Used Wielton Trailers for sale (73)

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Equipment: ABS, New vehicle / stock vehicle / incoming? Also available with custom configuration / from €22,700 -- For sale is a Wielton container chassis, suitable for professional use in container and roll-off container transport. Chedpfsypa A Nox Altja Note: The specifications listed below refer to a current stock or pre-ordered vehicle. Deviations may occur depending on the specific vehicle, production status, or individual customer configuration. ---- Chassis - Steel construction made from high-strength S700 steel - 2 SAF axles, disc brakes 19.5”, axle load 9,000 kg per axle - Air suspension - Steel air tanks - Additional return spring for drawbar - Loading platform for container transport, internal length 6,000–7,000 mm, compatible with DIN 30722 - Pneumatic container locking - Mechanical container locks - Foldable side underrun protection according to ECE R73 - Steel underrun protection according to ECE R58 - Rear impact protection blocks, steel - Drawbar 2,400 mm, with rubber buffer - Towing eye Ø 40 mm ---- Chassis Accessories - 2 plastic wheel chocks with holder - Large rear impact buffers - Side underrun protection according to ECE - Rear underrun protection made of steel - 4 PVC half-shell mudguards with antispray system - 1 PVC toolbox - 1 mesh box ---- Brake System - Brake system according to ECE - WABCO EBS 4S/2M with Roll Stability System (RSS) - ADR-compliant - Standard pneumatic connections ---- Electrical System - 24-volt system according to ECE - LED lighting: * Brake light * Position lights * Side marker lights * License plate illumination * Multi-chamber tail lights (tail light, indicator, fog light) - 2×7-pin or 1×15-pin, incl. EBS connector ---- Tyres - Twin tyres 265/70 R 19.5 (8 units) - Twin spare wheel (2 units) - Premium tyre brand (e.g., Bridgestone or equivalent, manufacturer's choice) - Steel rims ---- Painting - All steel parts double sand-blasted - KTL primer for optimal corrosion protection - Dust-free robotic topcoat - Frame: RAL 7021 black grey - Drawbar: RAL 7021 black grey - Axles: black - Rims: silver - Wheel hubs: black - Side underrun protection: white - Rear light carrier: white - Underrun protection: white ---- Further equipment and individual customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, maximum load weight: 29,839 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 12,512 mm, loading space width: 2,402 mm, loading space height: 2,250 mm, loading space volume: 62 m³, total width: 2,550 mm, total height: 3,714 mm, Equipment: ABS, New vehicle / stock vehicle / incoming? Also available in various capacities / from €49,800 -- For sale is a Wielton Scrap Master tipping semi-trailer, 62 m³, designed for heavy-duty use in scrap, recycling, and bulk transport operations. Depending on the specification, the Scrap Master is available with a body volume of approximately 51 m³ to 62 m³. Note: The equipment listed below describes a current stock or pre-ordered vehicle. Dimensions, weights, capacities, and features may vary depending on the vehicle, production status, or individual customer configuration. --- Dimensions / Weights * Overall length: 13,752 mm * Internal length: 12,512 mm * Overall width: 2,550 mm * Internal width (center of body height): 2,402 mm * Internal width at upper frame: 2,234 mm * Internal height: 2,250 mm * Overall height at upper frame: 3,578 mm * Overall height to tarpaulin peak: 3,714 mm * Track width: 2,040 mm * King pin – 2nd axle distance: 8,135 mm * Rear overhang: 2,532 mm * Floor height: 1,325 mm * Max. height with body tipped: 11,092 mm * Gross weight: 36,000 kg * Technical gross weight: 39,000 kg * Axle load: 8,000 kg (technically 9,000 kg) * Fifth wheel load: 12,000 kg * Loading capacity: approx. 62 m³ * Manufacturer’s designation (homologation): NW-3 * Unladen weight: approx. 9,161 kg (weight value with ±3% tolerance) --- Chassis / Technology * Steel underrun protection * Foldable rear underrun guard * Unladen saddle height: approx. 1,150 mm * SAF disc brake axles, 3 × 9,000 kg, 22.5" INTRADISC CD * 1st axle as a lift axle Chodpjypa Ixefx Altoa * 6 × ALCOA DURA-BRIGHT aluminum rims, 22.5 × 11.75, offset 120 * 6 × 385/65 R 22.5, premium tire brand (manufacturer at choice) * 165 l toolbox, mounted left center * 30 l water tank, mounted right center --- Body / Tipping Body * Combination door variant * Volume: 62 m³ * Front wall inclined at 20° * Double wing door ( ? + ? ), vertical, without portal cross beam * Internal height: 2,250 mm * Floor: 5 mm, side walls: 4 mm HARDOX 500 TUF * Operator platform at front wall, left-hand side ascent in direction of travel --- Cover * PVC roll tarp, 680 g/m² * Quick release * Aluminum winding rod --- Brake System / Pneumatics * Aluminum air tank * Spring pressure gauge * Automatic lowering when tipping, can be deactivated * WABCO brake system 2S/2M --- Hydraulics * HYVA hydraulic cylinder * Tipping angle indicator --- Electrics * Full LED lighting * 2 LED reversing lights * 2 × 7-pin + 1 × 15-pin, incl. EBS connection (without link cables to tractor unit) * LED lighting Aspöck ECOLED II with flashing side marker lights --- Additional Systems * TPMS sensors (tire pressure and temperature) --- Paintwork * Chassis: RAL 7021 black grey * Body: RAL 9006 white aluminum * Tarpaulin: RAL 9006 white aluminum --- Other volumes (approx. 