Used Krone Box Trailers for sale (1,341)

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, Brand new Krone SDK 27 2-axle box semi-trailer * Semi-trailer height unloaded 1,150 mm * 13 pairs of lashing rings embedded in the floor * 4 pairs of ship fastening straps * Rear sliding step ladder * 2 mechanical support winches * Wheelbase 1,310 mm * Krone axles with air suspension and disc brakes * Air suspension with lifting and lowering device incl. automatic ride height reset * Axle cap KM counter * 4 tires 386/65 R 22.5 * Spare wheel holder * Wabco brake system * 2 wheel chocks * LED multifunction rear lights * incl. 1 reversing light * 1 plastic tool box * 30 mm thick waterproof glued panel floor * Side walls in sandwich construction with steel top layer * 2 rows of anchor rails Fodovw Hnqspfx Aa Rjft * Insulated roof * 6 LED ceiling lights * Certificate for load securing according to EN 12642 Code XL Paintwork * Steel parts steel blasted, KTL-primed and powder-coated * Chassis RAL 9005 deep black * Axles incl. wheel hubs RAL 9005 deep black * Silver natural rims For further information please do not hesitate to contact us

Condition: used, Year of construction: 2012, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7,450 mm, rear roller shutter used. Smooth steel swap body with aluminium roller shutter, ready for use. Body lettering removed, technically inspected and supplied with new UVV (accident prevention regulation). Interior keyhole system. New paintwork available on request. All stated values are approximate measurements in mm and kg. Delivery possible. Offer is subject to prior sale and without obligation. Fjdpfx Aajqkdavs Reft Prices are net ex location D-59558 Lippstadt-Rixbeck. You can find additional equipment at . .

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, Vehicle information ? Length: 13,860 mm ? Height: 4,000 mm ? ? width: 2,550 mm ? Load compartment length (inside): 13,620 mm ? Load compartment height (inside): 2,715 mm ? Load-through height in the rear portal: 2,630 mm ? Load compartment width (inside): 2,480 mm ? Semi-mounted height: 1,150 mm ? Permissible total weight: 36,000 kg ? Unladen weight: 7,200 kg Ffsdpfx Aaolxwr Is Rot _____ Axles ? Krone axles with disc brakes ? Tire brand: No brand 385/65 R22.5 ? 1st axle Lift axle ? ABS ? ? Air suspension ? ? steel rims ? Mechanical supports ? Knorr brake position ? Wheel chocks _____ Body / add-on parts ? Side collision protection Open ? Tail lift, make: BÄR vertical, load capacity: 2000 KG ? Platform of the tail lift at full height ? with 2-fold roll-off protection ? Battery supply via SmartCharge (7-pin) ? 1 toolbox ? 2 row(s) of horizontally recessed slot-and-hole lashing rails ? Attachment: Height center 1st lashing row above floor 800 mm ? Attachment: Height center 2nd lashing row above floor 1600 mm _____ Floor ? 30 mm thick waterproof panel floor ? Floor loads of up to 7,000 kg forklift axle load ? Premium visual sealing ? 13 pairs of lashing rings embedded in the floor ? Forklift collision protection inside on front wall, approx. 250 mm high _____ Lighting / electrics ? Side marker lights (flashing function) ? 2 LED license plate lights ? 2 clearance lights with rubber arm, LED version ? Lighting carrier designed for tail lift operation ? 3-chamber tail lights ? 6 LED ceiling lights _____ Paintwork ? Chassis: RAL 9005 - deep black ? Body: RAL 9010 - pure white ? Axle hub: RAL 9005 - jet black ? Rims SILVERNATUR ? Load securing certificate in accordance with EN 12642 Code XL ? Certificate for load securing according to Daimler guideline 9.5 ? Certificate for load securing for beverage transportation (VDI 2700 Bl. 12) ? ADR approval certificate EX/II without FL, AT, MEMU

