Used Other Interchangeable Chassis / Swap Chassis for sale (288)

Condition: used, first registration: 05/2001, | Interchangeable platform | Side walls 60 cm | 7.45 meters | Subject to errors, typos, and prior sale. Todpszrxawjfx Abvsb

Condition: used, machine/vehicle number: WFDFLT21802036332, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Swap-Body Trailer Please note: the images shown are archive photos. #Weights and Dimensions - Gross vehicle weight: 18000 kg - Payload approx.: 14800 kg - Bogie load: 18000 kg - Nose weight: 1000 kg - Unladen weight (base version) approx. only: 3200 kg +/- production tolerance - Overall length with 7820 mm swap body approx.: 10020 mm - Overall width max.: 2550 mm - Frame height lowered approx.: 1010 mm - Frame height raised approx.: 1390 mm - Frame height in travel position approx.: 1070 mm - Parking height approx.: 1040 to 1320 mm - Standard stop to front locking device approx.: 985 mm - Locking distance: 5853 mm - Coupling height approx.: 380 mm - Drawbar length set from 7820 mm swap body stop approx.: 2200 mm - Parking heights apply on level ground. - The towing vehicle must have a similar lift range to the trailer, otherwise the unit will stand at an angle. #Chassis - Swap-Body Centre-Axle Trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body) - 1 pair of geared landing legs front, with straight foot and single-side operation on the RHS (direction of travel) - 1 pair of geared landing legs rear, with straight foot and single-side operation on the RHS (direction of travel) - 2 wheel chocks with holder - Aluminium side impact protection - Steel rear underrun protection - Full-width rear mudflaps (not in combination with forklift pockets) - Half-shell mudguards - Mudflaps #Coupling Gear - Centre-Axle Trailer - Drawbar with certified 50 mm tow eye, haulage-specification version - Low-mounted drawbar coupling, 2200 mm - Coupling height: 380 mm #Axles and Suspension - SAF disc brake axles - Axles/chassis laser-aligned - reduces tyre wear and fuel consumption - Air suspension #Braking System - 2-line air braking system - Colour-coded pipework for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, with connecting lines to the towing vehicle, connection on the RHS - 24-volt EBS electronic braking system with EBS connector at the front, with connecting cable, connection on the RHS - Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS! - With lift-and-lower valve, hold function in both lowered and raised positions #Wheels and Tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED marker lights at the sides - 2 white front position lights - 2 white/red rear tail lights Tsdpfxezu I D Rs Abvsb - 2 x 7-pin anti-mismatch connectors at the front, with connecting cable, connection on the RHS - LED work lights on both sides (switched via reversing light) - 2 additional LED work lights at the rear, switched via reversing light - 1 LED work light at the front, centred between the beams, facing rearward, switched via reversing light #Country of Registration / Plates - Germany - With Dekra inspection and certificate (in accordance with §13 EC-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT21802036327, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 70 %, color: grey, Swap-Body Trailer Please note: the images shown are archive photos. #Chassis - Swap-Body Centre-Axle Trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body) Tjdpfx Ajzu Iv Hobvsb - 1 pair of geared landing legs front, with straight foot and single-side operation on the RHS (direction of travel) - 1 pair of geared landing legs rear, with straight foot and single-side operation on the RHS (direction of travel) - 2 wheel chocks with holder - Aluminium side impact protection - Steel rear underrun protection - Full-width rear mudflaps (not in combination with forklift pockets) - Half-shell mudguards - Mudflaps #Coupling Gear - Centre-Axle Trailer - Drawbar with certified 50 mm tow eye, haulage-specification version - Low-mounted drawbar coupling, 2200 mm - Coupling height: 380 mm #Axles and Suspension - SAF disc brake axles - Axles/chassis laser-aligned - reduces tyre wear and fuel consumption - Air suspension #Braking System - 2-line air braking system - Colour-coded pipework for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, with connecting lines to the towing vehicle, connection on the RHS - 24-volt EBS electronic braking system with EBS connector at the front, with connecting cable, connection on the RHS - Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS! - With lift-and-lower valve, hold function in both lowered and raised positions #Wheels and Tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED marker lights at the sides - 2 white front position lights - 2 white/red rear tail lights - 2 x 7-pin anti-mismatch connectors at the front, with connecting cable, connection on the RHS - LED work lights on both sides (switched via reversing light) - 2 additional LED work lights at the rear, switched via reversing light - 1 LED work light at the front, centred between the beams, facing rearward, switched via reversing light #Country of Registration / Plates - Germany - With Dekra inspection and certificate (in accordance with §13 EC-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape to ECE R 048, white at the sides and red at the rear #Paintwork - Frame: DB 7350 Nova Grey - 10-year warranty against corrosion perforation