51–62 m³), equipment options, and individual customizations are always available – we will configure your vehicle exactly according to your requirements. Sample image. Equipment may vary depending on configuration.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / in transit? Also available with different body volumes / from €30,900 -- For sale is a Wielton Strong Master tipper semi-trailer, 26 m³, designed for heavy-duty use in bulk material, construction, and asphalt transport. Depending on the configuration, the Strong Master is available with body volumes from approx. 26 m³ to 42 m³. Note: The equipment listed below describes a current stock or pre-ordered vehicle. Body volume, configuration, and equipment may vary depending on the vehicle, production status, or individual customer specification. -----Chassis 3 SAF axles, each 9,000 kg, disc brakes 22.5”, ET120, brake discs Ø 430 mm * Axle lift on 1st and 3rd axles, automatic / pneumatic * Control line for lift axle (push-button operation / starting aid) * Raising and lowering of the chassis via HS valve * Automatic lowering when tipping, can be deactivated * Fifth wheel plate with 2” kingpin according to SAE standards, replaceable * 2-speed landing gear SAF Hercules * Side underrun protection made of aluminium profiles according to ECE R73 * Rear underrun protection made of steel according to ECE R58, foldable, suitable for road pavers * Saddle height unladen approx. 1,250 mm -----Brake system / Pneumatics WABCO braking system 2S/2M * Spring pressure gauge * Aluminium air tanks * Automatic lowering when tipping, can be deactivated -----Electrics Full-LED lighting Aspöck ECOLED II * Flashing side marker lights * 1 LED reversing light * 2 × 7-pin + 1 × 15-pin connectors, incl. EBS connection (without connection cables to tractor) -----Wheels and tyres 6 × steel rims 11.75 × 22.5, ET120 * Nut protection caps * Tyres 385/65 R 22.5 Chodsypa N Ajpfx Altoa * BRIDGESTONE Duravis RT002 -----Body / Tipper Half-pipe body made of HARDOX HB 450 * Tapered trough * Side panels 3 mm * Floor 4 mm * Front wall angled at 20° * Control platform at front wall, access ladder on left in direction of travel * Wielton logo on the side panels * Rear wall as steel swinging gate, overlapping, with double pivot bearing * Replaceable rubber seal * Rear wall locking: * 2 manual side tensioners * 2 automatic lower hook locks * Hydraulic connection kit 1 * Binotto hydraulic cylinder, top eye mounting * Tension chain bracing between side panels -----Tarp PVC rolling tarpaulin, 680 g/m² * Quick-release fastener * Aluminium roller tube * With triangular extension at front and rear * Welded-in central tube for vertical rear end -----Other equipment Aluminium ladder * 44 l toolbox, front-mounted * 30 l water tank * Shovel and broom * Hot-dip galvanising -----Paintwork Body painted in RAL 9006 white aluminum * Tarpaulin in RAL 9006 white aluminum * All steel parts shot-blasted twice before painting -----Additional systems Control line for lift axle from driver’s cab * ABERG TPMS tyre pressure and temperature monitoring * Sensors on all rims * Control unit connected to EBS -----Other body volumes (approx. 26–38 m³), equipment, and customized options available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may differ depending on configuration.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / incoming? Also available as MEGA variant / from €24,200,-- For sale is a Wielton Platform Master semi-trailer, designed for heavy-duty and flexible use in construction materials, steel, and long-length cargo transport. The vehicle is available in standard trailer height, and optionally as a MEGA version. Note: The following equipment specification refers to a current stock or pre-ordered vehicle. Variations depending on the vehicle, production status or individual customer configuration are possible. ----Chassis / Frame Frame as double longitudinal beam with welded cross members and side rail * Welded construction from high-strength S700 steel * Perforated outer frame with continuous lashing options * SAFETY LOCK system: approx. 