Condition: used, Year of construction: 2007, color: white, overall weight: 18,000 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, rear portal doors, double-decker and keyhole plates smooth steel swap body, portal doors with external espagnolette locks,\n\n\ntypical signs of use, 1 door wing at the rear heavy rust from the outside, stops and grazing damage but tight (see also photos for condition)\nWell suited for storage purposes\n\nInternal keyhole plates and double-decker system.\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\nDouble-decker, without beams. Fodpfxern T Ags Aa Reft

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, Vehicle information ? Length: 13,860 mm ? Height: 4,000 mm ? ? width: 2,550 mm ? Load compartment length (inside): 13,620 mm ? Load compartment height (inside): 2,715 mm ? Load-through height in the rear portal: 2,630 mm ? Load compartment width (inside): 2,480 mm ? Semi-mounted height: 1,150 mm ? Permissible total weight: 36,000 kg ? Unladen weight: 7,200 kg _____ Axles ? Krone axles with disc brakes ? Tire brand: No brand 385/65 R22.5 ? 1st axle Lift axle ? ABS ? ? Air suspension ? ? steel rims ? Mechanical supports ? Knorr brake position ? Wheel chocks _____ Body / add-on parts ? Side collision protection Open ? Tail lift, make: Dautel, vertical, 2,000 kg ? Platform size approx. 2520 x 2200 ? top flap above the tail lift ? with 2-fold roll-off protection ? Battery supply via SmartCharge (7-pin) ? 1 toolbox ? 2 row(s) of horizontally recessed slot-and-hole lashing rails ? Attachment: Height center 1st lashing row above floor 800 mm ? Attachment: Height center 2nd lashing row above floor 1600 mm _____ Floor ? 30 mm thick waterproof panel floor ? Floor loads of up to 7,000 kg forklift axle load ? Premium visual sealing ? 13 pairs of lashing rings embedded in the floor ? Forklift collision protection inside on front wall, approx. 250 mm high _____ Lighting / electrics ? Side marker lights (flashing function) ? 2 LED license plate lights ? 2 clearance lights with rubber arm, LED version ? Lighting carrier designed for tail lift operation ? 3-chamber tail lights ? 6 LED ceiling lights _____ Ffjdpfxottd D Nj Aa Rot Paintwork ? Chassis: RAL 9005 - deep black ? Body: RAL 9010 - pure white ? Axle hub: RAL 9005 - jet black ? Rims SILVERNATUR ? Load securing certificate in accordance with EN 12642 Code XL ? Certificate for load securing according to Daimler guideline 9.5 ? Certificate for load securing for beverage transportation (VDI 2700 Bl. 12) ? ADR approval certificate EX/II without FL, AT, MEMU

Condition: used, Year of construction: 2008, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7,450 mm, with roller shutter, branded smooth steel wall swap body with aluminum roller shutter.\ntechnically inspected and provided with new UVV, \nroller shutter and rope repaired,\nwhile stocks last, \nnew paint finish in desired color on request\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time after consultation\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Fsdpfxjtyphvj Aa Rsft

Condition: new, color: white, overall weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 45.7 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, Swap body, plywood BDF system, 7,450 mm long. Brand new plywood swap body, BDF system, 7,450 mm long. Rear portal doors with internal espagnolette locks. External dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,750 mm. Parking height: 1,320 mm. Total weight: 16,000 kg, empty weight: 2,400 kg. Support legs in RAL 9010 pure white and rigid. 2 rows of combination / slotted-hole lashing rails mounted horizontally on the side walls. Installation: Height of center of 1st lashing row above ground: 800 mm and height of center of 2nd lashing row above ground: 1,600 mm. Incl. 2 locking beams for combination / slotted-hole lashing rails. Includes load securing certificate according to EN 12642 Code XL. 27 mm thick, waterproof plywood floor, strength according to EN 283, for floor loads up to a maximum of 5,460 kg forklift axle load. Sliding stepladder at the rear. All specified values are approximate dimensions in mm and kg. Delivery date upon request. Leasing possible. Delivery possible. This offer is subject to change without notice and subject to prior sale. Net prices ex location, D-59558 Lippstadt-Rixbeck. You can find further objects at . . Ffjdpfx Aastu Nqae Rot

