECTRICAL SYSTEM * 24-volt lighting system with LED multi-chamber rear lights and flashing LED side marker lights * 15-pole connector for lighting COUPLING * Tow bar galvanized, with bolted towing eye Ø 40 mm * Coupling height above crank, continuously adjustable CHASSIS FRAME * Solid, welded chassis frame, hot-dip galvanized * Low design, loading area level between the wheels * Floor covering made of 40 mm softwood planks, painted/impregnated * Fixed, hot-dip galvanized front and side walls * Rear corner posts pluggable CARGO SECUREMENT * 6 pairs of lashing points 1 t in the outer frame Hedpozr Tpajfx Adheu * 2 pairs of lashing points 3 t recessed in the bridge floor SUPPORT * Reinforced 12 t geared support winch with load and fast gear * 2 supports at the rear under the frame, foldable and telescopic RAMPS * 2 foldable steel ramps, galvanized, can be moved sideways * Ramp lifters (1 gas spring per ramp) * Ramp securing at the rear cross members * Ramp covering, grid galvanized EQUIPMENT * Steel fenders galvanized with anti-spray system * Rigidly mounted side impact protection, from the beginning of the bridge to the 1st axle * Contour marking on the side and rear * 2 wheel chocks with holder * Space for a two-line license plate Other heavy-duty low-loaders and trailers in various designs are immediately available! ATTENTION!!!!! READ CAREFULLY!!!!! We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. We strongly recommend an inspection and test so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired!!! Images are similar and may include optional accessories that are subject to an additional charge. The specified internal dimensions are approximate. For new vehicles, additional costs for vehicle documents and transport may be incurred. All information is without guarantee! Errors and omissions excepted. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE AND INSTALLMENT PURCHASES POSSIBLE!!! Exhibition area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8.30 a.m. to 5.00 p.m., Saturday 8.30 a.m. to 2.00 p.m. We have over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, functionality: fully functional, mileage: 236,149 km, first registration: 10/2007, fuel type: diesel, empty load weight: 2,600 kg, maximum load weight: 900 kg, overall weight: 3,500 kg, tire condition: 80 %, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 3, total length: 5,600 mm, total width: 2,100 mm, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,600 kg, loading space length: 3,000 mm, loading space width: 2,000 mm, IVECO DAILY 35C15K Three-sided tipper (internal dimensions: 3m long, 2m wide, 0.40m high) Leaf spring suspension 4x2 Manual transmission Tipping hydraulics GVWR 3,500kg - Payload 900kg Total truck length 5.6m Width 2.10m Wheelbase 3.00m Hodpfx Adjz Dahdshou Tires 80% tread Spare wheel Radio All information subject to change without notice; errors and omissions excepted.

Condition: new, maximum load weight: 9,500 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 350 mm, total length: 7,160 mm, total width: 2,550 mm, total height: 3,250 mm, Year of construction: 2026, Equipment: ABS, * Body and chassis galvanized * Low design, loading platform between the wheels * One-piece, sliding spring ramps, 2,400 x 540 mm, steel, hot-dip galvanized * Ramp surface made of grating, hot-dip galvanized * Permissible total weight 11,900 kg (or 10,500 kg) * Payload 9,350 kg (8,000 kg) * 2 pairs of lashing rings at 6,000 kg each * 6 pairs of lashing rings at 2,000 kg each * Loading height 700 mm * Loading area dimensions: 5,000 x 2,010 x 350 mm * Infinitely adjustable drawbar * Reinforced 12 t geared winch with load and fast-running mode * 40 mm spruce wood floor * 2 folding supports at the rear * Parabolic suspension * ABS Price ex works Gersthofen Hodpfx Aozrq Akedheu Additional cost for delivery from Bernkastel-Kues: €500 + VAT Additional cost for insertable rear wall: €108 + VAT