60 lashing holes per side * Designed for a coupling height of 1,120 mm (MEGA version with reduced coupling height optionally available) * 19 pairs of lashing rings, each rated at 2.0 t, integrated in the side rail * 26 stake pockets, 81 × 81 mm, as per drawing * Workspace according to ISO 1726:2003, weight-optimized construction ----Axles and Running Gear 3 axles, each with 9,000 kg load capacity * SAF axles with air suspension and disc brakes (ET120) * Brake discs Ø 430 mm * 1st axle is lift axle * 2" king pin, corner dimension 2,040 mm * 2 mechanical landing legs, brand SAF * Single-sided landing leg operation, right side ----Chassis Accessories 2 plastic wheel chocks with holder * Extendable rear access ladder with large tread surface, UVV compliant * Large rubber impact buffers, rear, side reinforced with steel, at rear frame * Side underrun protection as per ECE R73, made of lightweight composite material * Rear underrun protection, steel, according to ECE R58 * Full PVC mudguards * 2 PVC toolboxes, each 165 l * 12 removable stakes, 80 × 80 mm, length 1,500 mm * 12 stake holders * Spare wheel holder omitted * Extendable widening panels ----Braking System / Pneumatics Brake system according to ECE directive * Two-line compressed air brake system, make WABCO, ADR-compliant * EBS system WABCO 2S/2M with RSS * Raise and lower system * Brake line connections at front bulkhead * Standard air connections as per ISO * Aluminium air tanks ----Lights and Electrics Composite lamp carrier * Lighting system 24 V according to ECE R48, brand Aspöck EP III * 2 seven-chamber multifunction rear lights * LED license plate lighting * 2 LED outline marker lights * LED side marker lights * 2 × 7-pin + 1 × 15-pin sockets at front incl. EBS socket (without connection cables) Chodpfx Aleypa Aijtsa * Electrical installation and preparation for amber warning beacon * 2 additional LED reverse lights ----Wheels and Tyres 6 x 385/65 R 22.5 tyres * 6 × steel rims 11.75 × 22.5, ET120 * Premium tyres BRIDGESTONE ECOPIA H002 M+S * Wheel nut covers ----Floor 30 mm anti-slip phenolic plywood, multiple bonded, non-slip and waterproof, premium brand Koskisen * Sealed cut edges * Full perimeter caulking * Forklift rated up to 7,500 kg axle load ----Superstructure Bulkhead 1,800 mm high * Bulkhead and front corner posts in natural aluminium ----Paint / Colour Details All steel parts double shot-blasted * KTL primer for optimum corrosion protection * Dust-free robot top coat * Frame: RAL 7021 black grey / anthracite * Landing legs: black, powder coated * Axles: black * Rims: silver * Wheel hubs: black * Side underrun protection: white * Rear lamp carrier: white * Underrun protection: white

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / incoming unit – also individually configurable / from €29,900 For sale: Wielton construction material semi-trailer, designed for professional use in the transport of building materials and general cargo. Note: The following equipment list describes a current stock or pre-ordered vehicle. Deviations may occur depending on the specific vehicle, production status, or individual customer configuration. Chassis Load floor made of 30 mm phenolic resin-coated plywood, load capacity 7.5 t * Steel lamp bracket, 371 mm * 19 pairs of lashing rings, each rated at 2.0 t * Rubber-steel impact bumpers at rear * Foldable rear underrun protection * Rear underrun protection in steel * Side underrun protection in aluminium Axles and Suspension 3 rigid axles * SAF disc brake axles, 3 × 9,000 kg, 22.5" INTRADISC * 1st axle liftable Codpfxeypa A As Altoha * No axle lift on the 3rd axle * Fifth wheel height approx. 1,120 mm Landing Legs SAF Hercules two-speed landing gear, full load Mudguards PVC mudguards, quarter shell type, 2 front / 2 rear Rims 6 × steel rims 22.5 × 11.75, ET-120 * Nut covers for wheel bolts * No spare rim Tyres 6 × 385/65 R22.5, manufacturer’s choice Options: * GOODYEAR KMAX G2 T M+S 3PMSF, Rolling resistance: B | Wet grip: C | Noise: 71 dB * BRIDGESTONE Ecopia H-TRAILER 002 M+S 3PMSF, Rolling resistance: A | Wet grip: B | Noise: 68 dB * No spare tyre Other Chassis Equipment 2 × toolboxes, each 165 l * Spare wheel holder * Extendable width indicator boards Body Bulkhead H = 1,800 mm, with galvanized steel cover up to top edge * Side walls 1,000 mm * Bolt-on side walls * Foldable rear side wall Braking System / Pneumatics WABCO braking system with basic modulator * RSS / RSP * Aluminium air tanks * RTR automatic self-levelling * Braking system WABCO or Knorr with H-S-valve Electrical System Full LED lighting Aspöck ECOLED II * Flashing side marker lights * 2 LED reversing spotlights * 2 × 7-pin + 1 × 15-pin, incl. EBS connection * No connecting cables to tractor unit Paintwork / Surface Frame hot-dip galvanized, unpainted * Side walls anodized, unpainted Additional Systems ABERG TPMS tyre pressure and temperature monitoring * Sensors on the rims * Control unit connected to EBS * Developed for semi-trailers and trailers Marking Partial contour marking with Wielton logo * Side white, rear red * Wielton warning stickers * Vehicle designation in German Further features and individual adaptations available at any time – we configure your vehicle according to your requirements. Sample photo. Equipment may vary depending on individual configuration.