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2015, Equipment: ABS, Vehicle Identification Number: WKEZZ00000686469 Unladen weight: 3,440 kg Next mandatory technical inspection (TÜV) due BPW Eco Plus axles with disc brakes Wheelbase: 1,810 mm Tires: 385/55 R 22.5 Spare wheel carrier WITHOUT spare wheel Changes, prior sale, and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase agreement shall be decisive. Tsdpfx Aezu Udwsbvob Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap chassis, Type: MAXI AZW 18 eL3B7, year of manufacture 02 / 2023 > Offer subject to change and prior sale reserved > Gross weight 18,000 kg > Technically ready for operation with normal signs of use, as shown in the images > Frame/body: Colour RAL 9005 / black > Suitable for BDF bodies 7.45 with support height from 1,020 to 1,320 mm > Ride height unladen: 1,080 mm > Tyres: 4 x 445/45 R19.5, in good condition > Axles: Brand BPW Tsdpfx Abszniwrsvob > Braking system: EBS 4S/3M > Towing drawbar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with 40 mm towing eye > Main inspection + safety inspection current / NEW > Air connections: DUOMATIC > Electrical connections: ABS and 1 x 15-pin > Additional galvanized rear impact protection > Immediately available, multiple units in stock > Price ex location D-59269 Beckum

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2022, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2022, Equipment: ABS, KRONE 2-axle swap chassis, Type: AZW 18 eL3B9, year of manufacture: 10 / 2022 > Offer non-binding and subject to prior sale > Gross weight: 18,000 kg > Technically ready for operation, with normal signs of use as shown in the pictures > Body/Chassis: Color RAL 9005 / Black > Suitable for BDF 7.45 bodies with support height from 1,020 to 1,320 mm > Ride height unladen: 1,080 mm > Tyres: 4 x 445/45 R19.5, good condition > Axles: Manufacturer BPW > Braking system: EBS 4S/3M > Towing bar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with 40mm towing eye Todpfxjznivbo Abveb > TÜV + safety inspection current / - NEW > Air connections: RED / YELLOW > Electrical connections: ABS and 1 x 15-pin > Additional galvanized underrun protection at rear > Immediately available, several units in stock > Price ex location D-59269 Beckum

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap chassis, Type: MAXI AZW 18 eL3B7, year of manufacture 02 / 2023 > Offer non-binding and subject to prior sale Tedpoznivhsfx Abvjb > Gross weight 18,000 kg > Technically ready for operation with normal signs of use, as shown in the pictures > Body / chassis: Color RAL: 9005 / black > Suitable for BDF superstructures - 7.45 with a support height from 1,020 to 1,320 mm > Unladen ride height: 1,080 mm > Tyres: 4 pcs, 445/45 R19.5, in good condition > Axles: Brand BPW > Brake system: EBS 4S/3M > Drawbar: length adjustable (12 x 50 mm) from 1,800 to 2,400 mm with towing eye / 40 mm > MOT & safety inspection current / new > Air connections: red / yellow > Electrical connections: ABS and 1 x 15-pin > Additional galvanized rear underrun protection > Immediately available and available in multiple units > Price ex location D-59269 Beckum