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, paint NEW in Premium Plus Used smooth steel swap body BDF system 7,450 mm long, rear with aluminum roller shutter.\nInternal keyhole system in the side walls.\n\nPREMIUM-PLUS refurbishment:\n- Premium 2 K paint finish - high-gloss - here in RAL 9010 white\n- Underbody blasted, primed and repainted in the body color\n- New roller shutter cables\n- New rubber seals on the roller shutter\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom along the entire length\n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Fjdpfxeuzlxmj Aa Rsft

Condition: new, Year of construction: 2025, color: white, overall weight: 2,710 kg, empty load weight: 16,000 kg, loading space volume: 45.6 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,525 mm, Swap body, insulated BDF system 7,450 mm, portal doors, BRAND NEW Brand new insulated swap body, BDF system 7,450 mm long, high portal doors with double internal espagnolette locks at the rear. Body in RAL 9010 pure white. Telescopic support legs in RAL 9005 black, for storage heights of 920 - 1,320 mm. Side walls, front wall, and roof in sandwich construction with steel covering layer, painted on the outside, PVC-coated on the inside. Panel thickness: front wall: 50 mm / roof: 30 mm / side walls: 30 mm. Interior fittings as follows: - 27 mm thick, waterproof glued plywood floor, strength according to EN 283. For floor loads up to 5,460 kg forklift axle load. - Forklift collision protection on 3 sides, approx. 300 mm high. - 9 pairs of lashing rings in the outer frame. - 2 rows of slotted-hole lashing rails, horizontally recessed with 2 locking bars. - NO double-deck system (contrary to the photos). - 3x crown LED ceiling lights\n\nIncludes load securing certificate according to EN 12642 Code XL\n\nDelivery date upon request. \nDelivery possible. Leasing possible.\n\nAll values given are approximate dimensions in mm and kg.\nThis offer is subject to change without notice and prior sale.\nPrices are net ex location, D-59558 Lippstadt-Rixbeck. \nYou can find further items at . . Ffjdpfxett D Rwo Aa Rot

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, premium paint NEW in white Used steel - smooth wall swap body BDF system 7,450 mm long, rear with aluminum roller door.\nInside keyhole system in the side walls.\n\nPREMIUM refurbishment:\n- Premium 2K paint - high gloss in RAL 9010 white\n- Underbody blasted, primed and repainted in RAL 9010 white\n- Support legs repainted in RAL 9010 white\n- Structure completely overhauled with new UVV\n- Roof painted 40 cm all around - rest sprayed\n- Scrub base rolled in gray\n- New galvanized ladder\n- New galvanized gill plates installed after painting\n- Contour marking on the bottom side of the entire length in white\n- Contour marking on the rear in the corners in red\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Ffsdpfx Aevm Dfxea Rst

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth wall swap body, BDF system, 7,450 mm long.\nBody newly painted in RAL 7040 window gray. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is non-binding, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Fodpfspg Dtcjx Aa Reft

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,890 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, smooth steel BDF system 7.45m, rear roller shutter, branded smooth steel wall swap body with aluminum roller shutter, usable, \nBody de-inscribed, technically checked and provided with new UVV, \nAs long as stocks last, \nNew paint finish on request\n\nAll values given are approximate dimensions in mm and kg.\nDelivery possible. \n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Ffodpfxjtw Edhe Aa Ret