Condition: new, functionality: fully functional, Year of construction: 2025, HS 105020 BS 10145 / SMB with grating in the ramps ++ Delivery possible, freight costs upon request ++ Technical specifications: Hjdpfxjwkt Hle Adheu Loading height: 705 mm Drive-on angle: 16° Tires: 235/75R17.5 Equipment: ABS Chassis frame incl. SIDE WALLS AND TOW TUBE HOT-DIP GALVANIZED STRONG SMB AXLES WITH SOLID PARABLIC SUSPENSION AXLE UNIT WITH LOAD BALANCING 4 RECESSED AND FORGED LASHING POINTS IN THE CORNERS 12 LASHING BRACKETS INTEGRATED IN THE OUTER FRAME CONTINUOUSLY HEIGHT-ADJUSTABLE TOWING DEVICE RAMPS WITH STABLE, HOT-DIP GALVANIZED STEEL GRID FOR SUPER GRIP TAIL LIGHTS PROTECTED AND INTEGRATED IN THE UNDERRUN PROTECTION EXTRA HIGH CORNER RAILS FOR SECURE HOLD OF THE RAMPS STABLE, HOT-DIP GALVANIZED STEEL FENDERS 2 FOLDING AND TELESCOPIC REAR JACK LEGS ALUMINUM SIDE PROTECTION FROM THE BEGINNING OF THE LOAD BED TO THE 1ST AXLE - SOLID GEARBOX JACK WINCH WITH LOAD AND HIGH GEAR LOW LOADING HEIGHT 235/75 R17.5 INCH TIRES and much more... Loose accessories available as an option. - - All information without guarantee - - Images may vary - -

Condition: new, overall weight: 2,600 kg, axle configuration: 2 axles, suspension: other, Equipment: trailer coupling, Cable pulling winch Bagela KW 5010 L = 4800 mm, W = 1600 mm, H = 1450 mm Weight 1450 kg Tandem axle, braked Height-adjustable drawbar Lockable plastic housing 4-cylinder engine, LDW 10, 23 kW, diesel Hydraulic transmission 1000 meters of steel cable, D = 12 mm Maximum pulling force 50 kN Pulling speed 30 m/min Torque limiter with cable stop Hedpfxjiv D Rvo Adhou Operation via touchscreen Thermal printer Pulling speed can be continuously adjusted via a proportional valve Rear: 2 extendable support legs Many extras available upon request Freight and postage costs: 1380.00 Euros

Condition: new, maximum load weight: 8,200 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 350 mm, Year of construction: 2024, Equipment: ABS, * Drum brakes * Ramps, spring-supported and laterally adjustable * Frame completely hot-dip galvanized * 16 lashing points on the loading platform * Loading height approx. 700 mm * Drawbar, height-adjustable * Trailer immediately available Hjdpfxjh Rlx Do Adhou * Technically permissible total weight 11,900 kg with a payload of 9,450 kg * Suspension: leaf spring * Payload: 8,200 kg * Tires: 235/75R17.5 ---Information is non-binding - Errors and omissions excepted - Subject to prior sale.

Condition: new, empty load weight: 10,600 kg, maximum load weight: 35,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, loading space height: 940 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Loading area in extendable design -Loading area with hardwood planks with rear bevel of approx. 500 mm x 8° -2 pairs of lashing rings (LC 5,000 daN) Hjdel Ux Rwjpfx Adheu -1 pair of lashing rings (LC 10,000 daN) -6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -Cutouts in the outer frame of the loading area for attaching tensioning straps Braking system: -Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and in Painted RAL 9010 (pure white) -No metallic paint possible Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: -Steel construction made of high-strength fine-grain steel -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, LED lighting 24 volts -2x 7-pin & 15-pin sockets Axles and tires: -BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function -Hydro-mechanical forced steering -Axle tool -Twin tires 235/75 R 17.5 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with bracket -2" king pins -A galvanized steel front wall approx. 1600 mm high -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -Loading area with strong hardwood floor -Steering from the front and rear using a cable -Remote control operated via push buttons, with alignment control of the axles -With radio remote control for the steering -9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. -Galvanized folding supports under the slope of the loading area -Movable mounting rail for aluminum docking ramps at the rear of the vehicle -European reflector signs (red-yellow) at the rear of the trailer -A mud flap at the rear of the trailer -A bracket for a rotating beacon at the rear of the trailer -A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -A tool box INOX 1,500x390x810 under the loading area on the right in the direction of travel -Central lubrication system BEKAMAX (Pico) with normal grease NLHI-2 and removable protection around the pump -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft container or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container -4 pairs Stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes -Lift axle on the front axle with control by TEBS -A dependency on the current axle load and the current loading status -Speed sticker 80 km/h at the rear and on both sides -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light -A holder for a rotating beacon on the warning signs -Load pressure gauge for determining the axle loads including load diagram -HRM metallization (high resistance metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZIN

Condition: used, mileage: 300,200 km, power: 74 kW (100.61 HP), first registration: 04/2007, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, wheelbase: 3,954 mm, color: silver, gearing type: mechanical, emission class: euro4, number of seats: 3, loading space length: 3,700 mm, loading space width: 2,100 mm, Year of construction: 2007, - Used Truck: Ford Transit 350 Three-Way Tipper for Landscapers. - Registration: April 2007, Engine: 2.4 TDCi 100 hp Euro 4, Mileage: 300,200 km. - Gross vehicle weight: 35 Quintals, Payload: 10 Quintals, Rear twin wheels, Reinforced rear leaf springs. - Body: Three-Way Tipper, External dimensions: 3,700 x 2,100 mm, Aluminum sideboards, 400 mm high. No. 3 Mesh over-sideboards, Lifting via No. 5 hydraulic cylinders, Front pole rack with cab protection net, No. 2 cable tensioning winches, Rear light protection net. - Equipped with: Radio, On-board computer, Electric windows, Spare wheel. - Body and interior in reasonable condition, mechanically sound. - Note: Gearbox bearing slightly noisy/worn. - Valid inspection until June 2027. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy, opening hours: Monday to Friday: 8.30 AM / 12.15 PM - 2.00 PM / 7.00 PM Saturday: 8.30 AM / 12.00 PM - 2.00 PM / 5.00 PM - Certified Mileage. - Test drive possible by appointment. - Ownership transfer can be arranged on-site. - Customized financing options available. Carlo Mauri Srl disclaims all responsibility for any unintentional inaccuracies in this advertisement, which does not constitute any contractual obligation; prices quoted exclude VAT and ownership transfer fees. Hedpjzypk Aefx Adhju

Condition: new, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, suspension: steel, color: silver, Equipment: ABS, tail-lift, trailer coupling, 1 day €135 3 days €370 1 week €660 1 month €1950 Loading area 500cm x 201cm x 30 cm with access ramps 11.5 Construction machinery tandem low-loader HS 115020BS HOT-DIP GALVANIZED Equipment: • Permissible total weight kg • Payload approx. kg • Loading area approx. 5000 x 2010 mm Hjdpfjin Ia Rsx Adhou • Access ramps with grating surface, hot-dip galvanized • Fixed drawbar • Reinforced 25 t geared support winch with load and fast gear (no support wheel!) • 2 pairs of recessed 6 t lashing rings (in the corners) • 5 pairs of recessed lashing brackets in the outer frame (2000 daN per pair) • 2 folding supports at the rear of the vehicle • ABS braking system • Steel fenders, hot-dip galvanized • Bridge deck made of wooden paneling • Chassis frame including body hot-dip galvanized

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 780 kg, maximum load weight: 2,720 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MG 406 184 3500 2 Machine Transporter NEW VEHICLE Internal dimensions: 406 cm x 184 cm Side wall height: 30 cm Loading platform height: 40 cm Gross vehicle weight: 3500 kg Payload: 2717 kg Braked tandem trailer Overrun and handbrake system by AL-KO Maximum size axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30 cm steel side walls 15 mm thick, slip-resistant and heavy-duty phenolic plywood floor Automatic jockey wheel with 400 kg load capacity 12 lashing rings with 1000 kg tensile strength, also on the front panel Reinforced 13'' commercial tires with steel valve Hedpfxsrk Iz Ss Adhsu M+S tires Net/rope hooks on the frame 13-pin connector Front marker lights Rear lamps with reverse light, fog light, and triangular reflectors Steel loading ramps with eccentric fastener, 2800 kg Adjustable rear supports Walk-on steel mudguards OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Superstructure and mudguards painted in color of your choice - Black Edition: superstructure and mudguards painted black - Complete LED lighting - Anti-theft device - Fine or coarse-meshed net - H-frame - Force One checker plate floor and 4x checker plate steps - Grid between ramps - Shovel holder - Height-adjustable drawbar with DIN towing eye - Removable rear side panel Further accessories available on request! Plus freight to Gera and vehicle registration document: €250 net Images are for illustration purposes and may show optional equipment at extra cost. Haven’t found the right trailer? We have 50–100 vehicles permanently in stock for immediate pickup. Our workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Axle repair specialist, also for travel trailers. Additionally, we offer a wide range of spare parts and accessories, including for trailers from other manufacturers. We also offer a large selection of rental trailers. Visit us online or stop by in person.