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / incoming? Also available in various capacities / from €42,500,-- For sale: Wielton Bulk Master tipping semi-trailer 51m³, designed for heavy-duty use in bulk material, agricultural, and mass transport applications. The Bulk Master is available, depending on the configuration, with hopper capacities from approximately 37 m³ to approx. 67 m³. Note: The equipment described below refers to a current stock or pre-ordered vehicle. Dimensions, weights, volumes, and equipment may vary depending on the specific vehicle, production status, or individual customer configuration. ----Dimensions / Weights - Overall length: 11,087 mm - Internal length (at mid hopper height): 9,890 mm - Floor length: 9,270 mm - Total width: 2,550 mm - Internal width (at mid hopper height): 2,460 mm - Internal width upper frame: 2,350 mm - Overall height to upper frame: 3,500 – 3,550 mm - Overall height to tarp peak: 3,660 – 3,710 mm - Internal height: 2,100 mm - Track width: 2,040 mm - Fifth wheel to 2nd axle distance: 6,710 – 6,810 mm - Saddle height: 1,150 – 1,200 mm - Axle spacing: 1,310 – 1,410 mm - Rear overhang: 1,362 mm - Floor height: 1,400 – 1,450 mm - Max. height with tilted hopper: 9,860 – 9,910 mm - Gross weight: 36,000 kg - Technical gross weight: 42,000 kg - Axle load: 8,000 kg (technical 9,000 kg) - Fifth wheel load: 12,000 kg (technical 15,000 kg) - Loading volume: approx. 51.1 m³ - Manufacturer designation (homologation): NW-3 - Tare weight: approx. 6,146 kg (weight information ±3% tolerance) ----Chassis / Equipment - Steel underrun protection - Folding underrun protection at rear - Unladen fifth wheel height approx. 1,150 mm - SAF disc brake axles 3 × 9,000 kg, 22.5" INTRADISC CD - 1st axle as lift axle - Tyres 6 × 385/65 R 22.5 (manufacturer of your choice) - Toolbox 165 l, mounted left, central - Water tank 30 l, mounted right, central - Holder for dust bag - Shovel and broom mounted on front wall ----Body / Hopper - Combi-door version - Volume: 51 m³ - Front wall inclined at 20° - Side walls HD, inner thickness 3.9 mm, fully welded - Internal height 2,100 mm - Double-wing aluminium combi door (vertical) with portal beam - 2 grain chutes - 2 lower tension locks - Pallet-width version - Floor cross beam spacing 360 mm - Floor thickness 5 / 7 mm - Tension chain between side walls - Operator station on front wall, access left in direction of travel ----Tarp - PVC rolling roof, 680 g/m² ----Brake System / Pneumatics - Aluminium air tanks - Spring pressure gauge - Automatic lowering during tipping, can be deactivated - WABCO braking system 2S/2M Cedoypa Ekepfx Altoha ----Hydraulics - HYVA hydraulic cylinder, eye mounting at top - Tipping angle indicator ----Electrics - Full LED lighting - 2 LED work lights on side underrun protection - 2 LED reversing lights - 2 × 7-pin + 1 × 15-pin, incl. EBS connection (no connecting cables to tractor unit) - LED lighting Aspöck ECOLED II with flashing side marker lights ----Additional systems - ABERG TPMS tyre pressure and temperature monitoring - Control line for lift axle from cab ----Paintwork - Chassis: RAL 7021 black grey - Body: RAL 9006 white aluminium - Tarp: RAL 9006 white aluminium ----Other volumes (approx. 37–67 m³), features, and custom modifications available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, Equipment: ABS, New vehicle / stock vehicle / arriving soon? Also available with individual configuration / from €20,900,-- For sale is a Wielton central axle trailer, designed for professional use in swap body operation and distribution transport. Note: The following specification describes a current stock or pre-ordered vehicle. Deviations depending on vehicle, production status, or individual customer configuration are possible. --- Chassis / Frame Steel construction made of high-strength S700 fine-grained steel * 2 axles, SAF, technical capacity 9,000 kg per axle, disc brakes * Air suspension with special lift, 450 mm * Steel air tanks * Lift and lower valve * Fixed drawbar, bolted towing eye Ø 50 mm according to DIN 74053, suitable for low coupling systems, adjustable length to tractor unit * 2 crank supports front / 2 crank supports rear * Equipment for transport of swap bodies according