Condition: used, Year of construction: 2011, color: green, overall weight: 16,000 kg, empty load weight: 3,140 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, corrugated steel BDF system 7.45, NEW PAINT in RAL 6024, BRAND NEW portal doors * Structure completely blasted, primed and NEW PAINTED in RAL 6024 traffic green or RAL color as desired.\n* Substructure blasted, primed and painted in body color.\n \n* Installation of brand new aluminum double-leaf doors with galvanized espagnolette locks and new rubber seals.\n\n* Brand new telescopic support legs in black,\n* Forklift pockets, corner locks in the roof - stackable,\n* Inside keyhole plates in the corrugations\n* Wooden floor\n* new UVV\n\nDents behind the keyhole plates unavoidable - some present as used.\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Ffjdpjvzb Ruefx Aa Rst

Condition: new, color: white, empty load weight: 16,000 kg, loading space volume: 56.3 m³, loading space width: 2,470 mm, loading space length: 7,670 mm, loading space height: 2,970 mm, Swap body, smooth steel BDF system, 7,820 mm long, FACTORY NEW! Brand-new smooth-walled steel swap body, BDF system 7,820 mm long, corner height: 3,125 mm.\n\nRear portal doors with double interior espagnolette locks.\n\nBody in RAL 9010 pure white. Telescopic ZINC-plated support legs for storage height 920 - 1,120 mm.\n\nInterior fittings as follows:\nRoof made of trapezoidal profiled sheet steel.\n21 mm thick, waterproof glued screen printing plate floor, strength according to EN 283\nfor floor loads up to 5,460 kg forklift axle load.\n\nForklift collision protection on 3 sides, approx. 360 mm high.\nSide walls above scuff rails with recesses for bulk material drainage\nSide walls inside with wooden paneling and \nSide walls inside with keyhole plates over the entire surface \n\nIncluding load securing certificate according to EN 12642 Code XL\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Fsdpfx Aaotybtwo Roft

Condition: used, Year of construction: 2008, color: silver, overall weight: 3,100 kg, empty load weight: 16,000 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, steel Combi-Box BDF system 7.450 mm long, LACK NEW in white aluminum Steel swap body, Combi-Box, rear portal doors with internal espagnolette locks,\nWell preserved,\nDriving direction left sliding tarpaulin with steel insert slats with 3 rows of combination anchor rails, 2 slides,\nFRight smooth steel cassette with keyhole plate with 3 rows of combination anchor rails and lashing points in the scuff plate,\n\n- steel roof and wooden floor, \n\n- body and underbody NEW PAINTED in RAL 9006 white aluminum, support legs NEW telescopic in black, \n\n- body completely checked and repaired\n\n\n-UVV test\n\nAll values given are approximate dimensions in mm and kg.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found under . Steel/aluminum insertion slats. Fjdpjvf Ngrjfx Aa Roft

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 45.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,500 mm, Swap body, corrugated steel BDF system 7.45, NEW PAINT, BRAND NEW portal doors * Structure completely blasted, primed and NEW PAINTED in RAL 9010 white or RAL color as desired.\n* Substructure blasted, primed and painted in body color.\n \n* Installation of brand new aluminum double-leaf doors with galvanized espagnolette locks and new rubber seals.\n\n* Brand new telescopic support legs in black,\n* Forklift pockets, corner locks in the roof - stackable,\n* Inside keyhole plates in the corrugations\n* Wooden floor\n* Access ladder at the rear\n* New UVV\n\nDents at the back of the keyhole plates unavoidable - some present as used.\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request. Delivery possible.\n\nThe offer is subject to change and prior sale.\nPrices net from location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Fjdpevxvv Tefx Aa Rjft

Condition: used, color: light blue, overall weight: 16,000 kg, empty load weight: 3,250 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, PAINT NEW Used and refurbished smooth steel swap body, BDF system, 7,450 mm long.\nBody NEW PAINTED here in RAL 5015 sky blue. \nHigh portal doors at the rear with external espagnolette locks.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,480 mm.\nTotal weight: 16,000 kg. Empty weight: 3,250 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step pull-out ladder\nincl. new foam rubber seals on the portal doors\nincl. 7 steel plates on the sides and front wall as well as new sealing seam all around, \nto prevent corrosion \nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Ffsdpfopguzpsx Aa Ret

