Used Scania Trucks With Reefer / Refrigerator Trucks for sale (1,978)

Condition: used, machine/vehicle number: YS2R8X4000220xxxx, mileage: 77,500 km, Year of construction: 2024, Please provide reference number upon request: 23970 Specifications: EU-approved until 21 November 2026 2024 model Mileage: approx. 77,500 km Automatic transmission Full air suspension Tyres (see photos) Euro 6 Palfinger T22 hooklift, non-articulated Telescopic hook arm/hook tower Front wall with a vertical 150-litre hydraulic tank and sleeves for locking pins for a crane platform Hook height: 1,450 mm Snow plough equipment Retarder Hub reduction Length: 900 cm Width: 255 cm Wheelbase: 355/135 cm Kerb weight: 14,100 kg 8x4 660 hp Trailer hitch Reversing camera Bull bar with auxiliary driving lights included Auxiliary driving lights Air horns Rotating beacon Sleeper cab Refrigerator Radio/CD Air conditioning   Description: 2024 Scania R660 tridem hooklift truck with only 77,000 km. The truck is equipped with a Palfinger T22 Tech 5 hooklift system. The truck comes with two front-end setups: a summer front with bull bar and a winter front with snow plough mounting plate. Tipper body and flatbed can be included at an additional cost. The truck has been covered by a comprehensive service agreement since new. Can be delivered at short notice. See video. Km: 77500 HK: 659 Technical approved: Yes EU-approved until: 21.11.2026 Own weight: 14100 Width: 255 Length: 900 Euro: 6 Model: R660 Brøyterigget Tridem Krokbil - 24T Palfinger krok Gearbox: Automatic Crjdpfjzrr Dcjx Aanof = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2PH6X2Z0113xxxx, mileage: 420,000 km, Year of construction: 1989, Please provide reference number upon request: 23675 Specifications: 1989 model Km: approx. 420,000 Wheelbase: 420/135 cm Credpfozqlktsx Aanef 282 hp Spring: steel 2001 HIAB144D-5 DUO crane Laxo fastening Tip at the cash register Summer tires The box is welded enough to go through the EU Manual AC/climate Bed Radio Ready for delivery at the end of June   Description: 1989 Scania P93H crane truck/ with 14 t/m crane and Laxo attachment and tipper on the box. The photos were taken before the EU inspection, the owner has welded the car enough to go through the EU, but he says there is welding work left to get it properly in order. The car comes with summer tires, in somewhat uncertain condition. Winter tires can be added for an additional price. It is possible to fit a turntable on the car, but this is not included. The owner believes the box is about 5 meters. Ready for delivery at the end of June. Km: 420000 HK: 281 Technical approved: Yes EU-approved until: 01.05.2027 Own weight: 14165 Model: P93H kranbil med 14 t/m kran og Laxo feste og tipp på kassen. Nylig EU-godkjent. SE VIDEO Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000207xxxx, mileage: 131,586 km, Year of construction: 2012, Please provide reference number upon request: 22670 Specifications: 2012 model 131,586 km EU-approved until 22.04.26 Manual transmission 8x4 Euro 5 560 hp Tires (see pictures) Lift and swivel on 4 axles Superstructure: Disab 12,000 liters Supersucker High tipping function Service on the superstructure done by the owner at his own workshop Services done at Scania Climate/AC Radio Lights Ready for delivery Codpszqk Rrofx Aanerf Description: We have a 2012 Scania R560 8x4 supersucker with Disab superstructure for sale. There are some error codes displayed on the vehicle. These will be fixed and taken care of before sale. Aside from this, everything works as it should. However, errors and deficiencies may occur since the vehicle is from 2012. Ready for delivery. Km: 131586 HK: 560 Technical approved: Yes EU-approved until: 22.04.2027 Own weight: 25070 Total Weight: 33000 Payload: 7855 Width: 255 Length: 1180 Kw: 412 Euro: 5 Model: R560 8x4 supersuger m/ Disab påbygg Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000125xxxx, mileage: 593,000 km, Year of construction: 2000, Please provide reference number upon request: 23078 Crsdpfszqmbmsx Aanjf Specifications: Not EU approved Model year: 2000 Mileage: approx. 