to PN EN 284 – C745 / C782 * Standard support heights 1,120 mm / 1,320 mm * 6 guide rollers --- Chassis Accessories 2 plastic wheel chocks with holder * 4 PVC mudguards with anti-spray spray protection system * Side underrun protection according to ECE * Rear underrun protection according to ECE * 1 toolbox * 1 spare wheel with holder --- Brake System / Pneumatics Brake system according to ECE * Premium brake system WABCO Bounce Control * Two-line compressed air brake system according to ADR * ABS / EBS system 2S/2M with RSP * Aluminum air tanks Cedpfsypa Niox Alteha --- Lighting and Electrics Full LED lighting Aspöck ECO LED * Multi-chamber rear lights * LED marker lights * LED rear fog light * LED indicators * LED license plate light * LED side marker lights * Plug connection 1 × 15-pin --- Wheels and Tires Steel rims with TPMS * Premium tire brand Goodyear / Continental or Bridgestone (manufacturer's choice) * 5-fold tires 385/55 R 22.5 --- Surfaces / Paintwork Steel parts, frame, and drawbar galvanized * Axles: Black * Rims: Silver * Wheel hubs: Black * Side underrun protection: Anodized * Lighting bracket / rear underrun protection: White --- Further equipment and individual adaptations possible at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may differ depending on configuration.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / incoming? Also individually configurable / from €38,600 -- For sale is a Wielton box semi-trailer, designed for professional use in general cargo, pallet, and distribution transport. Note: The following specification describes a current stock or pre-ordered vehicle. Deviations depending on vehicle, production status, or individual customer configuration are possible. ----Chassis / Frame 19 pairs of lashing rings ----Axles and Running Gear 3 axles, each with a 9,000 kg load capacity * SAF axles with air suspension and disc brakes (ET120) * Brake discs Ø 430 mm * 1st axle as a lift axle * 2 mechanical landing legs, manufacturer SAF ----Chassis Accessories Large roller bumpers at the rear frame * 2 large PVC toolboxes, each 165 liters, behind the aggregate * Rear underrun guard made of steel according to ECE Cjdpfxjypa Eqs Alteha * PVC mudguards, quarter-shell with anti-spray splash protection system * Spare wheel basket ----Brake System Dual-line compressed air braking system by WABCO, ADR-compliant * Steel air reservoirs for brake system and air supply ----Lighting and Electrical Aspöck ECO LED multi-chamber full-LED rear lights * 2 × 7-pin + 1 × 15-pin sockets at the front * EBS socket ----Wheels and Tires 6x 385/65 R 22.5 tires * 6 × steel rims 11.75 × 22.5, ET120 * 6 × premium BRIDGESTONE brand tires * Protective caps for wheel nuts ----Floor All-around sealed floor joints * Floor end plate, 270 mm deep across the entire width at the rear * Forklift accessible up to 7,500 kg axle load ----Body Box body made of 20 mm plywood sandwich panels with metal outer layers * Aluminum corner posts, bonded and screwed * Roof structure lightly insulated * Front wall interior reinforcement made of plywood, 1,400 mm high * 1 row of load securing rails on both sides at 1,200 mm height * Double-deck rails including support beams * 1 document box A5 * Side underrun protection, 260 mm high * Rear wall with double-wing doors, each with 2 internal locking rods ----Documents Load securing certificate according to VDI 2700 / DIN EN 12642 XL * Document holder at the front wall, DIN A4 * Operating manual in German/English ----Additional Systems TPMS tire pressure monitoring * Sensor on each wheel * Indicator light on the chassis frame * CAN bus signal to the tractor unit * Control line for lift axle from cab ----Further equipment and individual customizations available at any time — we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: used, empty load weight: 6,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2023, loading space length: 10,120 mm, loading space width: 2,460 mm, loading space height: 2,080 mm, loading space volume: 51 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, mileage: 197,911 km, Equipment: ABS, Unladen weight: 6040 kg, permissible total weight: 36000 kg, cargo space (L W H): 10,120 mm x 2,460 mm x 2,080 mm, tire size: 385/65 R22.5, cargo space volume: 51 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, lift axle at the front, electronic braking system EBS, swing-out tailgate (flush-mounted), grain discharge slide, roof tarpaulin, platform, connection plug 1x15 and 2x7 pole, aluminum rims. You can find our complete vehicle range at [website address]. Do you require financing? With our value-added services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Chedpfxjy U Tays Altea