Condition: used, overall weight: 16,000 kg, first registration: 01/1999, loading space length: 5,394 mm, loading space width: 2,489 mm, loading space height: 2,576 mm, Year of construction: 1999, Equipment: crane, GLEICH VEHICLE CONSTRUCTION PR.+PL. ? ATLAS AK 190.1 ? 16.3M CRANE? ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST 2 UNITS AVAILABLE / 1 WITH FASSI CRANE / 1 WITH ATLAS CRANE ----VEHICLE EQUIPMENT ----VEHICLE DATA GROSS VEHICLE WEIGHT: 16,000 KG OVERALL LENGTH: 7,450 MM ----CRANE PLATFORM MOUNTING POINTS: APPROX. 5.86 M Todex S Tmnopfx Abvsb ----CRANE SUPERSTRUCTURE ATLAS CRANE MODEL: AK 190.1 A4 YEAR OF MANUFACTURE: 1999 MAXIMUM WORKING PRESSURE: 300 BAR MAXIMUM LIFTING CAPACITY AT 2.2 M OUTREACH: APPROX. 6,550 TO 7,400 KG MAXIMUM OUTREACH: 16.3 M WITH APPROX. 710 TO 770 KG LIFTING CAPACITY CRANE OPERATED VIA SEPARATE DIESEL ENGINE ----BODY FLATBED WITH CURTAIN SIDE MANUFACTURER: Gleich Fahrzeugbau GmbH FLOOR MADE OF APPROX. 30 MM WATERPROOF BONDED FILM FACED PLYWOOD SIDE PANEL HEIGHT: 800 MM SIDE WALLS FOLDABLE AND REMOVABLE FIXED FRONT WALL REAR WITH DOUBLE DOORS AND BAR LOCKING MECHANISM LASHING POINTS INTEGRATED INTO EDGE PROFILE SUBFRAME MADE OF STEEL, AUXILIARY FRAME ACCORDING TO DIN EN 283 284 ----TARP/CURTAIN ROOF COLOUR APPROX. RAL 9010 SLIDING CURTAIN LIGHT GREY SLIDING ROOF, SIDEWAYS OPENING FRONT AND REAR ----INTERNAL DIMENSIONS LENGTH: 5.4 M HEIGHT: 2.57 M WIDTH: 2.49 M ----CONDITION UVV INSPECTION OF LOADING CRANE PERFORMED NO SAFETY-RELATED DEFECTS FOUND CRANE FULLY FUNCTIONAL CRANE REMOTE CONTROL AVAILABLE ----EXPORT SALES ONLY WITH DEPOSIT (MINIMUM 500 – 2000 €) EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 € CUSTOMS EXPORT CLEARANCE (EXW) WITHIN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21 DAYS AUSTRIAN PLATES, EURO 1 VEHICLE RESERVATIONS ONLY VIA E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least 500.00 € / 1,000.00 € is required for sales to EU or third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to changes, errors, and prior sale! See more vehicles on our homepage: Sale is exclusively subject to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our listing, errors may occur. Some of these may be due to transmission errors in the systems of the various platform providers. Therefore, all specifications are made without guarantee and do not represent legally binding characteristics. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information provided for the initiation of a contract. All details are given without guarantee and do not constitute warranted characteristics.

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Todpjzufl Sefx Abvsb Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Condition: used, axle configuration: 2 axles, first registration: 06/2021, Equipment: ABS,

Condition: used, empty load weight: 2,210 kg, maximum load weight: 6,790 kg, overall weight: 9,000 kg, axle configuration: 1 axle, first registration: 07/2026, next inspection (TÜV): 07/2027, total length: 2,480 mm, total width: 1,250 mm, total height: 89,050 mm, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | Krone 1-axle trailer | Krone axle | Spare wheel holder | Rear support | Tires: 385/65R22.5 | Disc brakes | 2260 kg tare weight | Valid inspection report/TÜV until | Subject to errors, typos, and prior sale. Todpfx Aozn H N Ejbvjb

Condition: new, empty load weight: 2,985 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2026, suspension: air, tire size: 4-fach 385/65 R 22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Center axle swap body trailer, new vehicle. Design: Standard, without lift axle. ZZW 18. Axles (BPW, manufacturer's choice), ABS/EBS disc brakes. Coupling height: 750 mm, high-coupled. Upper lifting height: 1,320 mm, lower lifting height: 1,220 mm, driving height: 1,255 mm. For parking heights of 1,220 - 1,320 mm. Tires: 4 x 385/65 R22.5 (manufacturer's choice) without spare wheel carrier. Spare wheel available at an extra cost. Wheels with internal sensors and tire pressure monitoring system according to UN ECE R 141 (TPMS). Suitable for the transport of standardized swap bodies according to EN 284, size C715 and C745. Suitable for the transport of standardized containers according to ISO 668/1496, size 20'. Front support with crank and gearbox. Rear support with 2 galvanized support legs, foldable and height-adjustable. Drawbar with bolted ø 50 mm drawbar eye. Drawbar length (dimension from center of drawbar eye to front edge of front wall): 1,650 mm. Additional button to activate the "brake release function" for stress-free lifting of the vehicle superstructure. Lighting and signaling system according to ECE . 48 LED side marker lights with direction indicator (flashing function), 2 LED outline lights in rubber arm, LED multi-function tail lights, 2 LED license plate lights, 1 reversing light and 1 additional LED reversing light. Wheel arch and splash guard according to EC Directive. Electrical system: 15- or 2x7-pole according to customer's request, incl. Air: Duomatic or Yellow/Red according to customer's request, incl. Accessories available at an extra cost. All specified values are approximate dimensions in mm and kg. Delivery date upon request. Leasing possible. Currently available from approx. November. Todpfeubztqox Abvsb The offer is subject to change, and prior sale is reserved. Prices are net, ex works D-59558 Lippstadt-Rixbeck. You can find more items at .