593,000 km Manual transmission Steel suspension Tires (see photos) 20T Joab hook with articulated arm Length: 845 cm Width: 250 cm Wheelbase: 470/134 cm Net weight: 12,760 kg 419 hp Trailer hitch Bed Radio/CD Climate control / AC Description: Scania 124G hooklift truck from 2000. Equipped with a 20T Joab hook with articulated arm. See video of it in operation. The front axle has been overhauled. The truck is not EU approved, so some investment/repairs should be expected. There is an electrical fault affecting power to the tachograph. Some hoses on the hook system are worn. Can be delivered on short notice. Km: 593000 HK: 418 Technical approved: no EU-approved until: 30.09.2014 Own weight: 12760 Width: 250 Length: 845 Model: 124G Krokbil - Joab krok med knekk = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2S6X2000563xxxx, mileage: 476,128 km, Year of construction: 2021, Please provide reference number upon request: 23456 Specifications: 2021 model Mileage: 476,128 EU approved until: 06.10.26 Euro 6 Automatic Retarder Axle 1 to 2: 315 cm Payload: 18,270 kg Tires (see pictures) Suspension: air Movable fifth wheel 6x4 540 hp Refrigerator 2 bunks Diesel heater Radio Air conditioning Lights Delivery by agreement Description: We have a 2021 Scania S540 6x4 tractor with ADR approval and silver agreement for sale. The vehicle is under a silver agreement with Scania and is very well maintained. Everything works as it should according to the owner. Delivery by agreement. Km: 476128 HK: 539 Technical approved: Yes EU-approved until: 06.10.2026 Own weight: 9730 Total Weight: 28000 Codpozqrxkofx Aanjrf Payload: 18270 Width: 255 Length: 684 Kw: 397 Euro: 6 Model: S540 6x4 trekkvogn m/ ADR godkjenning og sølvavtale Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000215xxxx, mileage: 171,245 km, Year of construction: 2020, Please provide reference number upon request: 22988 Specifications: 2020 model 171,245 km (will increase slightly) Csdezqlmuepfx Aanerf EU approved until: 29.01.27 Euro 6 Automatic transmission 8x4 500 hp Tires (see pictures) Suspension: air suspension Axle 1 to 2: 335 cm Payload: 17,125 kg Preparations for electric crane operation Hydraulic extension on the platform: Approx. 1 meter Combination vehicle Swivel plate Bull bar Extra lights Refrigerator Toolbox Tow hitch Climate/AC Radio Extra lights Delivery ready by agreement Crane specifications: 2019 model Certified until 07/26 7 hydraulic extensions on main boom 6 hydraulic extensions on jib + 3 manual Extra hydraulics all the way to jib Preparations for electric operation Winch Lifts 360º around Double support legs Front stabilizer Remote control Delivery ready by agreement Description: We have a 2020 Scania R500 8x4 combination vehicle with a 71 t/m Fassi crane, well-equipped for sale. The vehicle is under a gold agreement and everything works as it should. The vehicle is well-equipped and has most of the necessary equipment. The vehicle is delivery ready from July 6, 2026. Km: 171245 HK: 500 Technical approved: Yes EU-approved until: 29.01.2027 Own weight: 22800 Total Weight: 40000 Year controlled until: 07.2026 Payload: 17125 Width: 255 Length: 900 Kw: 368 Euro: 6 Model: R500 8x4 kombi bil m/ 71 t/m Fassi kran med jibb/winsj Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2P6X2000218xxxx, mileage: 205,000 km, Year of construction: 2021, Please provide reference number upon request: 21867 Specifications: Crodpfxezqryzs Aanof EU approved until 01.07.2026 Mileage: 210,000 km Transmission: Automatic Engine brake Euro 6, 370 hp Tires (see photos) Washing system JOAB Zoeller body Rear-view camera 6x2 Serviced