Condition: used, color: black, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished steel smooth-wall swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 9005 deep black. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Fjdpspg Edfsfx Aa Reft

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-wall steel swap body, BDF system, 7,450 mm long.\nConstruction here newly painted in RAL 9010 pure white or RAL color upon customer request\nAluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 jet black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInner height: 2,550 mm. Loading height at the rear: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior fittings:\nKeyhole sheet metal embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scrubbing base\n(varies depending on the model, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint in one of 212 RAL colors of your choice\n(Please use our overview of all available RAL colors on our homepage)\nRoof approx. 40 cm painted all around (ATTENTION: No complete roof painting! We can gladly offer you roof painting for an additional charge.)\nBlasting work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new fall protection devices\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel cables on the roller door\nincl. new side and floor seals on the roller door\nincl. 7 steel sheets on the sides and on the front wall as well as new sealing seam all around,\nto prevent corrosion\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\n\nDelivery date on request.\n\nThe offer is subject to change and subject to prior sale.\nPrices net from location D-59558 Lippstadt-Rixbeck.\nYou can find more objects at pstä.\n . Fjdpfjt Sxkvsx Aa Rsft

Condition: used, color: red, overall weight: 16,000 kg, empty load weight: 2,950 kg, loading space volume: 48.8 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,695 mm, Swap-body platform, drop-sides with tarpaulin Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long. baked Swap-body platform with drop-sides and tarpaulin, BDF system, 7,450 mm long.\n\nExternal dimensions: L = 7,450 mm, W = 2,550 mm, H = 2,950 mm. Parking height: 1,120 mm\nTotal weight: 16,000 kg. Unladen weight: 2,950 kg.\n\nSwap-body platform as storage container. \nPartial rust on parts of the swap-body platform. Usual signs of use, deformations, stops and damage. Body in RAL 3003 ruby red with neutralized lettering.\n\nImmediately available. Multiple available. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Fjdpfxopgty Es Aa Roft

Condition: used, color: grey, overall weight: 16,000 kg, empty load weight: 3,160 kg, loading space volume: 45.3 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,500 mm, Swap body, steel smooth BDF system 7.45m, paint NEW standard version with 2K paint, gray or desired color used steel smooth-wall swap body, BDF system 7.45m, rear with aluminum roller shutter, refurbished \nBody NEW PAINTED in standard version - here in grey, - standard RAL colors available on request,\nUnderbody blasted and provided with underbody protection, \nNew telescopic or fixed support legs, \nBody with new sealing seam - also painted in body color,\nNew rubber seals on roller shutter\nNew current UVV\nSlight scarring from blasting may still be visible in standard version\nFor premium paint finishes, please contact us!\n\nInternal keyhole system in the side walls or lashing rails.\n\nAdditional price for wooden or plastic base plates with bracket\n\nWhile stocks last or delivery time on request if not directly available. \n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties at .\n\n\n . Fedpeqdai Hjfx Aa Rsft

Condition: used, Year of construction: 2009, color: blue, overall weight: 16,000 kg, empty load weight: 2,980 kg, loading space volume: 46.4 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system 7,450 mm long, LACK NEW, Premium plus! used steel swap body, BDF system 7,450 mm long. \nSmooth side walls, portal doors at the rear with external espagnolette locks.\nInside keyhole system\n\nFinished in PREMIUM PLUS version: \n\n- Premium 2 K paint finish - high-gloss, here in RAL 5005 signal blue or RAL color as requested\n- Underbody blasted, primed and repainted in body color\n- New roller shutter cables\n- New rubber seals\n- New support legs - fixed or telescopic\n- Superstructure overhauled with new UVV\n- Roof painted all around 40 cm - rest with fogging\n- Scuff plate rolled in grey\n- New galvanized access ladder\n- New galvanized gill plates fitted after painting\n- Contour markings on the sides at the bottom, full length \n- Contour markings at the rear in the corners\n\nAll values given are approximate dimensions in mm and kg.\nDelivery time on request.\nDelivery possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore properties can be found at . . Ffsdpouwtbnsfx Aa Ret