Condition: new, empty load weight: 2,974 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2026, suspension: air, tire size: 4-fach 385/65 R 22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Central axle swap body trailer, new vehicle. Version: Standard, with lift axle. ZZW 18.\nAxles (BPW, manufacturer's choice), ABS/EBS disc brake. \nDimensions: L= 8,963 mm, W= 2,480 mm, unladen weight: 2,985 kg. \nCoupling height: 800 mm, high-coupled.\nTop lift: 1,320 mm, bottom lift: 1,220 mm, ride height: 1,255 mm. \nFor parking heights of 1,220 - 1,320 mm.\nWithout toolbox against image\n\nWheels with internal sensors and tire pressure monitoring system in accordance with UN ECE R 141 (TPMS)\n\nTires: 4-ply 385/65 R22.5 (manufacturer's choice) without spare wheel basket. \nSpare wheel available at an extra charge. \n\nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'. Loaded to 12 tons with 40 mm drawbar eye. \n\nWith lift axle. Attention: Lift axle only lifts with unloaded vehicle with max. 3 to body\nPlease note that the function of the lift axle is no longer given in connection with unloading and the attachment of a 40 mm towing eye. The vehicle must then be completely unloaded, as the dead weight of an empty swap body/platform is already sufficient for the lift axle to no longer function.\n\nSupport at the front with crank and gearbox. \n\nRear support with 2 galvanized support legs, foldable and height-adjustable.\n\nTowing bar with bolted ø 50 mm towing eye. Towbar length (dimension from center of towing eye to front edge of bulkhead): 1,650 mm.\n\nAdditional button for activating the 'brake release function' for tension-free lifting of the vehicle body.\n\nLighting and light signal device in accordance with ECE . 48\nLED side marker lights with direction indicator (flashing function),\n2 LED clearance lights in the rubber arm,\nLED multifunction rear lights,\n2 LED license plate lights,\n1 reversing light and \n1 additional LED reversing light. \n\nWheel cover and splash guard in accordance with EC Directive\n\nElectrics: 15- or 2x7-pin according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n\nDelivery date on request. Leasing possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Tedpfx Aber Il Ddsvob

Condition: used, first registration: 07/2022, Kögel central axle swap body trailer, 22.5-inch deep, rigid drawbar, SAF axles, tire size 385/55 R22.5, for swap bodies C715, C74, C782, for bridge heights from 1,120 mm to 1,320 mm. 3 units available! Sale exclusively to businesses, with no warranty whatsoever. Errors and prior sale excepted. Tsdpfx Abszi A R Ujvob

Condition: excellent (used), functionality: fully functional, overall weight: 44,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2016, Equipment: ABS, tail-lift, KOGEL SEMI-TRAILERS AIR SUSPENSION Tedpszqgdhjfx Abvjb LIFT AXLE SLIDING ROOF MERCEDES AXLES ROOF LIFTING SYSTEM EBS

Condition: used, overall weight: 16,000 kg, axle configuration: 2 axles, first registration: 06/2017, Year of construction: 2017, (5 units available) Tedpfszbwacjx Abvob All information provided without warranty.

Condition: used, maximum load weight: 15,040 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, Equipment: ABS, * Trailer from first owner * For parking height 1,020 – 1,320 mm * Unladen ride height approx. 1,080 mm * Drum brakes * Spare wheel holder * LED reversing light * Extendable drawbar * Tyres 445/45R19.5 (20–40%) * Central lubrication * BPW axles Tsdpfxsztt Ufs Abvsb Information: All details without guarantee – subject to prior sale!