under a gold maintenance contract since new Water tank: 1,200 liters Video attached Radio/CD Climate control/AC Ready for delivery Description:Well-maintained Scania waste collection truck with washing system.Equipped with JOAB body and a 1,200-liter water tank.Serviced under a gold maintenance contract since new.Ready for delivery. Km: 205000 Technical approved: Yes EU-approved until: 01.07.2026 Own weight: 16200 Total Weight: 30000 Payload: 13725 Width: 255 Length: 892 Euro: 6 Model: P370 Renovasjonsbil m/ Vaskeanlegg. SE VIDEO Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000203xxxx, Year of construction: 2008, Please provide reference number upon request: 20816 Specifications: - 2008 model - Km: approx. 479,000 - Engine brake - Suspension: air - Euro 4 - 3 axles - Wheelbase: 470/135 cm - Zepro lift - Tires (see pictures) - Tool cabinet - Rotary beam - Rear view camera - Remote control for lift - AC/climate - Bed - Ready for delivery Description: Cedozqlg Iepfx Aanorf 2008 Scania R480 3 axle container truck with lift. Sold without container. Container can be included for an additional price. Ready for delivery. HK: 480 Technical approved: Yes EU-approved until: 18.02.2027 Own weight: 10370 Payload: 16555 Model: R480 3 akslet conatinerbil m/ lift = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2G6X2000209xxxx, mileage: 853,000 km, Year of construction: 2013, Please provide reference number upon request: 21770 Specifications: Model year: 2013 Mileage: approx. 853,000 km Automatic transmission Tires (see photos) Tipping hydraulics Cedpfx Aaozqru Eonsrf Euro 5 Length: 680 cm Width: 255 cm Wheelbase: 310/131 cm Curb weight: 8,300 kg 6x2 480 hp Sleeper bed Radio/CD Air conditioning (AC) Description:Scania G480 tractor unit with tipping hydraulics.The truck is not EU-approved, so some maintenance or repairs should be expected.Available for quick delivery. Km: 853000 HK: 480 Technical approved: no EU-approved until: 30.04.2025 Own weight: 8300 Total Weight: 27000 Payload: 18625 Width: 255 Length: 680 Euro: 5 Model: G480 6x2 Trekkvogn m/ tipp hydraulikk Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000219xxxx, mileage: 251,000 km, Year of construction: 2023, Please provide reference number upon request: 22510 Specifications: • 2023 model• Km: approx. 251,000 (22.04.2026)• Automatic transmission• Tires (see photos)• Body from 2023• Jonsred J1088S timber crane from 2018• Retarder• Trailer hitch• Euro 6• Length: 1,066 cm• Width: 255 cm• Wheelbase: 320/135 cm• Curb weight: 13,400 kg• 8x4• 770 hp• Bull bar• Damage on right side (see photos)• Auxiliary high-beam lights• 2x air horns• Bed• Refrigerator• Radio/CD• Climate control / AC Description:Scania R770 Tridem timber truck from 2023. Equipped with a 2018 Jonsred J1088 timber crane. The truck is on a service agreement Brand new clutch.There is damage on the right side, shown in the photos.Can be delivered within short time. Km: 251000 HK: 769 Technical approved: no EU-approved until: 24.03.2026 Own weight: 13400 Total Weight: 36000 Crjdpfszqrf Rsx Aanjf Payload: 22525 Width: 255 Length: 1066 Euro: 6 Model: R770 Pusher Tømmerbil m/ Jonsred J1088 kran Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, Year of construction: 2000, Please provide reference number upon request: 23321   Specifications: • 2000 model• Arka body• Approx. 10 cubic meter tank (tank is not bolted down)• Previously used as a beer truck for Hansa Borg Bryggerier• Starts and runs• More information to follow Own weight: 1 Model: 114 med tank = More information = Crjdpjzqrabofx Aanef Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000220xxxx, mileage: 78,000 km, Year of construction: 2025, Please provide reference number upon request: 23299   Specifications: • 2025 model• Approx. 78,000 km• Automatic transmission• Tires (see photos)• Euro 6• Galvanized body• Flatbed length: approx. 