Condition: used, empty load weight: 6,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2023, loading space length: 10,120 mm, loading space width: 2,460 mm, loading space height: 2,080 mm, loading space volume: 51 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, mileage: 208,912 km, Equipment: ABS, Unladen weight: 6040 kg, permissible total weight: 36000 kg, cargo space (L W H): 10,120 mm x 2,460 mm x 2,080 mm, tire size: 385/65 R22.5, cargo space volume: 51 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system EBS, swing tailgate (flush-mounted), grain discharge slide, roof tarpaulin, platform, connection plug 1x15 and 2x7-pin, aluminum rims. You can find our complete vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Codpfx Ajy U Ta Hsltsha

Condition: used, empty load weight: 6,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2023, loading space length: 10,120 mm, loading space width: 2,460 mm, loading space height: 2,080 mm, loading space volume: 51 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, mileage: 207,773 km, Equipment: ABS, Unladen weight: 6040 kg, permissible total weight: 36000 kg, cargo space (L W H): 10,120 mm x 2,460 mm x 2,080 mm, tire size: 385/65 R22.5, cargo space volume: 51 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, lift axle in the front, electronic braking system (EBS), swing-out tailgate, grain discharge chute, roll-over tarpaulin, platform, connector plug 1x15 and 2x7 pin, aluminum rims. You can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We would be happy to advise you. Codoy U Tbdspfx Altoha

Condition: used, empty load weight: 6,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2023, loading space length: 10,120 mm, loading space width: 2,460 mm, loading space height: 2,080 mm, loading space volume: 51 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, mileage: 222,230 km, Equipment: ABS, Unladen weight: 6040 kg, permissible total weight: 36000 kg, cargo space (L W H): 10,120 mm x 2,460 mm x 2,080 mm, tire size: 385/65 R22.5, cargo space volume: 51 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underride guard, lift axle at the front, electronic braking system EBS, swing tailgate (hinged), grain conveyor, tarpaulin roof, platform, connection plug 1x15 and 2x7-pole, aluminum rims. You can find our complete vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Cjdoy U Ta Tjpfx Altsha

Condition: used, empty load weight: 6,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2023, loading space length: 10,120 mm, loading space width: 2,460 mm, loading space height: 2,080 mm, loading space volume: 51 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, mileage: 209,961 km, Equipment: ABS, Unladen weight: 6040 kg, permissible total weight: 36000 kg, cargo space (L W H): 10,120 mm x 2,460 mm x 2,080 mm, tire size: 385/65 R22.5, cargo space volume: 51 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, lift axle at the front, electronic braking system EBS, hinged tailgate (flush-mounted), grain chute, tarpaulin roof, platform, connection plug 1x15 and 2x7-pin, aluminum rims. You can find our entire vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Chsdpfey U Tbkjx Altea

Condition: used, empty load weight: 6,770 kg, maximum load weight: 36,230 kg, overall weight: 43,000 kg, axle configuration: > 3 axles, first registration: 05/2024, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, color: blue, Year of construction: 2024, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, loading / cargo securing * TÜV inspections, registration service Csdpfey Uaatox Altjha * Transportation of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, axle configuration: 3 axles, first registration: 05/2014, loading space length: 9,900 mm, loading space width: 2,450 mm, loading space height: 2,250 mm, loading space volume: 55 m³, total width: 2,500 mm, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - EBS - Sliding roof Chodpjxt R U Nofx Altja = More information = Applicable material: Grain Empty weight: 5.950 kg Carrying capacity: 30.050 kg GVW: 36.000 kg Selling price: € 18.500, US$ 21.550 Technical inspection expiration date: 2025 Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2025, loading space length: 13,630 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, total length: 13,830 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, wheelbase: 9,010 mm, color: white, Year of construction: 2025, Equipment: tail-lift, Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 100%; Tyre profile right: 100% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 100%; Tyre profile right: 100% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 100%; Tyre profile right: 100% Chsdpfx Asy Sxbqoltsa Empty weight: 6.990 kg Carrying capacity: 35.010 kg GVW: 42.000 kg Tail lift: Dhollandia, 2500 kg Registration number: OV-34-VT 2 Pieces Avaible Extra batteries Isolated roof 1 x Binding rails