Condition: used, maximum load weight: 14,530 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2019, next inspection (TÜV): 05/2027, total width: 2,480 mm, total height: 1,090 mm, Year of construction: 2019, Equipment: ABS, 2-axle Krone AZ18 XFO BDF tandem trailer VIN: 0867514 Chassis / Components: * Air suspension / Raise and lower function * Large-stroke air springs * 2 x BPW axles with disc brakes * Tires: 385/55 R22.5 * Remaining tread depth: Front approx. 40/30%, Rear approx. 40/30% * Spare wheel carrier for 2 tires * Wabco Smart Board Body: * BDF tandem trailer Weights: Tedpfx Abjzr Sydovjb * Gross vehicle weight: 18,000 kg * Unladen weight: 3,470 kg * Payload: 14,530 kg Other: * German vehicle * MOT valid until 11/2026 New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer registration plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, sales subject to prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we are very concerned about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registration / Export registration plates We will gladly assist you in obtaining export registration plates/short-term registration plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, functionality: fully functional, empty load weight: 3,570 kg, maximum load weight: 14,430 kg, overall weight: 18,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 05/2019, next inspection (TÜV): 05/2027, suspension: air, tire size: 385/80/22,5, tire condition: 60 %, color: other, trailer brake: trailer braked, Equipment: ABS, center pivot plate, tail-lift, For sale is a WECON turntable trailer with a frame for interchangeable bodies and a Bär Cargolift tail lift with a load capacity of up to 2000 kg. Everything is fully functional and has a valid inspection certificate until 05/2027. Tsdpfx Ajzttanobveb

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, Equipment: ABS, | Krone AZW18 Trailer | Krone axles with disc brakes | New vehicle | Spare wheel holder | Adjustable drawbar | 385/65R22.5 | Subject to errors, typos, and prior sale. Tjdpfxszl Rqus Abvob

Condition: new, maximum load weight: 34,310 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Vehicle / Body: Trailer, container chassis, semi-trailer Unladen weight: 3,690 kg Todpfx Abok N Acuevob Overall length: 13,500 mm Width: 2,520 mm Saddle height approx.: 1,120 mm Further information: - 3-axle - Frame hot-dip galvanized including passivation - 1 x 45 ft with long gooseneck tunnel and angled front corners - 24-ton, 2-speed landing gear, single-sided operation - Aluminum side impact protection, galvanized steel underrun protection, extendable underrun protection for 45 ft containers - Plastic toolbox - Air suspension - 1st axle: automatic lift axle - Tires: 385/55 R22.5 - 2x 7-pin and 1x 15-pin sockets at the front From current production, delivery time approx. 3-4 weeks.

Condition: used, empty load weight: 3,149 kg, maximum load weight: 14,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2014, suspension: air, tire size: 245/70 R19,5 141J, color: black, Equipment: ABS, Permissible total weight: 18,000 kg, unladen weight: 3,140 kg, BPW axles, DUO-Matic air connection, twin tires, tow hitch pin diameter: 50 mm. Subject to modifications, prior sale, and errors. Tjdoxtpu Uspfx Abvob

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total height: 1,050 mm, Year of construction: 2026, Equipment: ABS, WF/W-18 445/45 19.5, turntable trailer for interchangeable bodies, for interchangeable bodies from 7.15 to 7.45 m Chassis designed for interchangeable bodies from 7150 to max. 7450 mm Chassis designed for rear alignment at 7150 mm (with drawbar buffer) CoC documents Lowering height approx. 1020 mm to max. 1320 mm Ground clearance approx. 1000 mm on level ground Axle loads: 18,000 kg (2 x 9000 kg) Unladen ride height approx. 1050 mm Coupling height (center) approx. 800 mm unladen Height adjustment device by means of 1 x tension springs Drawbar fork extendable, 600 mm, stepless adjustment Drawbar eye ø 40 mm Axles, brand manufacturer (SAF/BPW) Axle 9t, 19.5", disc brake, Air suspension unit, each with 9 tons load capacity, total stroke approx. 400 mm Coupling head, red and yellow EBS braking system, manufacturer Knorr or Wabco Tire pressure monitoring Brand-name tires 445/45 R 19.5 15-pole connector at the front Flashing SML (side marker light) Centering guide rollers (small), steel, 1 pair each in the middle and at the rear (removable) Plastic mudguards, 180 degrees Splash guard Continuous rear lamp panel Underrun protection in welded design (rectangular tube) 1 x chock with holder, plastic or galvanized 2 rubber drawbar buffers at the rear Tire pressure monitoring Flashing SML Painting of the chassis in RAL 9005 or Novagrau 7350, other colors at extra cost (only if available in powder coating) Hot-dip galvanizing Price ex works Attention!!! Pictures may show optional equipment Tsdpfxeg Dkx Ts Abvjb Get advice and have a free and non-binding offer prepared. Leasing, financing or hire purchase possible! We can accommodate your wishes! Please contact us - we will be happy to prepare an offer for you. Errors and prior sale excepted!!!