625 cm• Overall length: 975 cm• Width: 255 cm• Wheelbase: 435/135 cm• Unladen weight: 15,760 kg• 6x4• 660 hp• Trailer hitch• Tool cabinet• Raised roof cab• Auxiliary driving lights• Rotating beacon bar• 2x air horns• 2x beds• Radio/CD• Climate control / AC Crane specifications: • Manufactured in 2019• 23 tonne/metre• Crane load chart• 5 hydraulic extensions• Low crane hours Description: Scania R660 6x4 flatbed truck with rear-mounted HMF crane. Both the truck and crane are delivered ready for operation. The truck is covered by a gold service agreement. Additional interior accessories are not included. Available for delivery on short notice. Km: 78000 HK: 659 Technical approved: Yes EU-approved until: 30.06.2027 Own weight: 15760 Year controlled until: 06.2026 Crjdpezqlp Nofx Aanof Width: 255 Length: 975 Euro: 6 Model: R660 6x4 Planbil m/ bakmontert 23 t/m HMF kran Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: 110xxxx, mileage: 485,890 km, Year of construction: 1985, Please provide reference number upon request: 23269   Specifications: 1985 model 485,890 km Converted to class 509 motorized equipment 343 hp Net weight: 16,000 kg Permitted total weight: 23,500 kg Max payload: 7,425 kg Length: 820 cm Manual transmission Equipment: Type: TKF 241F 1997 model Crane with operator cabin 4 outriggers Grapple Saw Description: Scania R112 with TKF 241F superstructure for tree topping/cutting for sale. It has been in daily operation for the last 12 years until the summer of 2025, with approximately 2,500 m² cut annually for private use. The truck was converted to class 509 motorized equipment in 1997. The engine has many operating hours and therefore shows some signs of cylinder blow-by, but the truck starts even at -25°C, so there are still many working hours left in it. The truck has not driven many kilometers and is therefore not heavily affected by rust on the frame or cab. The bodywork has some defects. The crane is in decent condition. It is a large crane with electric controls and foot pedal operation for the saw. The crane cabin has its own heater and can be raised to provide good visibility during operation. It is equipped with 4 outriggers, making it stable during use. There are some hydraulic leaks in a few of the crane cylinders. Ready for de Km: 485890 HK: 343 Technical approved: no EU-approved until: 31.10.2009 Own weight: 16000 Total Weight: 23500 Payload: 7425 Length: 820 Model: R112 Lastebil m/ kran og sag. Gearbox: Manual Credpfxszqllws Aanof = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000204xxxx, mileage: 870,000 km, Year of construction: 2009, Please provide reference number upon request: 23419 Truck Specifications: 2009 model EU-approved until: 30.08.26 Mileage approx: 870,000 Manual transmission 6x3 Retarder Euro 5 480 hp Tires (see pictures) Codpfx Aezqrvveanorf Front suspension: steel Rear suspension: air 2 beds Diesel heater Air conditioning Radio Lights Ready for delivery Trailer Specifications: 2008 model EU-approved until: 30.08.26 3-axle Tires (see pictures) Lift on 1 axle Axle 1 to 2: 290 cm Payload: 18,315 kg Full side opening on both sides Sliding roof Interior width: 2.538 m Interior length: 13.614 m Interior height: 2.844 m Lashing points Ready for delivery Description: We have a 2009 Scania R480 6x2 tractor with a 3-axle Krone Profi Liner Nordic tarpaulin trailer for sale. Everything works as it should according to the owner. Services have been carried out regularly. The mileage may increase slightly as it is in weekly operation. This set is sold together. Ready for delivery. Km: 870000 HK: 480 Technical approved: Yes EU-approved until: 30.08.2026 Own weight: 8610 Total Weight: 27000 Payload: 18315 Width: 255 Length: 660 Kw: 353 Euro: 5 Model: R480 6x2 trekkvogn m/ 3 akslet krone profi liner nordic kapelltralle Gearbox: Manual = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000217xxxx, mileage: 