Condition: used, empty load weight: 5,600 kg, axle configuration: 3 axles, first registration: 07/2022, loading space volume: 28 m³, tire size: 385/65 R22,5, color: white, Year of construction: 2022, Tare weight: 5600kg, Tyre size: 385/65 R22.5, Loading area volume: 28 m³, 1st axle: , 2nd axle: , 3rd axle: , Lift axle front, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Chodpfxjycmane Altja

Condition: used, empty load weight: 5,600 kg, axle configuration: 3 axles, first registration: 09/2022, loading space volume: 28 m³, tire size: 385/65 R22,5, Year of construction: 2022, Tare weight: 5600kg, Tyre size: 385/65 R22.5, Loading area volume: 28 m³, 1st axle: , 2nd axle: , 3rd axle: , Lift axle front, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Chjdpfx Asycmazeltsa

Condition: used, empty load weight: 5,600 kg, axle configuration: 3 axles, first registration: 07/2022, loading space volume: 28 m³, tire size: 385/65 R22,5, color: white, Year of construction: 2022, Tare weight: 5600kg, Tyre size: 385/65 R22.5, Loading area volume: 28 m³, 1st axle: , 2nd axle: , 3rd axle: , Lift axle front, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Cjdpjycma Usfx Altoha

Condition: used, maximum load weight: 29,947 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 04/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,560 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, Strong Light Curtain Side Semi-Trailer Fifth Wheel Height: 1145 mm Side Loading Height with Lifting Roof and Internal Height 2700 / 2610 mm Side Loading Height without Lifting Roof and Internal Height 2700 / 2560 mm Neck Height: 120 mm Overall Length: 13,830 mm Platform Internal Length: 13,620 mm Overall Width: 2,550 mm Platform Internal Width: 2,480 mm Internal Width Between Stanchions: 2,480 mm Internal Width Between Longitudinal Beams (without lifting roof): 2,480 mm Internal Width Between Longitudinal Beams (with lifting roof): 2,430 mm Axle Spacing: 1,310 mm Kingpin to 1st Axle Distance: 6,390 mm Technically Permissible Gross Weight: 42,000 kg Technically Permissible Axle Load: 9,000 kg Technically Permissible Fifth Wheel Load: 15,000 kg Accuracy: +/- 4% n.d. External Height: 4,000 mm Unladen Weight: 6,053 kg Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel area. Welded construction, weight-optimized, made from high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Floor made of 30 mm phenolic resin plywood, load capacity 7.5t plus steel chequer plate at rear approx. 270 mm deep Steel lamp carrier Lashing rings - 19 pairs, 2T each Rubber bumpers at rear Rigid rear underrun protection Steel rear underrun protection Axles and Suspension Number of axles: 3 Rigid axles No axle lift on 3rd axle BPW disc brake axles 3x9000 kg, 22.5 ECO PLUS 3 clamp BPW ET=120 1st Lift axle Fifth wheel height: 1145 mm Landing Legs SAF Hercules two-speed landing gear, full load Fenders PVC fenders – 1 shell, 2 front, 2 rear Rims 6x aluminum rims 22.5x11.75 ET-120 ALCOA DURA BRIGHT Tyres 6x tyres 385-65-22.5, manufacturer optional Other Chassis Equipment Warning panel mounted on rear underrun protection Bozamet 32 pallet box Two chocks with mountings Body Internal height: 2,700 mm Top boards – 4 rows 1st row: aluminum side boards, H=100 mm, 8 pcs. Lifting roof (0, +50) Side curtains with 18 curtain tensioners, side curtain 900 g/m² Aluminum front wall Front wall collision protection (plywood), H=1,500 mm 2nd row: aluminum side boards, H=100 mm, 8 pcs. 3rd row: aluminum side boards, H=100 mm, 8 pcs. 4th row: aluminum side boards, H=100 mm, 8 pcs. Quick-release curtain tensioner at front Curtain tensioning device at rear Sliding roof, both sides openable, EDSCHA HYBRID Rear wall with aluminum double wing doors Brake System/Pneumatics Aluminum air reservoir Brake system (Knorr, Wabco, Haldex), manufacturer optional RTR automatic self-leveling (Standard brake system Wabco or Knorr with H-S valve) Chassis Paintwork Chassis painted in RAL 3002 (Carmine red) KTL coating Curtain Colour Side curtain colour Roland 3015 ~ RAL 3002 (red) Other Equipment Paintwork Csdpow N Ua Nefx Alteha Two-sided paintwork (powder coating) for front wall, doors, and corner posts Additional paintwork in RAL3002 (Carmine red) Electrics 2x 7-pin + 1x 15-pin connections with EBS connection, without connecting cables to the tractor unit Hella LED EASYCONN lighting Markings Partial contour marking with Wielton logo Partial contour marking, side white Partial contour marking, rear red Wielton warning stickers Labelling in German Certificates/Homologation XL Certificate Beverage Certificate All details are subject to change. Errors excepted. Subject to prior sale.