Condition: used, color: green, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, LACK NEW! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nIncluding SIDE DOOR (1.15 x 2.0 m)\n\nBody repainted here in RAL 6011 Reseda green. Other RAL colors available on request.\n\nAluminum roller shutter at the rear.\nIncl. brand new support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nInterior fittings:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff base \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice \n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We are happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrubbing base, rolled inside\nIncl. brand-new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nincl. galvanized new 4-step extension ladder\nincl. new rope anchor plates and steel ropes on the roller shutter door\nincl. new side and bottom seals on the roller shutter door\n\nincl. UVV functional test certificate\n\nAll values given are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nFor further objects, please see pstä. . Fodpfx Ast E T Nmea Roft

Condition: used, Year of construction: 2009, color: white, empty load weight: 3,280 kg, loading space volume: 49.1 m³, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,700 mm, Swap body, smooth steel BDF system 7,450 mm, NEW PAINT, corner height: 2,900 mm, used and refurbished smooth steel swap body, BDF system, 7,450 mm long.\n\nRear portal doors with external espagnolette locks at the rear.\n\nRefurbishment:\n• NEW PAINT - high gloss in RAL 9010 white\n• Underbody blasted, primed and provided with underbody protection\n• New telescopic support legs in RAL 9005 black,\n• New rubber seals on the doors\n• Body completely overhauled with new UVV\n• Roof painted 40 cm all around - rest sprayed\n• New galvanized ladder\n\nInterior:\nFurniture: plywood paneling and 5 rows of strips.\nScreen-printed floor.\n\nAll values given are approximate dimensions in mm and kg.\n\nDelivery date on request. \n\nThe offer is subject to change and prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects at pstä.\n . Ffjdpfxovnu Efs Aa Rjt

Condition: used, color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space volume: 46.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,550 mm, Swap body, smooth steel BDF system, 7,450 mm long, NEW PAINT! Used and refurbished smooth-walled steel swap body, BDF system, 7,450 mm long.\nBody repainted in RAL 9010 pure white. Aluminum roller shutter at the rear.\nIncl. brand new rigid support legs in RAL 9005 deep black. Parking height: 1,320 mm.\n\nExternal dimensions: L=7,450 mm, W=2,550 mm, H=2,750 mm.\nInternal height: 2,550 mm. Rear load-through height: 2,380 mm.\nTotal weight: 16,000 kg. Empty weight: 2,860 kg.\n\nInterior equipment:\nKeyhole plate embedded in the side walls.\n25 mm thick screen-printed floor.\n7-9 pairs of lashing rings embedded in the floor or scuff plate \n(varies depending on the version, not every swap body is equipped with lashing rings).\n\nOur services:\n\nNew 2K high-gloss paint finish in one of 212 RAL colors of your choice\n(You are welcome to use our overview of all available RAL colors on our homepage)\nRoof painted approx. 40 cm all around (ATTENTION: No complete roof painting! We would be happy to offer you a roof paint job for an additional charge.)\nScrubbing work and cleaning of the underbody\nUnderbody provided with underbody protection\nScrub base, rolled on the inside\nIncl. brand new support legs, rigid or telescopic in RAL 9005 jet black\nIncl. galvanized new safety catches\nIncl. galvanized new 4-step extension ladder\nIncl. new cable anchor plates and steel cables on the roller shutter door\nIncl. new side and bottom seals on the roller shutter door\nIncl. 7 steel plates on the sides and front wall as well as new circumferential sealing seam\nIn order to prevent corrosion\nIncl. UVV functional test certificate\n\nAll stated values are approximate dimensions in mm and kg.\nDelivery date on request. Delivery possible.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck.\nYou can find more objects under pstä.\n . Ffedspg Eczepfx Aa Rot