311,000 km, Year of construction: 2021, Please provide reference number upon request: 23040 Specifications: Model year: 2021 Mileage: 311,000 km (will increase slightly) 500 hp Crjdpfx Ajzqlnfsansf 8x4 Tires (good) Euro 6 Automatic transmission Suspension: full air 15 pallet spaces Lift on 4th axle Flatbed length: 6.50 m Total vehicle height: 3.90 m Lashing points on flatbed Gross weight: 33,000 kg Payload: 16,700 kg Climate control / AC Radio Lights Extra lights Ready for delivery Crane specifications: Model year: 2021 23 t/m crane 5 hydraulic extensions Approx. 1,500 crane hours (will increase slightly) Certified until: 02/2027 Outriggers Ready for delivery Description: We have a 2021 Scania R500 8x4 flatbed truck with 23 t/m Palfinger crane for sale. According to the owner, the truck is in good condition. It lifts 880 kg at 17 meters. All services on both truck and crane have been carried out continuously at a workshop. Ready for delivery. Km: 311000 HK: 500 Technical approved: Yes EU-approved until: 03.02.2027 Own weight: 15910 Total Weight: 33000 Payload: 16700 Width: 255 Length: 1012 Euro: 6 Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000206xxxx, mileage: 880,000 km, Year of construction: 2012, Please provide reference number upon request: 23167 Car specifications: 2012 model Km: approx. 880,000 Automatic Tires (see pictures) Backward tip New GHH Blower Compressor in 2024 Length: 928 cm Width: 255 cm Wheelbase: 430/136 cm Curb weight: 13,300 Max. truck combination weight: 66,000 kg 6x2 730 hp Cowcatcher Thousand meters 2x compressor horns 2x rotor lamps 2x bed Radio/CD Air conditioning/ac Specifications hinge: 2003 model Air suspension Tires (see pictures) Length: 1,110 cm Width: 250 cm Wheelbase: 453/136 cm Net weight: 7500 kg Backward tip Tool cabinet Description: 2012 Scania R730 tanker truck for sale with tanker trailer from 2003. There is a car and trailer tipping over backwards. A new blower compressor was installed 2 years ago. Can be delivered within a short time. Credpfszqrbfex Aanof   Km: 880000 HK: 730 Technical approved: no Own weight: 13300 Width: 255 Length: 928 Kw: 537 Euro: 5 Model: R730 6x2 Tankbil med Tankhenger - Bakovertipp Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X4000216xxxx, mileage: 696,000 km, Year of construction: 2020, Please provide reference number upon request: 23140 Car specifications: 2020 model Km: approx. 696,000 Automatic Tires (see pictures) Jilko P build Room distribution: 3 4 5 4 3 Gardner Denver compressor Euro 6 Length: 1,026 cm Width: 255 cm Wheelbase: 415/136 cm Curb weight: 15,020 kg Max. truck combination weight: 66,000 kg 8x4 650 hp Autoline sand str er Trailer hitch Compressor horn Bed Radio/CD Air conditioning/ac Specifications hinge: 2009 model Air suspension Room distribution: 3 4 5 4 3 Length: 1,000 cm Width: 255 cm Wheelbase: 385/170 cm Codjzqq U Repfx Aansrf Curb weight: 6,790 kg Description: Scania R660 bulk truck from 2020 sold with trailer from 2009. It is Jilko on construction on truck and trailer. The car and compressor have recently been serviced. Both the car and trailer are EU approved and ready to be put into operation. Can be delivered within a short time. Watch the video! Km: 696000 HK: 650 Technical approved: Yes EU-approved until: 10.01.2027 Own weight: 15020 Payload: 66000 Width: 255 Length: 1023 Kw: 478 Euro: 6 Model: R650 8x4 Bulkbil med bulkhenger - Jilko Påbygg Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X2000211xxxx, mileage: 256,000 km, Year of construction: 2016, Please provide reference number upon request: 22729 Car specifications: EU approved until 31.08.2026 2016 model Km: approx. 256,000 Opticruise Tires (see pictures) Retarder 4 hydraulic boat supports Combiplane Length on plan: approx. 