Condition: used, maximum load weight: 29,441 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2024, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Fifth wheel height 1120 * Side loading height with lifting roof and interior height 2750 2655 mm * Side loading height without lifting roof and interior height 2750 2610 mm * Total length 13830 mm * Platform interior length 13620 mm * Total width 2550 mm * Platform interior width 2480 mm * Interior width between stanchions 2480 mm * Interior width between longitudinal members (without lifting roof) 2480 mm * Interior width between longitudinal members (with lifting roof) 2430 mm * Neck height 105 mm * Axle spacing 1310 mm * Axle spacing kingpin 1st axle 6390 mm * Technically permissible total weight 42000 kg * Technically permissible axle load 9000 kg * Technically permissible fifth wheel load 15000 kg * External height 3975 mm * Empty weight 6559 kg * Railway code certificate P386 Chassis Steel lamp holder 19 pairs of lashing rings Floor made of screen-printed plate 30 mm Load capacity 7.5 tonnes + steel checker plate at the rear approx. 270 mm deep Rollers Ram buffer at the rear (WIELTON) Pallet stop with lashing holes Steel rear underrun protection Composite - side impact protection Liftable rear underrun protection Axles and suspension Number of axles 3 Rigid axles SAF disc axles 3x9000 kg 22.5 INTRADISC KNORR clamps Brake discs diameter 430 mm Fifth wheel height 1120 Hubodometer Support legs SAF Hercules 2-speed gearbox supports, full load Rims 6x steel rims 22.5-11.75 ET-120 Protective caps for wheel nuts Tires 6x tires 385-65-22.5 Other chassis equipment TIR sign, foldable Tensioning belt with ratchet 7 tons - 8 pieces Fire extinguisher 6 kg Ship fastening straps 4 pairs Two wedges with fastening A-sign, foldable ADR sign, foldable Codervu Nzepfx Altsha Fire extinguisher box on the front wall Tool box - 165L Railway coding number P 386 F1 Side loading height i.L.: 2,530 mm F2 Internal height i.L. under roof: 2,575 mm Construction Lifting roof (0, +50) Top slats - 7 rows Side tarpaulins with eyelets (at least 24 tarpaulin tensioners) Tarpaulin tensioning device at the front secured with a flap and customs rope (TIR version) Tarpaulin tensioning device at the rear Tarpaulin tensioner with additional lock Customs version on the outer frame with safety lock Sliding roof on one side from back to front EDSCHA HYBRID (TIR version) Aluminum bulkhead with customs eyelets Rear wall as aluminum double-wing door Screen-printed plate 6 mm H=1500 mm 2x transparent tarpaulin pockets for ADR labels Painting of other equipment 2-sided painting (powder coating) bulkhead, doors, corner stanchions Additional painting - color RAL5002 (ultramarine blue) Electrics 2x7-pin + 1x15 pole with EBS connection, without connecting cables to the tractor unit Lighting Hella LED EASYCONN version Rail / Intermodal equipment consisting of Axles with extended air bellows and adaptation of piggyback frame with gripper edges in accordance with Bach specifications Railway coding number P 386 Roller ram buffers at the rear, right and left RoRo Ferry Lashings Intermodal 5-fold ILU code, attached to the tarpaulins on the left and right, on the front wall, on the rear wall and on the roof Positions marked in yellow on the side in the area of the gripper edges (Rail) Side tarpaulins with 24 tarpaulin tensioners in accordance with railway specifications (Complies with the DAIMLER load securing guideline DL 9.5) Roof tarpaulin in accordance with railway specifications All information without guarantee. Errors subject to change. Subject to prior sale.

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Codsutz Uyepfx Altjha Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: used, functionality: fully functional, machine/vehicle number: SUDNW300000043926, empty load weight: 7,750 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: black, Year of construction: 2015, Equipment: ABS, Good condition Codpfoyvyt Aox Altjha