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, WEB-Trailer WFZ/W-18 235/75 17.5, Swivel-type demountable trailer, 400 mm lift, for demountable bodies C7.15 to C7.45 Chassis flush at the rear for demountable bodies, overall length 7150 mm Note: Maximum body length of 7450 mm permissible. Chassis designed for demountable bodies from 7150 to max. 7450 mm (symmetrical bodies) 2 outriggers with 4 retractable swivel pin locking mechanisms, 20" Arrangement for accommodating demountable platforms Spring center approx. 1100 mm Lowering height approx. 970 to 1220 mm Ground clearance approx. 930 mm on level ground Axle loads: 18,000 kg (2 x 9,000 kg) Riding height approx. 970 mm (unladen) Coupling height (center) approx. 730 mm unladen Front stop, foldable and adjustable for 7150 + 7450 mm symmetrical demountable platforms Lateral underrun protection, approx. 30 mm set inwards Lateral underrun protection on both sides Underrun protection in special width, approx. 2300 mm Approval/COC Free choice of manufacturer, axle from manufacturer, axle 9 tons, 17.5", drum brake, air suspension unit per 9 tons load capacity, with bellows diameter approx. 300 mm Total lift approx. 400 mm (without height limitation) Operating unit, lift and lower, on the left-hand side when facing the direction of travel Two-line pneumatic braking system, EC 71-320 EBS braking system, manufacturer's choice Brand-name tires 235/75 R 17.5 Tire pressure monitoring system Flashing side marker lights 15-pole lighting system, 24 volts, LED Plastic fenders, 180 degrees, above each axle Mud flaps, anti-spray Fender brackets in galvanized design Painting of the chassis in RAL color Cathodic dip coating with zinc phosphating plus powder coating, highest level of corrosion protection or hot-dip galvanized Price ex works Note!!! Pictures show optional equipment Get advice and have a free and non-binding offer prepared. Leasing, financing, or hire purchase possible! We can accommodate your wishes! Ask us - we will be happy to prepare an offer for you. Tedpfxeg Dkw Ss Abvjb Errors and prior sale reserved!!!

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total height: 1,100 mm, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center tube, central axle swap body trailer, tire size 22.5 Chassis designed for swap bodies from 7150 to max. mm Chassis designed for rear-flush mounting, mm (with impact buffer) Axle loads: 18,000 kg (2 x 9,000 kg) Support load approx. 1,000 kg Lowering heights approx. 1120/1220/1320 mm Coupling height approx. 400 mm unladen Riding height unladen approx. 1100 mm Ground clearance approx. 1070 mm Front stop, foldable and adjustable for 7150 1 set of rear support legs, height adjustable 1 set of front support winches, single-sided operation (operation "right") Fixed drawbar (center tube) with bolted drawbar eye Drawbar eye ø 50 mm Free choice of axle manufacturer via WEB Trailers (SAF/BPW/JOST) Axle with large disc brake Tedpfx Abog Dky Asvjb Axle 9 tons, 22.5" disc brake Lifting and lowering device with 1 rotary spool valve Axle distance approx. 1360 mm Air suspension, total travel approx. 400 mm Lifting and lowering device mounted on the rear left side in the direction of travel Coupling head, red and yellow Spiral cable and hoses for light and brake connection, with mounting plate 15-pin plug Lighting system 24 volts with large multi-function light Tire pressure monitoring system flashing SML Reversing lights (LED) centered under the rear stop Reversing lights (LED) at the very front under the stop EBS braking system, manufacturer Knorr or Wabco, at our discretion, with RSS Tires 385/55 R 22.5, brand-name manufacturer to be chosen by WEB-Trailer on -Rim 11.75 x 22.5 Contour marking (white on the side, red on the rear) Centering guide rollers (small), steel, 1 pair each in the middle and at the rear (removable) 2 rubber impact buffers at the rear corners Plastic mudguards, 180 degrees Splash guard Lateral impact protection on both sides, steel profile or plastic Prepared for E-wheel holder Approval COC papers Painting of the chassis Hot-dip galvanized Price ex works Attention!!! Pictures show optional equipment Get advice and have a free, no-obligation offer prepared. Leasing, financing or hire purchase possible! We can accommodate your requests! Ask us - we will gladly prepare an offer for you. Errors and prior sale reserved!!!