670 cm 70 cm extension Laxo sleeves Euro 6 Length: 1,161 cm Width: 255 cm Wheelbase: 194/336 cm Curb weight: 24,690 kg 8x2 581 hp Heating in two cabinets Trailer hitch 2x rotor lamp Work light Small dent on the roof, shown in pictures Interior heater Bed Credpfxszqlpie Aanjf Radio/CD Air conditioning/ac   Crane specifications: Certified until 06.2026 2015 model Fassi F820, 80 t/m 6 Hydraulic extensions 6 hydraulic jibs 3 manual Crane hours: approx. 1715 Remote control Crane diagram Jib Winch Range: approx. 32 meters Description: Scania R580 8x2 Crane truck from 2016. Both the car and the crane are approved. Services have been carried out at a reputable workshop. The car is equipped with an 80 t/m Fassi crane with jib and winch. Crane has only had 1715 hours. It is a combi plane that can be easily removed. Can be delivered within a short time. Watch video.   Km: 256000 HK: 580 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 24690 Width: 255 Length: 1161 Kw: 427 Euro: 6 Model: R580 8x2 Kranbil - 80 t/m Fassi kran m/ jibb og vinsj = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000217xxxx, mileage: 295,000 km, Year of construction: 2020, Please provide reference number upon request: 23605 Truck Specifications: Mileage: 295,000 km Transmission: Automatic Retarder Full air suspension Euro 6, 650 hp Good tires 6x4 Istrail tipper body Heated body Rear-view camera Only one driver since new Upgraded sound system Leather seats Trailer hitch VBG coupling Refrigerator Maximum payload: 16,235 kg Air horn Sleeper bed Radio/CD Climate control/Air conditioning Service agreement Trailer Specifications: 2020 Istrail Tri-Axle Trailer 3 axles Lift axle on the 1st and 3rd axle Air suspension Good tires Maximum payload: 20,200 kg Description: 2020 Scania R650 tipper truck with a 2020 Istrail tri-axle trailer. Ready for immediate delivery. Km: 295000 HK: 649 Technical approved: Yes EU-approved until: 11.06.2027 Own weight: 13690 Credpfszqrk Hsx Aanof Total Weight: 30000 Payload: 16235 Width: 255 Length: 756 Euro: 6 Model: R650 6x4 Tippbil m/ 2020 Istrail Trippelkjerre Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X2000211xxxx, mileage: 506,000 km, Year of construction: 2015, Please provide reference number upon request: 23258 Specifications: Inspection report with defects available Mileage: approx. 506,000 km Transmission: Automatic Full air suspension Retarder Tires: see photos 6x2 with steering on 3rd axle JOAB body 20T hook lift Euro 6, 581 hp Extra front lights Trailer hitch VBG coupling Sleeper cab Wheelbase: 450 cm Radio/CD Climate control / AC Service and maintenance carried out by local workshop Ready for delivery Description: 2015 Scania R580 6x2 hook lift truck.Inspection report with defects is available.Equipped with JOAB body and 20T hook lift. Km: 506000 HK: 580 Technical approved: no EU-approved until: 31.01.2025 Own weight: 10660 Total Weight: 30000 Payload: 19265 Width: 255 Cedszqmf Eopfx Aansrf Length: 836,5 Euro: 6 Model: R580 6x2 Krokbil m/ JOAB påbygg. Rep objekt Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R6X4000208xxxx, mileage: 580,000 km, Year of construction: 2013, Please provide reference number upon request: 23836 Specifications: Mileage: approx. 580,000 km Transmission: Automatic Full air suspension Euro 5, 620 hp Retarder Hub reduction Crjdpfx Aajzqrwaensf 6x4 Hydraulics Good tires Sliding fifth wheel Wheelbase: 310 cm Unladen weight: 10,500 kg Sleeper cab Radio/CD Climate control / A/C Service history with Scania Recently completed major service Ready for delivery Description: Scania R620 6x4 tractor unit. The vehicle has recently undergone a major service. Ready for delivery. Km: 580000 HK: 620 Technical approved: Yes EU-approved until: 03.07.2027 Own weight: 10500 Total Weight: 28000 Payload: 17500 Width: 255 Length: 670 Euro: 5 Model: R620 6x4 Trekkvogn m/ hydraulikk. Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YS2R8X2000215xxxx, mileage: 191,000 km, Year of construction: 2019, Please provide reference number upon request: 22360 Truck specifications: • EU-approved until 13.08.2026• Model year: 2019• Mileage: approx. 195,000 km• Opticruise• Tyres (see photos)• Retarder• Platform length: approx. 630 cm + 120 cm extension• Outriggers• Boat supports• Factory-new engine• Hydraulic underrun protection• Euro 6• Length: approx. 1,100 cm• Width: approx. 255 cm• Wheelbase: 199 / 316 cm• Unladen weight: approx. 25,740 kg• Drive: 8x2• Engine output: 581 hp• Tool boxes• Reversing camera• Trailer coupling• Light bar• 2 air horns• 2 sleeping berths• Refrigerator• Radio/CD• Climate control / A/C Credpfx Aajzqlpvjnjf Crane specifications: • Hiab X-HIPRO 858• Model year: 2018• Certified until 11.2026• Total hours: approx. 6,196• Crane hours: approx. 2,172• Load chart• Jib• Winch• Outreach: 8 hydraulic + 6 on jib + 1 manual• Reach: approx. 36 metres• Remote control Description:Scania R580 crane truck equipped with an 85 t/m Hiab crane with jib and winch. The crane features 8 hydraulic extensions, 6 extensions on the jib and one manual extension, giving a total reach of approx. 36 metres.Platform length is approx. 630 cm with a 120 cm hydraulic extension.The truck is fitted with a factory-new engine that has seen very little use since installation.Both truck and crane are approved, and the vehicle is reinforced.Available for delivery at short notice.See video! Km: 191000 HK: 580 Technical approved: Yes EU-approved until: 13.08.2026...

Condition: used, machine/vehicle number: YS2R6X2000553xxxx, mileage: 165,000 km, Year of construction: 2019, Please provide reference number upon request: 22359 Specifications: EU-approved 26.09.2026 Model year: 2019 Mileage: Approx. 170,000 km Transmission: Automatic Tires: See pictures Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Approved to nov 2026. Hours: approximately 3000 Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. The flatbed length is 630 cm. Quick delivery available. Km: 165000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2026 Own weight: 20374 Total Weight: 30000 Year controlled until: 11/26 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: 2019 Scania R500 6x2 kranbil m/ 47 t/m Hiab kran med jibb. Gearbox: Automatic = More information = Please contact ATS Norway for more information Credpfx Aaezqlmhsnof

Condition: used, mileage: 1,072,400 km, power: 427 kW (580.56 HP), first registration: 04/2015, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, parking heater, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Digital tachograph - Lift axle - Refrigerator Csdpfx Aajztcx Hensrf - Air suspension - Power take-off (PTO) - Radio/CD player - Sleeper cab - Sun visor - Tow hitch = Further Information = Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Axle Configuration Suspension: Air suspension Front axle 1: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 25%; Tire tread depth right: 25% Front axle 2: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction Rear axle 1: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left inner: 35%; Tire tread depth left outer: 35%; Tire tread depth right inner: 35%; Tire tread depth right outer: 35%; Reduction: single reduction Rear axle 2: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 16,610 kg Payload: 15,390 kg GVWR: 32,000 kg Functional Crane: KESLA 2112 Z, year of manufacture 2015, mounted at the rear of the chassis Condition Damage: none

Condition: used, mileage: 10,350 km, lifting height: 35,000 mm, Year of construction: 2023, operating hours: 994 h, Application: Construction Drive: Wheel Unladen weight: 29,900 kg Lifting capacity: 19,640 kg Serial number: 1190603 Front tyre condition: 0 Rear tyre condition: 0 Transport dimensions (L x W x H): 9.99 x 2.55 x 3.95 m Please contact PFEIFER GROUP for further information. Crodpfx Ajvbaqaeanjf